Cannot create extended range vlan
hello guys,
Could you help me to fix this issue;
Problem Description
I get this message when I tried to create an extended range vlan.
Switch: 2960
IOS:
12.2.53
spanning-tree extend system-id is configured
VTP mode transparent is configured as well.
These are configured, and work find
2801 TEST2 active
2807 TEST3 active
2857 TEST4 active
3326 test5 active
VTP Status:
#sh vtp status
VTP Version capable : 1 to 3
VTP version running : 1
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP Traps Generation : Disabled
Device ID : 68bd.ab2f.b100
Configuration last modified by 10.231.71.241 at 0-0-00 00:00:00
Feature VLAN:
VTP Operating Mode : Transparent
Maximum VLANs supported locally : 255
Number of existing VLANs : 29
Configuration Revision : 0
MD5 digest : 0xE5 0xED 0xE2 0xB2 0x96 0x21 0x2A 0x24
0xBC 0xAD 0xF5 0x27 0x95 0xF6 0x93 0x0A
ERROS:
SW1(config)#vlan 2856
SW1(config-vlan)#name test1
SW1(config-vlan)#exit
% Failed to create VLANs 2856
VLAN(s) not available in Port Manager.
%Failed to commit extended VLAN(s) changes.
SW1(config)#
thank you for helping me.
Alioune
You need to enable VTP V3 on all the switches. If one of your switch is VTPV1 capable only, it will not able to inter-operate with VTP V3.
Please look at these guidelines for 2960.
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_55_se/configuration/guide/swvtp.html#wp1316856
Cheers,
-amit singh
Similar Messages
-
How to create extended range network using three apple airport extremes?
Hello! The idea is, I want to use Apple routers to create a large range network for a hotel that has 300 FT Hallway. I have tried everything in the airport utility but nothing works. The idea is, in the whole 300 FT hallway, i want to put three apple airport extreams. one in the middle of the hallway which will be connected to the modem, one on the each end of the hallway that will be connected to the middle airport extreme via eithernet or extend network range option from airport utility.
Image shows, what I am trying to achieve.
http://imageshack.us/scaled/landing/35/10e6.jpg
These what I have tried so far. Airport extreme is refered here as "airport"
1. Connect Airport 1 to modem, then on Airport 2 use extend network feature to extend the range of airport 1 network. This did not work. Airport 2 keeps on blinking yellow.
2. Did same thing as step 1 but also tried it using ethernet cable going from Airport 1 in to Airport 2's ethernet inbound port.
3. Connected modem to switch, from swith one ethernet cable goes in to Airport 1 and one cable from SWITCH goes in to the airport 2's ethernet port.
Only thing that works is, if I connect ONLY ONE airport to the modem or the switch. I am not able to use two airport extremes together.
Please advise what I can do using these or other apple products to have extended wifi coverage in the entire hallway.
I, however do need to use three extremes as one is not enough to cover the area.
Thank you.
Hopefully some one can help me and correct me where I am doing something wrong.
Thanks.Exactly what model extreme are you using??
What device is being used as setup with airport utility?
1. Connect Airport 1 to modem, then on Airport 2 use extend network feature to extend the range of airport 1 network. This did not work. Airport 2 keeps on blinking yellow.
Amber blinking just means something needs adjusting.. it should still show up in the utility and you can find out what the extreme is complaining about. If not start over.. it is absolutely crucial you factory reset and start over.. the extreme must present as a new wireless device in wifi and then you can setup to extend the existing wireless.
2. Did same thing as step 1 but also tried it using ethernet cable going from Airport 1 in to Airport 2's ethernet inbound port.
This is a much better arrangement.. The Extreme plugged into the Modem.. what mode is it in? It must create a wireless network.. make sure the network name is short.. no spaces and pure alphanumeric.
The extreme plugged into to give better range.. must be in bridge mode.
It must create a wireless network of the exact same name.. exact same security settings and same password.
Follow the instructions here if you do not follow.
http://support.apple.com/kb/HT4260
3. Connected modem to switch, from swith one ethernet cable goes in to Airport 1 and one cable from SWITCH goes in to the airport 2's ethernet port.
This is the same configuration as 2. There is no difference where you put the switch.
Only thing that works is, if I connect ONLY ONE airport to the modem or the switch. I am not able to use two airport extremes together.
Setup according to the apple instructions for roaming network.. it will work.
