Cannot create directory Bonjour

Tried to install itues and get the same error "cannot create directory program files/Bonjour. A file with this name already exists...etc.
I searched for such a file, deleted it , but still get the same errorr. I unistalled itunes, tried to reinstall an older version...same error...
Any thoughts?

Hello. Have you attempted to just install Bonjour by itself?
http://support.apple.com/downloads/Bonjourfor_Windows_1_05
Also if you need to go to Control panel and uninstall Bonjour, Reboot, then come back and install latest Bonjour at link above. Followed by iTunes if it installs.

Similar Messages

Cannot create directory `/home/a/.config/openbox

Hi All,
I'm trying to setup openbox because it is so highly recommended in Arch but I get this:
[a@Astudio ~]$ mkdir -p ~/.config/openbox/
mkdir: cannot create directory `/home/a/.config': Permission denied
[a@Astudio ~]$ su
Password:
bash-3.2# chmod -R 755 /home/a/
bash-3.2# exit
exit
[a@Astudio ~]$ mkdir -p ~/.config/openbox/
mkdir: cannot create directory `/home/a/.config/openbox/': Permission denied
[a@Astudio ~]$ su
Password:
bash-3.2# chmod -R 755 /home/
bash-3.2# exit
exit
[a@Astudio ~]$ mkdir -p ~/.config/openbox/
mkdir: cannot create directory `/home/a/.config/openbox/': Permission denied
Does anyone know what I'm doing wrong.
Thanks,
Arthur
sorry about the double post!
Last edited by Frabato (2008-10-18 02:41:01)

Have you just installed Arch? Is there a chance that you're not the owner of your home directory? (check "ls -l /home/" to be sure... if not, chown it)
I don't know what else it could be but someone here will surely have an idea.

Cannot create directory - dbca error message

i am trying to create database through dbca in 10.2 in windows vista
in 12 step while click finish button i am getting
"cannot create directory f:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\catdb"
please give solution for this. Thanks in advance.
Edited by: user8941653 on Feb 7, 2011 12:14 AM
Edited by: user8941653 on Feb 7, 2011 12:15 AM

According to the download page the minimum supported version on Vista is 10.2.0.4 but the installation guide states 10.2.0.3.0.
According to the installation guide you need administrator rights to run DBCA.
How are you running DBCA? From the Start menu or from command line?

Error Cannot create directory /tmp/ .xorg.conf72

During an install of Solaris 10 (as a virtual machine) I was attempting to run /usr/X11/bin/xorgconfig
I received the following error:
Cannot create directory /tmp/ .xorg.conf72
Any Ideas as to how I could fix the problem?

Hi,
So, try to create this folder by your hands before create the track and assign all permissions to sap admin user.
It will solve this issue.
regards,
Luciano

Cannot Create Directory During Installation

I've been going through the various fixes posted by the top users (a very helpful and intelligent bunch) but I haven't seen a fix for my particular issue. After downloading iTunes v7.6, during the installation process I receive a message:
Cannot create the directory C:\WINDOWS\Installer\{80FD852F-5AAC-4129-B931-06AAFFA43138}. A file with this name already exists. Please rename or remove the file and click retry, or click cancel to exit.
I have searched my system and there is no other file with that name on my hard drives anywhere. Does anyone have an idea why this is happening and what can be done to resolve this issue?

I found the answer myself. I entered into safe mode with the c: prompt. I was then able to locate and delete the file in C:\WINDOWS\Installer. I then went and deleted the files via add/delete program files. Per previous recommendations, I also deleted all iTunes and Quicktime folders/files in C:\Program Files and C:\WINDOWS\system32. Then I emptied the recycled bin, rebooted the computer and reloaded iTunes/Quicktime off the Apple iTunes web site. I hope this information helps someone else.

