Cannot create protection groups from Azure Portal

Trying to setup Azure Site Recovery. Have successfully added the Hyper-V Sites and installed the provider and applied the registration key. Both servers show green.
The issue is when moving to the next step in the process of creating a Protection Group. I click create new protection group and the normal drop down list and options do not show up. I get an error saying "An
error occurred while retrieving the required data for this view." I have tried logging off and on trying different browsers (Chrome, IE, Mozilla) with same results. Have also tried multiple computers and servers same result.
I have looked up the PowerShell commands to try to find how to create the protection group from PowerShell but no luck finding specific command.
For now I am going to try to delete the sites, vault, and create everything from scratch.
<button aria-label="Replication Settings" class="fx-balloonicon-button" type="button"></button>

Hello,
Please can you share the following detail with me
1) Go to the Jobs view of the ASR Vault & find the jobs which were run during the Registration of both your servers.
2) Drill into the job and from the properties page please send us the JobId.
We will need this information to understand what could have potentially gone wrong with the Vault.
Regards,
Anoop KV

Similar Messages

Cannot Create New Share from Azure PowerShell - The remote name could not be resolved

I have created a storage account. It seems that there isn't a specific way to create file storage rather than blob storage.
I followed the instruction for creating a share in Azure Power Shell but when I try $s=New-AzureStorageShare... I keep getting the error "The remote name could not be resolved". I checked the account name and it matched what is shown on the
Azure site.
I also cannot access the storage from the URL's. I get the message "This page can't be displayed.
How can I create a file storage account and a share to it?
Thanks,
Glen

Hi Glen,
Thanks for your post!
Did you sign up your File Service ?
To sign up, go to the Microsoft Azure Preview Portal, and sign up for the Microsoft Azure Files service using one or more of your subscriptions. As subscriptions
are approved for the Azure File preview, you will get an email notifying you of the approval. We will be slowly opening up the service to users in batches, so please be patient after signing up.
After sign up and enable this feature, I suggest you could refer to this blog for how to use Azure File service (
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx#faq7 ).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creating Target Group from External File

Hello Experts
We need to create target group from external file. (That is to say we will have let's say txt file containing BP that belongs to specific target group and we need to assign these BPs to to specific target group in SAP CRM)
I have searched for it on sdn and found something benefical. I have found BAPI_TARGETGROUP_CREATE, I have checked it but I don't understand how should we use it becuase as far as we understand it just creates target group, we cannot see anything related with Business Partner. How can we relate BPs with the target group we create by this BAPI.
What should we do, is anyone have previous experience about it? or is there a way to do it without using BAPI.
thanks it advance
M.
Edited by: Mehmet Ergul on Jan 22, 2009 11:19 AM

Hi,
You can do this from within the standard Web UI. It's straight out of the box.
Create a profile set and in there create a target group in the target group assignment block just by entering the description of the target group. Then enter edit mode of this target group and click the button "Import Members". Remeber to mark "Change selected target group" unless you want to create a new target group.
/Anders

Cannot create distribution groups in OWA

Hi all,
Have just transitioned to Exchange 2013. Users who use OWA now cannot create distribution groups. They use IE11 on Windows 7 and are using the standard (not the light version) of OWA.
When in the 'People' pane of OWA there is only the option to add a new contact (as in screenshot below). There is no option to add a group. Desktop users of Outlook are fine.
Anyone else experienced this and found a solution?
thanks

Hi,
Agree with Martina. I checked in my lab, in Exchange 2013 RTM, there is no option to create the contact group. In Exchange 2013 CU1, under People, click on +new, you will see the followings:
If you want that functionality, you need to update your Exchange server to at least Exchange 2013 CU1.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Creating Protection Group Fails with Error:360 The operation failed due to a virtual disk service error

