Cannot Continue with migration...

while enanbling  the Advanced GL Account determination, l encountered the following error message ' Cannot continue with migration because SAP business one integration EverSender on named server connected to the company database, close this program and reopeat migration'. il have closed the program several times but the message still comes each time i want to enable it. can anyone help me.

Hi,
Please check this thread:
Error while Enabling Advance GL Account option
Thanks.

Similar Messages

  • Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything ov

    Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything over the internet. Any clues?
    == This happened ==
    A few times a week
    == Couple of weeks ago

    Your UserAgent string in Firefox is totally messed up by another program that you installed, and Barclays doesn't know you are using Firefox 3.6.6 - it probably looks like IE 6.0 to that website.
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''general.useragent.'''
    Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
    Then restart Firefox

  • I get an error message beginning with e._em_globals is undefined and then I cannot continue with the e-mail I have to close out and start again

    Here is the entire error message I get in addition to what I typed above (I could NOT copy it - I had to write it down so I could send it to you).
    https://webmail.reagan.com/versions/webmail/8.14.6-RC/popup.php?wsid=0251f407d826d9d121577f50f3052
    Then I have to hit OK and this comes up:
    prevent this page from creating additional dialogs
    This happens if I am in the middle of an e-mail, have to go elsewhere to find info to add to the e-mail and then when I come back, I cannot continue the e-mail. I have to copy the e-mail, save it and start all over.
    Can you HELP me? I use REAGAN.COM for my e-mails.
    P.S. This does NOT happen all the time - I would say one out of every 20 e-mails, but it is way too time consuming when it does happen that I have to start all over again.
    Many thanks.

    It sounds as though a script on the site, or an advertisement, is not working quite right...
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies using either of these. Save any pending work first.
    While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • Cannot continue with a pending enrollment

    I am trying to continue with one of my pending enrollment which is an application for apple enterprise development account. But I kept getting an error message which is "
    We are unable to process your request.
    An unknown error occurred. Please try again.
    I cannot do anything with this enrollment right now.
    Does anyone know how to deal with this situation?
    I appreciate your help a lot!
    Best,
    Bin

    On 8/28/2012 9:46 AM, phfournier csdl wrote:
    >
    > Hi
    >
    > We have some pending events with 1360 try count that i cannot abort.
    >
    > when we try to abort them: A pending Events processing message is
    > currently in progress
    >
    > current state: 10 : Waiting for policy paths to become accessible
    >
    > last error: 27 : File system path already exists.
    >
    > theses account seems to be ok (good homedir, roghts, quotas.)
    >
    > when we try to bypass, abort, we got the message: A pending Events
    > processing message is currently in progress
    >
    > thanks
    >
    >
    phfournier,
    This sounds like something we'd need to work with you directly on.
    Please send an email (if you haven't already) to
    [email protected] If you can, please attach your latest Engine
    log file (found in /var/opt/novell/storagemanager/engine/log by default)
    and a copy of a Runtime Config report from NSM to that email -- those
    are some basic troubleshooting things we'll need. Thanks!
    -- NFMS Support Team
    - NFMS Support Team

  • HT1695 I am visiting from the us and using my iPad using the wifi at my parents home just fine. Just brought one for my Mum and trying to set it up, it will not conect to wifi so cannot continue with set up. Any ideas ?

    I am visiting from the US and using my iPad at my parents house using their WiFi. We brought a new iPad for my Mum and am trying to set it up, I get to step 3 chooses a network and it will not connect to WiFi, the same WiFi that I am using with no problem. Any ideas .

    The first time you set up the iPad you must do it by connecting the iPad to a computer, which needs to be running the latest version of iTunes, using the provided USB cable that came with it.  It cannot be done wirelessly initially.

  • I'm useing 2 different apple ID for the App Store. When I try to purchese a app. It said "cannot continue with purchese"

    What do I do?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I am having problems with migration assistant (windows pc to Mac 2011) When I get to the 'Quit other applications' box and click continue, nothing happens. There are no other apps running - any ideas, please?

