Cannot Create a new depreciation area

Hello.
I´m having some trouble creating a new Dep Area. At first when I tryed to create a copy from one on the list (Number 15) it showed me an error that said something like: "Transaction tipe 335 does not exists" (later on I´ve figured out that I also needed to create a trans. type Nº337)
The thing is that i must have created them BOTH wrong beacause then i started to guet this error(s):
http://img195.imageshack.us/img195/5691/errorfug.jpg
Can any of you please help me? How do I fix this thing? How do I define correctly the parameters of these tx. types??
Your help will be MOST apreciated. Thanks.
PS: I´m sorry about the grammar, I´m kinda rusty with my english skills.
Edited by: Zeque.- on May 21, 2009 8:22 PM
Edited by: Zeque.- on May 21, 2009 8:23 PM

Yes I have created tx 335. It´s not working yet. I believe I have mess up with the settings.
Can you please showme how to set it right?
Here is the error i get:
Transfer variant 9 02 30: Method 1 acquis. TTY is not allowed
Message no. AC638
Diagnosis
Transfer method 1 is specified for depreciation area 30. A retirement transaction type is assigned for retirements, and therefore an acquisition transaction type must be assigned for acquisitions that allows manual entry of proportional values.
Procedure
Check the assigned transaction type.

Similar Messages

  • Value in new depreciation area is Zero

    Hello All,
    I have created a new depreciation area 11. In OABC it is set as 01 (values from book depreciation). In OAYZ, I have assigned the new depreciation area to new asset classes. Then I transferred to value from old assets to new assets by ABUMN and run AFBN for opening the new depreciation area.
    In AW01N, I can see the new depreciation area for the asset but with zero value. In the transactions I see the transfer with transaction type 158 and with zero value for the new area. The transaction type taken for book depreciation is 310 and has the correct value. But earlier when I did the testing in quality the transaction type was 310 for both the areas.
    In AFBN, the check box Leave initial value was unchecked initially and when I ran it again I result was processed 0 and error 0. I reversed one asset and transferred to new asset class containing both depreciation area again. But again the value in depreciation area 11 is Nil.
    Please help.
    Thanks,
    Sangram

    Hi Sangram
    Since you are already executed AFBN with the option "Leave initial values", you cannot update the records now, as the table entries have already would have got created in tables ANLB,ANLC, etc.
    Now if you want to copy values from other depreicaiton areas to new dep area, one option is to copy a ZZZAFANEW1 by doing a small modification (that is by changing all ABAP commands INSERT to UPDATE) and execute this program.  This will update the values from the source depreciation area to target depreciation area, even if table record already exists.
    This code is available in SAP note no.317806
    Test it thoroughly before using it in Production client.  Also take care to enter a correct source and target depreciation area to avoid further problems.
    Hope this helps.
    Regards

  • New Depreciation Area after go-live

    Hi Gurus
    We are on ECC 6.0 in a production environment having gone live in April 2008.
    We had gone live with only Depreciation Area 01. Other depreciation areas were de-activated. We have a requirement now to create a new depreciation area 15 for Income Tax Depreciation. We have activated the Dep Area 15 & did the necessary configuration including activation of group assets. We have run the program AFBN for creating new Dep Area. We have created a couple of assets which are also working fine.
    However, when we try to update the depreciation values for assets (using AS92) which are already gone live from April 2008, we encounter a problem. We cannot change the depreciation key for Dep Area 15. Also, the group asset field is deactivated for gone live assets. But it works fine for assets created afresh.
    Please help.
    Regards

    Hi,
    You have to select specific asset classes for group assets via the config.
    and you can set default dep keys at asset class level. via config. (maintain dep keys for dep area 15)
    Please check and revert back.
    Thanks,
    Srinu

  • FI-AA new depreciation area - treatment depreciation previous years

    Hi,
    In the FI-AA module , next to the already existing depreciation area 01 for Fiscal reporting with full integration of postings to FI-GL, I have created a new depreciation area 20 for te purpose of Management reporting which takes over its APC values from depreciation area 01 and does only post different Depreciation values to FI-GL.
    Subsequently I updated the data for the new depreciation area in teh already existing asset master data records ( different depreciation keys).
    The depreciation calculation and resulting postings for the current year are correct.
    However I wonder what will happen with the data for the previous years;
    when i look in the asset explorer i do see for the new depr area in the "posted values" tab that it reports for the previous years planned depreciation amounts . However we do not want to post these amounts in the previous years because these years have already been closed and audited.
    Will we be able at the end of this fiscal year to changeover FI-AA to the new fiscalyear ( transactions AJAB, AJRW) without the system complaining with error messages that we first need to also perform the depreciation postings for all the previous years in this new depreciation area ?
    Many thanks in advance for your much appreciated help.
    Kind Regards,
    Arjan

