Cannot create ISO image in Boot Camp on to the flash drive

After following all the steps of the article: Boot Camp: Creating an ISO........
In step 21 the progress bar reached 50% then stop a message appears Cann't establish connection?
My internet connection is fine,the documents have been copied on the 32GB flash drive formatted in FAT32,
Repeated ,change flash drives, created another image from new DVD,
Unable to finish this process?
Any ideas?

Your MacPro is a UEFI model based on How to identify Mac Pro models - Apple Support since it has a Model Identifier of 6,1. From Bootcamp Info.plist
      <key>PreUEFIModels</key>
        <array>
                <string>MacBook7</string>
                <string>MacBookAir5</string>
                <string>MacBookPro10</string>
              <string>MacPro5</string>
                <string>Macmini6</string>
                <string>iMac13</string>
        </array>
1. Use Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support to download the appropriate drivers from the Apple servers manually to a flash drive. You will need Boot Camp Support Software 5.1.5640.
System Requirements
MacBook Air (11-inch & 13-inch, Mid 2013)
MacBook Pro (Retina, 13-inch & 15-inch, Late 2013)
Mac Pro (Late 2013)
iMac (21.5-inch & 27-inch, Late 2013)
Windows 7, Windows 8, and Windows 8.1, 64 bit
2. Remove all physical external drives except the OS X and the designated Windows drive. Manually partition your drive and create a Free Space partition of the size you want. This will be split into a 128MB MSR and remainder MS Data partition. This is called EFI installation of Windows.
3. Insert your Windows DVD in the built-in Optical Drive.
4. Plug-in your USB2 flash drive from step 1. Remove all other external peripherals, except Keyboard/Mouse/Display. The Keyboard/Mouse being wired eliminates issues with Bluetooth.
5. Start BCA and choose the last option 'Install/Remove Windows'. Choose the EFI Boot from the DVD. You can also do the same using the Alt/Option key when powering up the MacPro.
6. Windows installer should start. If it does not, please post back with any error messages.
I assume that you have not modified Bootcamp info.plist to try and create a bootable USB.

Similar Messages

Boot camp install from USB Flash Drive

Hi Folks,
I recently purchased a new Macbook Air. It has 10.8.3.
I used the Boot Camp Assistant to set up the computer for Boot Camp. It went through all the steps: First, it formatted my USB Flash Drive. Next, it copied Windows installer crap from the my ISO to the USB Drive. Next, it downloaded the Apple Drivers and put them on the USB drive. Next, it restarted in order to boot from the USB drive.
This is where I hit a wall. The computer will not bpt from the Flash Drive. It is as if the control panel has set the startup disk to "BOOTCAMP" instead of the flash drive. So when the computer restarts, it just says "No bootable device - insert boot disk and press any key."
How can I get it to boot from the flash drive?
Thanks In Advance
Andy
Corrected the error message to exact phrase.

Hmmm... interesting... My sites I found suggested otherwise. I tried three diferent brands of jump drives and none of them actually booted the Macbook Air. The Boot Camp Assistant used them all just fine, but booting was the issue. Glad you got it to work. Would you mind posting what brand you used so other reading this thread in the future could learn?
Also, were you just using the BCA or, did you do some other process to make it bootable first? Since the BCA formats the drive, I would think any process done ahead of time would be thwarted (as mine were).
Thanks!

What is the ISO image that boot camp is asking for when i try to in tall windows 7 on my mac book air?

I am at the point in boot camp where i am creating a bootable USB drive for windows installation, it has a flash drive selected but is asking for an ISO image, i am installing windows 7 and have no idea where the iso image is on the disk.

It is asking for an .iso image of the Windows bootable installer DVD. This would be the .iso file you would get had you purchased Windows and downloaded your purchase. If you have the Windows DVD then you don't need to do what you are doing. Just boot from the DVD to install Windows.
Open Boot Camp Assistant and click on the large button, Print Documentation. Read carefully before proceeding.

Whats the ISO image for Boot camp assistant.

I'm trying to download windows for my MacBook Air (2013) on Boot Camp Assisstant but i don't know what an ISO image is.

iso is a carbon copy of an optical disc read more here
http://en.wikipedia.org/wiki/ISO_image
any optical disc can with one of 100000 free tools be made into an iso and the other way around

How do I get an ISO Image for Boot Camp?

I can't use bootcamp because i don't have a Windows 7 ISO Image. Where can i get a Windows 7 ISO Image?

http://blog.mclaughlinsoftware.com/2009/09/03/convert-dvd-to-iso-on-mac/
more options
https://www.google.dk/search?client=opera&q=make+dvd+into+an+iso+mac&sourceid=op era&ie=utf-8&oe=utf-8&channel=suggest

I want to install windows7 on my 27in iMAC. I have an OEM version of Win7 which is win pro 7, 64 bit english. I will use boot camp to partion the hard drive for a win7 install. Can I use this version for the installation ??