Can't create directory while in fakeroot

Hi all,
I'm trying to create a PKGBUILD for mplabx. When the installer tries to create the directory /opt/microchip, it gets the error permission denied.
My pkgbuild:
# This is an example PKGBUILD file. Use this as a start to creating your own,
# and remove these comments. For more information, see 'man PKGBUILD'.
# NOTE: Please fill out the license field for your package! If it is unknown,
# then please put 'unknown'.
# Maintainer: Cedric de Wijs <[email protected]>
pkgname=microchip_mplab-x
pkgver=7.02
pkgrel=1
epoch=
pkgdesc=""
arch=('x86_64')
url="http://www.microchip.com/en_US/family/mplabx/index.html"
license=('unknown')
groups=()
depends=()
makedepends=()
checkdepends=()
optdepends=()
provides=()
conflicts=()
replaces=()
backup=()
options=()
install=
changelog=
source=(http://ww1.microchip.com/downloads/mplab/X_Beta/mplabx-ide-beta7.02-linux-64-bit-installer.bin)
noextract=()
md5sums=('fbe573dabb54120947bbefaa2d8003d4')
build() {
whoami
check() {
whoami
package() {
whoami
chmod +x mplabx-ide-beta7.02-linux-64-bit-installer.bin
mkdir -p /opt
mkdir /opt/microchip
mkdir /opt/microchip/mplabx
./mplabx-ide-beta7.02-linux-64-bit-installer.bin
The console output:
$ makepkg
==> Making package: microchip_mplab-x 7.02-1 (Mon Sep 26 07:42:15 CEST 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found mplabx-ide-beta7.02-linux-64-bit-installer.bin
==> Validating source files with md5sums...
mplabx-ide-beta7.02-linux-64-bit-installer.bin ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
cedric
==> Starting check()...
cedric
==> Entering fakeroot environment...
==> Starting package()...
root
mkdir: cannot create directory `/opt/microchip': Permission denied
==> ERROR: A failure occurred in package().
Aborting...
When I create the directory /opt/microchip (in the real root), the above error changes:
$ su
Password:
[root@cedric mplab-test]# mkdir /opt/microchip
[root@cedric mplab-test]# exit
exit
[cedric@cedric mplab-test]$ makepkg
==> Making package: microchip_mplab-x 7.02-1 (Mon Sep 26 07:45:15 CEST 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found mplabx-ide-beta7.02-linux-64-bit-installer.bin
==> Validating source files with md5sums...
mplabx-ide-beta7.02-linux-64-bit-installer.bin ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
cedric
==> Starting check()...
cedric
==> Entering fakeroot environment...
==> Starting package()...
root
mkdir: cannot create directory `/opt/microchip': File exists
==> ERROR: A failure occurred in package().
Aborting...
What can I do to get around this?
Best regards,
Cedric

Thanks. I have now adjusted the PKGBUILD as such
# This is an example PKGBUILD file. Use this as a start to creating your own,
# and remove these comments. For more information, see 'man PKGBUILD'.
# NOTE: Please fill out the license field for your package! If it is unknown,
# then please put 'unknown'.
# Maintainer: Cedric de Wijs <[email protected]>
pkgname=microchip_mplab-x
pkgver=7.02
pkgrel=1
epoch=
pkgdesc=""
arch=('x86_64')
url="http://www.microchip.com/en_US/family/mplabx/index.html"
license=('unknown')
groups=()
depends=()
makedepends=()
checkdepends=()
optdepends=()
provides=()
conflicts=()
replaces=()
backup=()
options=()
install=
changelog=
source=(http://ww1.microchip.com/downloads/mplab/X_Beta/mplabx-ide-beta7.02-linux-64-bit-installer.bin)
noextract=()
md5sums=('fbe573dabb54120947bbefaa2d8003d4')
build() {
whoami
check() {
whoami
package() {
whoami
chmod +x mplabx-ide-beta7.02-linux-64-bit-installer.bin
install -d "$pkgdir"/opt/microchip/mplabx
./mplabx-ide-beta7.02-linux-64-bit-installer.bin
The directories are no made without problems, but the mplab installer still complains it can't create the directories.
$ makepkg
==> Making package: microchip_mplab-x 7.02-1 (Mon Sep 26 08:04:04 CEST 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found mplabx-ide-beta7.02-linux-64-bit-installer.bin
==> Validating source files with md5sums...
mplabx-ide-beta7.02-linux-64-bit-installer.bin ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
cedric
==> Starting check()...
cedric
==> Entering fakeroot environment...
==> Starting package()...
root
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
==> ERROR: A failure occurred in package().
Aborting...
It looks like makepkg only runs install in the fakeroot. Is there any way a binary installer can be run inside the fakeroot?
Am I going in the right direction, or is there no way to run a binary installer like this?
Are there other binary installers that are run like this?
Best regards,
Cedric
Last edited by cdwijs (2011-09-26 06:32:06)