If it fails give us more info.. what model AE. etc.
Also give us the IP address and screenshot of each units setup for wireless. -
Unable to create extended vlan
Dear All,
Is there anyway to create extended vlan(from 1006 to 1010) on my cisco 7604? These are existing customer vlan which I planned to move to this 7604 but unfortunately cant. I believe only FDDI and Token ring vlan unable to remove. Expert please advice.
PBR#sh ver
Cisco Internetwork Operating System Software
IOS (tm) s3223_rp Software (s3223_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF17, R
ELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by cisco Systems, Inc.
Compiled Fri 25-Sep-09 06:10 by ccai
Image text-base: 0x40101040, data-base: 0x42A509B0
ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
BOOTLDR: s3223_rp Software (s3223_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF17, R
ELEASE SOFTWARE (fc1)
PBR uptime is 11 weeks, 1 day, 21 hours, 33 minutes
Time since PBR switched to active is 11 weeks, 1 day, 21 hours, 33 min
utes
System returned to ROM by power cycle (SP by power on)
System image file is "sup-bootdisk:s3223-ipservices_wan-mz.122-18.SXF17.bin"
cisco CISCO7604 (R7000) processor (revision 2.0) with 458752K/65536K bytes of me
mory.
Processor board ID FOX1340GBXD
R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
18 Virtual Ethernet/IEEE 802.3 interfaces
57 Gigabit Ethernet/IEEE 802.3 interfaces
1915K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
PBR#
PBR#sh vlan
VLAN Name Status Ports
1 default active Gi3/14, Gi3/44
2 HPeP_Terrestrial_Side active
3 HPeP_Satellite_Side active Gi3/23, Gi3/24
5 Management active Gi3/1, Gi3/2, Gi3/3, Gi3/4
Gi3/5, Gi3/6, Gi3/7, Gi3/8
Gi3/9, Gi3/12, Gi3/13, Gi3/15
Gi3/31, Gi3/35
6 Customer_Traffic active Gi3/11, Gi3/37, Gi3/38
8 GCU active Gi3/33, Gi3/34
20 SIME active
45 Petrofac active
51 140.176.51.0/24-client-vlan active
101 Internet_Connection active Gi1/1, Gi1/2, Gi3/16, Gi3/26
190 BUK_FVSB active
201 Customer_VLAN_201 active
202 GITNS2A active
203 Internet_Connection_New active Gi3/17, Gi3/48
204 Sports_Toto_Malaysia active
205 XOM_EXXONMOBIL active
206 PCSB active
990 Unused_Ports active Gi1/3, Gi1/4, Gi1/5, Gi1/6
Gi1/7, Gi1/8, Gi1/9
999 RSPAN active
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
6 enet 100006 1500 - - - - - 0 0
8 enet 100008 1500 - - - - - 0 0
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
20 enet 100020 1500 - - - - - 0 0
45 enet 100045 1500 - - - - - 0 0
51 enet 100051 1500 - - - - - 0 0
101 enet 100101 1500 - - - - - 0 0
190 enet 100190 1500 - - - - - 0 0
201 enet 100201 1476 - - - - - 0 0
202 enet 100202 1500 - - - - - 0 0
203 enet 100203 1500 - - - - - 0 0
204 enet 100204 1500 - - - - - 0 0
205 enet 100205 1500 - - - - - 0 0
206 enet 100206 1500 - - - - - 0 0
990 enet 100990 1500 - - - - - 0 0
999 enet 100999 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0
Remote SPAN VLANs
999
Primary Secondary Type Ports
PBR#
PBR# sh vlan internal usage
VLAN Usage
1006 online diag vlan0
1007 online diag vlan1
1008 online diag vlan2
1009 online diag vlan3
1010 online diag vlan4
1011 online diag vlan5
1012 PM vlan process (trunk tagging)
1013 Control Plane Protection
1014 L3 multicast partial shortcuts for VPN 0
1015 Egress internal vlan
1016 Multicast VPN 0 QOS vlan
1017 GigabitEthernet3/27
1018 GigabitEthernet3/47
1029 IPv6 Multicast Egress multicast
1030 L3 multicast partial shortcuts for VPN 1
1031 Multicast VPN 1 QOS vlan
1032 L3 multicast partial shortcuts for VPN 3
1033 Multicast VPN 3 QOS vlan
1034 L3 multicast partial shortcuts for VPN 5
1035 Multicast VPN 5 QOS vlan
1036 L3 multicast partial shortcuts for VPN 6
1037 Multicast VPN 6 QOS vlan
PBR#As Cisco Freak said, those vlans are being allocated for internal use
Layer 3 LAN ports, WAN interfaces and subinterfaces, and some software features use internal VLANs in the extended range. You cannot use an extended range VLAN that has been allocated for internal use.
