Cannot create local iDisk

On this G4 Quicksilver I cannot create a local iDisk any longer. I have a "Previous local iDisk for unokjellberg.dmg" on my desktop, but whether I stop and start synchning in System Preferences, automatic or manual, I do not get any local iDisk. I do get the serverbased iDisk though, but it is slower than the local one.
What do I need to do to correct this?
Thanks
/Uno

Hi Christopher,
According to your description, you cannot create a global cube with the error
Either a connection cannot be made to the <SERVER>\<INSTANCE> server, or Analysis Services is not running on the computer specified.The following system error occurred: No connection could be made because the target machine actively refused
it.
Based on my research, one possible reason for this issue is that the GROUPING feature is used in the PivotTable, a session cube is created in the local cube connection. So in your scenario, do you use the GROUPING feature in the PivotTable?
Besides, from a support perspective this is really beyond what we can do here in the forums. If you cannot determine your answer here or on your own, consider opening a support case with Microsoft. Visit this link to see the various support options that
are available to better meet your needs:
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

Cannot Create Local Lock File

There is one page on my website that when I press "edit
page", it says that it "cannot create a local lock file". Every
other page on the website can at least access the edit screen,
except this one.
The website is
http://www.ergofitconsulting.com/
, go to the "about us", then the "presentations" tab, you will
notice that it then has 3 sub-selections "nationaol", "regional",
and "local". This is the only thing I can see that might set it
apart from the other pages for editing, the fact that it has an
additional layer of selections.
Like I say, this is the only page which will not open up in
edit mode. I did not design the page, I am just some hired help
trying to figure out how to paste in some updated changes. If
anyone can help me, I'd much appreciate it.

There is one page on my website that when I press "edit
page", it says that it "cannot create a local lock file". Every
other page on the website can at least access the edit screen,
except this one.
The website is
http://www.ergofitconsulting.com/
, go to the "about us", then the "presentations" tab, you will
notice that it then has 3 sub-selections "nationaol", "regional",
and "local". This is the only thing I can see that might set it
apart from the other pages for editing, the fact that it has an
additional layer of selections.
Like I say, this is the only page which will not open up in
edit mode. I did not design the page, I am just some hired help
trying to figure out how to paste in some updated changes. If
anyone can help me, I'd much appreciate it.

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]

Hi Guys,
Im trying to create a repository .I have a single node OVM server and have presented two LUN's (Hitachi HUS110 direct attached (via FC))
I've created a server pool and unchecked the clustered server pool. I see the LUN's (physical disk from Oracle Virtual manager) .But when creating the repository i'm having this error
"OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]"
Any steps i missed?Appreciate anyone's input
Regards,
Robert

Hi Robert,
did you actually add the OVS to the server pool, that you created?

Cannot create the RTP Session: Can't open local data port

Hi,
I'm trying to connect to two webcams simultaneously in the order:
MediaLocator inputLocator1 = new MediaLocator("rtp://hostname1:8000/video");
MediaLocator inputLocator2 = new MediaLocator("rtp://hostname2:8000/video");
But I get this during the second connection:
Cannot create the RTP Session: Can't open local data port: 8000
And I can't see the video from hostname2.
I did a check via netstat, and it seems that both mycomputer is receiving the video from both hostname1 & hostname2:
TCP mycomputer:3236 hostname1:8000 ESTABLISHED
TCP mycomputer:3264 hostname2:8000 ESTABLISHED
TCP connections to both host were established!! But why can't I see the video of hostname2???? I've thought of 2 possible reasons why I cannot see the video of hostname2:
1. Is this set of local data port maintained by Java? i.e It's not the same as the TCP port 8000 that I see in mycomputer's netstat. If yes, Java has assigned its local data port 8000 to hostname1, so it fails to reassign that port 8000 to hostname2 while hostname1 is still connected. Any other way to fix this apart from changing the portnumber of hostname2?
2. It has to do with the custom.jar? I've read in an article somewhere in the forum that the custom.jar has to be customized (using JFMCustomizer) to receive video from two hosts with the same portnumber. Can someone elaborate the necessary boxes to check in the JFMCustomizer?
Thanks much,
Rach

After all this while, I finally figured out the problem. In my code, I use MediaLocator to code the receiver and the transmitter. E.g.:
MediaLocator inputLocator1 = new MediaLocator("rtp://hostname1:8000/video");
player1 = Manager.createPlayer(inputLocator1)
MediaLocator inputLocator2 = new MediaLocator("rtp://hostname2:8000/video");
player2 = Manager.createPlayer(inputLocator2)
Manager would complain "Cannot create the RTP Session: Can't open local data port: 8000" because port 8000 is already used up by player1, i.e.:
mycomputer:8000 maps to hostname1:8000
mycomputer:8000 cannot re-map to hostname2:8000
To work around this, I'll need to use SessionAddress. SessionAddress provides the flexibility to do an independent local port mapping, e.g.:
mycomputer:5000 maps to hostname1:8000
mycomputer:5002 maps to hostname2:8000
Rach

Oracle Forms 11gR2 - Cannot deploy locally from within Forms

I cannot deploy locally from within forms. The server is up and running and I can deploy the form by putting the correct URL in the address line of the browser window. When I try to deploy from within forms it comes up with some crazy URL that differs everytime.
This is what the URL should be and this works from the browser:
http://machinename:7002/forms/frmservlet?form=WRD608ADMIN_11g.fmx&userid=&otherparams=useSDI=yes
Here is one of the URLs it came up with when I try to run it from within Forms:
http://localhost:60231/lysVL2VjqT33znjfvLwanktVRxTIc6dEwVeRNXXRmhYU2qjf
Localhost is always there, but the rest varies.
In Forms, I have the Preferences, Runtime set to:
http://machinename:7002/forms/frmservlet
Where machine name is my PC, it is the same for this address as the URL above that works directly from the browser.
So what am I missing?
Thank you in advance.