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

Cannot create temp directory: The system cannot find the path specified

Hello
I am getting Cannot create temp directory when deploying to Oracle AS , can any one help ?
---- Deployment started. ---- Apr 23, 2007 8:20:29 AM
Target platform is Oracle Application Server 10g 10.1.3 (WEBQA01).
Wrote WAR file to C:\ide\jdeveloper\jdev\mywork\Upload\Upload\deploy\fileupload.war
Wrote EAR file to C:\ide\jdeveloper\jdev\mywork\Upload\Upload\deploy\fileupload.ear
Operation failed with error:
Cannot create temp directory: The system cannot find the path specified
Deployment failed
Elapsed time for deployment: 8 seconds
#### Deployment incomplete. #### Apr 23, 2007 8:20:37 AM

In Windows, setting the Environmental Variable sometimes DOES NOT WORK.
The -Djava.io.tmpdir=C:\temp setting must be made in the server properties of the oc4j in order for it to work.
Jae

SelectTransport: creating directory failed: Win32Exception: root of directory to create not found: The system cannot find the path specified. [0x00000003]

USMT is failing with error 71 for all users in a specific office when backing up to a specific share:
COMPUTERNAME\Guest, administrator: No, interactive: Yes, logged on: No, has profile: No
DOMAIN\USERNAME, administrator: Yes, interactive: Yes, logged on: Yes, has profile: Yes
COMPUTERNAME\Administrator, administrator: Yes, interactive: Yes, logged on: No, has profile: Yes
2014-10-31 12:52:37, Status [0x000000] Activity: 'MIGACTIVITY_TRANSPORT_SELECTION'
2014-10-31 12:52:37, Info [0x000000] Processing the settings store
2014-10-31 12:52:37, Error [0x000000] SelectTransport: creating directory \\san.f.q.d.n\share$\username\BACKUP\USERNAME\USMT failed: Win32Exception: root of directory to create not found: The system cannot find the path specified. [0x00000003] class UnBCL::DirectoryInfo *__cdecl UnBCL::Directory::CreateDir(const class UnBCL::String *)[gle=0x00000005]
2014-10-31 12:52:37, Info [0x000000] Failed.[gle=0x00000091]
2014-10-31 12:52:37, Info [0x000000] A Windows Win32 API error occurred
Windows error 3 description: The system cannot find the path specified.[gle=0x00000091]
2014-10-31 12:52:37, Info [0x000000] Windows Error 3 description: The system cannot find the path specified.
2014-10-31 12:52:37, Info [0x000000] USMT Completed at 2014/10/31:12:52:37.861[gle=0x00000091]
2014-10-31 12:52:37, Info [0x000000] Entering MigShutdown method
2014-10-31 12:52:37, Info [0x080000] COutOfProcPluginFactory::FreeSurrogateHost: Shutdown in progress.
2014-10-31 12:52:37, Info [0x0803e5] Not unmapping HKLM\ELAM; it is not mapped
2014-10-31 12:52:37, Info [0x0803e6] Removing mapping for HKLM
2014-10-31 12:52:37, Info [0x0803e7] Successfully unmapped HKLM
2014-10-31 12:52:37, Info [0x0803e6] Removing mapping for HKU
2014-10-31 12:52:37, Info [0x0803e7] Successfully unmapped HKU
2014-10-31 12:52:37, Info [0x080487] Destroying OS analysis service
2014-10-31 12:52:37, Info [0x080488] Destroyed OS analysis service
2014-10-31 12:52:37, Info [0x000000] Leaving MigShutdown method
2014-10-31 12:52:37, Info [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------
2014-10-31 12:52:37, Info [0x000000] * USMT error code 71:
2014-10-31 12:52:37, Info [0x000000] +-----------------------------------------------------------------------------------------
2014-10-31 12:52:37, Info [0x000000] | A Windows Win32 API error occurred
2014-10-31 12:52:37, Info [0x000000] | Windows error 3 description: The system cannot find the path specified.
2014-10-31 12:52:37, Info [0x000000] +-----------------------------------------------------------------------------------------
As the user in question, when I browse \\san.f.q.d.n\share$\username, the BACKUP directory exists, but there are no sub directories.
I manually created the sub directories, USERNAME\USMT - so the full path now exists: \\san.f.q.d.n\share$\username\BACKUP\USERNAME\USMT
I re-ran USMT but the process returned the same error.
If I specify other shares not on san.f.q.d.n but on san1.f.q.d.n or server.f.q.d.n or even workstation.f.q.d.n, it works fine.
Can someone provide guidance on how to troubleshoot this further?