My iMAC is a 2011 3.4 GHz intel i7 based with a 27in display. A year ago, I bought a Microsoft win pro 7 64-bit english OEM OS to install over a newly assembled AMD PC. I never installed it. Now, I want to put it on my iMAC using either Apple Bootcamp or Parallels. The win 7 OEM package has a lot of verbage about using an OEM preinstallation kit (OPK) and that it must be preinstalled on the hard drive. Is it OK to install this win7 version following the Bootcamp instructions.?
K6JPJ

Please post in the Boot Camp (not Bootcamp) forum I'm sure someone there can answer your quesiton if no one here is able to.

How do I back up my Boot Camp partition to external firewire drive?

I have a 15 GB Windows XP Boot Camp partition (FAT32). I want to back it up to a 120 GB external Firewire drive. (I know the backup won't be bootable). In OX X Disk Utility, I formatted the external drive as MS-DOS (FAT). I planned to do the backup using the Windows Backup utility.
However, when booted into WinXP, Windows will not recognize the external hard drive. I thought I might need to create a FAT32 partion of 32 GB or less on the external drive, but I apparently can't do this in OS X or Windows (since Windows doesn't recognize the drive).
Any suggestions on how to backup the Boot Camp partition will be appreciated. I'm mainly interested in preserving all programs and data. Ideally, a clone could be created that could be restored back to the original partition in bootable form, but from studying this and other forums, it dosn't seem to be easy to do this for a FAT32-formatted volume.

My goal was to create a bootable clone of my FAT32 Boot Camp partition, while at the same time increasing the size of the partition from 15 GB to 32 GB if possible. This is what I did:
1. As suggested in this thread, I used Disk Utility to create a disk image. I formatted it as MS-DOS (FAT), and made it 32 GB in size.
2. Used the Finder to copy all files from my 15 GB Windows XP partition to the new disk image.
The following steps were only to determine if the disk image is a viable backup:
3. Removed the internal hard drive with my original Win XP partition, and installed a new internal hard drive.
4. Used Boot Camp Assistant to create a 32 GB Boot Camp partition on the new internal drive.
5. Inserted my Win XP installation disk and started the Windows installation. Formatted the new partition as FAT32. (I used the long rather than the quick format method--not sure if this was necessary.)
6. Continued the Windows installation to the point of restarting the computer, at which time I used the Option key to boot back into OS X.
7. Used the Finder to copy all the files from the 32 GB disk image to the new Boot Camp partition. (This overwrote a few Windows files installed by the aborted Win XP installation.)
8. Restarted and used the Option key to select the new 32 GB Boot Camp Partition. Windows booted as usual with all files, programs, etc. from the original 15 GB partition. Windows did complain about "new hardware" and required a restart, but all appears normal.
This indicates that the disk image containing all the files from my original Boot Camp partition is a viable backup, and can be used to restore the partition if necessary. I'm not sure if formatting the disk image as MS-DOS (rather than Mac OS extended) was necessary, or not.

How can I get my Boot Camp partition off my old drive?

I swapped out the stock 160gb drive that came in my MacBook Pro since it was acting up. I installed a new drive and restored it with Time Machine, but now my Boot Camp partition is still on my old drive. I slipped my old drive into a usb sata enclosure and tried booting from it in hope I could back it up with Winclone. When I went into the startup disk selector the drive would not show up (but it sounded like it was trying to spin up). Earlier when I pulled the drive out of my MacBook Pro it was still functioning fine, so I do not think the drive has failed.
Any ideas on how I can get the Boot Camp partition off the old drive? Thanks for your help.
-Ryan

Some drives require more current to spin-up from a "cold start" than most USB ports put out, even if the port supplies. Additionally, if the drive is failing, it may require even more power for the startup.
I have a couple USB enclosures with external AC power that I keep around in case I run into drives like this. Failing that, I also have a couple of USB cables which use 2 ports to provide additional current. Also the cable length, and gauge makes a difference.

