Cannot Create Custom Mobile ButtonSkin in Burrito

Using Flash Builder Burrito on Windows XP. In design mode, when I right-click on button and then choose 'Create Skin', as I begin to populate the fields, I get the message 'The skin specified to copy is not valid' when referencing: 'spark.skins.mobile.ButtonSkin' within the 'Create as copy of field'. When I twirl the drop-down I do not even see the 'mobile' package under spark.skins so I have tried adding various swc's/themes to the build path from the 4.5 sdk but no luck. Anyone else had this problem?

Since no one answered and I was looking for a similar problem, here is what I did:
- the theme is located in the installation folder:  ~\4.5.0\frameworks\themes\Mobile\mobile.swc
- I've imported the Theme from the Appearance View
- I've selected the mobile theme as my current theme and I am still not able to find the spark.skins.mobile.ButtonSkin
here it says it is a preview: Reference
so, it might not be available yet.
Have fun.
Claudiu.

Similar Messages

  • Bonded Warehouse: Cannot create Customs Declaration

    Does anyone have any experience with Bonded Warehouse that they could help with the following?
    I have setup Bonded Warehouse in GTS, but am unable to create any Customs Declarations from the PO/Goods Receipt. After creating the PO, Delivery, and Goods Receipt in R/3, I am able to see the corresponding entry in the "Display Customs Declaration/Goods Receipt Quantities" report in GTS, however it does not appear in the "Display Assigned Logistics Documents from Worklist" and I cannot create the Customs Declaration for it.
    Does anyone have any ideas that could help with this? Thanks!

    Hi Tom
    This one is a fairly old thread that you had initiated. I am now in a similar situation in our project where we are trying to configure CWH and are not able to create customs declaration. The worklist shows the status as 'Customs declaration not needed'. Did you find any way out on this issue you faced? Please let me know.
    Regards

  • Creating Custom Mobile Application with CRM

    Hi ,
    After reading some staff about the CRM Mobile client solutions , I have not figure it out weather I can create my own mobile applications  using the CRM Mobile Technology .
    I know that the mobile clients need CRM Middleware server for synchonization and for access to backend systems, but can I call any rfc on any backend system (for example R3)
    for synchronization meaning that my CRM server will be used only as middleware server to access non crm functionality on other backend systems
    Thnaks,
    Oren

    What you can do is the following:
    data-save on MSA triggers an outbound sbdoc (containing the update objects)
    -->this one is sent to CRM by the conntrans
    --> the sbdoc is created from the data, stored in the inbound queue, and processed through it's CRM flow (meaning mapping to mbdoc, processing of inbound mbdoc, creation of outbound mbdoc and mapping to outbound sbdoc).
    What you can do is use or exit the bdoc flow to trigger whatever other process you want.
    What exactly is the requirement?
    Michael.

  • Cannot create custom controls

    I have the following .ctl file and I am having problems creating a custom control out of it. It is a push button and LED tied together with a frame around it. How can I create this as one control that I can use in my other .vi's?
    Thanks

    Okay, I went ahead and did it.
    I did as I described below and here is the result:
    Attachments:
    indicator_button.ctl ‏6 KB

  • EMPDK Create Custom Plugin Error..

    Hello,
    I have a problem after running the following command:
    empdk create_custom_plugin_update -out_dir c:\EMEDK -agent_state_dir H:\ORACLE\agent11g -agent_oracle_home H:\ORACLE\agent11g -plugin_id generic_application_server
    I cannot create custom plugins. The log from the following output:
    Parsing agent registry file: H:\ORACLE\agent11g\sysman\registry.xml
    2014-01-15 17:01:54,678
    [main] ERROR profiles.PluginProfileCreator logp.251 - Error retrieving plug-in oracle home
        details: H:\ORACLE\agent11g\sysman\registry.xml (The system cannot find the file specified)
    java.io.FileNotFoundException:
      H:\ORACLE\agent11g\sysman\registry.xml (The system cannot find the file specified)
    at java.io.FileInputStream.open(Native Method)
      at java.io.FileInputStream.<init>(FileInputStream.java:120)
      at oracle.sysman.pdk.profiles.PluginProfileCreator.getAgentPluginHome(PluginProfileCreator.java:720)
      at oracle.sysman.pdk.profiles.PluginProfileCreator.execute(PluginProfileCreator.java:211)
      at oracle.sysman.pdk.Main.main(Main.java:123)
    2014-01-15 17:01:54,678 [main] INFO  pdk.Main logp.251 - Step name:Duration
    how can I fix it?

