Cannot create a new monitor profile
Just got new 27" imac.
Everytime I try to calibrate monitor I get,
error, could not create new profile.
Is this some issue? thanks.
make a back up if you dont already have one, read those carefully and go down the list. the second option should sort it, and what profiles are you talking about? connectivity or user profile for phone, text, email stuff?
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
Message Edited by radical24 on 27-Aug-2009 09:59 AM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....
Similar Messages
-
Creating a new monitor profile
Does anyone know how to Create a new monitor profile...Running Windows 7 with Elemnts 9 and I cant find a Adobe Gamma Wizard on my PC.
Adobe Gamma has been long discontinued, because it was never meant to work with anything but the old fashioned CRT monitors (the ones like tube television sets).
You may have some kind of utility in your video driver, which is better than nothing, but the best way to calibrate a monitor is with a hardware device. They're not nearly as expensive as they used to be--check out the Huey or the colormunki, for example. -
I'm using a big screen iMac at work to connect to my Mac Pro at home (With a smaller monitor). Can I create a new monitor profile closer to the iMac's monitor size?
Adobe Gamma has been long discontinued, because it was never meant to work with anything but the old fashioned CRT monitors (the ones like tube television sets).
You may have some kind of utility in your video driver, which is better than nothing, but the best way to calibrate a monitor is with a hardware device. They're not nearly as expensive as they used to be--check out the Huey or the colormunki, for example. -
Create A New Monitoring Profile In Grid Control
Hi All,
We need to set up a monitoring user in grid control to monitor only a few limited metrics i.e FRA area filled , Shared Pool usage, Archiver hung,cpu usage & memory usage..
This account would be provided to a monitoring team to view only these metrics and of course wont have rights to modify anything in the database so only read only access...
I managed to create a read only account from Setup----Administrators---Create...
So doing the above i have created the read only user from the appropriate options, now my only question is that i do not want to give read only access for any other metrics apart from the ones i mentioned above..
Is it possible to set only the above five metrics.
Thanks...Hi;
For your issue i suggest close your thread here as changing thread status to answered and move your issue to Forum Home » Enterprise Manager » Enterprise Manager Grid Control
Regard
Helios -
I have tried restarting my computer, tried uninstalling, tried reinstalling but it always tells me that Firefox is open and running. When I select the task manager, there is no "firefox" under process. I have tried checking to make sure that the "read only" box is not checked under the profile properties. it seems like my only option now is to create a new profile. However, the profile manager won't even come up because it says firefox is running in the background. So frustrating!
Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
You can force Firefox to create a new default profile if you remove the profiles.ini file.
* http://kb.mozillazine.org/profiles.ini_file
You can find that file here:
C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\
The "Application Data" folder in XP/Win2K and the "AppData" folder in Vista/Windows 7 are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Cannot create a new login in portal
Dear Experts,
After the installation of portal, i was not able to login with j2ee_admin, i logged in with administrator, But i cannot create a new user as shown in the below screen.Dear Divayanshu,
From the said note everything is correct.
trace:
trc file: "dev_server0", trc level: 1, release: "720"
sysno 03
sid JDT
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\AWQAFIDES-HQ\sapmnt\JDT\SYS\profile\JDT_J03_AWQAFIDES-HQ
pid 3288
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Wed Aug 13 10:49:04 2014
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : E:\usr\sap\JDT\J03\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\AWQAFIDES-HQ\sapmnt\JDT\SYS\profile\JDT_J03_AWQAFIDES-HQ
arg[ 4] : -DSAPINFO=JDT_03_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID31923250
arg[ 7] : -file=E:\usr\sap\JDT\J03\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=E:\usr\sap\JDT\J03\work\jstart.jvm
arg[ 9] : -traceFile=E:\usr\sap\JDT\J03\work\dev_server0
arg[10] : -javaOutFile=E:\usr\sap\JDT\J03\work\jvm_server0.out
F
F Wed Aug 13 10:49:04 2014
F ********************************************************************************
F Java environment properties
F root directory : E:\usr\sap\JDT\J03\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : E:\usr\sap\JDT\J03\exe\sapjvm_6\jre\bin\server;E:\usr\sap\JDT\J03\exe\sapjvm_6\jre\bin
F executable path : E:\usr\sap\JDT\J03\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 464] MtxInit: 10002 0 2
I [Thr 464] MPI: dynamic quotas disabled.
