Cannot connect Wii, TV,

Today, three of our internet-enabled devices, Wii, TV, and BD player, quit connecting to the internet.  Our computers (macbooks and an iMac), iPads, and iPhones connect just fine.  The iMac and the three internet enabled devices use a wired connection; the others are connecting wirelessly.  Cox Communications, our internet/cable TV provider, says that the problem must be with our router.  That router is a 1TB Time Capsule. 
Any suggestions on how to correct this problem?

*Similar problem:* Time Machine Wireless (Airport Extreme Base Station) died & replaced new by Apple!... now that I have the wireless re-setup my MacBook Pro is able to connect to the Internet. My Apple TV connects (via Ethernet) also to the internet BUT sync between MBP & ATV is now lost!!
+I cannot see ATV in my iTunes... have tried various... unplug all connections, restart & reboot -all hardware: MBP, aTV, router, ADSL Modem; turn off Firewall+ still cannot sync or see ATV, also tried wireless instead of Ethernet without any success!
Any suggestions gratefully received.

Similar Messages

  • Cannot connect Wii to the Internet - Error message...

    Hi.
    I cannot get the family Wii to connect to the internet.  Instruction for doing so were followed correctly.  An error message - error 51330 comes up on the screen.   Advice on how to resolve this problem would be much appreciated.  All other wireless enabled devices are connecting okay. 
    Thanks - Guard

    Hi try this it may help
    Usually the error code means that:
    A: You chose the wrong Wi-Fi security (i.e. your Wi-Fi security is WPA but you chose WEP)
    B: You entered the wrong password
    C: Your Wii's MAC address is not allowed (If your Wi-Fi network uses MAC adresses to let certain PCs use the network)
    D: Your wireless router brodcasts a "channel" your Wii isn't compatible with
    E: Your wireless router isn't broadcasting in b/g mode.
    For more reasons and how to solve them, click here:
    http://www.nintendo.com/consumer/wfc/en_…
    Source(s):
    http://www.nintendo.com/consumer/wfc/en_…
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Cannot connect to any gaming services

    I son cannot connect to any gaming services on my Wii U or the computer, even when they are connected to the WiFi network. I can, however, connect to the internet, but not any games. Please help

    see this link
    How do I fix almost all Shockwave and Flash Player issues
    While I work on behalf of HP I'm not speaking for HP but trying to provide best effort support.

  • Apple TV cannot connect to the Internet

    Hi,
    Hope someone can help. I haven't used apple TV for a week or so, and when I have just turned it on again, I found although it finds my wireless network, it cannot connect to the internet as it was doing since I got it over a year ago. No settings have changed, and my MacBook, iMac, iPhone, Wii and PS3 all still connect fine. I tried a system restore, but now apple TV won't start up as it still can't connect to the internet. I have also tried rebooting my router. Does anyone know what might be the problem?
    Thanks for your help,
    Pete

    I have the exact same problem and my home network have a max capacity of 250 devices, which Im not any way near off.
    I have one pc connected via ethernet, so I always have an option of connecting if WIFI fails.
    I have one iMAC connecyed via WIFI
    I have one Apple notebook conenected via WIFI
    I have one Nintendo Wii connected via WIFI
    And, I have one Apple TV which will not connect while other devices are connected. If I disconnect the notebook and iMAC the Apple TV works fine.