Hello
I'm setting up a DPM server (2012 R2) at a remote site; everything goes well with no issues until a protection group is created, at which point I get the following error;
Create protection group: Protection Group 1 failed:
Error 360: The operation failed due to a virtual disk service error
Error details: The system cannot find the file specified
Recommended action: Retry the operation.
The environment is as follows;
- Virtual Machine Running Server 2008 R2 Fully updated
- Storage Pool is an iSCSI connection Thick Provisioned 1TB GPT and shows in Disk Management with no issues.
- Have connected to Session 0 (console)
- Error log shows The provider did not receive a Plug and Play service notification for the volume. volume=10 for the VDS Dynamic Provider
Can Anyone Help?
Thanks
.Adam Langdon

Hi,
Disk defrag is initiated when a volume shrink is attempted. See if there is any problem defragging a volume and correct any problems doing that.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

How to create a Group from an existing email -

I just want to create a Group from an existing email received. Don't want to add people individually to Address Book, then drag them to the Group. Would prefer to copy/paste the addresses into the Group. I'm part of a team at work wth 25 people! Do I really have to add their addresses individually? Seems ridiculous. Don't even need their names - just the emails, so when I type in "United," for example, I get all the folks in that Group which is named "United."
Thanks.

There was a "magical" set of Applescripts that would have done that, but it no longer works.
There is no way in the OS to do that besides making the Applescript yourself using the current Script Editor.
Another way to do what you want is to select all of the addresses (select one, then cmd-A). Then, drag the selection to somewhere in the Finder. That will create a text clipping. You can then drag that text clipping into the address field in Mail.
The text clipping will be named with the first few email addresses. You can rename it in the Finder.
Each one can be your own "distribution" list.

Move Protection Group from One DPM server to another DPM server

Hi Mike,
Can we move Protection Group from one DPM 2012 SP1 to another DPM 2012 R2 version? If yes then what is the steps to perform that. Also i am running DPM servers with co-located and non-colocated configuration. What would be best as per best practice? Because
my 95% backup are SQL backups.

Hi,
There are no provisions in DPM to move protection groups or protected data sources to a new DPM server and maintain the recovery points. The best you can do is to stop protection on DPM1 and retain the replica, then run the setdpmserver.exe on the
protected server and point it the DPM2 server. On DPM2, run the attach-productionserver.ps1 script to establish agent communications, then make new protection groups and re-protect the same data sources. After the retention goals are met, delete
the replica from under inactive protection group on DPM1.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Cannot create a region from a task flow containing facelets fragments in a

hi
Please consider ADF applications migrated from JDeveloper 11g R1 to 11g R2 [1].
When using JDeveloper 11g R2 to create a task-flow containing facelets fragments and dropping it on an existing/migrated page (created using JDeveloper 11g R1) results in a message :
"Cannot create a region from a task flow containing facelets fragments in a jspx page.".
What would be "good guidelines" (do's and don't's) of using facelets aspects in an ADF application migrated from JDeveloper 11g R1 to 11g R2?
- [1] e.g. specifically JDeveloper 11.1.1.6.0 to JDeveloper 11.1.2.4.0, see also forum thread "migration support from 11.1.1.6.0 to 11.1.2.4.0"
at migration support from 11.1.1.6.0 to 11.1.2.4.0
many thanks
Jan Vervecken

Thanks for your reply Timo.
Timo Hahn wrote:
... just a wild guess: Oracle is lazy here. They did not expect too many people migrating from a running 11.1.1.6.0 or 11.1.1.7.0 to 11.1.2.4.0. ...Hmm ... maybe.
... We had this discussion before: is 11.1.2.4.0 a good migration target? ...Can you refer to that discussion exactly.
It is not the same as in forum thread "choosing JDeveloper 11g R1 or JDeveloper 11g R2 "
at choosing JDeveloper 11g R1 or JDeveloper 11g R2
which does not talk about migration to 11g R2.
... My answer was and still is: No. ... I don't see a reason why to do a migration to 11.1.2.x. ...We are considering if a migration to 11g R2 will allow us to make our application "facelets ready", which could potentially allow easier migration to 12c .
Altough Brian Fry (Oracle) wrote "Re: choosing JDeveloper 11g R1 or JDeveloper 11g R2", the "facelets considerations" in this current forum thread could suggest something different.
... I know that we have to migrate to 12c once it'll be available so why the extra step? ...There could be layout requirements that can be perceived to be more easily/flexibly implemented using facelets.
A team could have resources available now, and maybe not in a couple of months (related to wanting/needing to use facelets, and related to the "perceived/expected complexity" of an 11g R1 to 12c migration compared to an 11g R2 to 12c migration).
... (you know how complex this can be) ...Maybe less knowing, and more trying to find out.
... in a couple of month when 12c is available. ...How do you know it will be only "a couple of month" before 12c is available. Do you have specific references that confirm this?
many thanks
Jan