I [Thr 464] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 464] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 464] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 464] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 464] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 464] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Wed Aug 13 10:49:04 2014
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:03
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=03
F arg[10] = -DSAPSYSTEMNAME=JDT
F arg[11] = -DSAPMYNAME=AWQAFIDES-HQ_JDT_03
F arg[12] = -DSAPDBHOST=AWQAFIDES-HQ
F arg[13] = -DSAPINFO=JDT_03_server0
F arg[14] = -Dj2ee.dbhost=AWQAFIDES-HQ
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=3288
F arg[20] = -Djstartup.ownHardwareId=U1400945072
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50321-50321
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=E:\usr\sap\JDT\SYS\global
F arg[26] = -Dapplication.home=E:\usr\sap\JDT\J03\exe
F arg[27] = -Djava.class.path=E:\usr\sap\JDT\J03\exe\jstart71.jar;E:\usr\sap\JDT\J03\exe\sapjvm_6\lib\jvmx.jar;E:\usr\sap\JDT\J03\exe\sapjvm_6\lib\jvmx_tools.jar;E:\usr\sap\JDT\J03\exe\jre\lib\iqlib.jar;E:\usr\sap\JDT\J03\exe\sapjvm_6\lib\tools.jar;E:\usr\sap\JDT\J03\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;E:\usr\sap\JDT\J03\j2ee\cluster\bin\boot\jaas.jar;E:\usr\sap\JDT\J03\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;E:\usr\sap\JDT\J03\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=E:\usr\sap\JDT\J03\exe\sapjvm_6\jre\bin\server;E:\usr\sap\JDT\J03\exe\sapjvm_6\jre\bin;E:\usr\sap\JDT\J03\j2ee\os_libs;E:\usr\sap\JDT\J03\exe\sapjvm_6\bin;E:\usr\sap\JDT\J03\exe;C:\Program Files\EMC NetWorker\nsr\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn;C:\Program Files\Microsoft SQL Server\100\Tools\Binn;C:\Program Files\Microsoft SQL Server\100\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn;E:\usr\sap\JDT\SYS\exe\uc\NTAMD64
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=E:\usr\sap\JDT\J03\exe\mssjdbc\jdbc4\sqljdbc4.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -XX:+UseConcMarkSweepGC
F arg[51] = -XX:TargetSurvivorRatio=90
F arg[52] = -verbose:gc
F arg[53] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[54] = -XX:+PrintGCDetails
F arg[55] = -XX:MaxErrorQueueLength=200
F arg[56] = -XX:+PrintGCTimeStamps
F arg[57] = -XX:+DisableExplicitGC
F arg[58] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[59] = -XX:-StringInternTableInPermGen
F arg[60] = -XX:SurvivorRatio=9
F arg[61] = -XX:+HeapDumpOnOutOfMemoryError
F arg[62] = -XX:HeapDumpPath=OOM.hprof
F arg[63] = -XX:-TraceClassUnloading
F arg[64] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J (CompilerOracle read from file E:\usr\sap\JDT\J03\exe\sapjvm_6\jre\.hotspot_compiler )
F
F [Thr 4704] Wed Aug 13 10:49:05 2014
F [Thr 4704] *** LOG => SfCJavaVm: Java VM started.
F ********************************************************************************
F Main method call:
F com/sap/engine/boot/Start.main()
F ********************************************************************************
J
J Wed Aug 13 10:49:10 2014
J 5.858: [GC 5.858: [ParNew: 343552K->6707K(381696K), 0.0110668 secs] 343559K->6715K(2059008K), 0.0112063 secs] [Times: user=0.05 sys=0.01, real=0.01 secs]
F
F [Thr 4704] Wed Aug 13 10:49:11 2014
F [Thr 4704] *** LOG => State changed from 0 (Initial) to 1 (Waiting to start).
F [Thr 4704] *** LOG state real time: 7.229 CPU time: 0.842 sys, 4.430 usr
F [Thr 4704] *** LOG total real time: 7.229 CPU time: 0.842 sys, 4.430 usr
F [Thr 4704]
F [Thr 4704] *** LOG => State changed from 1 (Waiting to start) to 2 (Starting framework).
F [Thr 4704] *** LOG state real time: 0.000 CPU time: 0.000 sys, 0.000 usr
F [Thr 4704] *** LOG total real time: 7.229 CPU time: 0.842 sys, 4.430 usr
F [Thr 4704]
J
J Wed Aug 13 10:49:13 2014
J 9.118: [GC 9.119: [ParNewJ
J Wed Aug 13 10:49:14 2014
: 350259K->16694K(381696K), 0.0233455 secs] 350316K->16751K(2059008K), 0.0235734 secs] [Times: user=0.08 sys=0.00, real=0.02 secs]
J
J Wed Aug 13 10:49:25 2014
J 20.298: [GC 20.298: [ParNew: 360246K->38144K(381696K), 0.1170405 secs] 360668K->62918K(2059008K), 0.1172377 secs] [Times: user=0.39 sys=0.06, real=0.12 secs]
J
J Wed Aug 13 10:49:26 2014
J 21.932: [GC 21.932: [ParNew: 381696K->38144K(381696K), 0.1226817 secs] 407159K->90160K(2059008K), 0.1228570 secs] [Times: user=0.34 sys=0.03, real=0.12 secs]
J
J Wed Aug 13 10:49:28 2014
J 23.292: [GC 23.292: [ParNew: 381696K->38144K(381696K), 0.1285038 secs] 434349K->120556K(2059008K), 0.1286495 secs] [Times: user=0.39 sys=0.05, real=0.13 secs]
J
J Wed Aug 13 10:49:36 2014
J 31.762: [GC 31.762: [ParNew: 381696K->38144K(381696K), 0.1689539 secs] 464356K->161386K(2059008K), 0.1691127 secs] [Times: user=0.42 sys=0.00, real=0.17 secs]
J
J Wed Aug 13 10:49:40 2014
J 35.868: [GC 35.868: [ParNew: 381696K->38144K(381696K), 0.1632272 secs] 508528K->205662K(2059008K), 0.1634124 secs] [Times: user=0.53 sys=0.01, real=0.16 secs]
M
M [Thr 3484] Wed Aug 13 10:49:42 2014
M [Thr 3484] CCMS: openMonitoringSegment(): inside static JMON Lib: already connected.
