Cannot create new Solution

Hello.
I've a new installed and patched Solution Manager 7.1 stack level 10.
I'm trying to create a new Solution from workcenter SolutionManagerAdministration.
Using NEW button , I fill the pop up with the new solution name, default language left English) and then OK.
A log message appears on the left upper corner asserting that "Creation of Solution xxxx with language E was successfull".
But the solution doesn't appear in the list , same in SMSY. If I try to create it again , using the identical name, I get the same message, so it seems that the message doesn't say the truth.But nevertheless no solution is really created.
I tried another way: copy the existing default solution into a new one. In this case the new solution appears in the list, but when I go to SMSY to assign a logical component, as soon I select the solution I get a message in the status bar:
"The solution XXXX has not yet been migrated to solution directory"
Diagnosis
The solution XXXX must first be transferred to the solution directory
Procedure
Call up transaction Solution_Manager and in the overview of active solutions, select the Add to Solution Directory icon (last column)
Unfortunately the transaction SOLUTION_MANAGER is no more active in this version....
Does anybody know why the creation is uneffective, an what the last message means , or what has to be done?
Thanks a lot
Dino

Hi Dino,
In SM 7.1 even SMSY also obsolete, it has only display view, future this also not possible.
Now regarding your error,
Since you are saying your solman_directory shows only sap_solution, means you have nt done the migration activities in the solman_Setup
Make sure, you completed all the steps in System preparation and basic configuration in SOLMAN_SETUP, specially all the task on STEP 6 Prepare landscape description inside 6.2 SETUP LMDB , inside the small button "Migrate technical systems from smsy"
and 6.3 migrate logical component from smsy
once all these steps are green, you wont get any migration error.
Please check.
Thanks
Jansi

Similar Messages

Solution_Manager cannot create new solution

Hi everyone,
I'm having problem with the transaction code SOLUTION_MANAGER.
When I access this transaction code, I should be able to click NEW button to create new solution.
What happen is as follow:
1. I click on NEW button.
2. I can enter SOLUTION NAME and LANGUAGE.
3. However, when I click CONTINUE, there is no response.
3.1 By right, I should be able to access a new screen and key in details of my landscape/solution. But for my solman, it is not working.
Any advice?
Thank you.
Regards

Hi all,
I didn't realize that my problem is quite common; and after reading all the thread and snote, my problem is exactly as was describe. I'll try the solution provided.
Thank you for the help
Regards.

How to create new solution from Existing solution in integration services on TFS project?

Hi,
I am working on SSIS Project and it is created in VS 2008 .I opened the solution in VS 2010 and it is upgraded and unfortynately i don't have the back up to re open it in VS 2008.I am thinking of creating new solution from the existing one and open the new
solution in VS 2008.I was struck how can we copy existing solution to new solution on TFS.
Please let me know will this process work? and also how can we create a new solution without losing any files.
Any help is appreciated.

Hi moh1kumr,
As Joost said, you can try to revert the changes back for the checked in files in TFS. For more information, please see:
http://msdn.microsoft.com/en-us/library/ee371161(v=expression.40).aspx
http://stackoverflow.com/questions/2694644/how-to-revert-roll-back-a-checkin-in-tfs-2010
If it doesn’t work, I am afraid you have to design the package in VS 2008 from scratch.
Regards,
Mike Yin
TechNet Community Support