In Windows, setting the Environmental Variable sometimes DOES NOT WORK.
The -Djava.io.tmpdir=C:\temp setting must be made in the server properties of the oc4j in order for it to work.
Jae

[SOLVED] mkfifo: cannot create fifo '': No such file or directory

Hi, I'm trying to get Bar working on bspwm but I'm getting an error whenever I try to load it.
mkfifo: cannot create fifo ‘’: No such file or directory
At first I fiddled with it a bit and it didn't work. I figured I was making some syntax errors or whatever but the example code gives me the same errors.
I've tried to read up on mkfifo but I'm a bit lost now. I hope someone can push me in the right direction. :)
Last edited by Mnk (2014-08-29 16:24:37)

I'm guessing you are running the panel script without the PANEL_FIFO environment variable set, so the script is trying to open an empty file name.
Use the profile script to set the PANEL_FIFO variable, or set it explicitly in the panel script.
If this is not the problem, please provide more information about exactly what you are doing.

Cannot create mysites from powershell: Original XSLT List View Web Part not found

I have a bizarre problem in my SharePoint 2013 farm. This does not occur in my test farm, only in the farm we were going to go live with.
I'm on windows Server 2012, SQLServer 2012 SP1, SharePoint 2013 April CU. 1 appserver/centraladmin server, 2 web servers.
When I log into our mysitehost and click newsfeed, it will create a mysite (even though first it displays "we are sorry there was a problem creating your site")
But from powershell, whether I use $UserProfile.CreatePersonalSite() or New-SPSite, I get the following error:
Original XSLT List View Web Part not found
So far I've only found one other person with this:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2503e42c-e114-4e89-8e00-89fe70f0b154/cannot-create-sharepoint-mysite-programmatically
This is a brand new farm, created with the same scripts I created my test farm with, and same version of SharePoint. Only the service accounts are different. (Farm account has admin on the servers right now since I was setting up profile service).
Some other errors from the same correlation ID that look related:
It can't seem to find the listemplate 101
And something looks wrong with the MySiteDocumentLibrary feature
I have tried the following:
1. run psconfig.exe on each server
2. install-spfeature -AllExistingFeatures
3. looped through the directory under Features and for each called Install-SPFeature $dirname -Force
4. uninstalled and reinstalled MySiteDocumentLibrary feature
5. blew away the whole farm (removed all servers from farm, deleted all databases) and recreated it.
6. tried creating the UPA from the CentralAdmin gui.
The only real difference I can think of between the working farm and non working farm is, I installed the working farm using RTM, then as they came out added the March PU and April CU. For this farm I installed RTM and March and April, and then ran my build
farm script.
I am at a loss. What do I need to do, re-install the binaries? That's all I can think of. What I love is that our test / POC system worked fine, and now 2 weeks before go-live I'm seeing errors on the production servers I've never seen before. Using the
same scripts no less.
Feature Activation: Feature 'Fields' (ID: 'ca7bd552-10b1-4563-85b9-5ed1d39c962a') was activated
Feature Activation: Feature 'CTypes' (ID: '695b6570-a48b-4a8e-8ea5-26ea7fc1d162') was activated
No document templates uploaded for list "$Resources:core,global_onet_solutiongallery_list;" -- none found for list template "100"
