Cannot create a file when that file already exists, but should overwrite

Hi,
I need the same file name which is at Sender side and when it reaches to Receiver directory without timestamp.
for eg., Sender side : Yeswanth.txt
and also receiver side   :  Yeswanth.txt
but, here it should overwrite the existing file (because, the sender side file name is always constant) at receiver directory when the job schedules for each time.
Processing parameters i has given on Receiver side:
File Construction Mode  :  Create
put file  : Use Temporary File
and I enabled the Adapter Specific Message Attributes at Sender side and Receiver side.
Error getting receiver side at communication channel :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
Yeswanth.txt: Cannot create a file when that file already exists.
Reward points for useful answers.
Regards,
Yeswanth.
Edited by: YeswanthRaj Kumar on May 23, 2008 8:20 AM

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

Similar Messages

  • FTPEx: 550  : Cannot create a file when that file already exists.

    Hi experts,
    I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
    In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing  Error message.
    ' Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '172.19.125.190:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
    and this error message is not displayed for all the target files , some files are getting created succesfully.
    After some times , the file in error status , gets created automatically.
    What may be the reason.?
    Thanks in advance .
    Best Regards,
    Anil

    There seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
    Check: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/69d7cfa4b633eae10000000a1553f6/content.htm
    14.      Select the File Construction Mode.
    u25CB       Create
    The file is created. The document received last is saved in each case.
    If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
    You can only set the indicator if you select Use Temporary File under Put File below.
    Regards,
    Abhishek.
    Edited by: abhishek salvi on Jul 28, 2009 6:59 PM

  • Cannot rename DC, "Cannot create a file when that file already exists."

    Hi,
    A long time ago we used a domain controller named jacob.mydomain.lan.  It was removed, possibly in a 'dirty' way, and now we cannot re-use that name for another domain controller.  In the meantime we have upgraded to Win 2012 domain controllers
    now, and when I enter this to rename:
    netdom computername ourdc.mydomain.lan /add:jacob.mydomain.lan
    I get the error:  "Unable to add jacob.mydomain.lan as an alternate name for the computer.  The error is:  Cannot create a file when that file already exists."
    If I enter: 
    netdom computername ourdc.mydomain.lan /remove:jacob.mydomain.lan
    I get: "The command completed successfully", but it still refuses to add jacob.mydomain.lan
    After each attempt to add a forward zone dns record 'jacob.ourdomain.lan' has been created.  I always erase this manually afterwards.
    What is the problem? How can I search to find the offending 'file' named 'jacob'?
    Thanks a lot for help on this.
    regards Tor

    Kevin,
    I suggest you wait 30 days instead of 3 days before you enthusiastically close threads. Some people might think you are being a jerk if you don't.
    "K_evin Zhu" wrote in message
    news:[email protected]...
    Hi,
    As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
    unmark the answer as you wish.
    BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
    Best Regards
    Kevin
    Tomás Mason

  • The cluster service terminated, error 7024, cannot create a file when that file already exists

    I have a test 2-node Failover cluster using Server 2012 R2
    As of last night the cluster service on one of the 2 nodes is down with this error:
    The Cluster Service service terminated with the following service-specific error: 
    Cannot create a file when that file already exists.
    EventID 7024
    The Cluster service waits 60 sec, tries to start, and the same error occurs again. 
    Any idea where to look to identify which file this error is referring to, or how to go about identifying root cause and getting a solution?
    thank you.
    samb

    Hi Yeswanth
    Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
    You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
    Will this be fine.
    Regards
    Ashmi

  • Cannot create a file when that file already exists

    When i try to use Photoshop filters: Adaptive Wide Angle, Shake Reduction and Liquify. An error pop up saying "Cannot create a file when that file already exists".
    Just one detail: The liquify filter doen't pop up the error right away, the error occurs just after i press the "ok" button to accept the changes.
    I have already tryed to Reset the preferences, tryed to reinstall the PS, Update the PS, download (and install) the latests drivers to my pc.
    My Pc fit in all the requirements, have the openGL version: 3.0
    I also have Photoshop CS5 installed, in which the liquify filter works perfectly.
    Here i have two Print Screen, how it looks:
    The first image is just right before a click the "Adaptive Wide Angle"
    The second one is right after i clicked it
    If you could help me, i already thank you for wasting you time reading this!

    Resetting the Photoshop preferences does not reset the preferences for the plugins.
    There should be a Plugins folder. If the folder cannot be created it would cause the error you are seeing.
    Can you check the permissions on the ‘Adobe’ folder at: C:\Users\jworthin\AppData\Roaming\Adobe.
    Can you manually create a Plugins folder in that location or do you get an error?

  • Spotlight/Finder can't find a file, yet when I search the timecapsule for they find it. If I try to restore the file I get "file with that name already exists...." What is wrong?

    I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
    I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
    So if the file is there why can't spotlight/finder find the file??
    If it helps I get this from the terminal when checking if indexing was enabled.
    $ mdutil -s -a
      Indexing enabled.
    /Volumes/Data:
    2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
      No index.
    /Volumes/Time Machine Backups:
      Indexing and searching disabled.
    /Volumes/Time Machine Backups/Backups.backupdb:
      Indexing enabled.