Generally speaking, it is discouraged to manually edit any of the configuration files if they are managed by WLS Console or EM. In this case, default.env is managed by EM. Therefore, changes to the file should be done through EM. If however, you want to alter the file manually, the following is likely the best way to accomplish this:
1. Stop the WLS Admin Server and Node Manager
2. Locate the proper file you wish to edit. By proper I mean, there are several copies of most config files. Most of the config files found in the Oracle Home are actually template files and are not used at runtime. Altering these will not give you the change you want. The default.env you want would be here (assuming Windows)
C:\Oracle\Middleware\user_projects\domains\ClassicDomain\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.2\config
If you are using a "Development" installation type, the above path will reflect AdminServer instead of WLS_FORMS. Remember that Development installations are not for multi-user purposes. Production deployments require the "Deployment" installation type, which can also include the Builders.
Do NOT make any changes yet.
3. Once you find the correct file, create a backup copy. Then open the file for edit (not the backup).
4. Make the desired changes and save.
5. Restart Node Manager and Admin Server if you plan to use them.
For more information about using EM to manage your configuration, refer to the product documentation:
http://docs.oracle.com/cd/E38115_01/doc.111210/e24477/configure.htm#CHDCCGHI

I cannot create a catalog because everywhere I try on my computer, it comes up with cannot Lightroom cannot create a catalog on network volumes. And is there any way to contact Adobe directly? Would you be able to give me a phone number and/or email add

I cannot create a catalog because everywhere I try on my computer, it comes up with cannot Lightroom cannot create a catalog on network volumes. And is there any way to contact Adobe directly? Would you be able to give me a phone number and/or email address?@@

The short and direct answer to your question about catalogs on a network drive is that you can't do that. The catalog must reside on a local drive.
Here is a link to a list of telephone numbers. Choose one that is appropriate:
Adobe Connect Support phone numbers

How do I create Local Network Home Folders for Users from an Active Directory binding?

My situation is this... I run an iMac lab at my school. I have a server set up to manage the network user accounts in the lab. Currently, I can sucessfully create Local Network Users and log in to them from any of the iMacs. My school has an Active Directory set up for all the students on campus. What I'd like to be able to do is configure the server to allow the students to use their user names and passwords from their school accounts to log in to the iMacs and have it automatically build a network user folder on the server for them to use during the lab.
So far, I have been able to configure access for the Active Directory accounts to use the services on the server, mainly File Sharing, but I cannot figure out how to allow them to log into a user account on the client's machines using their same Active Directory credentials. I have even attempted to allow the user accounts to create mobile accounts, but that's not working out either. Entering indivual network user accounts into the server for every student every semester will be a nightmare. I'm sure there's a way to do it automatically using the exisitng Active Directory structure.
The live server is running 10.8.5 Server still, but I've also got a clone running OS X Server in case it matters. Please help!

ok reinstalled everything dns seems to be working have done sudo changeip -checkhostname and it says that both names match but then i started open directory and can't seem to get Kerberos started, i've tried changing it to stand alone then back again but it does nothing. I'm wondering why this would happen? i've tried adding a kerberos record but it doesn't do it just does nothing so i don't know what i'm doing wrong. I wondered if it might be a problem with the two network cards and dns as on ethernet one it is getting the dns name xserve.xxxx.ac.uk (which matches what the college server wants to call us) but on ethernet 2 gets xserve-2.local because it tells me that it already exists on ethernet one and renames it to this. I need to set up NAT so have ethernet coming in on port one and out again on port two. I wonder if my dns is backwards as its got the 192. address the NAT uses but its linked to the ethernet port one dns maybe this is the problem. would this cause open directory not to start kerberos?

PowerView error -Cannot create a connection to data source 'TemporaryDataSource'.

Hello and thanks for the time.
I am getting the following error when trying to create a powerview report. I don't get where is this TemporaryDataSource is and how do I check the permissions on it? that is what this error is pointing to, no? I tried re-installing the
SQL reporting add-in and no go there. SQL Browser services are running. I can see the file in Excel just can't create a powerview report. any and all help is appreciated. thanks.
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'https://teamsite.domain.com/POWERPIVOT/PowerPivot%20Gallery/Test.xlsx'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'https://teamsite.domain.com/POWERPIVOT/PowerPivot%20Gallery/Test.xlsx'. Verify that the connection information is
correct and that you have permissions to access the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error
navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>

Hi,
Issue not supported in sharepoint on-premise team.
In addition, as this issue is related to Powerview, I suggest you create a new thread on for Powerview forum, more experts will assist you.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powerview
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