Failed to find <ListTemplate> tag corresponding to ID "101", tried both onet.xml for site definition ID "0" language "1033" and global site definition. Operation failed.
No document templates uploaded for list "$Resources:core,stylelibraryList;" -- none found for list template "121".
System.Runtime.InteropServices.COMException: A user may not remove his or her own account from a site collection.<nativehr>0x81020051</nativehr><nativestack></nativestack>, StackTrace: at Microsoft.SharePoint.SPUserCollection.UpdateMembers
Feature Activation: Feature 'MySitePersonalSite' (ID: 'f661430e-c155-438e-a7c6-c68648f1b119') was activated
Feature Activation: Activating Feature 'MySiteDocumentLibrary'
Calling 'FeatureActivated' method of SPFeatureReceiver for Feature 'MySiteDocumentLibrary'
SharePoint Foundation Upgrade MySiteDocumentLibraryFeatureReceiveraj08n INFO Creating new My Documents library
Unknown SPRequest error occurred. More information: 0x80070002
SPRequest.GetMetadataForUrl: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://contoso/personal/cbuchholz/DOCUMENTS ,METADATAFLAGS=59
System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>, StackTrace: at Microsoft.SharePoint.SPWeb.GetObjectForUrl at Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryUtil.GetSPObjectFromUrl ...
<nativehr>0x80070002</nativehr><nativestack></nativestack>There is no Web named "/personal/cbuchholz/DOCUMENTS"
Possible mismatch between the reported error with code = 0x81070504 and message: "There is no Web named "/personal/cbuchholz/DOCUMENTS"." and the returned error with code 0x80070002.
Attemping to add webpart id 0F6072F2-E804-4CFD-837E-BB37332B9D1C to web http://contoso/personal/cbuchholz
Adding XsltListViewWebPart calling SPRequest::CreateListViewPart. Web part id 0F6072F2-E804-4CFD-837E-BB37332B9D1C, web http://contoso/personal/cbuchholz
Feature receiver assembly 'Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c', class 'Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryFeatureReceiver', method 'FeatureActivated' for feature 'e9c0ff81-d821-4771-8b4c-246aa7e5e9eb' threw an exception: System.InvalidOperationException: Original XSLT List View Web Part not found at Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryUtil.ReplaceListViewWebPart
Feature Activation: Threw an exception, attempting to roll back. Feature 'MySiteDocumentLibrary'
Exception in EnsureFeaturesActivatedAtSite: System.InvalidOperationException: Original XSLT List View Web Part not found
Failed to activate site-collection-scoped features for template 'SPSPERS#2' in site collection 'http://contoso/personal/cbuchholz'
Failed to apply template "SPSPERS#2" to web at URL "http://contoso/personal/cbuchholz
I've had other problems in this farm: the bug where when you add Administrators to a Search Service via the Manage Service Applications page, it removes the SPSearchDBAdmin role from the search service process account. That one did not happen in the other farm.
At least other people have that one and I could just use the farm admin instead (still troublng of course).

Ok,
Here is the problem:
When creating a mysite from powershell or script, apparently you can ONLY do this from a wfe (or a server running Microsoft SharePoint Foundation Web Application in services on server).
You CANNOT create mysites from script on your appserver if it is not also a Web Application Server. I confirmed the same is true in my test farm. I guess I was always running most of these scripts on the webserver.
I searched all over and cannot find this documented anywhere.
Who do I contact to have Microsoft document this?
It's Thursday morning, I've been working non stop since Saturday morning so you don't have to :)