In order to use them, you will need to use a descending vlan allocation option, to start allocation from vlan 4094 and down, to do this you will need to apply the command:
vlan internal allocation policy descending
And then reboot your switch, so the internal vlans get reallocated
For more info refer to this configuration guide:
http://www.cisco.com/c/en/us/td/docs/routers/7600/ios/15S/configuration/guide/7600_15_0s_book/vlans.html#pgfId-1038695 -
How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
Thank you for any help you can provide.
ArupThis is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
In the meantime..
Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
ie
You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
Wireless repeater is never particularly reliable in my experience. I would avoid it if possible. -
Cannot create or replace : The specified extended attribute name was invalid.
New problem arrived today. Trying to copy a file from 10.6 server with an XP (SP3) client. I get this error:
Cannot create or replace (file name here): The specified extended attribute name was invalid.
The contents of the file can be copied, but not the folder. Other files can be copied. There are no funny characters. The name is not too long. I propogated the permissions on the share and that had no affect. The problem exists on three different XP systems. Can't find extended properties that could be causeing a problem. Any ideas?Nikon just released a Firmware update today for the D750
-
How to create number ranges with "OK60" transaction or any other.
Hello,
I need to create a new number range to asigne to a document type , using transaction OK60 ( the error says this transaction).
but I only can display with this transaction, and I would like to update.
Is there any other transaction to do this , or is there any way to do this with this transaction OK60?
Thank you very much.
Kind regards
OlgaHi,
OK60 indeed is used for creating number ranges for FI/CO earmarked funds transactions. You should press on 'Pencil' button and create an interval. If for some reasons, you cannot do this via this transaction, try using SNRO transaction, with IRW_BELEG parameter. If this also fails, then apply to BASIS team to check your authorizations.
Regards,
Eli -
CSI: update_item_instance issues while creating extended attributes
Hello,
For our customer's data conversion, installed base instances have already been created, there is only need to create extended attributes.
Issues I have encountered are:
- Whenever an error is encountered in the API call, all following records are rejected with the same error (even the same instance ID/primary key/attribute ID) as the first error record.
- Extended attributes are randomly entered in the wrong fields (as if one field had gone missing and the others had been updated)
- Date formats have been changed from DD/MM/YYYY to DD-MON-YYYY when consulting from Installed Base (but this happened only once)
Other information: There are 14 extended attributes to be added for each item instance, I removed some of the attributes to make the code more readable.
I followed the metalink note that shows the implementation method for this API and only added the recursive elements that we needed for the 14 attributes + functions to retrieve item_id and such.
The "message()" function replaces is defined as FND_FILE.PUT_LINE(which =>fnd_file.log,buff => p_msg);
PROCEDURE main (errbuf OUT VARCHAR2
,retcode OUT NUMBER
IS
vl_status BOOLEAN;
vl_item_id NUMBER;
vl_instance_id NUMBER;
v_count NUMBER;
v_err_rec CSI_DATASTRUCTURES_PUB.TRANSACTION_ERROR_REC;
v_trx_id number ;
v_ret varchar2(240);
v_msg_count number;
v_msg_data varchar2(2000);
v_date date;
t_msg_dummy NUMBER;
t_output VARCHAR2(2000);
vl_attribute_id NUMBER;
v_inst_rec csi_datastructures_pub.instance_rec;
v_ext_attr csi_datastructures_pub.extend_attrib_values_tbl;
v_party_tbl csi_datastructures_pub.party_tbl;
v_account_tbl csi_datastructures_pub.party_account_tbl;
v_pr_tbl csi_datastructures_pub.pricing_attribs_tbl;