Cannot create new folders in Outlook

I just bought a new PC computer. I installed MSFT Office Professional Plus 2010. I opened Outlook and added in (i) the pst folder I had set up from my previous Vista
computer (also with Outlook 2010), (ii) my hotmail account, (iii) my at&t/yahoo account and (iv) my gmail account. I cannot create new folders in any of them.
When I right click anywhere in the navigation pane and select "New Folder..." I get the following error message:
"Outlook cannot read the registry information.
-Close and restart Outlook.
-Reinstall Outlook
-Reinstall Microsoft Exchange or other e-mail system."
I tried all three, including removing and reinstalling Office and removing all of the email accounts/pst files and re-adding and still have the problem.
If I try to right-click properties on any of the accounts, I get the same error message, with the following additional language first:
"Cannot display 'General' page. This page will remain visible, but is not available."
Not sure what is left to try.
Appreciate any ideas.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, If the PC from clean install, you can follow these steps to test this issue.
1.
Start the Outlook in safe mode,
Press and hold the CTRL key,
and then click Outlook.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them.
2.
Create a New profile & PST file to test this issue
If this problem does not occur in the new Outlook profile & PST, the old Outlook profile is corrupted. We can delete that and use a new Outlook profile.
3.
Make sure the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
key permissions to allow full permissions to all users
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  How
to back up and restore the registry in Windows
a)
Exit Outlook if it is running.
b)
Click
Start, and then click Run. Copy and paste (or type) the following command in the
Open box, and then press ENTER: regedit
c)
Locate and select the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
d)
On the
Edit menu, click Permissions.
e)
Click the registry key for the user who is currently logged on, and ensure that
Read and Full Control permissions are both set to
Allow.
f)
Click the Advanced button, ensure that the user who is currently logged on is selected, that
Full Control is listed in the Permissions
column, and that This Key and Subkeys is listed in the
Apply to column.
g)
Click to select the Replace permission entries on all child objects with entries shown here that apply to child objects check box, and clear
the check box
Windows 7: Include inheritable permissions from this
object’s parent
Windows XP: Inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here.
h)
When you are prompted to continue, click Remove.
i)
Click Apply, and then click Yes when you are prompted to continue.
j)
Click OK, and then click OK again.
k)
On the Registry menu, click Exit.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Cannot create new folder?

I have just moved to a new hosting and have connected to it
and I can edit files. When I try to add a folder to the remove I'll
get
"An FTP error occured - cannot create new folder .
Access denied. The file may not exist or there could be a
permission problem".
Any idea?

Hi,
Did you make any changes before the issue appears?
Before going further, you may try the
system restore to go back to a previous status and check the result.
Tracy Cai
TechNet Community Support

Cannot Create New Mailbox

Hi all,
First of all I already create a similar thread : http://social.technet.microsoft.com/Forums/en-US/b8f88745-ca79-43f9-8857-3b87781e5c19/rbac-to-create-mailbox?forum=exchangesvradmin
I got a problem in my Exchange Server 2013 environment. I cannot create new mailbox (new user) from ECP. But I can create new mailbox and choose existing user.
Active Directory operation failed on DC.mydomain.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031A121F, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
already try with no luck :
re-inherit the permission.
setup /prepareAD
I create new user and assign Org Management & Domain Admin
how to check whether the permission in my AD is correct ? or any idea should I start troubleshooting ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

solved by executing setup.exe /preparedomain
and I found one of the server in container ADSIEdit were disabled inheritance. execute setup.exe /prepareAD, reboot the server (because it
ask for it), then execute setup.exe /preparedomain
cheers ! :)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

BO4 - cannot create new universe connections

Hi,
In Universe Design Tool, trying to create new universe connections but not allowing this.
Doesn't show all the data access drivers we have installed.
Can migrate connections fine from XIR2 fine and reports run O.K
Why cannot create new universe connections
Many Thanks

Hi,
there are some notes about this in the knowldge base. Here are a couple:
For ODBC, Note 1272557 - Data Access Drivers missing while creating a new connection in Designer
for JDBC, Note 1481410 - JDBC Drivers do not appear in the List Of Drivers when Creating a New Universe Connection in Universe Designer
Can you hit www.service.sap.com/notes to look them up?
Regards,
H

After upgrade to 6.3.4 cannot create new bookmarks by dragging nor open existing bookmark properties

Just upgraded to 3.64. Now I cannot create new bookmarks either by dragging a URL or trying to create a new one in organize bookmarks. For existing bookmarks when I hit properties on the pop up menu all I get is a title bar that says "bookmark properties for (name of bookmark)" but I can't resize it or otherwise manipulate the title bar to access information or change the properties

Hello Victor.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

HT5577 i bought recently a second hand apple i phone 4s but now i cannot creat new apple id

i bought recently a second hand apple i phone 4s but now i cannot creat new apple id .

I suspect you're referring to the 3 free iCloud account limit on an iOS device. If so, there's no way around this. Once that limit is reached, you'll have to create the iCloud account on another iOS device or computer, then setup that account on your phone.

AME iExpenses: Cannot create new approver group

We need to set up approver groups for iExpenses. I assigned myself Approvals Management Administrator and Aprovals Management Business Analyst roles. With these roles I can create new attributes and conditions. However, I cannot create new action types and approval groups. The create button for the approval group just does nothing.
What am I missing? We are 11.5.10.2, AME.B

Pl see if ML Doc 420387.1 (How to Create the Approval Transaction Type for AME.B or higher ?) can help
HTH
Srini

Cannot create new LWP?