LMS 3.2 - Backup-Error -- ERROR(908): Cannot create or back up tar file

Hello again,
with performing backup (LMS 3.2 on Solaris 9) the following errors will arise.
dbbackup.log
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive Apps file : /opt/CSCOpx/backup/manifest/upm/upminfo/datafiles.txt
[Tue Dec 8 08:56:54 2009] Archiving the contents of the following directories into /enbw/backup/files/cw_db_backup/0/upm/filebackup.tar
[Tue Dec 8 08:56:54 2009] /opt/CSCOpx/hum/conf/upm-snmp.properties
/opt/CSCOpx/hum/thresholdscript /opt/CSCOpx/MDC/tomcat/webapps/upm/reports
/opt/CSCOpx/MDC/tomcat/webapps/upm/WEB-INF/classes/com/cisco/nm/upm/properti
es/common/UPM.properties
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_657_658_-718594975:
No such file or directory
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_658_659_1465769167:
No such file or directory
/opt/CSCOpx/bin/tar: Error exit delayed from previous errors [Tue Dec 8 09:07:30 2009] ERROR(908): Cannot create or back up tar file. Backup cancelled. Verify that you have write-access to this directory. [Tue Dec 8 09:07:30 2009] Backup failed: 2009/12/08 09:07:40 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Is seems to be problem related to maximal filesize handling of GNUtar implemented in CW2000.
The problem is with tar'ing HUM-Reports in /opt/CSCOpx/MDC/tomcat/webapps/upm/reports, and with reaching
tarfile-size of 2,9GByte error is thrown.
</exxx/backup/files/cw_db_backup/0/upm># ls -lh
total 6126448
-rw-r-----   1 casuser casusers    2.9G Dec 8 09:07 filebackup.tar
</exxx/backup/files/cw_db_backup/0/upm># ls -al
total 6126452
drwxr-x---   2 casuser casusers     512 Dec 7 14:30 .
drwxr-x--- 11 casuser casusers     512 Dec 7 14:30 ..
-rw-r-----   1 casuser casusers 3135201280 Dec 8 09:07 filebackup.tar
GNUtar-Version
# /opt/CSCOpx/bin/tar --version
tar (GNU tar) 1.13
Copyright (C) 1988, 92,93,94,95,96,97,98, 1999 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by John Gilmore and Jay Fenlason.
Is this a know problem?
Thanks for any thoughts.
Best Regards
Lothar

Hi Joe,
thanks for your feedback.
These files to be tarred aren't there directly after backup stops with error.
It seems that some process stores data about reports in that file and when trying to
pack these reports via tar they are delete by any cleanup method.
Does this help.
P.S. Backup usually takes about more than 1hour

LV 8.2.1 reinstallation error 1301: Cannot create file

Hi,
I was forced to uninstall LV 8.2.1 and reinstall it. When I'm reinstalling LV 8.2.1 I get an error message
Error 1301. Cannot create file ". A directory with the same name already exists. Cancel the install and try installing to a different location.
(Abort, Retry, Ignore).
This error is somehow related to the fact that after uninstalling LV 8.2.1 LabVIEW 8.2 installation directory still remains with some stuff in the user.lib and other folders. I'm always using OpenG packages and I didn't uninstall them so that may be the reason. I also used DataAct class browser with LabVIEW.
The problem is that I cannot uninstall my OpenG packages before I can get my LabVIEW installed again as VI Package Manager reposinsible for installing OpenG packages doesn't work without installed version of LabVIEW. And I cannot get my LabVIEW correctly installed because of this error. I can press ignore and the installation procedes but I don't know whet it didn't do because of the error.
I guess this error is a bug in LV 8.2.1 isntaller so would some of NI application engineers help, please.
For now I press Ignore.
Tomi Maila
Tomi Maila

You will get this error if the installer is trying to install a file that has the same name as a folder at that location. For example lets say the installer has a file called "sample" that should go in LabVIEW\examples folder. Now lets say there was a folder called "LabVIEW\examples\sample". Windows wont let you copy that "sample" file in the same location that contains a "sample" folder. The failure is not an error in the installer.
The problem with the 8.2.1 installer is that it is not telling you what file this failure occurred on. It is trying to, but the string is not formatted correctly and it just says "cannot create file ." The actual file name should be where the "." is.
You can usually tell what file it failed on from the text above the progress bar where it says what file is being copied. The best way to see what failed was to get an installation log file.
Naren Salem
LabVIEW R&D