    I am having probems with migration assistant. Trying to transfer data from a windows laptop to iMac 2011. It was working fine when I did the set-up yesterday, but it was going to take hours to transfer some videos so I quit the process with the intention of doing it again at a later stage. However today I find that everytime I get to the 'Quit other applications' box on the Mac and click 'continue', nothing happens. Have checked mission control and confirmed no other apps running. Tried several times with the same result every time. Migration Assistant running on my laptop with the 'Waiting for mac to connect' box displayed. Mac is connected to wi-fi OK as able to use Safari and access internet. Any ideas, please?

    Thanks for your suggestions. Have managed to get Migration Assistant working but now have a new problem, i.e. where does it save the transferred files?!! Searched a few forums and it seems it saves it under your old username, or suchlike. Anyway I tried logging on as a new user using my old user name but there were only a handful of files there, couldn't locate the majority of stuff from my old laptop. Anyway I don't intend to go through any more hoops with MA - will just save the important stuff to an external drive and transfer it that way. Not impressed with MA at all. I thought it was supposed to be a user-friendly tool to simplify the transfer from pc to Mac - not my experience, I'm afraid!

  • "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."  Trying to format my iomega external HD for use with Mac

    Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
    "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
    (Quitting and reopening Disk Utility does not help.)
    The following also appears in Console log:
    *** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
    Workaround
    Quit Disk Utility.
    From the Finder's Go menu, choose Go to Folder....
    Type the following, then click OK: /Library/Receipts
    Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
    iTunes.pkg
    iTunes4.pkg
    You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
    Open Disk Utility and repair disk permissions again.
    Quit Disk Utility.
    Put the removed iTunes receipts back in /Library/Receipts.
    Note: This issue does not affect Disk Utility's verify or repair disk features.
    All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

    i'm just scared i will do something wrong on my own and lose my data.
    You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
    Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
    When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

  • I was able  to print with my acrobat before, but I can no longer do it.  the error message says "adobe creation cannot continue because acrobat is not activated"  How do I activate it?

    i was able  to print with my acrobat before, but I can no longer do it.  the error message says "adobe creation cannot continue because acrobat is not activated"  How do I activate it?

    I have the exact same issue. I can print one document and then I get the error mentionned above ("adobe creation cannot continue because acrobat is not activated"). Then I need to reboot in order to be able to print a new document.
    I have suite and went to Photoshop as suggested, but this program is already activated. I tried to launch Acrobat Pro but it won't.
    I'm using the Design and Web Premium CS6 Suite on Windows Vista.
    Thank you so much for your help.

  • I have an iPad (original). I cannot complete the update to iOS 5.  It gets to the "backup" stage and then finds an error (-402653081). It asks if I want to continue, with a warning that "continuing will result in the loss of all contents on this iPad."

    I have an iPad (original). I cannot complete the update to iOS 5.  It gets to the "backup" stage and then finds an error (-402653081). It asks if I want to continue, with a warning that "continuing will result in the loss of all contents on this iPad." What can I do?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • "An error has been detected with a required application library and the product cannot continue. Please reinstall the application.

    I have received the following error message from my Adobe Acrobat Pro X1 after installing the CS6 package :, "An error has been detected with a required application library and the product cannot continue. Please reinstall the application.
    I am now unable to open any pdf?
    Any words of advise here how to fix this problem?
    Thanks!

