Cannot create Hyper-V external virtual switch Server 2012 R2

Hi,
I am unable to create an external virtual switch on server 2012 R2. I have two Broadcom NICS bridged on a DC fully functional now. I can install Hyper-V but the option is grayed out to create an external switch. I try binding it to the
network bridge, connecting my two NICS and it makes no difference.
Am I correct in assuming that I cannot use Hyper-V on this server if the two NICS are bridged?

try command "New-VMSwitch" from Powershell to get more information
Windows 2012 & Hyper-V: Converged Network and QoS
Hyper-V Virtual Switch 101: How to create and use Virtual Switches to connect Virtual Machines to Network
Have a nice day !!!

Similar Messages

Hyper-V Network Virtual switches

Hi,
Good Day!
We have some doubts on Hyper-V Network Virtual Switches:
There are two physical NICs on a Hyper-V Host. One is connected to the public and other connects the internal VM Network. We create two virtual switches; "CustomerNetwork" and "PublicNetwork". "CustomerNetwork" has 192.168.x.x
series IP Address and "PublicNetwork" has a public IP Address.
We have also setup a software router VM with two virtual NICs. One vNIC connects to "CustomerNetwork" and other one connects to "PublicNetwork". We assign an IP address to the vNIC connected to "CustomerNetwork". The IP Address
assigned is 192.168.2.99.
Confusion here is that we don't know which IP Address we should assign to the VNIC of router VM which is connected to "PublicNetwork". We have only one public IP Address. Shall we assign public IP Address to the VNIC of Router VM or the "PublicNetwork"
virtual switch or we should remove the public IP Address from the virtual switch?
Thank you for your time for clarifying our doubts! As always, appreciate your help!
Thank You,
Aurther L

On your router VM , Public IP should be assigned to Public network . Beaaware you are only allowed one external switch per hyper V host. Alternatively Create two VNic from from Private network, Assign public IP to one and local IP to another
assuming you have internet connection on local network.
hope this helps
thanks
mumtaz

Windows 8.1 crashes after an extern virtual switch is added

Hello, to get connected from a virtual machine in hyper v I must add an external virtual Switch.
If I do so, after 2 or 3 minutes I get a blue Screen with the message:
Unexpected_kernel_mode_trap.
I have changed the Driver for the Network Card from Intel drive (Intel pro Network Card) to the drive of Microsoft for this Network Card.
I have made 3 Trials with different Drivers for the Network Card.
But allways after some minutes I get the blue Screen mit the message: Unexpected_kernel_mode_trap.
In any case I have to restore the System from a backup, because it is demaged.
Thank you for any help.
Rowe10

Hi，
According to your description, it seems to be hyper v issue. So I suggest that you can post it in technet forum:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creating System Restore Points in Windows Server 2012

Searching for "Create a restore point" on Windows Server 2012, brings up a link that when clicked takes you to System Properties. Once there, there is no System Protection tab or option to create a system restore point. Windows Server Backup
is installed and functioning.
Is this feature available in Windows Server 2012? Was it replaced with Shadow Copies for Shared Folders?
Thanks for any insight you can provide.

HI,
To create a system restore point, run msconfig.exe, that will launch a UI, click the tools tab, select system restore, that should invoke a UI which asks if you want to restore to an earlier version or do you want to create a new restore point. I clicked
"create a new restore point" The problem that I ran into is that when I click that button is I receive the error: can't find "C:\Windows\System32\rstrui.exe". That's the .exe which supports the "Create / restore point' processes. I
posted a question about the missing .exe on the windows > windows 8.1 > Repair and recovery forum and was told to post it here. :>) The subject title of that post is "rstrui.exe Create a system restore point on windows server 8 Standard".
That post documents the steps that I followed trying to create a system restore point. (FYI: I'm not trying to backup any drives. I know what a system restore point is and what backup is. They are two different animals). I want to create a restore
point prior in order to prep for installing an App. So, If a problem occurs; the registry keys and app files can be backed out to some extent. BTW: Create system restore point on windows 8.1does work perfectly well, there's a different UI. I just didn't
know where to post the initial problem.regards,Steve