    Hi Amit,
    For showing custom error pages with SAP J2EE engine, you ned to modify the SAP J2EE Engine Deployment Descriptor 'web.xml'.
    For WAS 6.40, web.xml is stored in a , /WEB-INF/   You can locate the /WEB-INF/ directory in the portal installation directory: <SAP SYSTEM ID>/jc_<INSTANCE_NUMBER>/j2ee/cluster/server_<INSTANCE_NUMBER> /apps/sap.com/irj/servlet_jsp/irj/root/web-inf/
    In web.xml file, you can add following tag
    <error-page>
    <error-code>500</error-code>
    <location>/customErrorPages/CustomErrorPage.html</location>
    </error-page>
    SAP J2EE Engine needs to be restarted for changes to take effect.
    Hope this helps.
    Regards,
    Prasanna

  • USB-6009 Daqmx Base 3.3 Cannot creat 2 or more channels on Windows mobile 6

    Hello,
    I have USB-6009, PDA iPAQ 214, WM6, Daqmx base 3.3, Labview 2009. In order to create new mobile project I use wizard and standart dynamic example: Cont Acq&Graph Voltage-Int Clk.vi. All works ok, but if I add more chanels in VI "Create Channels" or place new VI block and enter "Dev1/ai1", exe on my PDA cannot work correctly. Exception after RUN. I have no idea how build correct application with 3 channels without this exeption...  On PC all works. Whay right way to create channels? I attach VI which don't work, for examle. I read daqmxbase cannot support WM6, but 1 channel work ideal!
    Attachments:
    diagramm.jpg ‏113 KB

    Vital000,
    I forgot to mention that, yes, Windows Mobile 6 is not supported along side of DAQmx Base. That means you might be able to get some  of the same functionality(limited) that you would with Windows Mobile 5, but most likely not 100% functionality. This could explain why 1 channel works and multiple channels do not. I will try and help you out, but as this is not supported my ability to help is limited.
    Ben Sisney
    FlexRIO V&V Engineer
    National Instruments

  • Cannot create PDF w/ custom page size in FM 9

    I just upgraded to the new Technical Communication Suite and cannot create a PDF from FrameMaker with a custom page size anymore. I need to create a PDF with a page size of 8.125" by 10.875", and have tried both Save As PDF and Print to the PDF driver. I followed all of the instructions on how to do so via the PDF printer driver's "Printing Preferences", Adobe PDF page size, etc. When that didn't work, I also tried Save As PDF with a custom page size ... still won't print to the custom size no matter how many places I specify it.
    My only way to get my custom page size at this point is to create the PDF and then go in and modify Document > Crop Pages > Change Page Size to Custom, and specify my size. This is clearly less than desirable.
    I am using FM version 9.0p 196. Any help/advice/suggestions welcome!

    Cindy,
    You should get the FM updates. There have been 3 patches released since the 9.0p196 version. Install them in order.
    Before creating PDFs, make certain that your default printer is set to the AdobePDF printer instance. The SetPrint utility from Sundorne helps ensure that this is always the case for FM, see http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm
    In the Save As PDF dialogue, set the "Page Size" for the output on the Settings tab, as shown here:
    Set your PDF joboptions for the appropriate press requirements.
    Set your registration if required.
    Make sure the "Convert CMYK Colors to RGB" is set (the PDF CMYK generation is still buggy).
    Hit the "Set" button and you should get the correctly sized output.
    When you were creating the ouptut via the printer route, if you had set the "Generate Acrobat Data" option, then FM sets the document so that it is always cropped to the FM page size, rather than the printer specified output sheet size, in the final PDF. Omit setting this option and it should work via this route as well.

  • How to create custom Item Renderers List for mobile?

    Hi,
       I have seen many samples using List with Item Renderers (image, label, message below the label and decorator) for mobile apps.
    But what I need is, I need to create a List with the below items.
    Item 1. Image
    Item 2. a small icon
    Item 3. Label with 1 or 2 lines
    Item 4.  a Favourite button (like Favourites + or - button). If I like this item, I add it into my favourites list
    Item 5. decorator arrow > to go the Detail view.
    I am new to Adobe Flash Builder and Flex development. Can anyone show me some samples on how to do this?