    Can you please tell me how you added the new depreciaton area to the existing asset masters in those classes ?  To get the new depreciation area to show up?  We just did the same thing and we're only working with assets that were acquired this year - but we can't get the new depreciation area added to the assets that already existed in those classes.  If you figured out how to do that it would sure help us out.  I look forward to your response.  We're in 4.7.
    Thanks
    Karla
    Never mind found it from reading other posts.  I used AFBN and it worked.  Thanks
    Edited by: Karla Trevithick on Sep 17, 2009 12:39 AM

  • Value of asset in new depreciation area is Zero

    Hello All
    I have created a new depreciation area 11. In OABC it is set as 01 (values from book depreciation). In OAYZ, I have assigned the new depreciation area to new asset classes. Then I transferred to value from old assets to new assets by ABUMN and run  AFBN for opening the new depreciation area.
    In AW01N, I can see the new depreciation area for the asset but with zero value. In the transactions I see the transfer with transaction type 158 and with zero value for the new area. The transaction type taken for book depreciation is 310 and has the correct value.
    Can anyone tell me how to get the net book value in area 11.
    Thanks,
    Sangram

    Dear Sangram
    To ad a depreciation areas you have to proceed as follows. Point 3 explains how to get how to get the net book value in
    area 11.                                                                               
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program     
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.              
                 Do not set this indicator if you want the system           
                 to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.                  
                 Set this indicator if you want to open the newly created   
                 depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    Regards Bernhard

  • URGENT: I CAN'T SEE DEPRECIATION VALUES IN NEW DEPRECIATION AREA

    HELLO: I HAVE CREATED A NEW DEPRECIATION AREA THAT IS SIMILAR TO AREA 01. WHEN I SEE THE REPORT OF ASSET EXPLORER I WATCH VALUES IN SECCTION "DEPRECIATION POSTED/PLANNED" BUT THERE IS NOT VALUES IN THE NEW DEPRECIATION AREA. COULD YOU POSSIBLE HELP ME?
    BEST REGARDS,
    ALFREDO DEL PORTILLO

    try tcode AFAR
    A.

  • Adding new depreciation area to assets

    Hi,
    1.I created a new depreciation area 13( tax depreciation) . When I am executing the transaction AFBN for adding this depreciation area to all the assets, first I am getting the error message
    +/- sign rule for the new depreciation area is too restrictive
    Message no. AU 113 " and
    " Closed fiscal years for areas 01 and 13 differ by more than 1 years ".
    2. I am in 4.6C and in OAAR, for depreciation area 13 the closed fiscal year is 2002 and for all others 2007.
    3. The OSS note 421549 is already implemented.
    Any help for resolving this is highly appreciated.
    thanks
    Srinivasa Vepa

    Hii
    as u said the message says that the closed fiscal year for dep.area 01 and 13 is more than one year.
    and u also state that the fiscal year close for dep area 13 is 2002 and for all others is 2007.
    so first step u need to do is to close the fiscal year for dep. area 13 till 2006.
    here the functionality of AA works like it allows only 2 fiscal year to be open at the same time.. so as the dep. area 13 is open since 2003 it will give u an error..
    so please try to close all this and i m sure it will solve ur query......
    thanks
    sejal

  • What are the prerequisites  to create New Depreciation areas

    Hi SAP experts,
    I would like to know what are the prerequisites to create new depreciation areas and what is the configuration for this in details.
    Thanks & Regards
    Mouly

    Hi Mouly,
    The pre- requisite for creation of depreciation area are
    - Reporting of depreciation as per different laws i.e in india, we need to report depn as per Ind accounting standards, as per income tax act, etc
    - Whether we are using parallel currency or not for that company code.
    Regards
    Vivek

  • Auto patch error usdsop cannot create a new process

    Hi i am applying hrms family pack k in one vision db in testnode but i am getting following error.Any idea
    appsversion 11.5.10 and windows 2003 advanced server
    Generating product JAR files in JAVA_TOP -
    j:\oracle\viscomn\java with command:
    adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @j:\oracle\visappl\admin\VIS\out\genjars.cmd
    Error:
    usdsop cannot create a new process
    Cause: usdsop encountered an error creating a new process. [Reason].
    Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more resou (RE
    Failed to generate product JAR files in JAVA_TOP -
    j:\oracle\viscomn\java.
    adogjf() Unable to generate jar files under JAVA_TOP
    AutoPatch error:
    Failed to generate the product JAR files
    rgds
    rajesh