J
J Wed Aug 13 10:49:42 2014
J 37.824: [GC 37.824: [ParNew: 381696K->38144K(381696K), 0.1195535 secs] 556408K->240492K(2059008K), 0.1197142 secs] [Times: user=0.34 sys=0.02, real=0.12 secs]
J
J Wed Aug 13 10:49:44 2014
J 39.791: [GC 39.791: [ParNew: 381696K->38144K(381696K), 0.1104638 secs] 584213K->264018K(2059008K), 0.1106449 secs] [Times: user=0.30 sys=0.05, real=0.11 secs]
J
J Wed Aug 13 10:49:46 2014
J 41.241: [GC 41.241: [ParNew: 381696K->38144K(381696K), 0.0858888 secs] 607728K->279353K(2059008K), 0.0860546 secs] [Times: user=0.22 sys=0.00, real=0.09 secs]
J
J Wed Aug 13 10:49:47 2014
J 42.977: [GC 42.977: [ParNewJ
J Wed Aug 13 10:49:48 2014
: 381696K->38144K(381696K), 0.0981324 secs] 622984K->301177K(2059008K), 0.0982954 secs] [Times: user=0.25 sys=0.05, real=0.10 secs]
J
J Wed Aug 13 10:49:51 2014
J 46.854: [GC 46.854: [ParNewJ
J Wed Aug 13 10:49:52 2014
: 381696K->38144K(381696K), 0.1648782 secs] 644786K->339134K(2059008K), 0.1650896 secs] [Times: user=0.42 sys=0.03, real=0.17 secs]
J
J Wed Aug 13 10:49:55 2014
J 50.798: [GC 50.798: [ParNew: 381696K->38144K(381696K), 0.0997711 secs] 682851K->358369K(2059008K), 0.0999877 secs] [Times: user=0.33 sys=0.00, real=0.10 secs]
F
F [Thr 4704] Wed Aug 13 10:49:57 2014
F [Thr 4704] *** LOG => State changed from 2 (Starting framework) to 10 (Starting apps).
F [Thr 4704] *** LOG state real time: 46.538 CPU time: 6.302 sys, 79.810 usr
F [Thr 4704] *** LOG total real time: 53.768 CPU time: 7.144 sys, 84.240 usr
F [Thr 4704]
J
J Wed Aug 13 10:49:58 2014
J 53.859: [GC 53.859: [ParNew: 381675K->27304K(381696K), 0.0820436 secs] 702190K->368321K(2059008K), 0.0822255 secs] [Times: user=0.22 sys=0.03, real=0.08 secs]
J
J Wed Aug 13 10:49:59 2014
J 54.593: [GC 54.593: [ParNew: 370796K->30046K(381696K), 0.0356657 secs] 711861K->371111K(2059008K), 0.0358375 secs] [Times: user=0.14 sys=0.00, real=0.04 secs]
J
J Wed Aug 13 10:50:00 2014
J 55.192: [GC 55.193: [ParNew: 373594K->30730K(381696K), 0.0258616 secs] 714658K->371794K(2059008K), 0.0260706 secs] [Times: user=0.08 sys=0.00, real=0.03 secs]
J 55.823: [GC 55.823: [ParNew: 374272K->33802K(381696K), 0.0299796 secs] 715337K->374867K(2059008K), 0.0301532 secs] [Times: user=0.11 sys=0.00, real=0.03 secs]
J
J Wed Aug 13 10:50:01 2014
J 56.442: [GC 56.442: [ParNew: 377335K->38144K(381696K), 0.0404834 secs] 718399K->384198K(2059008K), 0.0406513 secs] [Times: user=0.14 sys=0.00, real=0.04 secs]
J 56.760: [GC 56.760: [ParNew: 381679K->31747K(381696K), 0.0536330 secs] 727734K->393582K(2059008K), 0.0538047 secs] [Times: user=0.19 sys=0.02, real=0.05 secs]
J 56.960: [GC 56.960: [ParNewJ
J Wed Aug 13 10:50:02 2014
: 375299K->32769K(381696K), 0.0215789 secs] 737134K->394604K(2059008K), 0.0217479 secs] [Times: user=0.08 sys=0.00, real=0.02 secs]
J 57.116: [GC 57.116: [ParNew: 376282K->35165K(381696K), 0.0226774 secs] 738117K->397000K(2059008K), 0.0228445 secs] [Times: user=0.12 sys=0.00, real=0.02 secs]
J 57.298: [GC 57.298: [ParNew: 378667K->25542K(381696K), 0.0176353 secs] 740502K->387377K(2059008K), 0.0178030 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
J 57.952: [GC 57.952: [ParNewJ
J Wed Aug 13 10:50:03 2014
: 369055K->25609K(381696K), 0.0200687 secs] 730890K->387444K(2059008K), 0.0202358 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
J 58.556: [GC 58.556: [ParNew: 369161K->29706K(381696K), 0.0219467 secs] 731184K->391729K(2059008K), 0.0221159 secs] [Times: user=0.13 sys=0.00, real=0.02 secs]
J
J Wed Aug 13 10:50:04 2014
J 59.099: [GC 59.099: [ParNew: 373258K->33868K(381696K), 0.0272136 secs] 735369K->395979K(2059008K), 0.0273974 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
J 59.680: [GC 59.680: [ParNew: 377420K->34825K(381696K), 0.0259786 secs] 739531K->396936K(2059008K), 0.0261687 secs] [Times: user=0.06 sys=0.02, real=0.03 secs]
J
J Wed Aug 13 10:50:05 2014