v_org_as s_tbl csi_datastructures_pub.organization_units_tbl;
v_asset_as s_tbl csi_datastructures_pub.instance_asset_tbl;
v_trx csi_datastructures_pub.transaction_rec;
v_inst_id_lst csi_datastructures_pub.id_tbl;
BEGIN
APPS.FND_GLOBAL.Apps_Initialize(FND_PROFILE.value('user_id')
,FND_PROFILE.value('resp_id')
,FND_PROFILE.value('resp_appl_id'));
IF cur_iea_attributes%ISOPEN
THEN
CLOSE cur_iea_attributes;
END IF;
IF get_trx_id
THEN
message('Transaction ID '||to_char(gv_trx_id));
FOR v_cur_iea_attributes IN cur_iea_attributes
LOOP
v_count:=0; -- Initialisation du compteur du ligne. Attention, le nb de lignes dans interface = 14 x nb lignes dans stg
IF check_unique_serial(v_cur_iea_attributes.numero_serie)
-- Recuperation de l'item ID
THEN
get_item_id(p_serial_number => v_cur_iea_attributes.numero_serie
,p_item_id => vl_item_id
,p_status => vl_status
message('Resultat get_item_id: '||to_char(vl_item_id));
get_instance_id(p_item_id => vl_item_id
,p_serial_number => v_cur_iea_attributes.numero_serie
,p_instance_id => vl_instance_id
,p_status => vl_status
IF vl_status
THEN
v_trx.TRANSACTION_DATE:=trunc(SYSDATE);
v_trx.SOURCE_TRANSACTION_DATE:=trunc(SYSDATE);
v_trx.TRANSACTION_TYPE_ID:=gv_trx_id;
message('Entrance v_count'||to_char(v_count));
v_inst_rec.instance_id:=vl_instance_id;
v_inst_rec.object_version_number := 1;
IF v_cur_iea_attributes.IAE_GUARANTEE_END_DATE IS NOT NULL
THEN
v_count:=v_count+1;
v_ext_attr(v_count).instance_id := vl_instance_id;
message('v_ext_attr(v_count).instance_id: '||to_char(v_ext_attr(v_count).instance_id));
message('vl_instance_id: '||to_char(vl_instance_id));
get_attribute_id(p_attribute_code =>'GUARANTEE_END_DATE'
,p_attribute_id => vl_attribute_id);
message('vl_attribute_id: '||to_char(vl_attribute_id));
v_ext_attr(v_count).attribute_id := vl_attribute_id;
v_ext_attr(v_count).attribute_value := v_cur_iea_attributes.IAE_GUARANTEE_END_DATE ;
message('v_cur_iea_attributes.IAE_GUARANTEE_END_DATE: '||v_cur_iea_attributes.IAE_GUARANTEE_END_DATE);
message('');
END IF;
IF v_cur_iea_attributes.IAE_LAST_CTRL_DATE IS NOT NULL
THEN
v_count:=v_count+1;
message('v_count'||to_char(v_count));
-- Les 6 champs obligatoires a remplir pour un update
v_ext_attr(v_count).instance_id :=vl_instance_id;
get_attribute_id(p_attribute_code =>'LAST_CTRL_DATE'
,p_attribute_id => vl_attribute_id);
v_ext_attr(v_count).attribute_id := vl_attribute_id;
v_ext_attr(v_count).attribute_value := v_cur_iea_attributes.IAE_LAST_CTRL_DATE ;
END IF;
CSI_ITEM_INSTANCE_PUB.update_item_instance
p_api_version => 1
,p_commit => fnd_api.g_false
,p_init_msg_list => fnd_api.g_true
,p_validation_level => fnd_api.g_valid_level_full
,p_instance_rec => v_inst_rec
,p_ext_attrib_values_tbl => v_ext_attr
,p_party_tbl => v_party_tbl
,p_account_tbl => v_account_tbl
,p_pricing_attrib_tbl => v_pr_tbl
,p_org_assignments_tbl => v_org_ass_tbl
,p_asset_assignment_tbl => v_asset_ass_tbl
,p_txn_rec => v_trx
,x_instance_id_lst => v_inst_id_lst
,x_return_status => v_ret
,x_msg_count => v_msg_count
,x_msg_data => v_msg_data
-- Output the results
if v_msg_count > 0
then
for j in 1 .. v_msg_count
loop
fnd_msg_pub.get ( j , FND_API.G_FALSE , v_msg_data , t_msg_dummy );
t_output := ( 'Msg' || To_Char ( j ) || ': ' || v_msg_data );
message( SubStr ( t_output , 1 , 255 ) );
end loop;
end if;
ELSE
message('Update not performed for '||v_cur_iea_attributes.numero_serie||' and '||vl_item_id);
END IF;
ELSE
message('Erreur sur '||v_cur_iea_attributes.numero_serie);
END IF;
commit;
message('Commit done for update loop');
END LOOP;
ELSE
message('No Transaction ID - EOP');
END IF;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
message('Error in main program, rolling back');
END main;
Thanks!Todd
The issue seems to because this:
x_instance_rec.inventory_item_id := ib_rec3.inventory_item_id;
You are selecting the item id from your staging table. But the serial number in the csi_item_instances is associated with the instance is a different item id than ib_rec3.inventory_item_id. Hence this error. You cannot change the item in the IB once the instance is created.