Creating and restoring a Boot Camp partition using Paragon

I am trying to restore a clone of the Boot Camp partition that's on my MacBook Air (Snow Leopard) to My MacBook Pro (Lion).
I was told I could do this without requiring the Windows 7 installation disk by using Paragon Hard Disk Manager.
I downloaded the Paragon Hard Disk Manager on the MacBook Air in the Windows partition and followed the steps the Wizard told me. I chose back up. I successfully backed up the Boot Camp partition but noticed that the amount of disk space on the back up external drive was about 8GB, but the amount used up by Boot Camp was 16 GB.
When I went into the new computer and tried to create a Boot Camp partition, I am not able to do this without installing Windows software.
When I plugged in the external drive which had the back up on it, it just has some files and no Wizard I can use to restore the Windows partition.
So I think I've done it wrongly.
When I first started the wizard, there was a choice of making an image. I did choose this initially and a message came up and said I had done this but there was nothing else - no information about where this image was and what I should do with it. So I chose "Back up" and that is where I am.
Even if I do manage to create an image that contains everything, the operating system and the files, how can I restore that to the newly created Boot Camp partition on the other computer if in order to create the Boot Camp partition I need to install a Windows 7 disk?
It's not that I don't have a valid Windows 7 installation disk, I do but I have to call telephone support to install it because the activation is tied to the first laptop which has issues and needs to be repaired and that's why I am doing the migration of the data. And it's inconvenient to do the telephone thing because it's after hours now and I want to get the clone of the Windows partition before I send off the computer for repairs which I am supposed to do tomorrow morning.
Plus, I am not sure by using the Windows 7 installation disk and migration of data method that I will have the partition looking exactly the same as before, and that's very important for me because I do internet banking with a foreign bank and it took ages for them to set up the internet banking on my computer, and I am worried that internet banking won't work if I do not have an exact clone of the Windows partition.
I can go back again and try making an image disk but I still have the problem of using the Paragon program which is a Windows program on the Mac operating system, which I have to use when I am creating the Windows partition. Is there other software from Paragon that I am supposed to get?

Paragon didn't work for me and their support is quite lousy. I think I just threw $50 away.
I didn't need another activation key to install Windows 7 on the second computer (MBP). The boot camp installation went smoothly. Once in Windows, I downloaded the software again, Paragon Hard Disk Manager, and then chose "restore". It didn't recognize the archive I had made on the external hard drive no matter what I did. I had to give up after a few tries.
So I went to the Paragon website to look for answers in the support section.
They do not respond to emailed support questions for up to three days after you send in the question even if you are a new customer.
I am tempted to ask for a refund because they have false advertising claiming that their product works when it doesn't.
The steps are not that hard to follow if you use their Wizard and the Wizard told me that I had done everything right and that I had created an archive and I named it and everything.
When I went to restore it, nothing. I couldn't even eject the volume. Very strange.
Their FAQ on Support site is unhelpful and full of technical terminology. Nothing pertains to my problem.
I really don't want the headache. Besides if all I wanted was to do a backup I could have used the free back up and restore utility in Windows 7 which is meant to be excellent.
Another Apple Support Discussion member said they had a similar problem, a problem with the archives, and that even after working with Paragon for seven months, it was still not resolved.
After a certain period of time after you've bought the product, you have to pay $50 to get support. It's not worth the bother.
It's a German company and German companies in general are not big into service. I can tell that this is true with this company.
So having been burned, I really do not want to keep going down this path. I really just want my money back.

Boot camp wont show the option for installing via iso file

version 5.0.2(462)
the boot camp doesnt show the option to install the windows via iso file
i wanna install windows 7 via an iso file
plz help me as soon as possible

That option is only available for Macs without a built-in SuperDrive (the MacBook Air, Mid 2011 and newer Mac minis, the Late 2012 iMac, and the MacBook Pro with Retina display).
If you haven't got one of those computers and Boot Camp Assistant doesn't show the option to install Windows 7 from a ISO file, your Mac doesn't support the Windows installation from a USB because it's restricted by firmware to a Mac without a SuperDrive. In this case, you have to buy Windows 7 on a DVD from eBay or Amazon, and use it to install Windows through Boot Camp.
If you still wants to install Windows from a ISO file, the only option is to install it on a virtual machine, using an application like Parallels, VMware Fusion or VirtualBox

Can Windows 7 be installed using the latest version of boot camp on 3TB fusion iMac drive?

I have tried unsuccessfully several times to install an .ISO version of 64-bit Windows 7 SP1 on my late 2012 iMac, equipped with a 3TB fusion drive. My proposed Windows partition, set up under boot camp assistant from the utility folder, is well under the 2.2TB size limit. I have carefully followed all the prescribed steps using the latest available software mounted on a FAT USB thumb drive.
The install fails, however. early on when Windows fails to recognize the requested partition situated in the fourth slot. I get an error message that the partition can't be found. ("Setup was unable to create a new system partition or locate an existing system partition.") I have picked the partition labled "BOOTCAMP."
After booting back on the Apple side, the disk utility shows the partition as being there formatted as a FAT install.
Apple has an update release with the 10.8.3 version of OS X that says this bug has been addressed and should now work.
I would greatly appreciate some help.