  • Macbook Pro Cannot Connect to SMTP

    I am running a 2010 MacBook Pro with OS X 10.6.8.  I use Mac Mail app to send and receive e-mail.  Since Thursday 27th Dec 2012 I have been unable to send e-mail.  I get the grey spinning wheel until the following error message appears:
    The SMTP connection to server “mail.(mydomain).co.uk” failed.
    My outgoing mail server is currently showing as offline.  In fact I have 2 e-mail accounts and both are showing as offline.  No problem receiving mail.  Connection doctor connects fine to incoming mail, but not outgoing.
    I have tried the following (plus other things) without any success:
    Checked all the details, passwords etc
    Changed ports from 25 to 465 and 587
    Checked my IP address - it is not blacklisted
    Removed and re-added e-mail account
    Telnet port 25 - it is not blocked, but appeared to successfully connect (from what I understood from checking www)
    Temporarily disabled firewall
    Re-installed Mac app
    Rebuilt mailbox
    Repaired disk permissions
    Used the repair disk utility
    Deselected SSL and changed various options within "Edit SMTP server list"
    Reset the keychain
    Tried updating software but it says no update available.
    Re-instated an old Accounts.plist (and one other file which I forget, something like com.apple.mail) from time capsule.
    I then set up a hotmail account on Mail app but had exactly the same problem, ie cannot connect with SMTP server.
    However, I set up my e-mail account on my wife's iPad with the same details and there was no problem at all, e-mail sent just fine as it does from my iPhone.  So the issue has to be with my Macbook, right?  Can anyone help before I go and spent £1250 on a new Macbook?  I'm sure I'm missing something obvious.  Thanks in advance for any advice.

    Just FYI, I've had the same problem for months now. I have been accessing my hotmail via the web, but decided to try the OS X Mail app.  I could get emails into the account with no problem but couldn't send.  I read all the blog and support entries and have tried everything they recommended, like changing my computer name to one word, without success.  Then last night, it just so happened that my broadband provider had to change out my wireless modem.  As soon as he plugged in the new one, some emails that had been in my outbasket for a month went through instantly and all of a sudden my Mail, both incoming and outgoing now work.  So I think people need to look at their router settings for the a solution to the problem. 

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Cannot connect to other computers on network

    We have a small office network with 7 macs on it. 5 wired 2 laptops with Airport Extreme.
    We have an 8 port switch where the 5 desktops and the airport connect. When I am on a laptop I cannot connect to any of the desktops. It does not even see them (and same with desktop to laptop) What do I need to do to share these two on the airport

    Configure the AirPort Extreme base station (AEBS) so that it the option to distribute IP addresses is DISABLED. That will place the wireless and wired computers on the same subnet.

  • PI 7.11: Cannot connect to server using message server:...

    Hello Guys,
    we make the Application Management for a Customer PI System.
    Scenario:
    - the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
      SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
    - WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
      Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
    Problem:
    Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
    "Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
    In the Details from the Error Message:
    "<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
    Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
    The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
    Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
    Sorry for my bad English
    Best Regards,
    Markus

    Hi Markus,
    did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
    P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented.  There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
    If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
    (This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
    Solution: Establish a connection without any proxy in between.
      E.g.: a terminal server in the same network
    It would be helpful to find more people with the same problem to force a fix from SAP for that.
    If anyone else is having problems with this, please add a comment to this thread.
    Best regards
    Christian

  • Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

    Hello, everyone, my name is rafl
    I have a problem with exchange 2013 active sync.
    I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
    but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
    (legacy.domain.com)
    the process of moving mailboxes successfully without error.
    Access OWA for exchange 2007 and exchange 2013 is running normally
    access mail from Outlook running normally
    Certificate request has been installed and has no problem with it
    The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
    The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
    ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
    user mailboxes are still on exchange 2007 is not problematic.
    only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
    but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
    only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
    any ideas for this problem, and what should I check on the exchange server ..?

    i have run the activesync test connectivity and get some error :
    Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 3091 ms.
    Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21072 ms.
    Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21049 ms.
    I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
    for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

  • TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

    I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

    Sometimes deleting the account and then re-creating it can solve this issue
    Write down all the information in accounts before doing this
    Highlight the account on the left and click the minus button
    Then click the plus button to add the new account and follow the prompts

  • Cannot connect to iTunes store connection with the server has been reset

    I have updated itunes and now I cannot connect to the itune store says connection is reset but all other programs and internet is working properly. Please help

    Hi!
    Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
    So, what can I do now?
    Thanx