You have two choices: comment this out or change the inventory_item_id in staging table to match with the csi_item_instances.
Also a lot depends on what is your serial number uniqueness. If you are using the same serial number for two different items (uniqueness with item_Id) you need to be careful which one you are picking (based on serial number).
Thanks
Nagamohan -
ABAP Internal table cannot be extended dump
Hi,
I am getting the error abap internal table cannot be extended dump for FI program.
If I make use of Hashed table instead of Standard internal table,will it solve the problem.Will the hashed table able to hold more data.
RgdsHi ,
Can you tell me which table you have used for reference to create internal table .
can you show the code for creating internal table .
Problem can be if you have used include structure of any another table and that table have size category such that it can store only that much values which you have set for creating that SAP table .
Regards
Deepak.
Edited by: Deepak Dhamat on Aug 8, 2011 11:18 AM -
Can create view, but cannot create table / materialized view: Xpath is null
Hi all,
We recently moved some XML documents into the database in an XMLType column and want to query the data. I've been writing some queries and turning them into materialized views. I got to one query, and something really strange is happening. My query returns the expected results, but I am getting an error when I try to create a materialized view out of it. Even stranger, I can create a view out of it, and I can manually insert its data into an existing table, but I cannot create a materialized view out of it and I cannot create a table out of it. Here is a brief summary, please let me know if anyone has suggestions.
Issuing the following commands fails in SQLDeveloper
-- Creating a materialized view out of the query fails:
create materialized view element REFRESH COMPLETE ON DEMAND as [query];
Error at Command Line:1 Column:1 SQL Error: ORA-31063: XPath compilation failed: Xpath is null.
-- Creating a table out of the query with the following shortcut fails:
create table element as [query];
Error at Command Line:1 Column:1 SQL Error: ORA-31063: XPath compilation failed: Xpath is null.
Issuing the following commands in SQLDeveloper works fine:
-- Creating a view out of the query works:
create or replace view element as [query];
-- Creating a blank table from the query and then inserting data works:
create table element as select * from [query] where 1 = 2;
insert into element select * from [query];
Here is a simplified version of the query...
I have changed the names around, and cut the query down so maybe it will be a little easier to understand. I did confirm that this query is also having the same symptoms described above. Since I changed the names, executing the query returns no results. However creating a materialized view out of the query still fails with the 'Xpath is null' error.
create materialized view element REFRESH COMPLETE ON DEMAND as
select
m.resource_id,
xml.*
from metadata_sources m,
xmltable(
'for $i in /metadata/app//*[(self::elem1 or self::elem2) and (parent::form or parent::subform)]
let $formName := if($i/parent::subform) then $i/../../@name else $i/../@name
let $subformName := if($i/parent::subform) then $i/../@name else ""
return <data
appId="{$i/ancestor::app[1]/idField}"
formName="{$formName}"
subformName="{$subformName}"
elemName="{$i/@name}"></data>' passing m.xml_content
columns
app_id NUMBER path '@appId',
form_name VARCHAR2(50 char) path '@formName',
subform_name VARCHAR2(50 char) path '@subformName',
elem_name VARCHAR2(50 char) path '@elemName'
) xml;
Edited by: user11949534 on Feb 22, 2013 1:55 PMAs far as creating a structured index, I was under the impression that I would need to then register an XSD. No, you can use it without an XML schema.
How about a regular relational view, with an underlying xml index?
That way you also eliminate the need for an explicit refresh step as you would then be querying real-time data, as if it were relational data.
For example :
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
SQL> create table tmp_xml of xmltype ;
Table created.