Hyper-V Gen 2 Windows Server 2012 R2 VM cannot define static IP address

Hi,
I have setup a physical server with Windows Server 2012 R2. It has only the Hyper-V role installed. The physical server has two NICs that I have teamed with Hyper-V port as the load balancer. I have created 1 VM on this Hyper-V server that is a
Generation 2 VM running Windows Server 2012 R2. It has one NIC in the guest OS that is connected to the Hyper-V switch.
Now the Guest OS works fine and network connectivity is great when using DHCP but when I configure a static IP address in the Guest OS all network connectivity is lost even with correct IP configuration. Is this something to do with a Gen 2 VM?
A little more background - We have another Hyper-V server running Windows Server 2012 R2 with the same NIC teaming in the Host OS, on this Hyper-V there is a GEN 1 Windows Server 2012 R2 that has a static IP configured which is working normally.
Any help is appreciated.

I have resolved the issue. It appeared the hard IP phones were using the same IP range that I was attempting to use so of course the VM could not use the IP Address. Silly mistake.
Elliot, I suggest you mark as Helpful and Answer any responses above that were helpful to you in getting this issue resolved. This is how the forums work.
For example, if a response mentioned "VM generation has no effect on the vNIC." and that pointed you in the direction of troubleshooting networking instead of wasting your time looking into VM generations, that may be considered "Helpful"
If a response mentioned "Make sure you're using valid IPv4 settings" and indeed you ended up having invalid IP settings such as a duplicate IP, this may be considered "Answer"
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Hyper-v Role in Windows Server 2012 foundation and Essentials

Hello,
I have seen that the two low cost version of Windows Server 2012 essential and Foundation) will not support hyper-v. Can you please tell me what it means exactly :
Can you please tell me what is possible :
-The server can not be installed as a hyper-v guest (probably yes)
-The hyper-v role can not be installed on the server (so I have to rely on vmware)?
- Hyper-v role can be installed but there is no free license included with the server.
Thank you
Marc

I suppose then, you would have to install Windows 8 and Hyper-V as your guest or core.
Then run your Server 2012 Foundation under Win8. which has 512GB Memory Limit.
It seems asinine that you cannot install this role on Foundation, but seemingly you could work around it with Win8. (Or Sun Virtual Box (free) (or VmWare(Free).
So load up a dozen Win8Pro virutal sessions on that Win8 VirtualBox with up to 512GB Memory and Create your own Ghetto Remote Desktop Server with Foundation and Windows 8. ;)
What good is it if your can't run Hyper-V and Remote desktop services? Those are the two apps small business need most. But Microsoft strips it out, calls it a DEAL (Essentials and Foundation) , yet if you want the good stuff, you're gonna
have to buy Server 2012 Standard anyhow, + the CALs.
So you are hooked into this "deal" by Microsoft Special Offer. Its special alright, because you get to buy it twice. The stripped down version that come with your server, then the full version when you discover Foundatoin and Essentials gives
you AD, and thats it. Nothing Else. No "deal"
Remember:
All you get with Foundation or Essentials is AD and Group Policy.
You cannot load RDP on Foundation or Essentials
You cannot load Exchange on a DC, or Foundation or Essentials
You cannot load Exchange and RDP on the same box.
You cannot have Remote Web Apps if you load RDP on your DC.
You cannot win with Microsoft. No worthwhile "deal" has ever come out of the city of Redmond.
The internet is a one-way money pipeline to Microsoft.
Its three times the work, three times the cost and requires three servers licenses to do with 2012, what you could do with one 2008R2 license.
Might as well purchase 2 Server 2013 Standard Editions if you want:
1.) Active Directory
2.) Remote Desktop and Remote Apps
3.) Your own Exchange Server
You are better off installing a NAS if all you need is a file server.
Why bother with Foundation or Essentials? Its a "Gimmick-ware"

Adding Hyper-V features to Windows Server 2012

I have already set up a virtual machine with Windows server 2012, when I try to add Hyper-V features it prompts error:
Hyper-V cannot be installed: The processor does not have required visualization capability.
The VM properties is:
Memory 1GB
Processor 2
Thanks to help me on this,
Zara