    Method One:
    I have created simple application page and i used powershell command(Set-SPCustomLayoutsPage -Identity "AccessDenied" -RelativePath "/_layouts/ExampleAccessDenied.aspx" -WebApplication "http://DEVWEBAPPLICATION")
    to change the new custom page.But it will be applied to all site collections in web application.
    Method Two: I have created custom masterpage and added following script. And referred this Custom masterpage in the custom access denied page.But it Never comes to this script.
    script type="text/javascript">  
      _spBodyOnLoadFunctionNames.push("redirectToCustomAccDenPage");  
      function redirectToCustomAccDenPage()  
       if( -1 != location.href.toLowerCase().indexOf('http://yoursitename/_layouts/accessDenied.aspx') )
       var url = 'https://' + window.location.host + '/mysite/customPages/customAccessDenied.aspx';
       window.location.replace(url);
       else
       alert(location.href);
     </script> 
    Method 3:
    I have Created custom HTTP module and implemented and it is working fine. But  the problem is it will be called for the all the requests in the web applicaton.
    COuld you let me know alternate apporach.
    Thanks
    Ravi P
    Ravi

  • You cannot create a customer with grouping ZLES

    hi friends,
    I am encountered with the below message during BP creation "You cannot create a customer with grouping ZLES"
    ZLES being the account group..
    I ve come across the following..
    I made config for BP to Customer ( auto creation)
    and also BP to Vendor ( auto creation)
    at a time only one of the thing is working either BP to customer or BP to vendor..
    when i check the config  under Number Range>Define Groupings and Assign Number ranges> in this there is a radio button Int.Std.Grping if this is marked for the grouping of Mast tenant with Cust acc  then there is no error for this but error persists while creating BP to Vendor.. and if the radio button is ticked for Landlord with vendor Account then the issue comes for BP to Customer i.e the error "You cannot create a customer with grouping ZLES"
    how can i tick both of them together ( if there is possiblity)
    kindly help

    sorry for late reply.
    if ur issue isn;t solved?----
    in  Define Groupings and Assign Number Ranges dont select the raido button for your grouping . and next thing is while creating business partner. follow these steps...
    1 bp
    2 click on person, group or org as desired
    3 select the role and click create. AND
    4 at right hand side corner there is Grouping select the Grouping ( i was missing this step due to which i used to get the error)
    hope this will solve ... also check the account groups of both BP and Customer or else there will be synchronisation error..
    regards

  • Cannot create mobile account

    I have to admit that I'm new to OS X server and what should have been simple isn't proving to be that way. I have managed to get one of my client laptops authenticating but now when I go to create a mobile account it works for some users but not for mine - I suspect this is because of a clash of names on the host laptop. Is this correct and how can I fix it?

    Look in the system log for clues.
    Also you can turn on ManagedClient logging from Terminal this way:
    sudo defaults write /Library/Preferences/com.apple.MCXDebug debugOutput -2
    Then reproduce the problem. The log will be here:
    /Library/Logs/ManagedClient/ManagedClient.log
    Remove /Library/Preferences/com.apple.MCXDebug.plist to stop logging (and increase performance).
    And please file a bug with Apple.

  • "Grouped" user cannot create Mobile account

    Hello
    Leopard Server 10.5.4 and Leopard client 10.5.4.
    In Server, we have a group of users called Group1. In this group we have a user called User1. When we try to create a mobile account, prompts for password, and then "There was an error creating mobile account" appears.
    When we try to create Mobile account for any user outside any group we have no problem.
    The Mobility prefs are the same in the Group1 and in the account outside the group.
    Any help appreciated.
    K.

    Look in the system log for clues.
    Also you can turn on ManagedClient logging from Terminal this way:
    sudo defaults write /Library/Preferences/com.apple.MCXDebug debugOutput -2
    Then reproduce the problem. The log will be here:
    /Library/Logs/ManagedClient/ManagedClient.log
    Remove /Library/Preferences/com.apple.MCXDebug.plist to stop logging (and increase performance).
    And please file a bug with Apple.

  • Creating Custom Validators for ADF in JDev 10.1.3.1

    Hi all,
    I'm trying to create a validator to solve a seemingly common problem - that is given 2 dates (startDate & endDate), validate that endDate cannot be earlier than startDate.
    In my case, both startDate and endDate are in the same form. From the ADF Developers Guide, the recommended approach is to create the validation method on the page's backing bean. But in my application, there are many occurrences of startDate and endDate in other forms, therefore having the validation method on the backing bean might not be the best solution.
    I tried to create my own custom validator and tying it to a tag library stated in http://java.sun.com/j2ee/1.4/docs/tutorial/doc/JSFDevelop6.html#wp999130, but that didn't seem to work either. I'm not sure if creating custom validators by extending the ValidatorTag is supported in ADF.
    Would appreciate it if someone has any suggestions on how to create the validator that I need, without having validation methods that does the same thing all over my backing beans.
    TIA.
    Regards,
    Lennard