J 60.374: [GC 60.374: [ParNew: 378375K->36874K(381696K), 0.0302984 secs] 740486K->398985K(2059008K), 0.0304678 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
J
J Wed Aug 13 10:50:06 2014
J 60.967: [GC 60.967: [ParNew: 380426K->35850K(381696K), 0.0365359 secs] 742537K->402617K(2059008K), 0.0367110 secs] [Times: user=0.12 sys=0.00, real=0.04 secs]
J 61.538: [GC 61.539: [ParNew: 379371K->36873K(381696K), 0.0278477 secs] 746137K->403639K(2059008K), 0.0280496 secs] [Times: user=0.06 sys=0.00, real=0.03 secs]
J
J Wed Aug 13 10:50:07 2014
J 62.134: [GC 62.134: [ParNew: 380425K->35849K(381696K), 0.0351756 secs] 747191K->405862K(2059008K), 0.0353448 secs] [Times: user=0.13 sys=0.00, real=0.04 secs]
J 62.838: [GC 62.838: [ParNew: 379401K->36010K(381696K), 0.0308404 secs] 749414K->407507K(2059008K), 0.0310537 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
F
F [Thr 2264] Wed Aug 13 10:50:09 2014
F [Thr 2264] *** WARNING => ShmComponent_findAlias: Cannot find alias for URL '/' (rc = 4 object not found). [sfxxjshm.c 2141]
J
J Wed Aug 13 10:50:09 2014
J 64.756: [GC 64.756: [ParNew: 379562K->38144K(381696K), 0.0320298 secs] 751059K->411260K(2059008K), 0.0322031 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
J
J Wed Aug 13 10:50:10 2014
J 65.094: [GC 65.094: [ParNew: 381696K->35840K(381696K), 0.0322410 secs] 754812K->411975K(2059008K), 0.0324455 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
J 65.421: [GC 65.422: [ParNew: 379392K->35840K(381696K), 0.0288936 secs] 755527K->411975K(2059008K), 0.0290622 secs] [Times: user=0.06 sys=0.00, real=0.03 secs]
J
J Wed Aug 13 10:50:13 2014
J 68.078: [GC 68.078: [ParNew: 379392K->38144K(381696K), 0.0665893 secs] 755617K->425283K(2059008K), 0.0667646 secs] [Times: user=0.20 sys=0.03, real=0.07 secs]
J
J Wed Aug 13 10:50:16 2014
J 71.438: [GC 71.438: [ParNew: 381696K->38144K(381696K), 0.0932214 secs] 769080K->449195K(2059008K), 0.0933975 secs] [Times: user=0.30 sys=0.00, real=0.09 secs]
J
J Wed Aug 13 10:50:19 2014
J 74.760: [GC 74.760: [ParNew: 380892K->38144K(381696K), 0.1215723 secs] 792334K->477546K(2059008K), 0.1217688 secs] [Times: user=0.36 sys=0.05, real=0.12 secs]
J
J Wed Aug 13 10:50:22 2014
J 77.119: [GC 77.119: [ParNew: 381696K->38144K(381696K), 0.1395760 secs] 822442K->510048K(2059008K), 0.1397643 secs] [Times: user=0.44 sys=0.02, real=0.14 secs]
J
J Wed Aug 13 10:50:26 2014
J 81.788: [GC 81.788: [ParNewJ
J Wed Aug 13 10:50:27 2014
: 381696K->38144K(381696K), 0.0973212 secs] 854255K->529177K(2059008K), 0.0975087 secs] [Times: user=0.30 sys=0.03, real=0.10 secs]
J
J Wed Aug 13 10:50:30 2014
J 85.066: [GC 85.066: [ParNew: 381696K->38144K(381696K), 0.1079331 secs] 872880K->554405K(2059008K), 0.1081130 secs] [Times: user=0.33 sys=0.02, real=0.11 secs]
J
J Wed Aug 13 10:50:32 2014
J 87.365: [GC 87.365: [ParNew: 381696K->38144K(381696K), 0.1150576 secs] 898125K->576973K(2059008K), 0.1152570 secs] [Times: user=0.36 sys=0.01, real=0.12 secs]
J
J Wed Aug 13 10:50:38 2014
J 92.979: [GC 92.979: [ParNew: 381696K->38144K(381696K), 0.1163222 secs] 922696K->601135K(2059008K), 0.1165078 secs] [Times: user=0.39 sys=0.00, real=0.12 secs]
J
J Wed Aug 13 10:50:40 2014
J 95.237: [GC 95.237: [ParNew: 381512K->38144K(381696K), 0.1529282 secs] 944763K->653296K(2059008K), 0.1531081 secs] [Times: user=0.42 sys=0.03, real=0.15 secs]
J
J Wed Aug 13 10:50:42 2014
J 97.178: [GC 97.178: [ParNew: 381687K->38144K(381696K), 0.0974450 secs] 997172K->766960K(2059008K), 0.0976405 secs] [Times: user=0.30 sys=0.08, real=0.10 secs]
J
J Wed Aug 13 10:50:43 2014
J 98.313: [GC 98.313: [ParNew: 381676K->38144K(381696K), 0.0732400 secs] 1110604K->846500K(2059008K), 0.0734242 secs] [Times: user=0.17 sys=0.09, real=0.07 secs]
J
J Wed Aug 13 10:50:44 2014
J 99.587: [GC 99.588: [ParNew: 381696K->38144K(381696K), 0.0753849 secs] 1190093K->908044K(2059008K), 0.0755849 secs] [Times: user=0.16 sys=0.11, real=0.08 secs]