DPM 2012 Cannot modify or create protection groups after upgrading from DPM 2010

Hi,
We have recently upgraded from DPM 2010 to 2012. Since the upgrade we have been unable to create new protection groups or add new datasources to an existing group. Existing backups are running without errors.
We have tried checking the DPM sql user account permissions as described in
this article but with no luck. More searching has not provided any other relavent fixes. We are now stuck on how to troubleshoot this any further.
In the DPM console we get the following error adding a VM to an existing protection group:
Modify protection group: Virtual Machines failed:
Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
Error details: VssError:Shadow copying the specified volume is not supported.
(0x8004230C)
Recommended action: Retry the operation.
Allocate Replica For \Backup Using Saved State\Cacti failed:
Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
Error details: VssError:Shadow copying the specified volume is not supported.
(0x8004230C)
Recommended action: Retry the operation.
In the event log we see:
The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 1 Schedules removed: 1 Schedules updated: 0.
Problem Details:
<ConsistencyCheck><__System><ID>26</ID><Seq>1534</Seq><TimeCreated>23/04/2012 09:33:29</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></ConsistencyCheck>
the message resource is present but the message is not found in the string/message table
Thanks in advance for any advice.

Hi,
The error 0x8004230C VSS_E_VOLUME_NOT_SUPPORTED: Shadow copying the specified volume is not supported, can only come when trying to enable shadow copies on new volumes created when trying to add new datasources to protection. Generally speaking
Only NTFS volumes greater that 1GB with a minimum of 300MB free space can be shadow copied, so something is going wrong with the volume creation / format process. Please investigate that, see if two new volumes get created when protecting a new data
source, and the sizes are greated that 1GB and also verify it's formatted NTFS.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Can't create protection groups on the Azure Portal with on-premise hyper-v to Azure

I’m trying to setup Azure Site Recovery on-premise hyper-v to Azure. I have successfully configured the Hyper-V Sites and installed the provider with the registration key. Both servers
show green. I see my hyper-v server on the server tab.
The issue occurred when I’m moving to the next step “creating a Protection Group”. When click on the “create new protection group” I’m getting the error saying "An error
occurred while retrieving the list of servers".
I had this error also yesterday and I tried to delete the sites, vault and create everything again. I used the unregister scripted
https://msdn.microsoft.com/en-us/library/azure/dn903160.aspx?f=255&MSPPError=-2147217396
Still I got the error today again.
I really don’t understand what I’m doing wrong.
Ps. I followed this guide
http://www.ms4u.info/2014/12/configure-azure-site-recovery-asr.html

Your welcome, glade I could help you out. I'm kind of stuck myself with site-to site vpn part. I made the posted here with all the details.
https://social.msdn.microsoft.com/Forums/en-US/4f981cda-52ea-41e9-b9e7-4c34bb7367b8/need-help-to-configure-a-vpn-connection-to-an-azure?forum=WAVirtualMachinesVirtualNetwork
I want to make a planned failover and connect the network with the virtual machines. Somehow the vpn connection fails on phase 2.