Cannot create and add a new entry to LDAP

Hi,
I'm pretty new at LDAP and JNDI, i've been trying to create and add a new entry to the directory but somehow it's not working.
here is my code and I would appreciate it if someone can help.
import java.util.Hashtable;
import javax.naming.ldap.*;
import javax.naming.directory.*;
import javax.naming.*;
import javax.net.ssl.*;
import java.io.*;
public class Newuser
     public static void main (String[] args)
          //LDAPEntry myEntry = new LDAPEntry();
          Hashtable<String, String> env = new Hashtable<String, String>(11);
          String adminName = "CN=ldap_admin,o=JNDITutorial,dc=img,dc=org";
          String adminPassword = "secret";
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
          //set security credentials, note using simple cleartext authentication
          env.put(Context.SECURITY_AUTHENTICATION,"simple");
          env.put(Context.SECURITY_PRINCIPAL,adminName);
          env.put(Context.SECURITY_CREDENTIALS,adminPassword);
          //connect to my domain controller
          env.put(Context.PROVIDER_URL, "ldap://localhost:389/o=JNDITutorial,dc=img,dc=org");
               // Create the initial directory context
               //JNDILDAPConnectionManager jndiManager = new JNDILDAPConnectionManagerImpl();
              try{
                   DirContext ctx = new InitialDirContext(env);
                    System.out.println("Connection to LDAP server done" );
                   final String groupDN ="ou=people,o=JNDITutorial,dc=img,dc=org";
                  //DirContext dirCtx = jndiManager.getLDAPDirContext();
                  People people = new People("Thiru","Thiru","Thiru Ganesh","Ramalingam","ou=people","[email protected]");
                  // The Common name must be equal in Attributes common Name
                  ctx.bind("cn=Thiru," + groupDN, people);
                  System.out.println("** Entry added **");
                  //jndiManager.disConnectLDAPConnection(ctx);
              }catch(NamingException exception){
                  System.out.println("**** Error ****");
                  exception.printStackTrace();
                  System.exit(0);
}here is the Object class People that i'm trying to instantiate
public class People implements DirContext {
     public People(String uid,String cn,String givenname,String sn,String ou,String mail) {
    BasicAttributes myAttrs = new BasicAttributes(true); //Basic Attributes
    Attribute objectClass = new BasicAttribute("objectclass"); //Adding Object Classes
    objectClass.add("inetOrgPerson");
    /*objectClass.add("organizationalPerson");
    objectClass.add("person");
    objectClass.add("top");*/
    Attribute ouSet = new BasicAttribute("ou");
    ouSet.add("people");
    ouSet.add(ou);
    myAttrs.put(objectClass);
    myAttrs.put(ouSet);
    myAttrs.put("cn",cn);
    myAttrs.put("sn",sn);
    myAttrs.put("mail",mail);
...the message i keep getting is:
javax.naming.directory.SchemaViolationException: [LDAP: error code 65 - entry has no objectClass attribute]
the thing is that I can create and add a new entry in openLDAP from the console and it works.
and here is how I proceed
I create a text file: new.txt
dn:cn=Hamido Saddo,ou=People,o=JNDITutorial,dc=img,dc=org
cn:Hamido Saddo
mail:[email protected]
telephonenumber:3838393038703
sn:hamdio
objectclass:top
objectclass:person
objectclass:organizationalPerson
objectclass:inetOrgPersonand i use this command to add the entry:
ldapadd -D "cn=ldap_admin,O=JNDITutorial,dc=img,dc=org" -W -f new.txtand everything works, i get no errors.
does anyone has a clue maybe???

You must have an IMAP email account in order to add additional folders on the iPad mail app.
If you go to your email account in the Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom.
If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well.