J 99.671: [GC [1 CMS-initial-mark: 869900K(1677312K)] 909812K(2059008K), 0.0247344 secs] [Times: user=0.03 sys=0.00, real=0.02 secs]
J
J Wed Aug 13 10:50:44 2014
J 99.697: [CMS-concurrent-mark-start]
J
J Wed Aug 13 10:50:46 2014
J 100.908: [GC 100.908: [ParNew: 381696K->38144K(381696K), 0.0917262 secs] 1251676K->998042K(2059008K), 0.0919131 secs] [Times: user=0.23 sys=0.09, real=0.09 secs]
J
J Wed Aug 13 10:50:47 2014
J 102.126: [GC 102.126: [ParNew: 381696K->38144K(381696K), 0.1243224 secs] 1341775K->1085661K(2059008K), 0.1245167 secs] [Times: user=0.20 sys=0.25, real=0.13 secs]
J
J Wed Aug 13 10:50:47 2014
J 102.292: [CMS-concurrent-mark: 1.963/2.595 secs] [Times: user=7.71 sys=2.03, real=2.60 secs]
J 102.292: [CMS-concurrent-preclean-start]
J 102.488: [CMS-concurrent-preclean: 0.148/0.195 secs] [Times: user=0.61 sys=0.13, real=0.20 secs]
J 102.488: [CMS-concurrent-abortable-preclean-start]
J
J Wed Aug 13 10:50:48 2014
J 103.579: [CMS-concurrent-abortable-preclean: 0.771/1.091 secs] [Times: user=3.12 sys=0.62, real=1.10 secs]
J
J Wed Aug 13 10:50:48 2014
J 103.582: [GC[YG occupancy: 237047 K (381696 K)]103.583: [Rescan (parallel) , 0.0362884 secs]103.620: [weak refs processing, 0.0384832 secs]103.658: [class unloading, 0.0505195 secs]103.709: [scrub symbol & string tables, 0.0776361 secs]J
J Wed Aug 13 10:50:49 2014
[1 CMS-remark: 1047892K(1677312K)] 1284939K(2059008K), 0.2482807 secs] [Times: user=0.34 sys=0.00, real=0.25 secs]
J
J Wed Aug 13 10:50:49 2014
J 103.830: [CMS-concurrent-sweep-start]
J 104.714: [CMS-concurrent-sweep: 0.768/0.884 secs] [Times: user=2.73 sys=0.47, real=0.89 secs]
J 104.715: [CMS-concurrent-reset-start]
J 104.728: [CMS-concurrent-reset: 0.014/0.014 secs] [Times: user=0.05 sys=0.00, real=0.01 secs]
J
J Wed Aug 13 10:50:50 2014
J 104.828: [GC 104.828: [ParNew: 381696K->38144K(381696K), 0.0671613 secs] 1236693K->918437K(2059008K), 0.0673483 secs] [Times: user=0.19 sys=0.02, real=0.07 secs]
J
J Wed Aug 13 10:50:52 2014
J 107.545: [GC 107.545: [ParNew: 381661K->38144K(381696K), 0.2107511 secs] 1262005K->1077781K(2059008K), 0.2109489 secs] [Times: user=0.39 sys=0.28, real=0.21 secs]
J
J Wed Aug 13 10:50:57 2014
J 112.296: [GC 112.296: [ParNew: 381680K->38144K(381696K), 0.2150438 secs] 1421318K->1251267K(2059008K), 0.2152338 secs] [Times: user=0.25 sys=0.42, real=0.22 secs]
J
J Wed Aug 13 10:51:02 2014
J 117.461: [GC 117.461: [ParNew: 381583K->4140K(381696K), 0.0469289 secs] 1594706K->1254559K(2059008K), 0.0471146 secs] [Times: user=0.11 sys=0.05, real=0.05 secs]
J
J Wed Aug 13 10:51:15 2014
J 130.205: [GC 130.205: [ParNew: 347692K->38144K(381696K), 0.0584412 secs] 1598245K->1290061K(2059008K), 0.0586428 secs] [Times: user=0.22 sys=0.00, real=0.06 secs]
J
J Wed Aug 13 10:51:24 2014
J 139.253: [GC 139.253: [ParNew: 381696K->38144K(381696K), 0.2258658 secs] 1633613K->1373856K(2059008K), 0.2260866 secs] [Times: user=0.61 sys=0.02, real=0.23 secs]
J
J Wed Aug 13 10:51:30 2014
J 145.501: [GC 145.501: [ParNew: 381696K->38144K(381696K), 0.1258713 secs] 1718123K->1422493K(2059008K), 0.1261312 secs] [Times: user=0.39 sys=0.02, real=0.13 secs]
J 145.636: [GCJ
J Wed Aug 13 10:51:31 2014
[1 CMS-initial-mark: 1384349K(1677312K)] 1427189K(2059008K), 0.0535896 secs] [Times: user=0.06 sys=0.00, real=0.05 secs]
J
J Wed Aug 13 10:51:31 2014
J 145.690: [CMS-concurrent-mark-start]
J
J Wed Aug 13 10:51:32 2014
J 147.302: [CMS-concurrent-mark: 1.569/1.612 secs] [Times: user=2.70 sys=0.28, real=1.62 secs]
J 147.303: [CMS-concurrent-preclean-start]
J 147.330: [CMS-concurrent-preclean: 0.024/0.028 secs] [Times: user=0.05 sys=0.00, real=0.03 secs]
J 147.330: [CMS-concurrent-abortable-preclean-start]
F
F [Thr 2264] Wed Aug 13 10:51:36 2014
F [Thr 2264] *** LOG => State changed from 10 (Starting apps) to 3 (Running).
