Cannot connet to extreme in hotels but can at home, any ideas?

travel alot and take my airport extreme with me to hotels that have high speed internet hookups in the rooms. when i hook it up to my extreme to give me wireless access, i can't pick up the signal, although it works fine at home. any ideas?

When using the Airport Base Station with a hotel's ethernet network, you often will need to disable its router (uncheck the setting to "Distribute IP addresses" found under the Network tab of the Airport Admin Utility) and then cable the LAN port of the Base Station to the room's ethernet jack.

Similar Messages

  • I cannot receive mail , but can send it , any ideas ?

    This is what appeared on my .mac account .
    I am unable to receive mail .
    Can anyone provide any details ?

    If this is your iCloud email account, sometimes removing and adding it back will fix things.  To do this, go to System Preferences>iCloud, uncheck Mail, restart your Mac, then go back and check Mail again.  You may need to open Mail and go to Mail>Preferences>Accounts, select your iCloud account, select the Account Information tab, then be sure your .mac address is selected in the Alias drop-down list.

  • Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

    Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
    Airport gets it address DHCP.

    Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
    When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
    Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
    Note that the Express will not provide any additional wireless coverage when it "Joins".

  • HT1277 Mail is set up and I can send e mails but since 1st of June I cannot receive, I have tried connection doctor everything seems fine, any ideas?

    Mail is set up and I can send e mails but since 1st of June I cannot receive, I have tried connection doctor everything seems fine, any ideas?

    There are two entirely different paths involved here; SMTP for send and either POP or IMAP receive.  Check your receive path.  Confirm username, password and the POP or IMAP server identity.  Also check directly with your mail provider, and ensure the POP or IMAP server is functioning and online, and the provider hasn't changed their particular POP or IMAP configuration requirements.

  • HT5569 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 an

    I updated my 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help.   They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition.   They have no idea why it isn't working, but they could offer to sell me another phone.    This is extremely annoying!    They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

  • Firefox has run before but can't start any more

    Firefox has run before but can't start any more.
    I tried the solutions proposed but it doesn't work

    Hello,
    See this help Article :
    [[Firefox won't start - find solutions]]
    ---------------------------------------------------------------------------------------------------In case you want to do something straight away, try a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    * Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    * After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    * Delete the Firefox installation folder, which is located in one of these locations, by default:
    * Windows:
    * C:\Program Files\Mozilla Firefox
    * C:\Program Files (x86)\Mozilla Firefox
    * Mac: Delete Firefox from the Applications folder.
    * Linux: If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Install Firefox on Linux]]. If you downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    * Now, go ahead and reinstall Firefox:
    * Double-click the downloaded installation file and go through the steps of the installation wizard.
    * Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found here.
    '''''WARNING:''''' Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be recovered unless they have been backed up to an external device!
    Please report back to see if this helped you!

  • HT201320 I am having trouble with my wife's new iPhone 5s. She can receive her telus email but can not send any email what did I do wrong in setting up her account?

    I am having trouble with my wife's new iPhone 5s. She can receive her telus email but can not send any email what did I do wrong in setting up her account on her iPhone? I tried to just copy the info from her old iPhone.

    The sending of email is accomplished via the SMTP server. Take a moment to get back into Settings>Mail, contacts, calendars and select the account. Go to the SMTP server and check to make sure that username and password are entered in all of the appropriate places. If you cannot get it to work after trying to just change those settings, remove the account from the phone and recreate it. When recreating, make sure you enter the username and password in every location, even if the phone says optional. Make sure you have the settings from either the email provider or from the other device. Make sure that SSL is on or off as necessary.

  • TS1629 How do I use home sharing with direct TV / Verizon internet. I have turned on Home sharing on apple tv and in iTunes but can't see the library in apple tv. I can see the photo stream but thats it. Any Ideas????

    How do I use home sharing with direct TV / Verizon internet. I have turned on Home sharing on apple tv and in iTunes but can't see the library in apple tv. I can see the photo stream but thats it. Any Ideas????

    go to home-sharing on Apple TV and type in your info as ask.
    hope this help

  • HT1751 After "Restoring iTunes Library Backup" it wont link to the files in the iTunes folder. I've followed the correct procedure, and iTunes lists all my music correctly (but with no artwork), but can't locate any of the files. Using Windows 7. Help ple

    After "Restoring iTunes Library backup" it wont link to the files in the iTunes folder. I've followed the procedure as described, and the iTunes folder is in the correct location. iTunes lists all my music correctly (albeit with no artwork), but can't locate any of the files.
    I've been restoring my iTunes folder from a backup hard drive to a new computer on which I've downloaded the latest iTunes (10.7). If this is a newer version than the one I backed up with could this be the problem? (I had the latest (to my knowledge) iTunes when I backed up the folder about 3 weeks ago, was this version 10.7?)
    Or is the version of iTunes (within recent updates) not an issue when restoring a library?
    Using Windows 7.
    Any help please?

