Cannot connect with canon mg6150 wirelessly

running 10.7.1 lion on macbook. will not connect wirelessly to canon mg6150 printer. must plug in wire to printer in order to work, but then i cant use windows hp noteboot wirelessly which does work fine with printer. any suggestions greatly appreciated. ken

Similar Messages

CANNON EOS 7D get message as "cannot connect with battery" What can i do to fix this problem?

when i turn on the camera and its trying to read the battery the message i get is " cannot connect with battery" i thought it was a defective battery and went out and bought a new one and still kept getting the same message. what can i do ? Does anybody been through this situation from what i hear this is common on the CANNON EOS 7D models only why is that?

Yes! It is a factory defect and Canon should recall 7D and 60D for this problem in stead to charge $230 for their own quality issue. I have 7D and not using it that often, it shows the same error message. Cleaning can not fix it at all! It was the soldering bad point at the battery and the little circuit board next to it, based on an engineer who repaired it by himself. Canon pro's: If you guys are cate about the Name of Canon then take these cameras back and fix them for free! Otherwise, the customers will switch to Nikon soon.

ITunes cannot connect with this iPad Error/iOS 5 problem

It appears that ever since upgrading to iOS 5 and opting to sync my first gen iPad wirelessly, I have been receiving an error message each morning stating "iTunes cannot connect with this iPad..."
The wireless sync capability works fine, I plug my iPad into the wall when I come home, and it starts pushing and pulling all the new apps that I've downloaded in the day.
It appears that iTunes is will regularly try to connect with the iPad while it is charging. At some point during the evenings, either my iPad will be asleep or my iMac will be asleep. I think this is where the connection problem is arising.
Does anyone know how to change iTunes' frequency of wireless sync to a device that it is wirelessly connected to? Ideally, I'd like it to only sync wirelessly once when I plug the iPad into the wall.

See if this page helps : http://support.apple.com/kb/TS3221

New to the iphone, I cannot connect with the bluetooth to other devices, any help?

I have a new IPhone 4, I cannot connect with other bluetooth devices - any help??

What, exactly, are you trying to pair your phone with? These are the only supported bluetooth profiles:
http://support.apple.com/kb/ht3647

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

My 4th gen. shuffle keeps on sending me an error message that it cannot connect with iTunes because it's not formatted properly.

Hi,
About two days ago my shuffle started to send me an error message that it cannot connect with iTunes because it's not formated properly.
So I've already updated the softwer, I tried to use it with every single USB port on my computer and searched for solutions on the net but couldn't find any useful information...
I literally see the following message: The iPod "194" cannot be used with iTunes because it is not formatted properly.
Any ideas?....
Thank you!

If you cannot access the iPad because of the passcode, you have no choice but to restore it using the same steps that you would use if you forgot the passcode.
iOS: Forgotten passcode or device disabled after entering ...

Unable to use Internet Connect with my new wireless device

I just received a new wireless device for my macbook pro. Normally I sign on with Internet Connect, but after setting up the new card, I can only connect using Verizon Manager, which usually doesn't give me good connection, I don't know why.
I called the Verizon people, they mostly are clueless as to how I was able to sign on using both Internet Connect and Verizon Manager before with my old card. I remember there's a way of setting up manually if you want to use Internet Connect. Problem is, when I went to Systems Preferences and clicked on Network, a pop up prompt saying "your network setting have been changed by another application" keeps popping up even as I keep closing it. ***?!!! How can I get rid of it so I can change network setting manually?
I just want the option of connecting with Internet Connect with my new wireless device. BTW, when I try connecting with it using my old setting National access/ Broadband access , I get a message saying "the selected communication device does not exist".

"I just received a new wireless device"
If not from Verizon, then who? Did it come w/a manual? If not, have you contacted the vendor/manufacturer for instructions?
==========
"A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting"
!http://i50.tinypic.com/izvwo1.gif!

HT1689 I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?

I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?

Same for me with Iphone 5 and IOS 7 on mac pro. Install ITunes 11.1 and after reboot nothing work. Work only with Mac Pro in safe mode.
I have uninstalled Wi-fi-sync1.0 app from MacPro and Itunes sync well with iphone.

PSE 12 - Cannot connect with Adobe

I cannot connect with Adobe through PSE12. The first time the message told me Help did not install and to uninstall and reinstall, which I did today. I still cannot connect; yet, I was able to register the serial numbers for both elements and premiere.
In trying resolve the problem, I got another message that indicates there is no internet connection. I have analyzed the install log and nothing there indicates an error in installation.
I still have PSE 10 on my computer and can connect direct when in 10.