Confirmimg brian response, the CPU needs virtualization features for Hyper-V to be enabled.
The following link shows the hyper- V requirement for Hyper-v 2008 R2 (also true for 2012)
https://technet.microsoft.com/en-us/library/cc731898.aspx
If you want to test hyper-v inside VMs, you can download VMware workstation. There is an interesting feature (only for test purposes) that can let the vcpu inherit virtualization features, that you can enable via the VM settings. You will however notice
performances hit.
Regards, Samir Farhat Infrastructure Consultant

Hyper-V hangs forever at Server 2012 reboot

When I reboot the host OS (Dell server), it tries to shut down the VM. There is a single VM running server 2012 with Exchange set up. The reboot process hangs for about an hour with the screen showing "Shutting down service: Hyper-V Virtual Machine
Management". The activity indicator circle continues to go around.
I've noticed a couple other weird things this past week. When trying to load up wbadmin (host) to see the status of the last scheduled Windows Server Backup job, MMC just sit's there for hours "loading data". I have to manually kill it. I also
am unable to uninstall anything. It sit's in the "calculating disk size" stage and I have to manually kill the process.
I ran a SFC and it found and corrected a corrupted file(s). I wanted to see what people thought could be causing this super-long reboot process. Server has 32gb ram, 16 of which assigned to the Exchange VM. No line of business app's, no SQL or other apps.
It's an incredibly simple domain with 8 users.
The only complication is that the Exchange VM is set up to replicate to another machine that is running Hyper-V Server as the host OS. This replication has been problematic, requiring me to manually sync is several times. But the connection is solid, via
a cat5e cable in the same room as the primary server (till the off-site office and a VPN is ready to hold the secondary server).

Hi RedRules,
I don’t found the similar issue, base on my experience, it most possible may your disk corrected, Could you try
to move the vm to another drive and confirm there don’t have the corrupted block on your disk.
You can refer the following related thread to do the disk check:
Run CHKDSK /F to check for hard drive corruption. S"line-height:107%;font-family:'Verdana','sans-serif';font-size:10pt;">http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/run-chkdsk-f-to-check-for-hard-drive-corruption/05a2345a-a81e-4c44-a24b-ad299987a44c
Or the following KB:
An explanation of CHKDSK and the new /C and /I switches
http://support.microsoft.com/kb/187941
Disk Concepts and Troubleshooting
http://technet.microsoft.com/en-us/library/cc977215.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot install SharePoint 2013 with SP1 on server 2012 R2. IIS configuration error