[SOLVED] C Compiler Cannot Create Executables

I am aware that there is already a thread on this here however it failed to solve my issue. I have installed the multilib-devel packages as the referenced post suggested, but I still receive the following error message when attempting to compile wine-mono package either with makepkg or with yaourt.
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-w64-mingw32
checking target system type... x86_64-w64-mingw32
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-w64-mingw32-strip... no
checking for strip... strip
configure: WARNING: using cross tools not prefixed with host triplet
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether ln -s works... yes
checking host platform characteristics... ok
checking for x86_64-w64-mingw32-gcc... no
checking for gcc... gcc
checking for x86_64-w64-mingw32-gcc... gcc
checking whether the C compiler works... no
configure: error: in `/tmp/yaourt-tmp-sensei/aur-wine-mono/src/wine-mono-0.0.4/build-cross-x86_64':
configure: error: C compiler cannot create executables
See `config.log' for more details
My config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by mono configure 2.11.1, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ../mono/configure --prefix=/home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/build-cross-x86_64-install --build=x86_64-unknown-linux-gnu --target=x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --with-tls=none --disable-mcs-build --enable-win32-dllmain=yes --with-libgc-threads=win32 PKG_CONFIG=false mono_cv_clang=no
## Platform. ##
hostname = archmage
uname -m = x86_64
uname -r = 3.3.8-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/core_perl
PATH: /home/sensei/Documents/Scripts
## Core tests. ##
configure:2970: checking build system type
configure:2984: result: x86_64-unknown-linux-gnu
configure:3004: checking host system type
configure:3017: result: x86_64-w64-mingw32
configure:3037: checking target system type
configure:3050: result: x86_64-w64-mingw32
configure:3099: checking for a BSD-compatible install
configure:3167: result: /usr/bin/install -c
configure:3178: checking whether build environment is sane
configure:3233: result: yes
configure:3292: checking for x86_64-w64-mingw32-strip
configure:3322: result: no
configure:3332: checking for strip
configure:3348: found /usr/bin/strip
configure:3359: result: strip
configure:3371: WARNING: using cross tools not prefixed with host triplet
configure:3384: checking for a thread-safe mkdir -p
configure:3423: result: /bin/mkdir -p
configure:3430: checking for gawk
configure:3446: found /usr/bin/gawk
configure:3457: result: gawk
configure:3468: checking whether make sets $(MAKE)
configure:3490: result: yes
configure:3565: checking how to create a ustar tar archive
configure:3578: tar --version
tar (GNU tar) 1.26
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3581: $? = 0
configure:3621: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar
configure:3624: $? = 0
configure:3628: tar -xf - <conftest.tar
configure:3631: $? = 0
configure:3644: result: gnutar
configure:3654: checking whether to enable maintainer-specific portions of Makefiles
configure:3663: result: no
configure:3680: checking whether ln -s works
configure:3684: result: yes
configure:3737: checking host platform characteristics
configure:4029: result: ok
configure:4090: checking for x86_64-w64-mingw32-gcc
configure:4120: result: no
configure:4130: checking for gcc
configure:4146: found /usr/bin/gcc
configure:4157: result: gcc
configure:4187: checking for x86_64-w64-mingw32-gcc
configure:4214: result: gcc
configure:4483: checking for C compiler version
configure:4492: gcc --version >&5
gcc (GCC) 4.7.0 20120505 (prerelease)
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:4503: $? = 0
configure:4492: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.7-20120505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-libstdcxx-time --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --with-linker-hash-style=gnu --disable-multilib --disable-libssp --disable-build-with-cxx --disable-build-poststage1-with-cxx --enable-checking=release
Thread model: posix
gcc version 4.7.0 20120505 (prerelease) (GCC)
configure:4503: $? = 0
configure:4492: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:4503: $? = 1
configure:4492: gcc -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:4503: $? = 1
configure:4523: checking whether the C compiler works
configure:4545: gcc -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -DWINVER=0x0500 -D_WIN32_WINNT=0x0500 -D_WIN32_IE=0x0501 -D_UNICODE -DUNICODE -DWIN32_THREADS -DFD_SETSIZE=1024 -DGC_NOT_DLL -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu -lmswsock -lws2_32 -lole32 -loleaut32 -lpsapi -lversion -ladvapi32 -lwinmm -lkernel32 conftest.c >&5