F [Thr 2264] *** LOG state real time: 98.580 CPU time: 20.670 sys, 143.988 usr
F [Thr 2264] *** LOG total real time: 152.349 CPU time: 27.814 sys, 228.229 usr
F [Thr 2264]
J
J Wed Aug 13 10:51:37 2014
J CMS: abort preclean due to time 152.391: [CMS-concurrent-abortable-preclean: 2.924/5.060 secs] [Times: user=4.04 sys=0.58, real=5.08 secs]
J
J Wed Aug 13 10:51:37 2014
J 152.400: [GC[YG occupancy: 246680 K (381696 K)]152.400: [Rescan (parallel) , 0.1940158 secs]152.594: [weak refs processing, 0.0143033 secs]152.609: [class unloadingJ
J Wed Aug 13 10:51:38 2014
, 0.0556606 secs]152.665: [scrub symbol & string tables, 0.0852505 secs] [1 CMS-remark: 1385469K(1677312K)] 1632149K(2059008K), 0.3894964 secs] [Times: user=0.42 sys=0.00, real=0.39 secs]
J
J Wed Aug 13 10:51:38 2014
J 152.790: [CMS-concurrent-sweep-start]
J 153.421: [CMS-concurrent-sweep: 0.631/0.631 secs] [Times: user=0.83 sys=0.00, real=0.63 secs]
J 153.421: [CMS-concurrent-reset-start]
J 153.435: [CMS-concurrent-reset: 0.014/0.014 secs] [Times: user=0.00 sys=0.00, real=0.01 secs] -
When trying to create a new user profile service application on a new SharePoint install I get the following error:
"The specified database is not a valid synchronization database"
The installation then fails and does not create the third database.
I found some threads with similar problems but it involved upgrading an existing db. In this case we want to create a new one. Here is the relevant ULS log info:
Starting schema provisioning of SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
Provisioning the SP15_TEST_ENT_SyncDB database with the script at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\SQL\SPS\drop_procs.sql.
Provisioning the SP15_TEST_ENT_SyncDB database with a script stream.
Ensuring that the SP15_TEST_ENT_SyncDB database exists . . .
The SP15_TEST_ENT_SyncDB database does not exist.
It will now be created.
Setting the AutoClose option to False on the database SP15_TEST_ENT_SyncDB.
Setting the ArithAbort option to True on the database SP15_TEST_ENT_SyncDB.
Setting the TruncLogOnChkpt option to True on the database SP15_TEST_ENT_SyncDB.
Starting schema evaluation of existing SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
Validate Database: validating sync database
Validate Database: validation failed: Error code -2
Application error when access /_admin/NewProfileServiceApplicationSettings.aspx, Error=The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Microsoft.SharePoint.Administration.SPDatabaseException: The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.Administration.SPDatabaseException:
The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
I Tried to create another one under a different name (databases also) and I get the same error.
The SharePoint instance has the march mandatory update installed. The sql instance we are using is an existing SQL cluster for other SharePoint poc's.
Has anybody seen this issue before?I had the same problem and could not figure out what was wrong for the longest time. I then had the idea to check in the model system database to see if there were any extra custom tables in that database. Any tables that are in the model database
are put into any new database when it is created. I had some custom tables in the model database so I deleted the custom tables in the model database and deleted the failed user profile service application and its databases and then tried to recreate
the user profile service application again and it worked with no errors -
Getting Error Msg "usdsop cannot create a new process" in Log File
Hi All,
I have installed r12 in my personal LapTop.
Every thing looks fine..
For testing purpose, I have created a Shell Script and registered concurrent program.
While i am running this program, program is getting error out with below message.
D:\oracle\VIS\apps\apps_st\appl\po\12.0.0\bin\TEST_CONVERT.exe
usdsop cannot create a new process
Cause: usdsop encountered an error creating a new process. [Reason].
Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more resou (RE
Executing request completion options...
Please help me in resolving this issue.
Thanks
SandeepWhat is your OS?
Did you complete the steps in these docs?
How to Register a Host Concurrent Program in Applications [ID 156636.1]
How To Create A Custom Concurrent Program With Host Method and Pass Parameters To The Shell Script [ID 266268.1]
How Do You Run A Unix Host Script From Concurrent Managers On MS Windows Platform? [ID 412392.1]
How To Setup A Custom Concurrent Host Program [ID 147455.1]
Thanks,
Hussein -
Creating a new application profile
Hi Hyperion Gurus,
Need your advice on an issue we are facing now:
In our current application (HFM 11.1.2.2. EPMA), we have created our application profile with only English as the language. We have 3 applications residing on our current profile.