To test my Server process, I make a Client process to send numerous requests by creating one-connection-one-thread.
Under same amount of connections (such as 50 connections), indefinitely, the process will be error as follow:
libthread panic: cannot creat new LWP (PID:XXX LWP 2) stacktrace:XXXXXX
my question is:
If there are limits of LWP in a process?
I use unbound thread and let the kernel to balance threads between LWP, must I use bound thread?

I've seen this when my program used a lot of file descriptors. Using truss I could see that a call to open /dev/zero failed and a libthread panic message was displayed. Try using the ulimit command to increase your limit on open files.

Cannot create new Calendar Group in Mountain Lion

I am using a brand new iMac. I didn't use the migration tool-- instead I exported all of my Calendars from Snow Leopard and Imported them via the File menu in the Calendar application in Mountain Lion.
Under the File menu, there is no "New Calendar Group" option. Command-Shift-N results in an error alert sound and no action.
I do not use iCloud for anything other than email-- everything is turned off in System Preferences.
In Calendar, under the Preferences -> Accounts section, I have NO accounts. It is completely blank.
My previous groups from my export/import are there under the "On My Mac" section of the Calendars panel. I can edit them. But I cannot create any new ones.
Any suggestions? Everything on the internet says I need to deactivate my iCloud account calendars... but I don't use them.

Ah, Barney, you are a lifesaver!
Sorry for the late reply, I was away from my computer this weekend.
All of my calendars had been in groups. I moved one of them outside, and TA DA-- "New Calendar Group" appeared.
Thanks so much for the help. I will have to leave 1 calendar outside of a group so I can add as many as I'd like.

Cannot create new virtual network adapter on logical switch team

I am currently moving from Hyper-V 2012 to Hyper-V 2012 R2 and in turn I have just installed SCVMM 2012 R2. I am using SCVMM 2012 R2 to create some NIC teams which I have done no problem in the past with SCVMM 2012 SP1. Now we have everything set up just
like we did in the past and it seems to create the NIC team just fine. The problem is when I try to create a New Virtual Network Adapter, when I click the button, it immediately says:
VMM cannot create the virtual network adapter. Either there are no VM networks associated with the network sites that the uplink port profile "Logical Network Name" Connects to, or the VM networks associated with those network sites all use Hyper-V
network virtualization.
Now I've checked and the VM Network is assigned to the logical network that is associated with the Network Site that contains the host I'm working with. I've also tried disabling Hyper-V network virtualization but that didn't change anything and I thought
that it's always enabled on 2012 R2 anyway.
I would like to gain network connectivity to this team at least for testing purposes and we also are planning on building a Hyper-V cluster. Were some new restrictions added in 2012 R2 to prevent creating virtual network adapters in this scenario or am I
doing something wrong?
Any information would be helpful. Thank you in advance for your time!

Hi Sir,
Glad to hear that the problem has been solved , thanks for your sharing .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Cannot create new mailing list

I have a large addressbook in TB with many mailing lists created in the past. I am trying to create a new one. When I go "File, New", the mailing list option is blanked out.

In Address Book
If I select a 'Mailing List' (not an address book)
File > New > Mailing list is greyed out because you cannot create a mailing list from a mailing list.
If you select an address book, then 'Mailing List' should be available.

Cannot create new user in oracle bam

Hi Guys,
Can anyone help me in creating new user in oracle bam. I've already follow the steps in bamadmin.pdf but i cannot connect to BAM using the one i've created.
Please Help.
Thank you!

RRA wrote:
Hello,
How can I create a new user directly in database instead of creating from System Administrator menu in Oracle Applications R12 ?
Also, is it possible to apply some default responsibilities when a creation of new user account take place via database ?
Thanks.This topic was discussed many times in the forum before, please see old threads for the same topic/discussion along with the code you can use.
Create Application User from the Backend
https://forums.oracle.com/forums/search.jspa?threadID=&q=Create+AND+Application+AND+User+AND+Backend&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Create+AND+Users+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Assign Responsibilities API
https://forums.oracle.com/forums/search.jspa?threadID=&q=Assign+AND+Responsibilities+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
FND_USER_PKG API
https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
FND_USER_PKG.CreateUser
https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG.CreateUser+&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
FND_USER_PKG.AddResp
https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG.addresp&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Cannot create new Solution

Similar Messages

Maybe you are looking for