Cannot create new VM in Virtual Box 4.0.0 on 10.6.6

Hello all. Recently, I installed VirtualBox 4.0.0 on a MacBook Air (about 2 years old) running 10.6.6. No problem installing VirtualBox. However, when I get to the next step, creating a new VM in which to run the guest OS, I have problems. I get to the first screen where you assign a name to the VM. I plan to use a version of XP, so name it Tiny-XP, give it the OS name and version name from the dropdown boxes and press Continue. But nothing happens. No new VM. Any ideas? I've never used VBox before so this is something of a disappointment. Rebooting and repairing permissions did not change this situation.

Update as of 5:15pm on 10/10:
It turns out that iTunes Match may have complicated things. Apparently, my sync didn't work properly (despite iTunes telling me it did).
According to an Apple Chat Support Rep, it seems that some of the videos went to the Cloud and others went to the Phone. I need to find a way to get the videos directly on the phone without this Cloud / Match nonsense.

Similar Messages

Cannot create new folders in Outlook

I just bought a new PC computer. I installed MSFT Office Professional Plus 2010. I opened Outlook and added in (i) the pst folder I had set up from my previous Vista
computer (also with Outlook 2010), (ii) my hotmail account, (iii) my at&t/yahoo account and (iv) my gmail account. I cannot create new folders in any of them.
When I right click anywhere in the navigation pane and select "New Folder..." I get the following error message:
"Outlook cannot read the registry information.
-Close and restart Outlook.
-Reinstall Outlook
-Reinstall Microsoft Exchange or other e-mail system."
I tried all three, including removing and reinstalling Office and removing all of the email accounts/pst files and re-adding and still have the problem.
If I try to right-click properties on any of the accounts, I get the same error message, with the following additional language first:
"Cannot display 'General' page. This page will remain visible, but is not available."
Not sure what is left to try.
Appreciate any ideas.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, If the PC from clean install, you can follow these steps to test this issue.
1.
Start the Outlook in safe mode,
Press and hold the CTRL key,
and then click Outlook.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them.
2.
Create a New profile & PST file to test this issue
If this problem does not occur in the new Outlook profile & PST, the old Outlook profile is corrupted. We can delete that and use a new Outlook profile.
3.
Make sure the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
key permissions to allow full permissions to all users
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  How
to back up and restore the registry in Windows
a)
Exit Outlook if it is running.
b)
Click
Start, and then click Run. Copy and paste (or type) the following command in the
Open box, and then press ENTER: regedit
c)
Locate and select the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
d)
On the
Edit menu, click Permissions.
e)
Click the registry key for the user who is currently logged on, and ensure that
Read and Full Control permissions are both set to
Allow.
f)
Click the Advanced button, ensure that the user who is currently logged on is selected, that
Full Control is listed in the Permissions
column, and that This Key and Subkeys is listed in the
Apply to column.
g)
Click to select the Replace permission entries on all child objects with entries shown here that apply to child objects check box, and clear
the check box
Windows 7: Include inheritable permissions from this
object’s parent
Windows XP: Inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here.
h)
When you are prompted to continue, click Remove.
i)
Click Apply, and then click Yes when you are prompted to continue.
j)
Click OK, and then click OK again.
k)
On the Registry menu, click Exit.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

How to stop "Create New CSS Rule" dialog box

Made the mistake of allowing an Apple tech talk me into an OS X "Install in place". He assured me that all application settings would remain the same as before.
Now, when holding down the "shift" key and typing a word in all caps (in Design View), the "Create new CSS Rule" dialog box pops up and writes:
<span style="font-size: 14px; margin-center: 1px; text-align: left; font-weight: bold; margin-bottom: 6px; padding-bottom: 0px; line-height: 1.3em; margin-top: 3px; font-family: Arial, Helvetica, sans-serif;"><font color="#006666">TEXT</font>
I am trying to find the setting in preferences to disable this, and since the behavior started after OS X "install in place", something must have changed. I just want to type in design view and not have to deal with Dreamweaver overriding what I'm doing.