    From the top of the page where the scripts live...
    The general method of use is to download the script to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist. Some scripts offer a choice of track by track confirmation of changes or fully automatic processing of the selection. Many of the scripts can optionally display a progress bar while running.
    You are strongly advised to backup your entire library, or at the very least the iTunes Library.itl file, before use. Test the behaviour of your chosen script on a small group of files first to make sure it does what you want before applying it to large numbers of files.
    Most builds of Windows will execute *.vbs scripts when you double-click them. If that doesn't happen then you might need to visit the Add/Remove Programs or Programs & Features control panel to enable the Windows Scripting Host. I can track down details if you have issues.
    Backing up and restoring data is an area that is often glossed over. Most people don't try to learn much about it until they've lost something important. (Me too )
    If your iTunes library was in the usual layout then normally copying the whole iTunes folder from the User's Music folder in the old computer to the User's Music folder in the new one will usually work fine. Ideally this is done before iTunes is installed so that there is no empty library to replace, and all settings are picked up from the old library. This post contains more details.
    tt2

  • HT203167 I bought a new computer and am trying to get my library to the new one and purchase some more music.  I downloaded itunes but can't get any further.  thanks

    I bought a new computer and am trying to get my library from the old computer to the new one and download some more songs.  I have downloaded itunes to my new computer but can't get any further.  sorry, I am a computer dinosaur.  Thanks for your help.

    You need to contact Apple, either through the link in that article or by phoning them and asking for the Account Security team.
    (85855)

  • The share button disappeared from my Facebook add-on just before I upgraded to Firefox 5.0. I thought by upgrading and reinstalling the add-on it might come back, but it didn't. All other FB buttons are there, near as I can tell. Any ideas? I'm using XP3.

    The share button disappeared from my Facebook add-on just before I upgraded to Firefox 5.0. I thought that maybe by upgrading and reinstalling the add-on it might come back, but it didn't. All the other FB buttons are there, near as I can tell. Any ideas? I'm still using XP3.

    Hello,
    I had the same problem with finding this file.
    There's no such file in Mac OS X version of Skype. But there's a directory for your Skype user account in /Users/%current_user_name%/Library/Application Support/Skype/
    try:
    quitting Skype
    renaming old folder
    signing into the Skype

  • I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

    I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

    Which iBook do you have?
    http://support.apple.com/kb/HT1772?viewlocale=en_US
    Which version of the OS is installed, and which version are you trying to install?
    You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

  • I updated my first generation iPad to version 5.1.1 and won't go past the setup screen that asks if I want to use the iPad locator. I can go back but can't get any further.

    I updated my first generation iPad to version 5.1.1 and won't go past the setup screen that asks if I want to use the iPad locator. I can go back but can't get any further

    I just updated my original iPad 32 GB WiFi to iOS 5.1 about fifteen minutes ago.  But I did it with the system restore feature in iTunes.  So it wiped out everything on my iPad.  But it did work.  Then I restored an earlier backup and all went fine.  Maybe you could try backing up your iPad and then using Restore to get it back to factory settings to see what happens. 

  • I paired magic mouse with my laptop in windows, but can't scroll, any solution ?

    I paired magic mouse with my laptop in windows but can't scroll, any solution ?

    Hello:
    Your post lacks enough information to respond intellligently.
    The link below addresses some issues:
    http://support.apple.com/kb/TS3039
    Barry

  • I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

    I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

    Connect to iTunes and try to reset it from there.

Maybe you are looking for

  • Running photoshop pc version

    I have a lot of music software as well as photoshop which I am wondering if I can use and install if I use Windows 8 on my Macbook Pro. Can anyone answer this question? Thanks!

  • BEWARE - 7toX DOES NOT yet WORK with PAL (50HZ)

    Philip Hodgetts wrote: It is neither "shambolic" nor "amateurish" but rather simply unfortunate that one CCIR format was not correctly identified. Sorry Phillip - I think it's shambolic and amateurish that a week on down the line, you still have not

  • Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

    Hello, the above segment is missing in the inbound idoc - basic type pexr2002. I have checked in TC-we30 and its available there. but still the idoc is getting generated without this segment. can someone suggest. thanks Arun

  • Transfer of data from one system to another using ALE

    Hi, I  had created some classes in development system than transfered them to productive system through ale, and in productive system there is lots of trasaction data is created , many sales orders etc . now after some time my user requested that the

  • Log into Device with AAA, how do I get right into enable mode?

    I am using a Cisco ACS server with an RSA server behind it. When the user is authenticated from the ACS server, I want them to go straight into enable mode, not have to type the enable mode password. What line am I missing? aaa authentication login A