    ** Moved to Acrobat Forums for quicker and accurate resolution steps ***

  • An error has been detected with a required application library and the product cannot continue. Plea

    I am getting the following error each time I open Adobe Acrobat 7.0 Professional...
    "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
    I have tried uninstalling and then reinstalling the program. It didn't help, got the same error shortly after opening the program.
    What is strange is that the problem just suddenly appeared therefore, I believe that it may have been malware related causing this problem. And I have had this program and have been using it without any problems now for over 3 years.
    It appears that a vital part of the program is being blocked.
    Can anyone please help and offer a detailed solution to this problem? Maybe someone has already encountered it.
    Thank you!
    -Dan Sacapano

    Anoop,
    Upon re-reading that information, I am curious as to why your believe that this will solve my issue. That is not related to my error message: "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
    I have not received any such message as the one seen on that page.
    Please explain why I wouldn't have gotten that partcular message and instead got the one I quoted above?
    Thank you,
    -Dan

  • Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network

    I attempted to open Final Cut Express this morning and got the message, "Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network".
    I have no other FCE on any computers...this is the only mac running (iMac 2008 model).  I used a preference manager app and deleted preferences...didn't work.  I uninstalled and reinstalled FCE...didn't work.
    This is the first time I have used FCE since installing the Yosemite OS, so I'm thinking perhaps that has something to do with it.
    Any ideas?

    There have been recent posts appearing about your problem. I'm not sure if anyone has found a solution.
    FCE was abandoned by Apple years ago, and they are currently making Operating Systems without regard to how it impacts FCE.
    countrynewsman wrote:
    I uninstalled and reinstalled FCE...didn't work.
    That is what I would try - a fresh install - but your need to use FCS remover (from the same software source as Preference Manager) to make sure you get all traces of your existing installation off the drive prior to doing the installation:
    http://www.digitalrebellion.com/fcsremover/
    If you use FCS Remover, and reinstall the other problem may be that Apple has apparently removed the Software Upgrade to FCE 4.0.3.
    So unless you have a 4.0.3 install disk, or you hadn't upgraded past the version number of the install disk you do have, you legacy projects may be tagged as being created with a later version than you have and not open.
    Hope it works out for you.
    MtD

  • HT5624 I have reset my password with my computer and I am in the process of updating my iPhone and I am at the enter password window and cannot continue

    I have reset my password with my computer and I am in the process of updating my iPhone and I am at the enter password window and cannot continue.

    The Password reset email sent----follow the directions in the email to reset your password is the message showing on my iPhone. I did not receive the email and reset my password using my computer. iPhone will not allow me to continue and is stuck in the above window. How do I enter my mew password on my iPhone?

  • How do I continue a migration from iPhoto to Photos that was interrupted part way through?

    I began a VERY large migration (40k+ photos) from iPhoto (v9.6.1) to Photos on an external hard drive.  I have a MacBook Pro with Yosemite 10.10.3 that is connected to a network that has a Synology network drive.  The iPhoto library is on that drive and I was wanting to create the Photos library also on the drive.
    The process was very slow and has taken days, but that is expected and it was definitely making progress (I could see the files being added over time). Unfortunately, the transfer was interrupted part way through (my kid closed my laptop, which disconnected it from the network). I tried to start it over with the partially created Photos library folder as the destination, hoping that it would pick up where it left off.  It worked until it reached the same files that were previously created. The migration stopped at that point, and the following error appeared: "Photos was unable to make a copy of your library before preparing it. There were file system or hardware issues…”  I assume the inability to overwrite previous files with the same names was the case of the "file system or hardware issues."
    Is there any way to either continue the migration from where I left off, or maybe even manually move the rest of the files over? Or do I have to wipe out the entire partially migrated Photos library and start over?

    You probably will have to start over
    And I suspect that you are incorrect - as far as I know NO NAS is formatted Mac OS extended - A NAS is basically a Linux computer with no display or keyboard that uses a Linux format drive - a headless computer
    Unless you have a directly connected drive correctly formatted you are cgoing to continue to have issues - your photos and your choice what risk you put them at but you are treading in very dangerous water with you set up - is it documented not to work and similar set ups have been reported here hundreds of times as causing major problems and losing lots of stuff
    LN

Maybe you are looking for