    Hi,
    of course, ADF Faces supports custom validators because it is compliant to the JSF APIs runnting on the JSF RI.
    Another approach for validation would be on the business service level. Assuming you use ADF BC, the EO can have a method validator defined that is automatically inherited by all its views. The disadvantage though is that the error message would have to come from the server, requiring custom error message handling for user friendly messages as described in the developer guide.
    Looking forward, in a next release of ADF the binding ayer will allow more complex validations thus not requiring to handle complex validation on teh business service.
    So far however I think that using a custom validator is the best you can do. Note that in the case of ADF BC the date is of type oracle.jbo.server.domain.Date and not java.util.Date, which might be a hint to check for your validator issue
    Frank

  • Error while creating customer account sites from backend

    I am creating Customer Account Sites using the TCA API from Toad.
    I am getting the following error
    The operating unit is either invalid or it cannot be derived. Please verify your Multi-Org profile options.
    The Operating unit has been defined.
    I am using the following code:
    DECLARE
    p_cust_acct_site_rec hz_cust_account_site_v2pub.cust_acct_site_rec_type;
    x_return_status VARCHAR2(2000);
    x_msg_count NUMBER;
    x_msg_data VARCHAR2(2000);
    x_cust_acct_site_id NUMBER;
    BEGIN
    p_cust_acct_site_rec.cust_account_id := 9462;
    p_cust_acct_site_rec.party_site_id := 5473;
    --p_cust_acct_site_rec.language := 'US';
    p_cust_acct_site_rec.org_id := 126;
    p_cust_acct_site_rec.created_by_module := 'TCA-EXAMPLE';
    hz_cust_account_site_v2pub.create_cust_acct_site(
    'T',
    p_cust_acct_site_rec,
    x_cust_acct_site_id,
    x_return_status,
    x_msg_count,
    x_msg_data);
    dbms_output.put_line(SubStr('x_return_status =
    '||x_return_status,1,255));
    dbms_output.put_line('x_msg_count = '||TO_CHAR(x_msg_count));
    dbms_output.put_line(SubStr('x_msg_data = '||x_msg_data,1,255));
    IF x_msg_count >1 THEN
    FOR I IN 1..x_msg_count
    LOOP
    dbms_output.put_line(I||'. '||SubStr(FND_MSG_PUB.Get(p_encoded =>
    FND_API.G_FALSE ), 1, 255));
    END LOOP;
    END IF;
    END;
    Thanks and Regards,
    K tanna

    Duplicate post.
    Error while creating customer account sites
    Error while creating customer account sites

  • Error While Creating Customer Account Site.

    Hi ,
    I am creating a customer thru API's.
    I am succesffuly creating location,party,party site,party site use,customer account.But unable to create customer account site. I am getting the below error:
    Unable to process your transaction. The operating unit is either invalid or it cannot be derived. Please verify your Multi-Org profile options.
    Could anyone help me to resolve out this issue.

    Hi,
    What is the application release?
    Did you set the Application/Multi-org context properly before using this API?
    Note: 732671.1 - 'Change PO API' Errors with 'Multi-Org profile options' as Org Context Is Not Set Correctly
    Note: 420787.1 - Oracle Applications Multiple Organizations Access Control for Custom Code
    Note: 209185.1 - How To Set the Applications Context (FND_GLOBAL.APPS_INITIALIZE)
    Regards,
    Hussein

  • Getting Error Msg  "usdsop cannot create a new process" in Log File

    Hi All,
    I have installed r12 in my personal LapTop.
    Every thing looks fine..
    For testing purpose, I have created a Shell Script and registered concurrent program.
    While i am running this program, program is getting error out with below message.
    D:\oracle\VIS\apps\apps_st\appl\po\12.0.0\bin\TEST_CONVERT.exe
    usdsop cannot create a new process
    Cause: usdsop encountered an error creating a new process. [Reason].
    Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more resou (RE
    Executing request completion options...
    Please help me in resolving this issue.
    Thanks
    Sandeep

    What is your OS?
    Did you complete the steps in these docs?
    How to Register a Host Concurrent Program in Applications [ID 156636.1]
    How To Create A Custom Concurrent Program With Host Method and Pass Parameters To The Shell Script [ID 266268.1]
    How Do You Run A Unix Host Script From Concurrent Managers On MS Windows Platform? [ID 412392.1]
    How To Setup A Custom Concurrent Host Program [ID 147455.1]
    Thanks,
    Hussein

Maybe you are looking for