/usr/bin/ld: cannot find -lmswsock
/usr/bin/ld: cannot find -lws2_32
/usr/bin/ld: cannot find -lole32
/usr/bin/ld: cannot find -loleaut32
/usr/bin/ld: cannot find -lpsapi
/usr/bin/ld: cannot find -lversion
/usr/bin/ld: cannot find -ladvapi32
/usr/bin/ld: cannot find -lwinmm
/usr/bin/ld: cannot find -lkernel32
collect2: error: ld returned 1 exit status
configure:4549: $? = 1
configure:4587: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "mono"
| #define PACKAGE_TARNAME "mono"
| #define PACKAGE_VERSION "2.11.1"
| #define PACKAGE_STRING "mono 2.11.1"
| #define PACKAGE_BUGREPORT "http://bugzilla.xamarin.com/enter_bug.cgi?classification=Mono"
| #define PACKAGE_URL ""
| #define PACKAGE "mono"
| #define VERSION "2.11.1"
| #define HOST_WIN32 1
| #define DISABLE_PORTABILITY 1
| #define PLATFORM_NO_SYMLINKS 1
| #define TARGET_WIN32 1
| #define MINGW_CROSS_COMPILE 1
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:4592: error: in `/home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/build-cross-x86_64':
configure:4594: error: C compiler cannot create executables
See `config.log' for more details
## Cache variables. ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CCASFLAGS_set=
ac_cv_env_CCASFLAGS_value=
ac_cv_env_CCAS_set=
ac_cv_env_CCAS_value=
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXXFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_XMKMF_set=
ac_cv_env_XMKMF_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=x86_64-unknown-linux-gnu
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=x86_64-w64-mingw32
ac_cv_env_target_alias_set=set
ac_cv_env_target_alias_value=x86_64-w64-mingw32
ac_cv_host=x86_64-w64-mingw32
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_CC=gcc
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_make_make_set=yes
ac_cv_target=x86_64-w64-mingw32
am_cv_prog_tar_ustar=gnutar
mono_cv_clang=no
## Output variables. ##
ACLOCAL='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/missing --run aclocal-1.12'
ALPHA_FALSE=''
ALPHA_TRUE=''
AMD64_FALSE=''
AMD64_TRUE=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
API_VER='2.0'
AR=''
ARM_FALSE=''
ARM_TRUE=''
AS=''
AUTOCONF='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/missing --run autoconf'
AUTOHEADER='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/missing --run autoheader'
AUTOMAKE='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/missing --run automake-1.12'
AWK='gawk'
BOEHM_DEFINES=''
BUILD_EXEEXT=''
BUILD_GLIB_CFLAGS=''
BUILD_GLIB_LIBS=''
BUILD_MCS_FALSE=''
BUILD_MCS_TRUE=''
CC='gcc'
CCAS=''
CCASDEPMODE=''
CCASFLAGS=''
CCDEPMODE=''
CC_FOR_BUILD=''
CFLAGS='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
CFLAGS_FOR_BUILD=''
CPP=''
CPPFLAGS=' -DWINVER=0x0500 -D_WIN32_WINNT=0x0500 -D_WIN32_IE=0x0501 -D_UNICODE -DUNICODE -DWIN32_THREADS -DFD_SETSIZE=1024 -DGC_NOT_DLL'
CROSS_COMPILING_FALSE=''
CROSS_COMPILING_TRUE=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
CYGPATH_W='echo'
DEFS=''
DEPDIR=''
DISABLE_EXECUTABLES_FALSE=''
DISABLE_EXECUTABLES_TRUE=''
DISABLE_JIT_FALSE=''
DISABLE_JIT_TRUE=''
DISABLE_PROFILER_FALSE=''
DISABLE_PROFILER_TRUE=''
DISABLE_SHARED_HANDLES=''
DLLTOOL=''
DOLT_BASH=''
DSYMUTIL=''
DTRACE=''
DTRACEFLAGS=''
DTRACE_G_REQUIRED_FALSE=''
DTRACE_G_REQUIRED_TRUE=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DTRACE_FALSE=''
ENABLE_DTRACE_TRUE=''
ENABLE_LLVM_FALSE=''
ENABLE_LLVM_TRUE=''
ENABLE_NUNIT_TESTS_FALSE=''
ENABLE_NUNIT_TESTS_TRUE=''
EXEEXT=''
FGREP=''
GETTEXT_MACRO_VERSION=''
GLIB_CFLAGS=''
GLIB_LIBS=''
GMODULE_CFLAGS=''
GMODULE_LIBS=''
GMSGFMT=''
GMSGFMT_015=''
GREP=''
HAVE_MSGFMT=''
HAVE_OPROFILE_FALSE=''
HAVE_OPROFILE_TRUE=''
HAVE_ZLIB_FALSE=''
HAVE_ZLIB_TRUE=''
HOST_CC='gcc'
HOST_WIN32_FALSE='#'
HOST_WIN32_TRUE=''
HPPA_FALSE=''
HPPA_TRUE=''
IA64_FALSE=''
IA64_TRUE=''
INCLUDED_LIBGC_FALSE=''
INCLUDED_LIBGC_TRUE=''
INSTALL_4_0_FALSE=''
INSTALL_4_0_TRUE=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_MOBILE_FALSE=''
INSTALL_MOBILE_TRUE=''
INSTALL_MONODROID_FALSE=''
INSTALL_MONODROID_TRUE=''
INSTALL_MONOTOUCH_FALSE=''
INSTALL_MONOTOUCH_TRUE=''
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
INTERP_SUPPORTED_FALSE=''
INTERP_SUPPORTED_TRUE=''
INTL=''
JIT_SUPPORTED_FALSE=''
JIT_SUPPORTED_TRUE=''
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu -lmswsock -lws2_32 -lole32 -loleaut32 -lpsapi -lversion -ladvapi32 -lwinmm -lkernel32'
LIBC=''
LIBGC_CPPFLAGS=''
LIBGC_LIBS=''
LIBGC_STATIC_LIBS=''
LIBICONV=''
LIBMONO_LA=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIPO=''
LLVM_CFLAGS=''
LLVM_CONFIG=''
LLVM_CXXFLAGS=''