    This is the primary reason I dislike doing Oracle Apps on Windows.
    If something bad happens while patching, and you find yourself without critical ad executables because relink failed, you need to run relinkenv.cmd to (re)create the APPS.SH unix-style environment (forward slashes) for relink.sh.
    Source or double click on envshell.cmd
    sh adrelink.sh force=y "ad adjava.exe"
    Backup Mode is "file"
    Removing Application products' bin directories from PATH ...
    Done removing Application products' bin directories from PATH
    Removing $FND_TOP/$APPLBIN from PATH ...
    sed: number in \[0-9] invalid
    Done removing $FND_TOP/$APPLBIN from PATH
    awk: adrelink.sh 4107: not found
    grep: adrelink.sh 4107: not found
    grep: adrelink.sh 4107: not found
    echo: adrelink.sh 4107: writing: The pipe is being closed.
    awk: adrelink.sh 4107: not found
    ORACLE RDBMS Version 8.0.6.0.0
    Oracle Reports Version 6.0
    Oracle Applications Release
    Unable to determine the release number.
    To resolve:
    type relinkenv.cmd
    This creates APPS.SH.
    Source or double click on envshell.cmd to create a new session.
    Now type sh
    At the command prompt, type . ./APPS.Sh
    now adrelink.sh force=y "ad adjava.exe"
    You are running adrelink, version 115.85
    Start of adrelink session
    Date/time is Fri Jul 20 20:22:35 PDT 2007
    Log file is d:/oracle/visappl/admin/log/adrelink.log
    Command line arguments are
    "force=y" "ad adjava.exe"
    Done with link of ad executable 'adjava.exe' on Fri Jul 20 20:27:07 PDT 2007
    Done relinking module adjava.exe in product ad
    Done with link of product 'ad' on Fri Jul 20 20:27:07 PDT 2007
    adrelink is exiting with status 0
    End of adrelink session

  • New Depreciation Area - AFBN

    Dear Experts,
    My user has given a new scenario where we have to calculate tax depreciation for assets transferred from US books to SG books. When the transfers were executed, the tax depreciation area was not set up in the SG books' Chart of Depreciation. We do have other company codes assigned to the same chart of depreciation. For these other company codes, tax depreciation calculation is not required. In addition, the transferred assets and the assets in the other company codes share the same asset classes. The requirement is that we want to calculate the tax depreciation in the SG book only but not the other company codes.
    Initially, we are looking at setting up the tax depreciation area in the SG book and activate the depreciation area via AFBN (program RAFABNEW). This will activate the tax depreciation area for all existing assets under the chart of depreciation/asset class assignment. However, we found out that we could not deactivate the depreciation area in the existing assets in the other company codes. This is regardless of whether we activate the field XAFBE (deactivate depreciation area) in the depreciation area layout. Seems that this only works with new assets.
    Would like to seek your advice on the options available other than creating new asset classes for these transferred assets.
    Is it possible to enhance the program RAFABNEW to include company code and asset classes?
    Thank you.

    This is another option that I used on that scenario, but it is up to you if you want to follow the same approach. We created a custom program that will put a temporary deactivation date on the assets the we do not want to extend the new book. Basically this is direct update on field ANLA-DEACTIV.
    Then we run AFBN, since the assets are deactivated, new depreciation area will not be created on these assets, but only on those assets that are active.
    Then you can set the deactivation date again back to "Blank" after you run AFBN.
    Thanks!
    Jhero

  • New Depreciation Area in Asset Master Data, for assets under construction.

    Hi,
      The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS.  We had followed three steps
    1. Create Depreciation area via OADB.
    2. Activate Depreciation area via OAYZ.
    3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
    3.1 u2013 Indicator: Leave values initial = ticked.  Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
    In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
    Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
    In Assets Class of AUC we had used  Investmnet Measure as Status of AUC.  
    Kindly provide solution for the same.
    Nikhil

    Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
    5     Investment measure settlement
    Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
    4     Gross method with transfer of values to dependent areas
    This should help.