I have tried unsuccessfully several times to install an .ISO version of 64-bit Windows 7 SP1 on my late 2012 iMac, equipped with a 3TB fusion drive. My proposed Windows partition, set up under boot camp assistant from the utility folder, is well under the 2.2TB size limit. I have carefully followed all the prescribed steps using the latest available software mounted on a FAT USB thumb drive.
The install fails, however. early on when Windows fails to recognize the requested partition situated in the fourth slot. I get an error message that the partition can't be found. ("Setup was unable to create a new system partition or locate an existing system partition.") I have picked the partition labled "BOOTCAMP."
After booting back on the Apple side, the disk utility shows the partition as being there formatted as a FAT install.
Apple has an update release with the 10.8.3 version of OS X that says this bug has been addressed and should now work.
I would greatly appreciate some help.

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

Does anyone know what the partitions look like after installing boot camp on a 3T fusion drive

I installed a boot camp partition on a 3T fusion drive. Running disk utility afterward it looks like this.
Is this what it should look like? I understand about the need for bootcamp to create 2 physical drives in core storage in order to install boot camp on a 3T fusion drive but should I see both drives after it is done?

Boot Camp Assistant ejects The Windows intaller disc

Hi to everyone,
iMac:
- Intel-based iMac (late 2008).
OS and Hardware:
- Mac OS X version 10.5.7
- Boot ROM Version: IM81.00C1.B00
- SMC Version (system): 1.30f1
DVD Drive:
- OPTIARC DVD RW AD-5630A
- Firmware Revision: 1AHN
I'm trying to install Windows XP Pro OEM SP3 (version 2002).
I launched Boot Camp Assistant 2.0 and created a 32 GB Bootcamp partition. So far so good, then I'm asked to insert the Windows installer disc. I do what is asked then wait a few seconds and click "Start Installation". After about 20 seconds or so, Boot Camp Assistant ejects the Windows disc and displays this: "The installer disc could not be found." I re-insert the disc but the same thing happens again and again.
This is what I tried before posting here for your help:
I quit Boot Camp Assistant and tried to insert the Windows XP Pro installer disc and it won't mount at all and will eventually be ejected.
I thought the disc might be damaged so I inserted it in a PC and everything seems right with the disc. I can see all files using the PC computer that is 5 years old.
I thought it would be a firmware problem with my iMac so I accessed this page http://support.apple.com/kb/HT1237 and it seems there is no firmware update required for my iMac.
I execute the command Apple>Software Update and there is nothing to update.
Is there someone able to help me?
Thank you in advance.
Kazon

Hi,
I solved the problem myself. This might help others.
Recap:
The Windows XP Pro CD was always ejected by Boot Camp and it wouldn't mount at all when inserted in the CD slot. The CD was however readable on a Windows Machine.
It was not easy to detect but the Windows CD was physically deformed. It wasn't flat. It was a little convex (the outer edge was higher than its center). My iMac wasn't able to read it at all but a PC was able until I decided to test it with a full install on the PC. About half way during the installation, it stopped and an error message was displayed by Windows Setup "Disc Read Error - Disc might be damaged".
I ejected the CD and discovered the deformation. So I carefully placed the outer edge of the CD over a ring and put some weight on its center to try to undo the deformation. I've waited 2 days then retested the CD and it worked at the first attempt. My iMac was happy and so was I. I made a security copy of the CD while it's still readable in case I have to re-install later.
I find Microsoft cheap of putting their Installation CD in a paper sleeve. If the CD have been stored in a CD case this would not have happened.
End of the story.

Problems installing Windows 7 with boot camp, cant find the cd/dvd driver...

I´m having some problems installing Windows 7 on my new 12,1 (21,5) iMac with boot camp. When the computer restarts and the Windows 7 setup begins, i get the message that the cd/dvd driver cant be found, so i can't continue the installation. I've tried searching online for the driver, but can't find it. The cd/dvd seems to be a OPTIARC cd/dvd ad-5690h, which seems to be produced by Sony. I have a authentic windows 7. I even tried loading everything ver to a usb-drive, but then it wont boot.

After reading around on this, and other forums I tried to burn a new dvd at reduced speed(2x), but that did'nt work either... I have an authentic windows 7 iso, downloaded with serial, is there any way to boot this from a jump drive or external hdd?

Cannot create ISO image in Boot Camp on to the flash drive

Similar Messages

Maybe you are looking for