Cannot create new planning app following installation of 9.3.1

Hi,
I have installed planning including epma. I have registered everything with HSS and have created a data source through the config tool. However, I cannot see how to create a new app through workspace and planning is not listed as a project in HSS. I have created the sql repository etc
Has anyone seen this before?
Thanks,
Nathan

Hi,
First of all there will not be a project in HSS, you can manually create one and call it whatever you like.
Have you granted shared service roles :- Dimension editor and Application Creator.
If you have and configured correctly you should be able to create an application through workspace > Navigate > Administer > Classic Application Administration > Planning Administration
You should be also able to access planning directly to create an application :- http://<planning machine>:8300/HyperionPlanning/AppWizard.jsp
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

V11.1.2.1: Cannot create new application - Cannot create connection to db

Hi,
I have installed Hyperion Planning + essbase + FDM v11.1.2.1 in a distributed environment on Windows 2008 R2 64-bit servers.
All configurations is set up with no problems, have created users, planning apps etc etc. Only thing missing is creating the FDM apps however this fails!
The folders are created on the FDM app server but it cannot connect to the oracle db it says. No error number is given.
I have no problems accessing the oracle db via sqlplus with the same user/password info.
And I cant find any log file that contains any errors so I am at a loss as to what can be the problem!?
BR
Soren

Check out KM document
Unable to Create FDM Application From Workbench Client on Windows 2008 R2 (Doc ID 1324303.1)
This will provide the solution to the issue.

Cannot create new folders in Outlook

I just bought a new PC computer. I installed MSFT Office Professional Plus 2010. I opened Outlook and added in (i) the pst folder I had set up from my previous Vista
computer (also with Outlook 2010), (ii) my hotmail account, (iii) my at&t/yahoo account and (iv) my gmail account. I cannot create new folders in any of them.
When I right click anywhere in the navigation pane and select "New Folder..." I get the following error message:
"Outlook cannot read the registry information.
-Close and restart Outlook.
-Reinstall Outlook
-Reinstall Microsoft Exchange or other e-mail system."
I tried all three, including removing and reinstalling Office and removing all of the email accounts/pst files and re-adding and still have the problem.
If I try to right-click properties on any of the accounts, I get the same error message, with the following additional language first:
"Cannot display 'General' page. This page will remain visible, but is not available."
Not sure what is left to try.
Appreciate any ideas.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, If the PC from clean install, you can follow these steps to test this issue.
1.
Start the Outlook in safe mode,
Press and hold the CTRL key,
and then click Outlook.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them.
2.
Create a New profile & PST file to test this issue
If this problem does not occur in the new Outlook profile & PST, the old Outlook profile is corrupted. We can delete that and use a new Outlook profile.
3.
Make sure the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
key permissions to allow full permissions to all users
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  How
to back up and restore the registry in Windows
a)
Exit Outlook if it is running.
b)
Click
Start, and then click Run. Copy and paste (or type) the following command in the
Open box, and then press ENTER: regedit
c)
Locate and select the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
d)
On the
Edit menu, click Permissions.
e)
Click the registry key for the user who is currently logged on, and ensure that
Read and Full Control permissions are both set to
Allow.
f)
Click the Advanced button, ensure that the user who is currently logged on is selected, that
Full Control is listed in the Permissions
column, and that This Key and Subkeys is listed in the
Apply to column.
g)
Click to select the Replace permission entries on all child objects with entries shown here that apply to child objects check box, and clear
the check box
Windows 7: Include inheritable permissions from this
object’s parent
Windows XP: Inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here.
h)
When you are prompted to continue, click Remove.
i)
Click Apply, and then click Yes when you are prompted to continue.
j)
Click OK, and then click OK again.
k)
On the Registry menu, click Exit.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Creating new planning application

Hi All,
i am try to create new planning apllication where i could'nt understand the significance of plan types. can anyone guide to get to know.
thanks,
varatharaj kannan

A plan type is basically an essbase database, you create them based on the model you are building, if the design cannot accommodate one database then you have the option to use additional databases (plan types)
You cannot add/delete plan types once the application is created though.
Cheers
John
http://john-goodwin.blogspot.com/

Cannot create new LWP?

To test my Server process, I make a Client process to send numerous requests by creating one-connection-one-thread.
Under same amount of connections (such as 50 connections), indefinitely, the process will be error as follow:
libthread panic: cannot creat new LWP (PID:XXX LWP 2) stacktrace:XXXXXX
my question is:
If there are limits of LWP in a process?
I use unbound thread and let the kernel to balance threads between LWP, must I use bound thread?

I've seen this when my program used a lot of file descriptors. Using truss I could see that a call to open /dev/zero failed and a libthread panic message was displayed. Try using the ulimit command to increase your limit on open files.

Cannot create new folder?

I have just moved to a new hosting and have connected to it
and I can edit files. When I try to add a folder to the remove I'll
get
"An FTP error occured - cannot create new folder .
Access denied. The file may not exist or there could be a
permission problem".
Any idea?