Unable to modify or create Protection Groups in DPM 2012 R2 - Error: 31220

"DPM failed to apply the required policies to this protection group since the recovery point limit for this DPM server has been exceeded. (ID: 31220)"
I am trying to add new data sources to our DPM server and continually run into the above message. I get the same error whether I attempt to create a new Protection Group and add the data sources to it... or if I attempt to modify an existing Protection Group
to add data sources to it. I can guess that the obvious answer is "You have too many data sources or to many recovery points for the server to handle..." If that's the case, I need to figure out how to tell how many I have. As best as I can figure
myself, I have less than 150 data sources and less than 2500 recovery points/snapshot/express-full. If there is a tool or a command that I can run to tell that, I'd be grateful to anyone who can point me in that direction.
I have tried to remove inactive member servers that no longer exist from our Protection Groups... no effect. I have tried to completely delete the removed server's data from replica... no effect. We began seeing this issue in 2012 SP1, so I ran
through the upgrade to 2012 R2 hoping that it would resolve the issue... no effect. I am able to remove members from our Protection Groups, but if I try to add an entirely new member or even just a single DB on an already protected member... fails with
above message. I also tried to adjust the retention and backup schedule... fails with above error.
Other than the stock answer from Microsoft that I am truly exceeding some limit, is there any other underlying issue that can cause this to be mis-reported to me? I hope that SOMEONE has an answer or guidance for me.