LLVM_LDFLAGS=''
LLVM_LIBS=''
LN_S='cp'
LOADED_LLVM_FALSE=''
LOADED_LLVM_TRUE=''
LTCOMPILE=''
LTCXXCOMPILE=''
LTLIBICONV=''
LTLIBOBJS=''
M68K_FALSE=''
M68K_TRUE=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/missing --run makeinfo'
MANIFEST_TOOL=''
MIPS_FALSE=''
MIPS_GCC_FALSE=''
MIPS_GCC_TRUE=''
MIPS_SGI_FALSE=''
MIPS_SGI_TRUE=''
MIPS_TRUE=''
MKDIR_P='/bin/mkdir -p'
MONO_DEBUGGER_SUPPORTED_FALSE=''
MONO_DEBUGGER_SUPPORTED_TRUE=''
MONO_DL_NEED_USCORE=''
MONO_NACL_ALIGN_MASK_OFF=''
MOONLIGHT_BOEHM_FALSE=''
MOONLIGHT_BOEHM_TRUE=''
MOONLIGHT_DEFINES=''
MOONLIGHT_FALSE=''
MOONLIGHT_SGEN_FALSE=''
MOONLIGHT_SGEN_TRUE=''
MOONLIGHT_TRUE=''
MSGFMT=''
MSGFMT_015=''
MSGMERGE=''
NACL_CODEGEN_FALSE=''
NACL_CODEGEN_TRUE=''
NM=''
NMEDIT=''
NO_VERSION_SCRIPT_FALSE=''
NO_VERSION_SCRIPT_TRUE=''
OBJDUMP=''
OBJEXT=''
ONLY_MOONLIGHT_FALSE=''
ONLY_MOONLIGHT_TRUE=''
OPROFILE_CFLAGS=''
OPROFILE_LIBS=''
OTOOL64=''
OTOOL=''
PACKAGE='mono'
PACKAGE_BUGREPORT='http://bugzilla.xamarin.com/enter_bug.cgi?classification=Mono'
PACKAGE_NAME='mono'
PACKAGE_STRING='mono 2.11.1'
PACKAGE_TARNAME='mono'
PACKAGE_URL=''
PACKAGE_VERSION='2.11.1'
PATH_SEPARATOR=':'
PKG_CONFIG='false'
PLATFORM_ANDROID_FALSE=''
PLATFORM_ANDROID_TRUE='#'
PLATFORM_DARWIN_FALSE=''
PLATFORM_DARWIN_TRUE='#'
PLATFORM_LINUX_FALSE=''
PLATFORM_LINUX_TRUE='#'
PLATFORM_SIGPOSIX_FALSE=''
PLATFORM_SIGPOSIX_TRUE='#'
POWERPC64_FALSE=''
POWERPC64_TRUE=''
POWERPC_FALSE=''
POWERPC_TRUE=''
RANLIB=''
S390_FALSE=''
S390_TRUE=''
S390x_FALSE=''
S390x_TRUE=''
SED=''
SET_MAKE=''
SGEN_DEFINES=''
SHARED_MONO_FALSE=''
SHARED_MONO_TRUE=''
SHELL='/bin/sh'
SPARC64_FALSE=''
SPARC64_TRUE=''
SPARC_FALSE=''
SPARC_TRUE=''
SQLITE3=''
SQLITE=''
STATIC_MONO_FALSE=''
STATIC_MONO_TRUE=''
STRIP='strip'
SUPPORT_BOEHM_FALSE=''
SUPPORT_BOEHM_TRUE=''
SUPPORT_SGEN_FALSE=''
SUPPORT_SGEN_TRUE=''
TARGET_WIN32_FALSE='#'
TARGET_WIN32_TRUE=''
USE_BATCH_FILES_FALSE=''
USE_BATCH_FILES_TRUE=''
USE_JIT_FALSE=''
USE_JIT_TRUE=''
USE_NLS=''
VERSION='2.11.1'
X11=''
X86_FALSE=''
X86_TRUE=''
XATTR_LIB=''
XGETTEXT=''
XGETTEXT_015=''
XGETTEXT_EXTRA_OPTIONS=''
XMKMF=''
ac_ct_AR=''
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCCAS_FALSE=''
am__fastdepCCAS_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include=''
am__isrc=' -I$(srcdir)'
am__leading_dot='.'
am__nodep=''
am__quote=''
am__tar='tar --format=ustar -chf - "$$tardir"'
am__untar='tar -xf -'
arch_target=''
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias='x86_64-unknown-linux-gnu'
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
docs_dir=''
dvidir='${docdir}'
exec_prefix='NONE'
export_ldflags=''
host='x86_64-w64-mingw32'
host_alias='x86_64-w64-mingw32'
host_cpu='x86_64'
host_os='mingw32'
host_vendor='w64'
htmldir='${docdir}'
ikvm_native_dir=''
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
libgc_dir=''
libgdiplus_loc=''
libmono_cflags='-mno-cygwin -mms-bitfields -mwindows'
libmono_ldflags='-mno-cygwin -mms-bitfields -mwindows'
libsuffix=''
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mcs_topdir=''
mcs_topdir_from_srcdir=''
mkdir_p=''
mono_build_root=''
mono_cfg_dir=''
mono_runtime=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/build-cross-x86_64-install'
program_transform_name='s&^&x86_64-w64-mingw32-&'
psdir='${docdir}'
reloc_libdir='lib'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
subdirs=''
sysconfdir='${prefix}/etc'
target='x86_64-w64-mingw32'
target_alias='x86_64-w64-mingw32'
target_cpu='x86_64'
target_os='mingw32'
target_vendor='w64'
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "mono"
#define PACKAGE_TARNAME "mono"
#define PACKAGE_VERSION "2.11.1"
#define PACKAGE_STRING "mono 2.11.1"
#define PACKAGE_BUGREPORT "http://bugzilla.xamarin.com/enter_bug.cgi?classification=Mono"
#define PACKAGE_URL ""
#define PACKAGE "mono"
#define VERSION "2.11.1"
#define HOST_WIN32 1
#define DISABLE_PORTABILITY 1
#define PLATFORM_NO_SYMLINKS 1
#define TARGET_WIN32 1
#define MINGW_CROSS_COMPILE 1
configure: exit 77
My makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
#DLAGENTS=('ftp::/usr/bin/wget -4 -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
# 'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
# 'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
#Curl as default DLAGENT
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/curl
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Exclusive: will only run on x86_64
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
I am running a x64 arch with multilib and multilib-testing enabled. This is the first time I have encountered this error. Thank you in advance for all advice and suggestions.
Edited: added makepkg.conf
Last edited by mynameisneo (2012-06-13 19:04:09)