Hi,
Did you make any changes before the issue appears?
Before going further, you may try the
system restore to go back to a previous status and check the result.
Tracy Cai
TechNet Community Support

Cannot Create New Mailbox

Hi all,
First of all I already create a similar thread : http://social.technet.microsoft.com/Forums/en-US/b8f88745-ca79-43f9-8857-3b87781e5c19/rbac-to-create-mailbox?forum=exchangesvradmin
I got a problem in my Exchange Server 2013 environment. I cannot create new mailbox (new user) from ECP. But I can create new mailbox and choose existing user.
Active Directory operation failed on DC.mydomain.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031A121F, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
already try with no luck :
re-inherit the permission.
setup /prepareAD
I create new user and assign Org Management & Domain Admin
how to check whether the permission in my AD is correct ? or any idea should I start troubleshooting ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

solved by executing setup.exe /preparedomain
and I found one of the server in container ADSIEdit were disabled inheritance. execute setup.exe /prepareAD, reboot the server (because it
ask for it), then execute setup.exe /preparedomain
cheers ! :)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

BO4 - cannot create new universe connections

Hi,
In Universe Design Tool, trying to create new universe connections but not allowing this.
Doesn't show all the data access drivers we have installed.
Can migrate connections fine from XIR2 fine and reports run O.K
Why cannot create new universe connections
Many Thanks

Hi,
there are some notes about this in the knowldge base. Here are a couple:
For ODBC, Note 1272557 - Data Access Drivers missing while creating a new connection in Designer
for JDBC, Note 1481410 - JDBC Drivers do not appear in the List Of Drivers when Creating a New Universe Connection in Universe Designer
Can you hit www.service.sap.com/notes to look them up?
Regards,
H

After upgrade to 6.3.4 cannot create new bookmarks by dragging nor open existing bookmark properties

Just upgraded to 3.64. Now I cannot create new bookmarks either by dragging a URL or trying to create a new one in organize bookmarks. For existing bookmarks when I hit properties on the pop up menu all I get is a title bar that says "bookmark properties for (name of bookmark)" but I can't resize it or otherwise manipulate the title bar to access information or change the properties

Hello Victor.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

HT5577 i bought recently a second hand apple i phone 4s but now i cannot creat new apple id

i bought recently a second hand apple i phone 4s but now i cannot creat new apple id .

I suspect you're referring to the 3 free iCloud account limit on an iOS device. If so, there's no way around this. Once that limit is reached, you'll have to create the iCloud account on another iOS device or computer, then setup that account on your phone.

AME iExpenses: Cannot create new approver group

We need to set up approver groups for iExpenses. I assigned myself Approvals Management Administrator and Aprovals Management Business Analyst roles. With these roles I can create new attributes and conditions. However, I cannot create new action types and approval groups. The create button for the approval group just does nothing.
What am I missing? We are 11.5.10.2, AME.B

Pl see if ML Doc 420387.1 (How to Create the Approval Transaction Type for AME.B or higher ?) can help
HTH
Srini

Create new planning layout - KE11

Hi everybody,
I'm trying to use the tcode KE11 but I don't know how can I create new planning layout for sales and proft plan.
Anybody can help me?
Thanks & Regards

Hi,
Use T.code KE14 to create a Planning layout.
Hope this helps.

Cannot Create New/Repy To/Forward e-Mail Messages

I have an iPhone 3G with the latest version of OS 4.x and about a week or so ago, the mail app stopped having the functionality to create new e-mails when I tap on the envelop in the bottom right of the screen; the icon highlights for a second but no new email screen opens up. I also cannot use the arrows to reply to or forward an already open e-mail. If I am in the Contacts app and select the button to send an e-mail, it opens the mail app, but only to the inbox not a new e-mail screen.
I have two e-mail accounts on this phone -- one is for gmail and one is a work e-mail account set up through Exchange; I am receiving e-mail and my work contacts and calendar just fine, but I am increasingly frustrated that I cannot send e-mail since that is 45% of what I use the phone for.
Please help!

Hi,
I'm afraid we can't create a transport rule to filter user based on the user's OU.
To work around this issue, you can use the following command to get the organizational unit first, then you find the right e-mail address which you want to forward to. After that, you can create a transport rule to forward these messages from X sender to
this specific email address.
Get-Mailbox -Identity mailbox | fl Name, OrganizationalUnit
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Can't create new Mobile App on preview portal

Hi all,
I'm really excited about the new Mobile App feature in the preview portal and want to get started on something. I went to the portal, clicked in to create a new Mobile App and entered the name and service plan then clicked create. The dots started blinking
and then nothing happened. I've tried it in Safari, Chrome, and IE with the same results. I've tried it with private and non-private browsing. My account is a Partner subscription that allows $100/month in Azure credits. Has anyone else had this problem? Any
idea how to mitigate it and get to coding my new mobile app? Thanks for any help!
jared

The restriction has been removed. You should be able to use any valid name for your resource group now.
I was unable to create a mobile app using the defaults. I had to create a new service plan and Resource group.
Also, the docs on resource groups give me a 404. I have no idea what a resource group or service plan even are.

Cannot create new virtual network adapter on logical switch team

I am currently moving from Hyper-V 2012 to Hyper-V 2012 R2 and in turn I have just installed SCVMM 2012 R2. I am using SCVMM 2012 R2 to create some NIC teams which I have done no problem in the past with SCVMM 2012 SP1. Now we have everything set up just
like we did in the past and it seems to create the NIC team just fine. The problem is when I try to create a New Virtual Network Adapter, when I click the button, it immediately says:
VMM cannot create the virtual network adapter. Either there are no VM networks associated with the network sites that the uplink port profile "Logical Network Name" Connects to, or the VM networks associated with those network sites all use Hyper-V
network virtualization.
Now I've checked and the VM Network is assigned to the logical network that is associated with the Network Site that contains the host I'm working with. I've also tried disabling Hyper-V network virtualization but that didn't change anything and I thought
that it's always enabled on 2012 R2 anyway.
I would like to gain network connectivity to this team at least for testing purposes and we also are planning on building a Hyper-V cluster. Were some new restrictions added in 2012 R2 to prevent creating virtual network adapters in this scenario or am I
doing something wrong?
Any information would be helpful. Thank you in advance for your time!

Hi Sir,
Glad to hear that the problem has been solved , thanks for your sharing .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Cannot create new planning app following installation of 9.3.1

Similar Messages

Maybe you are looking for