I am attempting to type some text in "design", not "code" view. I want the text to be caps. I hold down the shift key, type the first letter, and immediately the "New CSS Rule" dialog box pops up. I cancel, but the code...
<span style="font-size: 14px; margin-center: 1px; text-align: left; font-weight: bold; margin-bottom: 6px; padding-bottom: 0px; line-height: 1.3em; margin-top: 3px; font-family: Arial, Helvetica, sans-serif;"><font color="#006666">TEXT</font>
...is created anyway.I just want to type a word into an existing div with no changes or dialog boxes or any input from Dreamweaver. I was able to do that before, and cannot do it now. There must be some setting that I am missing in preferences.

Cannot create new folder?

I have just moved to a new hosting and have connected to it
and I can edit files. When I try to add a folder to the remove I'll
get
"An FTP error occured - cannot create new folder .
Access denied. The file may not exist or there could be a
permission problem".
Any idea?

Hi,
Did you make any changes before the issue appears?
Before going further, you may try the
system restore to go back to a previous status and check the result.
Tracy Cai
TechNet Community Support

Cannot Create New Mailbox

Hi all,
First of all I already create a similar thread : http://social.technet.microsoft.com/Forums/en-US/b8f88745-ca79-43f9-8857-3b87781e5c19/rbac-to-create-mailbox?forum=exchangesvradmin
I got a problem in my Exchange Server 2013 environment. I cannot create new mailbox (new user) from ECP. But I can create new mailbox and choose existing user.
Active Directory operation failed on DC.mydomain.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031A121F, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
already try with no luck :
re-inherit the permission.
setup /prepareAD
I create new user and assign Org Management & Domain Admin
how to check whether the permission in my AD is correct ? or any idea should I start troubleshooting ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

solved by executing setup.exe /preparedomain
and I found one of the server in container ADSIEdit were disabled inheritance. execute setup.exe /prepareAD, reboot the server (because it
ask for it), then execute setup.exe /preparedomain
cheers ! :)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

BO4 - cannot create new universe connections

Hi,
In Universe Design Tool, trying to create new universe connections but not allowing this.
Doesn't show all the data access drivers we have installed.
Can migrate connections fine from XIR2 fine and reports run O.K
Why cannot create new universe connections
Many Thanks

Hi,
there are some notes about this in the knowldge base. Here are a couple:
For ODBC, Note 1272557 - Data Access Drivers missing while creating a new connection in Designer
for JDBC, Note 1481410 - JDBC Drivers do not appear in the List Of Drivers when Creating a New Universe Connection in Universe Designer
Can you hit www.service.sap.com/notes to look them up?
Regards,
H

After upgrade to 6.3.4 cannot create new bookmarks by dragging nor open existing bookmark properties

Just upgraded to 3.64. Now I cannot create new bookmarks either by dragging a URL or trying to create a new one in organize bookmarks. For existing bookmarks when I hit properties on the pop up menu all I get is a title bar that says "bookmark properties for (name of bookmark)" but I can't resize it or otherwise manipulate the title bar to access information or change the properties

Hello Victor.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

HT5577 i bought recently a second hand apple i phone 4s but now i cannot creat new apple id

i bought recently a second hand apple i phone 4s but now i cannot creat new apple id .

I suspect you're referring to the 3 free iCloud account limit on an iOS device. If so, there's no way around this. Once that limit is reached, you'll have to create the iCloud account on another iOS device or computer, then setup that account on your phone.

AME iExpenses: Cannot create new approver group

We need to set up approver groups for iExpenses. I assigned myself Approvals Management Administrator and Aprovals Management Business Analyst roles. With these roles I can create new attributes and conditions. However, I cannot create new action types and approval groups. The create button for the approval group just does nothing.
What am I missing? We are 11.5.10.2, AME.B

Pl see if ML Doc 420387.1 (How to Create the Approval Transaction Type for AME.B or higher ?) can help
HTH
Srini

Cannot create new LWP?

To test my Server process, I make a Client process to send numerous requests by creating one-connection-one-thread.
Under same amount of connections (such as 50 connections), indefinitely, the process will be error as follow:
libthread panic: cannot creat new LWP (PID:XXX LWP 2) stacktrace:XXXXXX
my question is:
If there are limits of LWP in a process?
I use unbound thread and let the kernel to balance threads between LWP, must I use bound thread?

I've seen this when my program used a lot of file descriptors. Using truss I could see that a call to open /dev/zero failed and a libthread panic message was displayed. Try using the ulimit command to increase your limit on open files.