Hey Guys,
I'm experiencing a problem which seems to be common considering the number of posts I've found about it, but none of the provided solutions worked for me.
I'm simply trying to install SharePoint 2013 with SP1 on a Windows Server Standard 2012 R2.
I've downloaded from the MS Volume Licensing website the "SharePoint Server 2013 with SP1" ISO file : SW_DVD5_SharePoint_Server_2013w_SP1_64Bit_English_MLF_X19-36118. So
this is the slipstreamed version which is supposed to bring compatibility with 2012 R2.
As I do not have direct access to the Internet I need to perform an offline installation. I also downloaded all prerequisities. When I run prerequisiteinstaller.exe with the necessary arguments, I get the following :
(Full log file is below)
I've tried the following :
- Restarted the server multiple times
- Manually removing/adding IIS role + restart
- Running the prerequisiteinstaller.exe from the DVD or from an extracted version
- Manually installing the prerequisities
- Installed .Net 3.5 as recommended here (http://social.technet.microsoft.com/Forums/office/en-US/0b597d35-b02d-4236-894d-38efc0c7c6f6/sharepoint-2013-with-sp1-install-on-windows-server-2012-r2?forum=sharepointgeneral)
None of the worked. So I'm stuck and I must completed the installation of this before the end of the week for an important project !
Your help would be greatly appreciated.
this is the complete log file :
2014-09-09 14:30:26 - Processor architecture is (9)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Common Startup
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-09-09 14:30:26 - Trying to remove the startup task if there is any.
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-09-09 14:30:26 - Successfully deleted the startup task
2014-09-09 14:30:26 - Analyzing the following command line argument:
2014-09-09 14:30:26 - /continue
2014-09-09 14:30:26 - Continuing after restart
2014-09-09 14:30:26 - Details of the current operating system:
2014-09-09 14:30:26 - Major version number of the operating system: (6)
2014-09-09 14:30:26 - Minor version number of the operating system: (2)
2014-09-09 14:30:26 - Build number of the operating system: (0X23F0=9200)
2014-09-09 14:30:26 - Major version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Minor version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Platform ID of the operating system: (2)
2014-09-09 14:30:26 - Product suites available on the operating system: (0X110=272)
2014-09-09 14:30:26 - Product type of the operating system: VER_NT_SERVER
2014-09-09 14:30:26 - Product type: (0)
2014-09-09 14:30:26 - OS type: (2)
2014-09-09 14:30:26 - Configuring the application's property sheet...
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Management Framework 3.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - PowerShellVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft .NET Framework 4.5
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - Install
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is (1)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.5.51641
2014-09-09 14:30:26 - A post release .NET 4.5 is installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 6.1.7600.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:26 - Reading version of the following file...
2014-09-09 14:30:26 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:26 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 10.51.2500.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Server AppFabric
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - ProductVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Information Protection and Control Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.0.51212.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.6.61587.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - IsInstalled
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:30:26 - Beginning download/installation
2014-09-09 14:30:26 - Created thread for installer
2014-09-09 14:30:26 - "C:\Windows\system32\dism.exe" /online /enable-feature /featurename:NetFX3 /All /norestart
2014-09-09 14:30:27 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:28 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:29 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:30 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:31 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:32 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:33 - Install process returned (0)
2014-09-09 14:30:33 - [In HRESULT format] (0)
2014-09-09 14:30:33 - "C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe" -ExecutionPolicy Bypass "C:\Users\DADM_T~1\AppData\Local\Temp\PreFB24.tmp.PS1"
2014-09-09 14:30:33 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:34 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:35 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:36 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:37 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:38 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:47 - Install process returned (0)
2014-09-09 14:30:47 - [In HRESULT format] (0)
2014-09-09 14:30:47 - "C:\Windows\system32\dism.exe" /online /enable-feature /all /featurename:IIS-ASPNET45 /norestart
2014-09-09 14:30:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:49 - Install process returned (0)
2014-09-09 14:30:49 - [In HRESULT format] (0)
2014-09-09 14:30:49 - "C:\Windows\system32\iisreset.exe" /noforce
2014-09-09 14:30:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Install process returned (0X426=1062)
2014-09-09 14:30:57 - [In HRESULT format] (0X80070426=-2147023834)
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Flags
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PendingFileRenameOperations
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-09-09 14:30:57 - Reading the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-09-09 14:30:57 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
2014-09-09 14:30:57 - Cannot retry
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Management Framework 3.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PowerShellVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft .NET Framework 4.5
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Install
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is (1)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.5.51641
2014-09-09 14:30:57 - A post release .NET 4.5 is installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 6.1.7600.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:57 - Reading version of the following file...
2014-09-09 14:30:57 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:57 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 10.51.2500.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Server AppFabric
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - ProductVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Information Protection and Control Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.0.51212.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.6.61587.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - IsInstalled
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:32:19 - Opening log file
2014-09-09 14:32:19 - Opened action for user
2014-09-09 14:32:19 - C:\Users\DADM_T~1\AppData\Local\Temp\prerequisiteinstaller.2014.09.09-14.30.26.log

Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

SSIS modules created with VS2013 fail on SQL Server 2012

HI all,
i've just installed SQL Server 2012, VS 2013 (Premium) and SQL Server Data Tools (SSDTBI_VS2012_x86_ENU) on my local workstation (running Win7 x64).
Creating and debugging of new SSIS modules works well, while execution of the module using DTEXEC fails with:
   Description: Package migration from version 8 to version 6 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".
How to create SSIS modules with VS2013, which are executable on SQL Server 2012?
Any help is appreciated!
Thank you in advance!
Details:
D:\tmp>dtexec /f Package_by_vs2013.dtsx
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Copyright (C) Microsoft Corporation. All rights reserved.
Started: 12:48:51
Error: 2014-04-09 12:48:52.69
   Code: 0xC001F02A
   Source: Package
   Description: Cannot create a task from XML for task "Execute SQL Task", type "Microsoft.ExecuteSQLTask" due to error 0x80070057 "Falscher Parameter.".
End Error
Error: 2014-04-09 12:48:52.69
   Code: 0xC0010018
   Source: Execute SQL Task
   Description: Failed to load task "Execute SQL Task", type "". The contact information for this task is "Execute SQL Task; Microsoft Corporation; SQL Server 2
014; ? 2014 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
End Error
Error: 2014-04-09 12:48:52.72
   Code: 0xC0010026
   Source: Execute SQL Task
   Description: The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; SQL Server 2014; ? 2014 Microsof
t Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
End Error
Error: 2014-04-09 12:48:52.72
   Code: 0xC0024107
   Source: Execute SQL Task
   Description: There were errors during task validation.
End Error
Error: 2014-04-09 12:48:52.72
   Code: 0xC0010025
   Source: Package
   Description: The package cannot execute because it contains tasks that failed to load.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:48:51
Finished: 12:48:52
Elapsed: 1.123 seconds

Hi,
I have moved this thread to
SQL Server Integration Services forum for better support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows 8.1 Pro cannot log into RemoteApp running on Windows Server 2012 R2

I have setup a vm running Windows Server 2012 R2 Standard and have enabled multiple RemoteApps. Everything is setup correctly and I can use RD Web Access to access the portal and connect to the remoteapps from any computer except my own. I am
running Windows 8.1 Pro and when I log into the RD Web Access portal, click on one of the apps, it looks like it's loading the session, but gets stuck on Preparing Windows. Everything else up to that point looks like it loads correctly, (i.e. -
Applying Group Policy Settings, applying desktop, etc...). When I log into my Windows 7 dev machine, I can access and run everything just fine. So there must be something between the Windows 8 and 2012 that isn't working quite right.
I have tried logging into the portal as myself and test users...same result.
any ideas?
Jon Wooten

i think there is something in your GPOs or collection settings causing an issue
this happens with any remote app, built-in stuff like notepad or just third party apps?
try not doing any kind of printer/device redirection from that host
you can also do winlogon logging to get a better idea of what's going on during the logon operation
you can also use the verbose logon messages GPO to get detailed login status info
if all else fails I think you need to isolate it by creating a test collection and test user with the bare minimum options

Cannot view webpages from internet using windows server 2012.

I can ping public websites, such as google.com etc
Dns resolves name resolution correctly, returning correct ip address.
My issue is that no webdata(html) is returned when requesting a webpage from a public website
I have reduced my internet explorer security settings to the lowest possible just for testing.
I can view local websites on my server correctly.
I am also currently trying activate my windows server 2012 and cannot do this as a result of this issue.
No windows update are taking place either.
I am using a d-link adsl router(DSL-2750U) via the lan to access the internet.
My server is a Dell PowerEdge T20
My laptop can connect to the internet and has no issues using the same network.
I have tried using fixed and dynamic IPs
I am trying to connect to the internet for the 1st time from the server.

Hi,
Or please disable all your firewall and AV soft, as far as in know, some AV soft can block some “unsafe” website URL, or disable the IE ESC.
The related article:
How To Turn Off Internet Explorer Enhanced Security Configuration
http://blogs.technet.com/b/chenley/archive/2011/03/10/how-to-turn-off-ie-esc.aspx
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Create Clusters, formatting times out on server 2012 r2 datacenter