We now have a requirement as to include Japanese as a language. I am aware that I can not make changes to the alias dimension in the existing application. This means that we will have to create a new application profile.
My question is: What will happen to the existing shared library that we use for our current applications? When I create a new application will it impact the old ones?
Any thoughts and ideas are greatly appreciated!
Thanks,
Steffi.Hi Thanos,
so I did create a new application profile and included the languages I needed. And when I created the application, the Alias dimension is blank.
Here are the steps that I followed:
1. Create a new application profile from the desktop client.
2. Opened work space and created New application from Administer > Consolidation Administration.
3. Registered the application to Shared Services.
4. Transformed the classic app to EPMA in order to use the Shared library
Not sure what I am missing. I have attached a screenshot of the dimension library from my new application. -
Auto patch error usdsop cannot create a new process
Hi i am applying hrms family pack k in one vision db in testnode but i am getting following error.Any idea
appsversion 11.5.10 and windows 2003 advanced server
Generating product JAR files in JAVA_TOP -
j:\oracle\viscomn\java with command:
adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @j:\oracle\visappl\admin\VIS\out\genjars.cmd
Error:
usdsop cannot create a new process
Cause: usdsop encountered an error creating a new process. [Reason].
Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more resou (RE
Failed to generate product JAR files in JAVA_TOP -
j:\oracle\viscomn\java.
adogjf() Unable to generate jar files under JAVA_TOP
AutoPatch error:
Failed to generate the product JAR files
rgds
rajeshThis is the primary reason I dislike doing Oracle Apps on Windows.
If something bad happens while patching, and you find yourself without critical ad executables because relink failed, you need to run relinkenv.cmd to (re)create the APPS.SH unix-style environment (forward slashes) for relink.sh.
Source or double click on envshell.cmd
sh adrelink.sh force=y "ad adjava.exe"
Backup Mode is "file"
Removing Application products' bin directories from PATH ...
Done removing Application products' bin directories from PATH
Removing $FND_TOP/$APPLBIN from PATH ...
sed: number in \[0-9] invalid
Done removing $FND_TOP/$APPLBIN from PATH
awk: adrelink.sh 4107: not found
grep: adrelink.sh 4107: not found
grep: adrelink.sh 4107: not found
echo: adrelink.sh 4107: writing: The pipe is being closed.
awk: adrelink.sh 4107: not found
ORACLE RDBMS Version 8.0.6.0.0
Oracle Reports Version 6.0
Oracle Applications Release
Unable to determine the release number.
To resolve:
type relinkenv.cmd
This creates APPS.SH.
Source or double click on envshell.cmd to create a new session.
Now type sh
At the command prompt, type . ./APPS.Sh
now adrelink.sh force=y "ad adjava.exe"
You are running adrelink, version 115.85
Start of adrelink session
Date/time is Fri Jul 20 20:22:35 PDT 2007
Log file is d:/oracle/visappl/admin/log/adrelink.log
Command line arguments are
"force=y" "ad adjava.exe"
Done with link of ad executable 'adjava.exe' on Fri Jul 20 20:27:07 PDT 2007
Done relinking module adjava.exe in product ad
Done with link of product 'ad' on Fri Jul 20 20:27:07 PDT 2007
adrelink is exiting with status 0
End of adrelink session -
Error : usdsop cannot create a new process
Hi DBA's,
I am applying ADI.6 patch 6502082. It was error out with the follwing error message. Kindly check and give me your valuable solution.
** Backing up $JAVATOP/META-INF/JRIMETA.DAT...
Copying JRIMETA.DAT to JRIMETA.DAT.BackedupByAdpatch ...
Copied JRIMETA.DAT to JRIMETA.DAT.BackedupByAdpatch.
** Successfully backed up JRIMETA.DAT.
STRT_TASK: [Run adjcopy.class] [] [Wed Dec 24 2008 14:24:09]
Running adjcopy.class:
adjava -mx512m -nojit oracle.apps.ad.jri.adjcopy @f:\MIGR\migrappl\admin\MIV\out\apps.cmd
Error:
usdsop cannot create a new process
Cause: usdsop encountered an error creating a new process. [Reason].
Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more resou (RE
Thanks.Hi Ronald,
please check the bellow one
C:\Documents and Settings\oracle>which sed
E:\UTIL\MKS\mksnt/sed.exe
C:\Documents and Settings\oracle>which cl.exe
E:\util\VC98\bin/cl.exe
C:\Documents and Settings\oracle>which %PATH%
which: Files\Dell\SysMgt\oma\bin;E:\util\VC98\Tools\WinNT;E:\util\VC98\MSDev98\Bin;E:\util\VC98\Tools;E:\util\VC98\bin;E:\apps\U
\uatora\8.0.6\bin;C:\Perl\site\bin;C:\Perl\bin;E:\UTIL\MKS\bin;E:\UTIL\MKS\bin\x11;E:\UTIL\MKS\mksnt;C:\WINDOWS\system32;C:\WIND
S;C:\WINDOWS\System32\Wbem;C:\Program: name too long
C:\Documents and Settings\oracle>
Thanks -
Cannot create a new Offline Address Book
I have 2 instances of Exchange Server installation in one single organisation (by one per domain):
1. Exchange 2010 Version 14.3 (Build 123.4).
2. Echange 2013 Version 15.0 (Build 1044.25).
I have created new OAB and arbitration mailbox following
this article.