SQL> insert into tmp_xml values (
2 xmlparse(document '<root><item id="1">ABC</item><item id="2">DEF</item></root>')
3 ) ;
1 row created.
SQL> insert into tmp_xml values (
2 xmlparse(document '<root><item id="3">GHI</item><item id="4">JKL</item></root>')
3 ) ;
1 row created.
SQL> create or replace view tmp_xml_v as
2 select x.item_id, x.item_val
3 from tmp_xml
4 , xmltable(
5 '/root/item' passing object_value
6 columns item_id number path '@id'
7 , item_val varchar2(3) path '.'
8 ) x
9 ;
View created.
SQL> create index tmp_xml_sxi on tmp_xml (object_value)
2 indextype is xdb.xmlindex
3 parameters (q'#
4 XMLTABLE tmp_xml_xtb '/root/item'
5 COLUMNS item_id number path '@id'
6 , item_val varchar2(3) path '.' #'
7 ) ;
Index created.
SQL> exec dbms_stats.gather_table_stats(user, 'TMP_XML');
PL/SQL procedure successfully completed.
SQL> set autotrace on explain
SQL> set lines 200
SQL> select * from tmp_xml_v ;
ITEM_ID ITE
3 GHI
4 JKL
1 ABC
2 DEF
Execution Plan
Plan hash value: 4168126828
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 4 | 164 | 3 (0)| 00:00:01 |
| 1 | NESTED LOOPS | | | | | |
| 2 | NESTED LOOPS | | 4 | 164 | 3 (0)| 00:00:01 |
| 3 | INDEX FULL SCAN | SYS_C009273 | 2 | 34 | 1 (0)| 00:00:01 |
|* 4 | INDEX RANGE SCAN | SYS30366_30367_OID_IDX | 2 | | 0 (0)| 00:00:01 |
| 5 | TABLE ACCESS BY INDEX ROWID| TMP_XML_XTB | 2 | 48 | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
4 - access("TMP_XML"."SYS_NC_OID$"="SYS_SXI_0"."OID") -
Error #1056: Cannot create property __id0_ on ModuleSwf
I have a document class for a SWF. This SWF compiles and runs fine. When I load it inside another SWF, I get this:
ReferenceError: Error #1056: Cannot create property __id0_ on ModuleSwf.
at flash.display::Sprite/constructChildren()
at flash.display::Sprite()
at flash.display::MovieClip()
at ModuleSwf()
ModuleSwf is the document class of the loaded SWF. What is causing this?ReferenceError: Error #1056: Cannot create property __id0_ on ModuleSwf.
at flash.display::Sprite/constructChildren()
at flash.display::Sprite()
at flash.display::MovieClip()
at ModuleSwf()[C:\Users\me\Projects\MyProject\Production\Assembly\classes\ModuleSwf.as:17]
package
import flash.display.DisplayObject;
import flash.display.MovieClip;
import flash.events.Event;
public class ModuleSwf extends MovieClip
{ // This is line 17
public function ModuleSwf()
if (this != root)
stop();
addEventListener(Event.ADDED_TO_STAGE, addedToStageHandler, false, 0, true);
addEventListener(Event.REMOVED_FROM_STAGE, removedFromStageHandler, false, 0, true); -
Cannot create windows driver project
Hello,
I'm using Visual Studio 2013 Professional and I'm still in the trial period.
I'm attempting to create a windows driver project, however it's not available in my new project (File -> New -> Project) menu: http://imgur.com/Bk4afkI
I also have installed WDK 8.0 and the 8.1 update.
I can see the "Driver" drop-down menu: http://imgur.com/ovYBuHj
Any help is appreciated.
Cheers,
BenHi,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I suggest opening a thread on Windows Hardware WDK and Driver Developmentforum like this thread with the same issue:
http://social.msdn.microsoft.com/Forums/en-US/c2e6cee1-cf25-4be8-96ab-2a61dae13e7d/cannot-create-device-driver-project-in-vs2013-professional?forum=wdk for better support.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
ERROR: The network you selected cannot be extended
I just bought a new Airport Extreme duel-mode router, and I want to use it to extend my network. I go to the wireless settings, and choose to "Extend A Network" then I choose the network that I want to extend. The problem is that when I selected the network I get an error "The Network You Chose Cannot Be Extended." There are some other networks (open and closed) around me, so I tried to extend one of those and I got the same error every time. The part that is really odd to me is that I already have a airport express extending that same network without any problem. Any Ideas?