Hi,
Another DPM PowerShell script - this one allows you to delete older recovery points for a selected datasource without having to modify the PG.
#Author : Ruud Baars
#Date : 11/09/2008
#Edited : 11/15/2012 By: Wilson S.
#edited : 11/27/2012 By: Mike J.
# NOTE: Update script to only remove recovery points on Disk. Recovery points removed will be from the oldest one up to the date
# entered by the user while the script is running
#deletes all recovery points before 'now' on selected data source.
$version="V4.7"
$ErrorActionPreference = "silentlycontinue"
add-pssnapin sqlservercmdletsnapin100
Add-PSSnapin -Name Microsoft.DataProtectionManager.PowerShell
$MB=1024*1024
$logfile="DPMdeleteRP.LOG"
$wait=10 #seconds
$confirmpreference = "None"
function Show_help
cls
$l="=" * 79
write-host $l -foregroundcolor magenta
write-host -nonewline "`t<<<" -foregroundcolor white
write-host -nonewline " DANGEROUS :: MAY DELETE MANY RECOVERY POINTS " -foregroundcolor red
write-host ">>>" -foregroundcolor white
write-host $l -foregroundcolor magenta
write-host "Version: $version" -foregroundcolor cyan
write-host "A: User Selects data source to remove recovery points for" -foregroundcolor green
write-host "B: User enters date / time (using 24hr clock) to Delete recovery points" -foregroundcolor green
write-host "C: User Confirms deletion after list of recovery points to be deleted is displayed." -foregroundcolor green
write-host "Appending to log file $logfile`n" -foregroundcolor white
write-host "User Accepts all responsibilities by entering a data source or just pressing [Enter] " -foregroundcolor white -backgroundcolor blue
"**********************************" >> $logfile
"Version $version" >> $logfile
get-date >> $logfile
show_help
$DPMservername=&"hostname"
"Selected DPM server = $DPMservername" >> $logfile
write-host "`nConnnecting to DPM server retrieving data source list...`n" -foregroundcolor green
$pglist = @(Get-ProtectionGroup $DPMservername) # WILSON - Created PGlist as array in case we have a single protection group.
$ds=@()
$tapes=$null
$count = 0
$dscount = 0
foreach ($count in 0..($pglist.count - 1))
# write-host $pglist[$count].friendlyname
$ds += @(get-datasource $pglist[$count]) # WILSON - Created DS as array in case we have a single protection group.
# write-host $ds
# write-host $count -foreground yellow
if ( Get-Datasource $DPMservername -inactive) {$ds += Get-Datasource $DPMservername -inactive}
$i=0
write-host "Index Protection Group Computer Path"
write-host "---------------------------------------------------------------------------------"
foreach ($l in $ds)
"[{0,3}] {1,-20} {2,-20} {3}" -f $i, $l.ProtectionGroupName, $l.psinfo.netbiosname, $l.logicalpath
$i++
$DSname=read-host "`nEnter a data source index from list above - Note co-located datasources on same replica will be effected"
if (!$DSname)
write-host "No datasource selected `n" -foregroundcolor yellow
"Aborted on Datasource name" >> $logfile
exit 0
$DSselected=$ds[$DSname]
if (!$DSselected)
write-host "No datasource selected `n" -foregroundcolor yellow
"Aborted on Datasource name" >> $logfile
exit 0
$rp=get-recoverypoint $DS[$dsname]
$rp
# $DoTape=read-host "`nDo you want to remove when recovery points are on tape ? [y/N]"
# "Remove tape recovery point = $DoTape" >> $logfile
write-host "`nCollecting recoverypoint information for datasource $DSselected.name" -foregroundcolor green
if ($DSselected.ShadowCopyUsedspace -gt 0)
while ($DSSelected.TotalRecoveryPoints -eq 0)
{ # "still 0"
#this is on disk
$oldShadowUsage=[math]::round($DSselected.ShadowCopyUsedspace/$MB,1)
$line=("Total recoverypoint usage {0} MB on DISK in {1} recovery points" -f $oldShadowUsage ,$DSselected.TotalRecoveryPoints )
$line >> $logfile
write-host $line`n -foregroundcolor white
#this is on tape
#$trptot=0
#$tp= Get-RecoveryPoint($dsselected) | where {($_.Datalocation -eq "Media")}
#foreach ($trp in $tp) {$trptot += $trp.size }
#if ($trptot -gt 0 )
# $line=("Total recoverypoint usage {0} MB on TAPE in {1} recovery points" -f ($trptot/$MB) ,$DSselected.TotalRecoveryPoints )
# $line >> $logfile
# write-host $line`n -foregroundcolor white
[datetime]$afterdate="1/1/1980"
#$answer=read-host "`nDo you want to delete recovery points from the beginning [Y/n]"
#if ($answer -eq "n" )
# [datetime]$afterdate=read-host "Delete recovery points AFTER date [MM/DD/YYYY hh:mm]"
[datetime]$enddate=read-host "Delete ALL Disk based recovery points BEFORE and Including date/time entered [MM/DD/YYYY hh:mm]"
"Deleting recovery points until $enddate" >>$logfile
write-host "Deleting recovery points until and $enddate" -foregroundcolor yellow
$rp=get-recoverypoint $DSselected
if ($DoTape -ne "y" )
$RPselected=$rp | where {($_.representedpointintime -le $enddate) -and ($_.Isincremental -eq $FALSE) -and ($_.DataLocation -eq "Disk")}
else
$RPselected=$rp | where {($_.representedpointintime -le $enddate) -and ($_.Isincremental -eq $FALSE)}
if (!$RPselected)
write-host "No recovery points found!" -foregroundcolor yellow
"No recovery points found, aborting...!" >> $logfile
exit 0
$reselect = $enddate
$adjustflag = $false
foreach ($onerp in $RPselected)