In your config.log:
/usr/bin/ld: cannot find -lmswsock
/usr/bin/ld: cannot find -lws2_32
/usr/bin/ld: cannot find -lole32
/usr/bin/ld: cannot find -loleaut32
/usr/bin/ld: cannot find -lpsapi
/usr/bin/ld: cannot find -lversion
/usr/bin/ld: cannot find -ladvapi32
/usr/bin/ld: cannot find -lwinmm
/usr/bin/ld: cannot find -lkernel32
Try find these files which package provides!
Edit: maybe package 'wine' provides this but as I see these libs are in /usr/lib/wine.
Last edited by uzsolt (2012-06-13 18:07:08)

Cannot Create ShrePoint Search Service Application for SP2013

Hi All,
Thanks in advance for any help you may provide.
While Creating a new search service application i have received the following error:
Errors were encountered during the configuration of the Search Service Application.
System.ArgumentException: The SDDL string contains an invalid sid or a sid that cannot be translated. Parameter name: sddlForm at System.Security.AccessControl.RawSecurityDescriptor.BinaryFormFromSddlForm(String sddlForm) at System.Security.AccessControl.RawSecurityDescriptor..ctor(String
sddlForm) at Microsoft.SharePoint.Win32.SPNetApi32.CreateShareSecurityDescriptor(String[] readNames, String[] changeNames, String[] fullControlNames, String& sddl) at Microsoft.SharePoint.Win32.SPNetApi32.CreateFileShare(String name, String description,
String path) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.CreateAnalyticsUNCShare(String dirParentLocation, String shareName) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.ProvisionAnalyticsShare(SearchServiceApplication
serviceApplication) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.CreateDefaultStoreLocation(SearchServiceApplication serviceApplication) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.ProvisionRawEventStore(SearchServiceApplication
serviceApplication) at
The Fix with Sharing the Analitics_GUID Folder doesn't work, because it creates every Time a new one.
I really appreciate if you could give me a help.
Regards!
Martin

Hi all,
Thank you very much for your Response.
I have resolve this Issue yesterday, but didn't have time to answer.
I have tried everything (Create over Powershell and GUI) and as I say the fix with Analitics_GUID dont work. I have give everyone Full Controll on the hole Office Folder and Sub-folders.
I have look with the Reflector in the Code that causes the Exception and find that the SDDL string need some format in
that has an Domain Account and not Local Account. I mean some SID Domain ids.
So there is no way to create an "Complete" Installation ( not Standalone) without having a Domain. It is possible but you cannot create Search Service App and some
other Components didn't work as expected.
My Software was:
Windows Server 2012 Datacenter
SQL Server 2012 Enterprise with SP1
SharePoint 2013 Enterprise
So I created a "local" domain an it works.
Thank you very much
Regards
Martin

Cannot create a new Offline Address Book

I have 2 instances of Exchange Server installation in one single organisation (by one per domain):
1. Exchange 2010 Version 14.3 (Build 123.4).
2. Echange 2013 Version 15.0 (Build 1044.25).
I have created new OAB and arbitration mailbox following
this article.
It is result of command:
[PS] C:\Windows\system32>Get-Mailbox -Arbitration | where {$_.PersistedCapabilities -like "*oab*"} | ft name,servername
Name ServerName
BK Arbitration OAB vsrv-exbk
But when i try generate new OAB using command:
Update-OfflineAddressBook -Identity "OAB-FAB"
I get this error message:
Не удалось создать автономную адресную книгу "\OAB-FAB". Это может быть вызвано двумя причинами: служба помощников по обслуживанию почтовых ящиков не
запущена на сервере "SRV-MAILBOX.xxx.local" или у вас нет разрешений на выполнение этой операции. Сообщение об ошибке: "Не удается вызвать службу по
мощников по обслуживанию почтовых ящиков на сервере. 'SRV-MAILBOX.xxx.local': сбой. Ошибка RPC: -2147220990.".
+ CategoryInfo : InvalidResult: (OAB-FAB:OfflineAddressBookIdParameter) [Update-OfflineAddressBook], LocalizedException
+ FullyQualifiedErrorId : [Server=VSRV-EXBK,RequestId=84bb0fb1-d6dd-4718-a704-4e9a20e178b6,TimeStamp=19.02.2015 12:07:00] [FailureCategory=Cmdle
t-LocalizedException] 12FE7FE1,Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateOfflineAddressBook
+ PSComputerName : vsrv-exbk.xxx.local
Roughly translation from Russian is - "Cannot create a new Offline Address Book
"\OAB-FAB" This may be caused to two reasons: the service "Mailbox Assistant service." did not started on "SRV-MAILBOX.xxx.local"
server or you do not have permission to perform this operation.
I investigated this situation and found out that i have "Organisation Management" role on my account, and "Mailbox Assistant service." is started on server "SRV-MAILBOX.xxx.local".
I try to restart the service but it does not fix this issue.
Please help me ;)