It is result of command:
[PS] C:\Windows\system32>Get-Mailbox -Arbitration | where {$_.PersistedCapabilities -like "*oab*"} | ft name,servername
Name ServerName
BK Arbitration OAB vsrv-exbk
But when i try generate new OAB using command:
Update-OfflineAddressBook -Identity "OAB-FAB"
I get this error message:
Не удалось создать автономную адресную книгу "\OAB-FAB". Это может быть вызвано двумя причинами: служба помощников по обслуживанию почтовых ящиков не
запущена на сервере "SRV-MAILBOX.xxx.local" или у вас нет разрешений на выполнение этой операции. Сообщение об ошибке: "Не удается вызвать службу по
мощников по обслуживанию почтовых ящиков на сервере. 'SRV-MAILBOX.xxx.local': сбой. Ошибка RPC: -2147220990.".
+ CategoryInfo : InvalidResult: (OAB-FAB:OfflineAddressBookIdParameter) [Update-OfflineAddressBook], LocalizedException
+ FullyQualifiedErrorId : [Server=VSRV-EXBK,RequestId=84bb0fb1-d6dd-4718-a704-4e9a20e178b6,TimeStamp=19.02.2015 12:07:00] [FailureCategory=Cmdle
t-LocalizedException] 12FE7FE1,Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateOfflineAddressBook
+ PSComputerName : vsrv-exbk.xxx.local
Roughly translation from Russian is - "Cannot create a new Offline Address Book
"\OAB-FAB" This may be caused to two reasons: the service "Mailbox Assistant service." did not started on "SRV-MAILBOX.xxx.local"
server or you do not have permission to perform this operation.
I investigated this situation and found out that i have "Organisation Management" role on my account, and "Mailbox Assistant service." is started on server "SRV-MAILBOX.xxx.local".
I try to restart the service but it does not fix this issue.
Please help me ;)Hi,
How did you create a new OAB and an OAB Generation Mailbox? When creating new OABs after Exchange CU5, we need to specify the GeneratingMailbox property.
For example:
New-Mailbox -Arbitration -Name "BK Arbitration OAB" -Database DB4 -UserPrincipalName [email protected] –DisplayName " BK Arbitration OAB"
Set-Mailbox "BK Arbitration OAB" –Arbitration –OABGen $true
New-OfflineAddressBook -Name "OAB-FAB" –GeneratingMailbox "CN= BK Arbitration OAB,CN=Users,DC=contoso,DC=com" –AddressLists "Default Global Address List"
For more information, please refer to this article.
http://blogs.technet.com/b/exchange/archive/2014/05/13/oab-improvements-in-exchange-2013-cumulative-update-5.aspx
Best Regards. -
Creating a New Document Profile CS5
I have created a New Document Profile that I want to use as a base when starting Ilustrator work. I cleared pallettes colors, brushes, symbols etc and created 3 new common layers etc. When I select my file from the New Document Profiles pull down menu the Layers pallette opens with only a blank Layer1 .The work on my custom Layers that I would like as masters is gone.
Where did you save the new file?
Looks like you're right. Seems only way is to Save the file as a Template file and use New from template from the file menu. -
All of a sudden, I cannot create any new groups within Address Book! Will not work either from the plus sign at the bottom of the group list or the main menu!
Any advice on how to resolve?quit Address book and delete the file homedirectory/library/application support/address book/AddressBook-v22.abcddb. then start Address Book and see if you can create groups.
-
Cannot create a new connection
I have created connections in the past with no problems. Today I upgraded to V2 and had exported my connections and so imported them to the new version. Since then I cannot create a new connection.
Right clicking and selecting New Connection does nothing, whereas clicking new and selecting Database Connection results in a java.lang.NullPointerException error.
I have done a full re-install of Raptor from the original files and switched off my PC, but no luck.Gareth, try the existing thread, and see if that helps:
Can't create a connection
the Search forum is a good place to start for most problems
Maybe you are looking for
-
Connecting Mac Mini to Sharp LCD 45" TV
I just purchased a MINI for Xmas 09'. I have tried to connect it to my 45" tv via: DVI and S-Video connections, both have been un-successful! The only time the Mini shows a display is if I connect to a 17" computer monitor..... I purchased the Mivi-
-
I have Lost my safari app from my my, my daughter downloaded frostwire toolbar, and safari icon wouldnt respond , so i uninstalled frostwire and still could not get safari to respond, then i reset safari and lost everything, i tried to ininstall it f
-
When I import a calendar from palm desktop, my all day events (banners in Palm) spread out to two day events in iCal. Is there any way to fix this without going day by day and correcting it?
-
Need access the E1000's web-based setup page.
I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for
-
Cannot reach boot selector screen
With OS 10-3-9, I selected a bad boot device. Now boot fails with msg Input not supported. How do I get back to the boot selector screen to select the correct boot device? I have no 10.3 bootable disks. The keyboard is connected via usb only. This is