So there is no way of using the new Airport Extreme on a wireless network unless that network was created by another Airport Extreme? My goal here is just to use the Airport Extreme with my external HD to backup my laptops using Time Machine. For this to be effective the Airport Extreme needs to be on the same network through which I get internet... or else it is pointless (I would have to switch to an internet-less network to do the backups) Is there any way I can do this?
-
I am having issues today with my Adobe Lightroom 5.6 today that was working fine yesterday except for te files from one of my cameras showed up on import but wouldn't download, today I'm getting the message "Lightroom cannot start because it cannot create files in the temporary file location /var/folders/jv/2bct456j0yg4ys681fxk9zq00000gn/T " don't know what has happended in 24 hrs except I did check my permissions on my main directory to ensure that I had extended permissions to all the folders contained within my main drive on my IMac running OSX 10.10
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
Yet another ALERT: Cannot create class in system package
I've searched on the forums and seen several postings and none that really explained a solution, just the initial poster replying they fixed the problem. I am new to J2ME and java in general, I'm going off a book and my first test worked fine but this one gives me the the ALERT: Cannot create class in system package, when I select the GO command. The error occurs in the commandAction method where command == go trying to create an alert message. I am using MIDP 2.0 and as I stated new to this whole thing so a detail response would be greatly appreciated and what I need to do to resolve this for now and the future.
Source code for TextBoxTest.java :
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
public class TextBoxTest extends MIDlet implements CommandListener
private TextBox textBox;
private Alert alert;
private Command quit;
private Command go;
public TextBoxTest()
// Setup the UI
textBox = new TextBox("Enter Name", "", 20, TextField.ANY);
go = new Command("Go", Command.SCREEN, 1);
quit = new Command("Quit", Command.EXIT, 2);
textBox.addCommand(go);
textBox.addCommand(quit);
textBox.setCommandListener(this);
protected void startApp() throws MIDletStateChangeException
Display.getDisplay(this).setCurrent(textBox);
protected void pauseApp()
protected void destroyApp(boolean unconditional)
throws MIDletStateChangeException
public void commandAction(Command command, Displayable displayable)
try
if (command == quit)
destroyApp(true);
notifyDestroyed();
if (command == go)
alert = new Alert("", "Greetings " + textBox.getString(), null,
AlertType.CONFIRMATION);
Display.getDisplay(this).setCurrent(alert);
catch (MIDletStateChangeException me)
System.out.println(me + " caught.");
}Ok so my problem isn't with the code it's with the build order. I guess I needed to state that I was following a book and trying to compile and preverify through command line and not using the toolkit or an IDE. So if I use NetBeans 5.0 or the Wireless Toolkit 2.5 I can compile fine.
So my new question is, can someone show me the steps to build through command line? This is MIDP 2.0. -
I cannot create a folder on USB flash driver that was format in Windows
I have a USB flash drive that was format and use for my Windows PC.
When I used the USB flash drive on my Macbook, I can read the file but cannot create folder.
Is that the IOS restriction?
Thanks for replying.Click on the drive, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it.
(82812)
Maybe you are looking for
-
Transfer old Apple ID purchase info to New Apple ID for iCloud purposes
Transfer old Apple ID purchase info to New Apple ID for iCloud purposes I currently have an apple ID that i have used for many years of ABC. This will hold all the apps and songs etc that i have purchased over the years. So i can currently download
-
Problems with "Startup Disk Memory"
I'm having issues with hard drive storage. My spotify account is telling me it can't play music because my hard drive is full. Applications won't run because my "startup disk space is full." I can't download ANYTHING because there is no space. Before
-
How to include bcc function in thunderbird mail?
I want to send e-mails to multiple recipients without revealing their e-mail addresses to each other. How can I do that with Thunderbird mail?
-
My hard drive is filling up on its own.
Hello friends, I was surpised to see a message saying that I had ran out of disc space. Yesterday I had 20 gigs of space free on my MacBook Pro running Lion, but somehow within the day it disappeared. I cleared the cache from Safari and Chrome, and r
-
Excluding Weekend dates from Select
Hi all, I have a select statement that returns the average number of days a job stays at a particular status. What I want to do is to exclude weekend dates from the calculation. I am using oracle 10.. My select statement looks like this when I look f