Cannot create new virtual network adapter on logical switch team

I am currently moving from Hyper-V 2012 to Hyper-V 2012 R2 and in turn I have just installed SCVMM 2012 R2. I am using SCVMM 2012 R2 to create some NIC teams which I have done no problem in the past with SCVMM 2012 SP1. Now we have everything set up just
like we did in the past and it seems to create the NIC team just fine. The problem is when I try to create a New Virtual Network Adapter, when I click the button, it immediately says:
VMM cannot create the virtual network adapter. Either there are no VM networks associated with the network sites that the uplink port profile "Logical Network Name" Connects to, or the VM networks associated with those network sites all use Hyper-V
network virtualization.
Now I've checked and the VM Network is assigned to the logical network that is associated with the Network Site that contains the host I'm working with. I've also tried disabling Hyper-V network virtualization but that didn't change anything and I thought
that it's always enabled on 2012 R2 anyway.
I would like to gain network connectivity to this team at least for testing purposes and we also are planning on building a Hyper-V cluster. Were some new restrictions added in 2012 R2 to prevent creating virtual network adapters in this scenario or am I
doing something wrong?
Any information would be helpful. Thank you in advance for your time!

Hi Sir,
Glad to hear that the problem has been solved , thanks for your sharing .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Cannot create new folders on desktop. Cannot drag new items onto desktop. Desktop in Finder opens with Terminal. Not sure if this has anything to do with upgrading to Mavericks but I need help if anyone has ideas. Thank you.

I can no longer create new folders on my desktop. The option to do that is now light gray on the drop down menu and can't be selected.
I cannot drag new items onto desktop any longer either.
The Desktop in Finder opens with Terminal.
Folders and items on Desktop open and work normally.
Not sure if this has anything to do with upgrading to Mavericks but I need help if anyone has ideas.
Thank you.

Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or rebooting. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You should get a new line ending in a dollar sign (“$”). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.)

Cannot create new Calendar Group in Mountain Lion

I am using a brand new iMac. I didn't use the migration tool-- instead I exported all of my Calendars from Snow Leopard and Imported them via the File menu in the Calendar application in Mountain Lion.
Under the File menu, there is no "New Calendar Group" option. Command-Shift-N results in an error alert sound and no action.
I do not use iCloud for anything other than email-- everything is turned off in System Preferences.
In Calendar, under the Preferences -> Accounts section, I have NO accounts. It is completely blank.
My previous groups from my export/import are there under the "On My Mac" section of the Calendars panel. I can edit them. But I cannot create any new ones.
Any suggestions? Everything on the internet says I need to deactivate my iCloud account calendars... but I don't use them.

Ah, Barney, you are a lifesaver!
Sorry for the late reply, I was away from my computer this weekend.
All of my calendars had been in groups. I moved one of them outside, and TA DA-- "New Calendar Group" appeared.
Thanks so much for the help. I will have to leave 1 calendar outside of a group so I can add as many as I'd like.

I cannot create new file (.xslx) inside a folder with right click.

I work with excel 2007 in window 7. Usually I create new files (.xlsx) by right click while I am inside a folder. But recently I have lost this opportunity. Now whenever I open a folder and want to create a new file (either .xlsx or .doc) I right click
there. But there I find neither excel file icon nor word file icon. Power point, Access, Publisher file icons can be found there at that time. I do not know how I have lost the opportunity. Being failed to create files inside a folder now I go to start button
or office button to create a new file.
But I want to have the previous opportunity so that I can create a new file (excel or word) while I am visiting inside a folder. Is it possible? Thank, Nurul Amin.

Hi,
I would agree with Repair step provided by Robert, this will rewrite all the registry keys into the computer. Please have a try and let us know the result.
Also, another quick way to rewrite all the registry keys and reregister the product is to run the problematic Office applications with "/regserver" switch:
Press Win + R and type "winword.exe /regserver" or "Excel.exe /regserver" in the blank box, then press
Enter.
You might also want to give this a try.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Cannot create new mailing list

I have a large addressbook in TB with many mailing lists created in the past. I am trying to create a new one. When I go "File, New", the mailing list option is blanked out.

In Address Book
If I select a 'Mailing List' (not an address book)
File > New > Mailing list is greyed out because you cannot create a mailing list from a mailing list.
If you select an address book, then 'Mailing List' should be available.

Cannot create new VM in Virtual Box 4.0.0 on 10.6.6

Similar Messages

Maybe you are looking for