    Hi Danielle,
    Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
    Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
    I hope this is able to help.
    Anna L
    Applications Engineer
    National Instruments

  • Quicktime displaying "A file by that name already exists."

    When I try and play a video on my MacBook Pro off the internet that isnt youtube I get this stupid messsage from quicktimeX (A file by that name already exists.) and then it doesnt play the video.
    Can anybody help me as this is really annoying.

    Hi, not sure if this is the answer to your problem but maybe it will help. I was having this same issue the other day. I was trying to convert some movie files into iPhone format and I kept getting this error right near the end of the conversion. I have done these conversions many times with no trouble but this time it just wouldn't work. I tried everything and it kept happening. Then I got another weird error message. And then I finally realized that the destination disk for the converted files didn't have enough room on it for the file! I guess I just assumed that Quicktime would tell me there wasn't enough room when I tried to start the conversion, not pretend that it was working then crap out when the disk reached its fill level.
    Who knows, maybe the same thing is causing your error. Hope this helps!

  • [svn:fx-trunk] 14009: DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes .

    Revision: 14009
    Revision: 14009
    Author:   [email protected]
    Date:     2010-02-05 12:53:05 -0800 (Fri, 05 Feb 2010)
    Log Message:
    DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes. 
    The element also needs to revalidate if it is resized, whether or not the IR existed before.  This wasn't part of the bug but Hans realized this when he did the code review.
    QE notes:
    Doc notes:
    Bugs: SDK-25354
    Reviewer: Hans
    Tests run: checkintests
    Is noteworthy for integration:
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-25354
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

    Please can u answer it fast

  • Images imported from a digital camera were viewable and editable at first but later disappeared! They cannot be re-imported from either the camera or the iCloud as iPhoto indicates that they already exist, but cannot locate them. Please help!

    On holiday I have been uploading my photos to iphoto on my macbook pro every few days, the latest batch appeared and I was able to edit them, flag, merge events etc. However, later that day when I went back to the images they could not be found in my library. They had been removed from 'latest import', however were viewable on the icloud photo stream. I have attempted to re-import the images from both the digital camera and my photostream but iphoto indicates that the images had already been imported and would not import them again. I was able to locate the master images using finder, but Iphoto tells me that these files are unreadable (they are .jpg) when I try to re-add them this way. I have also tried to 'unhide' all images in case I had accidentally hidden them but this didn't work either.
    Any other suggestions?

    a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card --  I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • HT1347 When I add a folder to the library, does that mean that 'later' when I drop a new file into that folder (already added) it will automatically end up in iTunes? (or do I have to add file/folder to library every time I have a new file??) I'm using XP

    When I add a folder to the library, does that mean that 'later' when I drop a new file into that folder (already added) it will automatically end up in iTunes? (or do I have to add file/folder to library every time I have a new file??) I'm using XP...

    iTunes does not actively scan the media folders.  If you manually add content to a folder, then you must add that content to iTunes manually via the File > Add File/Folder feature.
    The only folder that gets scanned is the "Automatically add to iTunes" folder.

  • Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

    We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
    This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

    Hi Kyle A Wilt,
    I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
    Thank you for your understanding and support.
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • LMS 3.2 - Backup-Error -- ERROR(908): Cannot create or back up tar file

    Hello again,
    with performing backup (LMS 3.2 on Solaris 9) the following errors will arise.
    dbbackup.log
    /opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive Apps file : /opt/CSCOpx/backup/manifest/upm/upminfo/datafiles.txt
    [Tue Dec  8 08:56:54 2009] Archiving the contents of the following directories into /enbw/backup/files/cw_db_backup/0/upm/filebackup.tar
    [Tue Dec  8 08:56:54 2009] /opt/CSCOpx/hum/conf/upm-snmp.properties
    /opt/CSCOpx/hum/thresholdscript /opt/CSCOpx/MDC/tomcat/webapps/upm/reports
    /opt/CSCOpx/MDC/tomcat/webapps/upm/WEB-INF/classes/com/cisco/nm/upm/properti
    es/common/UPM.properties
    /opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive
    /opt/CSCOpx/bin/tar: Cannot add file
    /opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_657_658_-718594975:
    No such file or directory
    /opt/CSCOpx/bin/tar: Cannot add file
    /opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_658_659_1465769167:
    No such file or directory
    /opt/CSCOpx/bin/tar: Error exit delayed from previous errors [Tue Dec  8 09:07:30 2009]  ERROR(908): Cannot create or back up tar file. Backup cancelled. Verify that you have write-access to this directory. [Tue Dec  8 09:07:30 2009]  Backup failed: 2009/12/08 09:07:40 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Is seems to be problem related to maximal filesize handling of GNUtar implemented in CW2000.
    The problem is with tar'ing HUM-Reports in /opt/CSCOpx/MDC/tomcat/webapps/upm/reports, and with reaching
    tarfile-size of 2,9GByte error is thrown.
    </exxx/backup/files/cw_db_backup/0/upm># ls -lh
    total 6126448
    -rw-r-----   1 casuser  casusers    2.9G Dec  8 09:07 filebackup.tar
    </exxx/backup/files/cw_db_backup/0/upm># ls -al
    total 6126452
    drwxr-x---   2 casuser  casusers     512 Dec  7 14:30 .
    drwxr-x---  11 casuser  casusers     512 Dec  7 14:30 ..
    -rw-r-----   1 casuser  casusers 3135201280 Dec  8 09:07 filebackup.tar
    GNUtar-Version
    # /opt/CSCOpx/bin/tar --version
    tar (GNU tar) 1.13
    Copyright (C) 1988, 92,93,94,95,96,97,98, 1999 Free Software Foundation, Inc. This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    Written by John Gilmore and Jay Fenlason.
    Is this a know problem?
    Thanks for any thoughts.
    Best Regards
    Lothar