[SOLVED]C compiler cannot create executables DUE TO MISSING DEV. PACKS

Hi there, I was trying to build "lib32-libpcap" from AUR using yaourt when the gcc(?) reported an error as following:
==> Starting build()...
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... gcc -m32
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
==> ERROR: A failure occurred in build().
Aborting...
The content of the "config.log" file:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --enable-ipv6
## Platform. ##
hostname = mzws
uname -m = x86_64
uname -r = 3.2.8-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/core_perl
## Core tests. ##
configure:1794: checking build system type
configure:1812: result: x86_64-unknown-linux-gnu
configure:1834: checking host system type
configure:1849: result: x86_64-unknown-linux-gnu
configure:1871: checking target system type
configure:1886: result: x86_64-unknown-linux-gnu
configure:2036: checking for gcc
configure:2063: result: gcc -m32
configure:2301: checking for C compiler version
configure:2308: gcc -m32 --version >&5
gcc (GCC) 4.6.2 20120120 (prerelease)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2311: $? = 0
configure:2318: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.6-20120120/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-libstdcxx-time --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --disable-multilib --disable-libssp --enable-checking=release
Thread model: posix
gcc version 4.6.2 20120120 (prerelease) (GCC)
configure:2321: $? = 0
configure:2328: gcc -m32 -V >&5
gcc: error: unrecognized option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:2331: $? = 1
configure:2354: checking for C compiler default output file name
configure:2381: gcc -m32 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu conftest.c >&5
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/libgcc.a when searching for -lgcc
/usr/bin/ld: cannot find -lgcc
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/../../../libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: skipping incompatible /usr/lib/libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: cannot find -lgcc_s
collect2: ld returned 1 exit status
configure:2384: $? = 1
configure:2422: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2429: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_target=x86_64-unknown-linux-gnu
## Output variables. ##
ADDLARCHIVEOBJS=''
ADDLOBJS=''
BT_SRC=''
CAN_SRC=''
CC='gcc -m32'
CFLAGS='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
CPP=''
CPPFLAGS=''
DEFS=''
DYEXT=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
GREP=''
HAVE_LINUX_TPACKET_AUXDATA=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu'
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAN_FILE_FORMATS=''
MAN_MISC_INFO=''
OBJEXT=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PCAP_SUPPORT_BT=''
PCAP_SUPPORT_CAN=''
PCAP_SUPPORT_USB=''
RANLIB=''
SHELL='/bin/sh'
SHLICC2=''
SSRC=''
USB_SRC=''
V_CCOPT='-O'
V_DEFS=''
V_FINDALLDEVS=''
V_INCLS=''
V_LEX=''
V_PCAP=''
V_RPATH_OPT=''
V_SHLIB_CMD=''
V_SHLIB_OPT=''
V_SONAME_OPT=''
V_YACC=''
ac_ct_CC='gcc -m32'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='x86_64-unknown-linux-gnu'
target_alias=''
target_cpu='x86_64'
target_os='linux-gnu'
target_vendor='unknown'
## confdefs.h. ##
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
configure: exit 77
and the makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Am running a up-to-date x64 Arch with [multilib] enabled; perhaps it's a silly mistake I made somewhere but I'm no dev and so cannot figure out what went wrong in the config.log....please help with your kindness and thanks in advance!
Last edited by karbon (2012-03-10 04:28:58)

Thanks for your replies:)
Allan wrote:Are you really up-to-date? gcc-4.6.3 was put in [core] four days ago but you still seem to have 4.6.2.
Well...at least as up-to-date as on March 2nd(when I did last system-wide upgrade); trying to update system tonight to see whether this works.
stronnag wrote:If you have multilib and testing enabled, you also need multilib-testing, otherwise (as I know from bitter experience), you get these hard to track down errors.
Nope I didn't enable [testing]; I've discovered some packages in [multilib], namely gcc-multilib or something similar(with the -multilib subfix) and some of these packages belong to the group "multilib-devel". Is installing these packages a must for compiling 32-bit packages?

Cannot create directory Bonjour

Similar Messages

Maybe you are looking for