Hi all,
This is the problem i keep getting and i don't know what to do anymore.
Can anyone help me
Cluster: FFS
Node: Win2012-1.Samsung.com
Node: Wins2012-2.Samsung.com
IP Address: 10.xxx.xxx.xxx
Started 4/17/2014 12:15:28 PM
Completed 4/17/2014 12:18:54 PM
Beginning to configure the cluster FFS.
Initializing Cluster FFS.
Validating cluster state on node Win2012-1.Samsung.com.
Find a suitable domain controller for node Win2012-1.Samsung.com.
Searching the domain for computer object 'FFS'.
Bind to domain controller \\Win2012-1.Samsung.com.
Check whether the computer object FFS for node Win2012-1.Samsung.com exists in the domain. Domain controller \\Win2012-1.Samsung.com.
Computer object for node Win2012-1.Samsung.com does not exist in the domain.
Creating a new computer account (object) for 'FFS' in the domain.
Check whether the computer object Win2012-1 for node Win2012-1.Samsung.com exists in the domain. Domain controller \\Win2012-1.Samsung.com.
Creating computer object in organizational unit OU=Domain Controllers,DC=Samsung,DC=com where node Win2012-1.Samsung.com exists.
Create computer object FFS on domain controller \\Win2012-1.Samsung.com in organizational unit OU=Domain Controllers,DC=Samsung,DC=com.
Check whether the computer object FFS for node Win2012-1.Samsung.com exists in the domain. Domain controller \\Win2012-1.Samsung.com.
Configuring computer object 'FFS in organizational unit OU=Domain Controllers,DC=Samsung,DC=com' as cluster name object.
Get GUID of computer object with FQDN: CN=FFS,OU=Domain Controllers,DC=Samsung,DC=com
Validating installation of the Network FT Driver on node Win2012-1.Samsung.com.
Validating installation of the Cluster Disk Driver on node Win2012-1.Samsung.com.
Configuring Cluster Service on node Win2012-1.Samsung.com.
Validating installation of the Network FT Driver on node Wins2012-2.Samsung.com.
Validating installation of the Cluster Disk Driver on node Wins2012-2.Samsung.com.
Configuring Cluster Service on node Wins2012-2.Samsung.com.
Waiting for notification that Cluster service on node Win2012-1.Samsung.com has started.
Forming cluster 'FFS'.
Unable to successfully cleanup.
An error occurred while creating the cluster and the nodes will be cleaned up. Please wait...
An error occurred while creating the cluster and the nodes will be cleaned up. Please wait...
There was an error cleaning up the cluster nodes. Use Clear-ClusterNode to manually clean up the nodes.
There was an error cleaning up the cluster nodes. Use Clear-ClusterNode to manually clean up the nodes.
An error occurred while creating the cluster.
An error occurred creating cluster 'FFS'.
This operation returned because the timeout period expired
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.

Hi,
Additional, if you are trying to create a new failover cluster please install the following recommended hotfixes and updates for Windows Server 2012-based failover clusters
packs.
The related KB:
Recommended hotfixes and updates for Windows Server 2012-based failover clusters
http://support.microsoft.com/kb/2784261/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Need to install Hyper-V Management tools on Server 2012 VM

I need to install the Hyper-V Management tools onto a Server 2012 VM. However it won't let me install the management tools because it says hypervisor is already running. I've done this before from PowerShell but I can't remember the exact command that I
used and it's driving me crazy. Anyone know how to install just the management tools on a 2012 VM?
Vincent Sprague

Hi,
Thanks for sharing your experience!
You experience and solution can help other community members facing similar problems.
Thanks for your contribution to Windows Server Forum!
Have a nice day!
Lawrence
TechNet Community Support

How to create Auto weakly backup in Windows Server 2012

Hello
1. I want to set auto backup in windows server 2012 Weakly.
2. can i Set auto backup like a normal data copy.

By configuring automatic backup, you can schedule this task according to your choice(weekly/monthly). You can use backup schedule wizard accessed from the Windows Server Backup user interface (Wbadmin.msc).
To schedule backup task by using powershell, please checkout this link :
http://technet.microsoft.com/en-us/library/dd759156.aspx
Also, have a look at here :
http://technet.microsoft.com/en-us/library/cc770757.aspx

Cannot create Hyper-V external virtual switch Server 2012 R2

Similar Messages

Maybe you are looking for