    Hi Joe,
    thanks for your feedback.
    These files to be tarred aren't there directly after backup stops with error.
    It seems that some process stores data about reports in that file and when trying to
    pack these reports via tar they are delete by any cleanup method.
    Does this help.
    P.S. Backup usually takes about more than 1hour

  • LMS Backup - Cannot create or back up tar file

    Hello,
    We have LMS 3.2 installed and the backup is failing with the following message
    "Cannot create or back up tar file. Backup cancelled. Verify that you have write-access to this directory."
    I have removed Cygwin and also the set the backup to offline yet the same result. Please assist on this issue.
    Thanks.

    Hi Dedra,
    I will not give you as much help as Joseph, but will provide you an idea for possible problem explanation.
    Just following your sentence:
    I removed all traces of mentioned line but still the same problem.  Backup failed with the following message. I have noticed that all these  backup fail after writing 4GB of data into the backup directory.
    Are you sure you don't generate any file bigger than 4GB on a FAT32 file system support, which cannot be possible (external USB storage) ?
    It could be the reason for such a error message returned from your tar.exe process....
    D:/CiscoWorks_Backup/0/upm/filebackup.tarC:\PROGRA~1\CSCOpx\bin\tar.exe:  Write error: No space left on device would be the error message returned code from this situation oversizing file maximum size.
    Any simple solution would be to format your USB storage to NTFS or change backup destination to NTFS partition somewhere else for test and eliminate this supposition.
    regard,
    andré

  • Recently installed OSX 10.8.2 and found that there was NO ~/Library and when I tried to create one I was told that it already exists.

    Recently installed OSX 10.8.2 and found that there was NO ~/Library and when I tried to create one I was told that it already exists.
    Does anyone know why ?

    It's hidden. Choose Go to Folder from the Finder's Go menu and supply that path to access it.
    (71284)

  • "File ... already exists, but it is inconsistent with this one." error

    I've previously used ALPC to profile a Zuiko 12-60 on a E520 and I had no trouble at all. I had 33 different sets of 9 pictures each, and they all merged nicely into one consistent profile. The profile worked perfectly and corrected lens distortion better than any other software I've used. Now I'm trying to profile my Nikkor 10-24 on a Nikon D7000, but as soon as I try to append the 2nd set to the 1st one (same focal length and focus distance, different aperture), I get this message: "File <filename> already exists, but it is inconsistent with this one. Please select a different location or use a different file name.".
    My brother has been having this same issue and he's also using a Nikon D7000, but with a Sigma 17-70 2.8-4.0. Any ideas why this is happening? Some sort of D7000 raw conversion issue, maybe? I used ACR to convert NEF to DNG. The first profile is created and works well, though apparently not very accurate.
    I tested the one profile that is saved, at 10mm and f/3.5, and it's not very good. Distortion is clearly over-corrected. The one difference between the profile I did for the Olympus and this one is that I refocused after every shot for this one (since the wide angle really throws corner focus off when you reframe it). Could this be it? If not, what else?
    I'm using an A4 13x21 chart. It's enough to fill the frame with 9 shots at minimum focus distance.

    I am having the same problem with my d7000.  This happens regardless of software used to convert NEF files, so if I had to guess at why this is happening I would say that the d7000 maybe has a different format for its makernotes, which is where the lens information is stored, and the lens profile creator doesn't read it.
    Here's what happened when I tried to profile my 50mm f1.8 nikkor: I took 9 pictures at f1.8 and nine at f2.8. The profiling worked fine on both. So I ran it first on the f1.8 set, and saved it. Did the same for the f2.8 set and tried to save it, but it wouldn't allow me to append the file to the existing one, giving me the "inconsistent" error discussed here. I then save the second profile separately.
    I opened both on windows notepad, and this is the lensID inconsistency already discussed here:
    The profile I did with the f1.8 set had this line in it:
    <stCamera:LensID>76</stCamera:LensID>
    And the profile I did with the f2.8 set had this line:
    <stCamera:LensID>179</stCamera:LensID>

Maybe you are looking for