Hi,
How did you create a new OAB and an OAB Generation Mailbox? When creating new OABs after Exchange CU5, we need to specify the GeneratingMailbox property.
For example:
New-Mailbox -Arbitration -Name "BK Arbitration OAB" -Database DB4 -UserPrincipalName [email protected] –DisplayName " BK Arbitration OAB"
Set-Mailbox "BK Arbitration OAB" –Arbitration –OABGen $true
New-OfflineAddressBook -Name "OAB-FAB" –GeneratingMailbox "CN= BK Arbitration OAB,CN=Users,DC=contoso,DC=com" –AddressLists "Default Global Address List"
For more information, please refer to this article.
http://blogs.technet.com/b/exchange/archive/2014/05/13/oab-improvements-in-exchange-2013-cumulative-update-5.aspx
Best Regards.

[SOLVED]C compiler cannot create executables DUE TO MISSING DEV. PACKS

Hi there, I was trying to build "lib32-libpcap" from AUR using yaourt when the gcc(?) reported an error as following:
==> Starting build()...
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... gcc -m32
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
==> ERROR: A failure occurred in build().
Aborting...
The content of the "config.log" file:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --enable-ipv6
## Platform. ##
hostname = mzws
uname -m = x86_64
uname -r = 3.2.8-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/core_perl
## Core tests. ##
configure:1794: checking build system type
configure:1812: result: x86_64-unknown-linux-gnu
configure:1834: checking host system type
configure:1849: result: x86_64-unknown-linux-gnu
configure:1871: checking target system type
configure:1886: result: x86_64-unknown-linux-gnu
configure:2036: checking for gcc
configure:2063: result: gcc -m32
configure:2301: checking for C compiler version
configure:2308: gcc -m32 --version >&5
gcc (GCC) 4.6.2 20120120 (prerelease)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2311: $? = 0
configure:2318: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.6-20120120/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-libstdcxx-time --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --disable-multilib --disable-libssp --enable-checking=release
Thread model: posix
gcc version 4.6.2 20120120 (prerelease) (GCC)
configure:2321: $? = 0
configure:2328: gcc -m32 -V >&5
gcc: error: unrecognized option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:2331: $? = 1
configure:2354: checking for C compiler default output file name
configure:2381: gcc -m32 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu conftest.c >&5
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/libgcc.a when searching for -lgcc
/usr/bin/ld: cannot find -lgcc
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/../../../libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: skipping incompatible /usr/lib/libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: cannot find -lgcc_s
collect2: ld returned 1 exit status
configure:2384: $? = 1
configure:2422: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2429: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_target=x86_64-unknown-linux-gnu
## Output variables. ##
ADDLARCHIVEOBJS=''
ADDLOBJS=''
BT_SRC=''
CAN_SRC=''
CC='gcc -m32'
CFLAGS='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
CPP=''
CPPFLAGS=''
DEFS=''
DYEXT=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
GREP=''
HAVE_LINUX_TPACKET_AUXDATA=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu'
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAN_FILE_FORMATS=''
MAN_MISC_INFO=''
OBJEXT=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PCAP_SUPPORT_BT=''
PCAP_SUPPORT_CAN=''
PCAP_SUPPORT_USB=''
RANLIB=''
SHELL='/bin/sh'
SHLICC2=''
SSRC=''
USB_SRC=''
V_CCOPT='-O'
V_DEFS=''
V_FINDALLDEVS=''
V_INCLS=''
V_LEX=''
V_PCAP=''
V_RPATH_OPT=''
V_SHLIB_CMD=''
V_SHLIB_OPT=''
V_SONAME_OPT=''
V_YACC=''
ac_ct_CC='gcc -m32'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='x86_64-unknown-linux-gnu'
target_alias=''
target_cpu='x86_64'
target_os='linux-gnu'
target_vendor='unknown'
## confdefs.h. ##
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
configure: exit 77
and the makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Am running a up-to-date x64 Arch with [multilib] enabled; perhaps it's a silly mistake I made somewhere but I'm no dev and so cannot figure out what went wrong in the config.log....please help with your kindness and thanks in advance!
Last edited by karbon (2012-03-10 04:28:58)

Thanks for your replies:)
Allan wrote:Are you really up-to-date? gcc-4.6.3 was put in [core] four days ago but you still seem to have 4.6.2.
Well...at least as up-to-date as on March 2nd(when I did last system-wide upgrade); trying to update system tonight to see whether this works.
stronnag wrote:If you have multilib and testing enabled, you also need multilib-testing, otherwise (as I know from bitter experience), you get these hard to track down errors.
Nope I didn't enable [testing]; I've discovered some packages in [multilib], namely gcc-multilib or something similar(with the -multilib subfix) and some of these packages belong to the group "multilib-devel". Is installing these packages a must for compiling 32-bit packages?