  • How to update the New Depreciation Area in Asset Master Data

    Hi,
    Please guide me
    How to update the New Depreciation Area in the Asset Master Data.
    Regards
    Srinivas

    Hi,
    a) The procedure is as follows:
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program  
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.           
               Do not set this indicator if you want the system        
               to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.               
               Set this indicator if you want to open the newly created
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    b) Helpful notes:
    430618 (Procedure for setting up new depreciation area)                           
    301113 (Restrictions of RAFABNEW)                                                 
    421549  (RAFABNEW: Error with closed fiscal years)
    c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
    regards Bernhard

  • Getting Error Msg  "usdsop cannot create a new process" in Log File

    Hi All,
    I have installed r12 in my personal LapTop.
    Every thing looks fine..
    For testing purpose, I have created a Shell Script and registered concurrent program.
    While i am running this program, program is getting error out with below message.
    D:\oracle\VIS\apps\apps_st\appl\po\12.0.0\bin\TEST_CONVERT.exe
    usdsop cannot create a new process
    Cause: usdsop encountered an error creating a new process. [Reason].
    Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more resou (RE
    Executing request completion options...
    Please help me in resolving this issue.
    Thanks
    Sandeep

    What is your OS?
    Did you complete the steps in these docs?
    How to Register a Host Concurrent Program in Applications [ID 156636.1]
    How To Create A Custom Concurrent Program With Host Method and Pass Parameters To The Shell Script [ID 266268.1]
    How Do You Run A Unix Host Script From Concurrent Managers On MS Windows Platform? [ID 412392.1]
    How To Setup A Custom Concurrent Host Program [ID 147455.1]
    Thanks,
    Hussein

  • Error : usdsop cannot create a new process

    Hi DBA's,
    I am applying ADI.6 patch 6502082. It was error out with the follwing error message. Kindly check and give me your valuable solution.
    ** Backing up $JAVATOP/META-INF/JRIMETA.DAT...
    Copying JRIMETA.DAT to JRIMETA.DAT.BackedupByAdpatch ...
    Copied JRIMETA.DAT to JRIMETA.DAT.BackedupByAdpatch.
    ** Successfully backed up JRIMETA.DAT.
    STRT_TASK: [Run adjcopy.class] [] [Wed Dec 24 2008 14:24:09]
    Running adjcopy.class:
    adjava -mx512m -nojit oracle.apps.ad.jri.adjcopy @f:\MIGR\migrappl\admin\MIV\out\apps.cmd
    Error:
    usdsop cannot create a new process
    Cause: usdsop encountered an error creating a new process. [Reason].
    Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more resou (RE
    Thanks.

    Hi Ronald,
    please check the bellow one
    C:\Documents and Settings\oracle>which sed
    E:\UTIL\MKS\mksnt/sed.exe
    C:\Documents and Settings\oracle>which cl.exe
    E:\util\VC98\bin/cl.exe
    C:\Documents and Settings\oracle>which %PATH%
    which: Files\Dell\SysMgt\oma\bin;E:\util\VC98\Tools\WinNT;E:\util\VC98\MSDev98\Bin;E:\util\VC98\Tools;E:\util\VC98\bin;E:\apps\U
    \uatora\8.0.6\bin;C:\Perl\site\bin;C:\Perl\bin;E:\UTIL\MKS\bin;E:\UTIL\MKS\bin\x11;E:\UTIL\MKS\mksnt;C:\WINDOWS\system32;C:\WIND
    S;C:\WINDOWS\System32\Wbem;C:\Program: name too long
    C:\Documents and Settings\oracle>
    Thanks

  • New Depreciation Area tobe added to the existing Assets

    Hi,
    I had Run OAYZ to activate a depreciation area for a Asset Class
    I run AFBN to add this new depreciation area to the existing assets.
    When I go to Assets Explorer (AW01N) I get following area
    Values for Ordinary deprec. have changed in dep. area 13 in fiscal year 2007
        Message no. AU390
    Diagnosis
        Depreciation terms were changed in depreciation area 13 since the last
        time depreciation was recalculated. The values for Ordinary deprec. that
        were saved in the database in fiscal year 2007 are therefore different
        from the newly calculated values by an amount of
        476.41-.
    Procedure
        Check if the newly calculated values are correct. If they are, then
        carry out a depreciation recalculation. You should be aware that if you
        recalculate depreciation, new values could arise for all open fiscal
        years, and these would then have to be posted to the general ledger by
    means of a depreciation posting run.
    If, on the other hand, you want to keep the values that are saved in the
    database, you have to set the depreciation terms back to how they were
    at the time of the last depreciation recalculation.
    To see a comparison of the old and new values, you can use the Display
    dep. calc. function in the asset value display or the Recalculate values
    function in the Asset Accounting menu.
    Proceed
    Now if I try to click on proceed and recalculate the depreciation (AFAR) the system gives error
    40001        0    WRK SURF FOR RDQ WRKPROJCT RMS-RSCH DATA OP.   2007 Error
    in dep. calculation
        Message no. BL001
    Pl. guide me for the same.
    REgards,
    Sanjay Soni
    [email protected]

    Hi Sanjay,
    Execute T Code AFBN and add the new depreciation areas to the existing assets. This will add the new dep area to all the assets under the particular char of depreciation.
    regards
    Sridhar

Maybe you are looking for