No. I tried the "activation-network-i ssues" before 2 times.
0. Patch installed
1. I have/had internet connection
2. I can call https pages
3. drivers/etc/Hosts was/are clean.
4. Current User > Trusted Root Certificate Authorities > Certificates is installed/enabled and the correct fields are checked
5. Firewall was/is turned complety off.
I cannot uninstall AAM. Because i can't find it in "Deinstallation Tool" of Win8. It is not listes. There is only Adobe Flash Player listed.
I removed AAM via adobe cleaner tool. And installed it again. And this helped not too.
Any ideas how i can solve the problem?

I need a request code for offline activation. Because i cannot connect with adobe server for online activation. But I receive "The request code is invalid." by generate answer code.

I need a request code for offline activation. Because i cannot connect with adobe server for online activation. But I receive "The request code is invalid." by generate answer code.

Dear Anubha,
I hope these windows illustrate what I am facing.
The above window shows the prompt that the software requires activation.
The version is 8.1.0.
This next window is the point where I select activation by phone.
This final window shows that the "response code" is not returned. I get an
"Activation Number" instead.
Steven
On Tue, Jan 27, 2015 at 10:50 PM, Anubha Goel <[email protected]>

I cannot create a new business catalyst site with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with server, try again later. How can I fix this problem?

I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
Thanks

Hi Ozy08,
Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
Thanks,
Preran

TS1394 how can i get upgrade the ios x v 10.5.8? I purchased an iphone 5 but cannot connect with my macbook 5. I cannot update itune 11 as my ios is not up to date

how can i get upgrade the ios x v 10.5.8? I purchased an iphone 5 but cannot connect with my macbook 5. I cannot update itune 11 as my ios is not up to date

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is once again available from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.

Upgraded iPad3 to iOS6.1 and cannot connect with Cell service. Does anybody have a fix?

I just upgraded my iPad3 to iOS6.1 and now I cannot connect with Cell service. Says its "Searching". Everything else appears to be working. Does anybody have a fix? Thx!!

full update

"The BlackBerry Desktop Software cannot connect with this device." after repair

I download the Desktop Software for BlackBerry onto my Mac Book Pro for the first time.
After installing I connected my PlayBook. I get the message "The BlackBerry® Desktop Software cannot connect with this device."
The program suggested I repair the device software, so I did. After that I set it up and ran the updates.
When I plug it back in I get the exact same message.
What should I do next?
co-founder of Diaree | BB Dev for PictureThis

I also cannot connect to my two playbooks using desktop manager on mac.
One of the two playbooks is now shipped back to rim for repair (see here http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/5MP-Playbook-Camera-Blackscreen-Errors-Ha... The issue of desktop manager not being able to connect to the playbook started with this playbook when the repair I was prompted to to stopped 1/4 way into it. Multiple retries did not make any difference.
Since then, I have tried connecting my other (functioning) playbook to the same mac but when I plug in usb cable I get the same "cannot connect" errmsg and prompted to "repair". I am definitely NOT going to "repair" this one. So I uninstalled the desktop manager and reinstalled it to see if it makes a difference. Unfortunately it did not and I get the same "cannot connect" errmsg.
If anyone has any suggestion how this issue can be resolved that would be great. I think something is stuck on the mac and is not getting wiped out when desktop manager is uninstalled. Thanks.

Lately have a problem forwarding email from FoxNews,I click on Goggle to use it says Safari cannot connect with the server, have tried deleting cache and cookies and also resetting Safari with no success, can you help me?

LATELY HAVING A PROBLEM FORWARDING EMAIL VIA GOGGLE FROM FOX NEWS ARTICLES, WHEN I CLICK ON GOGGLE I SEE SAFARI CANNOT CONNECT WITH SERVER.
HAVE TRIED DELETING CACHE AND COOKIE, HISTORY AND RESETTING SAFARI WITH NO SUCCESS.
ANY HELP YOU CAN GIVE ME TO RESOLVE THIS ISSUE WOULD BE GREATING APPRECIATED.
THIS IS MY FIRST TIME USING THIS FORUM, NEW AT THE COMPUTER WORLD.
HOPE YOU'LL BE ABLE TO HELP ME RESOLVE THIS PROBLEM.
THANK YOU!

It isn't Goggle. Did you make sure you went to Google?

Cannot connect with canon mg6150 wirelessly

Similar Messages

Maybe you are looking for