  • Updates in iOS App Store. Cannot connect to iTunes Store

    I have been having an issue with my iPhone. Whenever I tap the updates tab on the bottom of the App Store window it pops up with a message saying that my iPhone Cannot connect to the iTunes Store. It is not an issue with my Wifi connection as I have tried over 3G. It is not my Apple ID as I have reset my password checkede all of my details and it works fine on the same Apple ID on my iPad. It is just my phone. I spent and hour on the phone with Apple Technical Support and they could not troubleshoot it, so put me through to a Senior Advisor. The phone line then cut off from Apples end. Even after I say OK to the message that opens it does not let me see my updates, it just shows a badge. Also the purchased bar in the updates section is not there. I can access the rest of the store as well, like the Top 25, Featured, Categories and Search. Just not my updates. It sounds like something so small it's not even worth it but it gets really annoying!
    The guy at Tech support went through numerous things with me. Signing in and out of my Apple ID and signing in on a different one. Checking my Internet connection. Resetting my network settings. Resetting all of my settings and have you turned it off and on again? I had tried all of those previous to being on the phone with him.
    I was wondering has anyone else had this problem? How can it be solved? Should I take my iPhone into an Apple Store? Should I reset it by erasing all data on it?
    All feedback would be great!
    Thanks

    Hi Hamid,
    I had realised that my iPhone Date & Time settings were not on auto so I can manually change them. Also I had heard rumours that other peoples' iPhones were doing the same thing as mine. I had looked into it for a day or so and found the answer on a website from Google.
    I checked it and it worked!
    Also thanks
    Jack

  • IPad app store message "Cannot connect to iTunes store"

    Recently my iPad (wifi) &amp; my husband's iPhone (AT&amp;T)have been unable to connect to the app store or iTunes. We get the message "cannot connect to iTunes store". The only thing that I have done recently is download a kindle book &amp; add a Bluetooth keyboard. The keyboard was never paired with the iPhone so I don't think that could be the issue. The iPad &amp; iPhone have both been updated, but that hasn't resolved the issue. There was no problem connecting to iTunes through the PC to run the update. Why would both devices suddenly have the same problem? One is wifi &amp; one is 3G so it's not the connection. They have nothing in common except the error. Any help would be appreiciated since this is getting frustrating. Thanks!

    Hi, Thank you!  I did as you suggested but it didn't work.  So, this time I cleared all apps out of the tray, signed out of my account at the store, and did a hard reboot.  Then on my desktop I signed out of my account in iTunes and then synced.  I have signed back into the store on the iPad but still get the same message. 

  • HP Color Laserjet PRO MFP M177FW Cannot connect to web services

    I bought a HP Color Laserjet PRO MFP M177FW  today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me. 
    This question was solved.
    View Solution.

    Hello rasitbolukcu,
    Welcome to the HP Support forums.  I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
    I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document.  It will walk you through ensuring the printer has the latest firmware.  Once you have updated the printer, please try to enable the web services again. 
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • BIB-16633 Cannot connect because the database version is incompatible with

    BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
    Reply
    why is this?
    oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
    at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
    at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
    at oracle.dss.connection.client.Connection.connect(Connection.java:425)
    at oracle.dss.connection.client.Connection.connect(Connection.java:342)
    at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
    at java.awt.Dialog$1.run(Dialog.java:540)
    at java.awt.Dialog.show(Dialog.java:561)
    at java.awt.Component.show(Component.java:1133)
    at java.awt.Component.setVisible(Component.java:1088)
    at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
    at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
    at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
    at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
    at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
    at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
    at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Lisa Sherriff
    Posts: 137
    OTN Member Since: Jan, 2001
    Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
    Reply
    Hi,
    From the 10.1.2 BI Beans Install Guide it says:
    OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
    * Oracle9i Release 2 Enterprise Edition, as follows:
    o 9.2.0.6 for all platforms.
    o 9.2.0.5 with the latest OLAP patch for Windows-only.
    * Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
    From the error message it would appear that the Database is not one of the above.
    Thanks,
    Lisa
    JDev QA
    401488
    Posts: 48
    OTN Member Since: Aug, 2002
    Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
    Reply
    Hi,
    Please note that we have follwing versions of DB up and running:-
    1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
    With the Partitioning and Real Application Clusters options
    JServer Release 9.2.0.5.0 - Production
    Pls let us know the solution to resolve this problem ASAP.
    Thanks.

    You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
    10g - 10.1.0.3 with additional OLAP patch
    9i - 9205 with additional OLAP patch
    9i - 9206
    I would suggest that you have not applied all the required database patches to your instance.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oraclc Corporation

Maybe you are looking for