Application cannot create needed files

I have searched under this heading but Firefox brought up 1000 articles and I gave up after going through 10 pages, as none seemed relevant.
I was trying to open my GIO "Virtual Safe" file, which allows me to list all my contents for insurance purposes, by where they are in the house and what category they fall into, and includes costs and photos, and also totals all entries to a final figure. I am sorry but I am not sure what type of file or program it is, but hopefully someone who sees this question will know "Virtual Safe". Anyway, I got a pop-up - "This application cannot start as it cannot create needed files. There may not be enough free disc space".
I don't see how the last sentence can apply, as I am only using about 140 GB on a 1 TB disc. Also, subsequent checks (see after this) make me question whether the problem is related to the Virtual Safe program at all.
A short time after this problem surfaced I received a pop-up to say that there was an update to Apache Open Office, which I downloaded. When I tried to open the application file to update Open Office I got a pop-up - "Error! Can't initialize plug-ins directory. Please try again later". I then searched and found the Mozilla help file "Re-initiallizing the plugins database", and other files as well, and followed their instructions. Firstly I changed all my plugins to "Never Activate" as suggested, but it made no difference. So I changed them all back to "Always activate".
I then deleted the pluginreg.dat file as suggested, but it made no difference, so I reinstated that.
By this time I began to wonder whether I would be able to open any application file, so out of interest I tried to open a few more application files from my downloads. None would open and I got various pop-up messages when I tried. For some reason they weren't all the same.
i.e. "Can not create temp folder archive"; and "Failed to download file"; and ""Setup was unable to create the directory "C:\Users\owner\AppData\Local\Temp\is-TTSU7.tmp". Error 5: Access is denied"".
Can anyone help me?
Thanks,
Barry

hey barry, when you google that error message, it seems to appear for all kinds of different software & it appears that it is caused by something corrupting the system environment. you might want to try the tip here: http://www.windowsbbs.com/windows-7/106826-adobe-reader-wont-install-windows-7-64-bit.html#post618612 or starting the system in safemode and scanning for malware. but again, any more detailed help regarding this issue is probably outside the scope of this forum :-/

Power View error: Cannot create a connection to data source 'EntityDataSource'

I have Power View on SharePoint 2013. I have both Multidimentional and Tabular model in use.
I have several Report.drlx file in Report libary in SharePoint.
My colleague is getting following error when building report by dragging Facts and Dimentions to report.
On the hand, I'm not receiving error.
Error is cannot create a connection to data source 'EntityDataSource'
<detail><ErrorCode xmlns="rsErrorOpeningConnection</ErrorCode><HttpStatus">http://www.microsoft.com/sql/reportingservices">rsErrorOpeningConnection</ErrorCode><HttpStatus
xmlns="400</HttpStatus><Message">http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="Cannot">http://www.microsoft.com/sql/reportingservices">Cannot
create a connection to data source 'EntityDataSource'.</Message><HelpLink xmlns="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=12.0.2000.8</HelpLink><ProductName">http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=12.0.2000.8</HelpLink><ProductName
xmlns="Microsoft">http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="12.0.2000.8</ProductVersion><ProductLocaleId">http://www.microsoft.com/sql/reportingservices">12.0.2000.8</ProductVersion><ProductLocaleId
xmlns="1033</ProductLocaleId><OperatingSystem">http://www.microsoft.com/sql/reportingservices">1033</ProductLocaleId><OperatingSystem xmlns="OsIndependent</OperatingSystem><CountryLocaleId">http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="1033</CountryLocaleId><MoreInformation">http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="<Source>Microsoft.ReportingServices.ProcessingCore</Source><Message">http://www.microsoft.com/sql/reportingservices"><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message
msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=12.0.2000.8"
xmlns:msrs="Cannot">http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.AdomdClient</Source><Message></Message><MoreInformation><Source>Microsoft.SharePoint</Source><Message>Could
not retrieve a valid Windows identity.</Message><MoreInformation><Source>mscorlib</Source><Message>WTS0003: The caller is not authorized to access the service.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Kenny_I

Hi Kenny_I,
As per my understanding, I think this issue may be caused by your colleague has no permission to access to data source 'EntityDataSource', it is a Kerberos issue. When report server uses ‘Windows authentication (integrated) or SharePoint user’ as the credentials
to access the data source 'EntityDataSource', the authentication would be failed. So we should try to check if the issue is in this scenario. If in this case, we should change the credentials to stored credentials.
Besides, if we don’t configure C2WTS Service Account to use Local System, it needs the following local policy rights:
Act as part of the operating system.
Impersonate a client after authentication.
Log on as a service.
For more details, please refer to the following blog:
http://www.codeovereasy.com/2014/01/powerview-report-fails-no-credentials-are-available-in-the-security-package/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot create local iDisk

Similar Messages

Maybe you are looking for