$rtime=[string]$onerp.representedpointintime
$rsize=[math]::round(($onerp.size/$MB),1)
$line= "Found {0}, RP size= {1} MB (If 0 MB, co-located datasource cannot be computed), Incremental={2} "-f $rtime, $rsize,$onerp.Isincremental
$line >> $logfile
write-host "$line" -foregroundcolor yellow
#Get dependent rp's for data source
$allRPtbd=$DSselected.GetAllRecoveryPointsToBeDeleted($onerp)
foreach ($oneDrp in $allRPtbd)
if ($oneDrp.IsIncremental -eq $FALSE) {continue}
$rtime=[string]$oneDrp.representedpointintime
$rsize=[math]::round(($oneDrp.size/$MB),1)
$line= ("`t...is dependancy for {0} size {1} `tIncremental={2}" -f $rtime, $rsize, $oneDrp.Isincremental)
$line >> $logfile
if ($oneDrp.representedpointintime -ge $enddate)
#stick to latest full ($oneDrp = dependents, $onerp = full)
$adjustflag = $true
$reselect = $onerp.representedpointintime
"<< Dependents newer than BEFORE date >>>" >> $logfile
Write-Host -nonewline "`t <<< later than BEFORE date >>>" -foregroundcolor white -backgroundcolor red
write-host "$line" -foregroundcolor yellow
else
#Ok, include current latest incremental
$reselect = $oneDrp.representedpointintime
write-host "$line" -foregroundcolor yellow
if ($reselect -lt $oneDrp.representedpointintime)
#we adjusted further backward than latest incremental within selection
$reselect = $rtime
$line = "Adjusted BEFORE date to be $reselect to include dependents to $enddate"
$line >> $logfile
Write-Host $line -foregroundcolor white -backgroundcolor blue
$line="`n<<< SECOND TO LAST CHANCE TO ABORT - ONE MORE PROMPT TO CONFIRM. >>>"
write-host $line -foregroundcolor white -backgroundcolor blue
$line >> $logfile
$line="Above recovery points within adjusted range will be permanently deleted !!!"
write-host $line -foregroundcolor red
$line >> $logfile
$line="These RP's include dependent recovery points and may contain co-located datasource(s)"
write-host $line -foregroundcolor red
$line >> $logfile
$line="Data source activity = " + $DSselected.Activity
$line >> $logfile
write-host $line -foregroundcolor white
$DoDelete=""
while (($DoDelete -ne "N" ) -and ($DoDelete -ne "Y"))
$line="Continue with deletion (must answer) Y/N? "
write-host $line -foregroundcolor white
$DoDelete=read-host
$line = $line + $DoDelete
$line >> $logfile
if (!$DSselected.Activity -eq "Idle")
$line="Data source not idle, do you want to wait Y/N ? "
write-host $line -foregroundcolor yellow
$Y=read-host
$line = $line + $Y
$line >> $logfile
if ($Y -ieq "Y")
Write-Host "Waiting for data source to become idle..." -foregroundcolor green
while ($DSselected.Activity -ne "Idle")
("Waiting {0} seconds" -f $wait) >>$logfile
Write-Host -NoNewline "..." -ForegroundColor blue
start-sleep -s $wait
if ($DoDelete -eq "Y")
foreach ($onerp in $RPselected)
#reselect is adjusted to safe range relative to what was requested
#--- if adjustflag not set then all up to including else only older because we must keep the full
if ((($onerp.representedpointintime -le $reselect) -and ($adjustflag -eq $false)) -or ($onerp.representedpointintime -lt $reselect))
$rtime=[string]$onerp.representedpointintime
write-host `n$line -foregroundcolor red
$line >>$logfile
if (($onerp ) -and ($onerp.IsIncremental -eq $FALSE)) { remove-recoverypoint -RecoveryPoint $onerp -confirm:$True} # >> $logfile}
$line =("---`nDeleting recoverypoint -> " + $rtime)
$line >>$logfile
"All Done!" >> $logfile
write-host "`nAll Done!`n`n" -foregroundcolor white
$line="Do you want to View DPMdeleteRP.LOG file Y/N ? "
write-host $line -foregroundcolor white
$Y=read-host
$line = $line + $Y
$line >> $logfile
if ($Y -ieq "Y")
Notepad DPMdeleteRP.LOG
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Cannot create a group with no members through DAS

I'm using OID 10.1.2.0.2.
It seems that the DAS Self Service Console cannot work with groups with no members:
- When creating a group, it always assigns orcladmin as a member.
- When deleting the last member from a group, an error is shown ("Require at least one user or group member").
- If you create an empty group via other means (e.g. the oidadmin tool), the group will not be visible in the "role assignment" section when creating a new user (even though we enabled that group for role assignment in the "user entry" configuration). After adding one member through the "edit group" page, the role shows up in the role assignment section.
I have a couple of questions regarding this:
1) Is this limitation (group must have at least one member) an ldap or OID limitation, or is it only a DAS or even "self service console" limitation?
2) Why is this limitation there?
3) Is there a way to work around this, i.e. make self service console be able to handle empty groups?
Any help would be greatly appreciated.
Regards,
Johan

I do not agree that a group owner should be a member of that group. For example, I have a group "admins" and a group "analysts". The "admins" group is owner of the "analysts" group, since the users in the "admins" group must be able to create users and assign them to the "analysts" group. However, the "admins" group is not member of the "analysts" group, because I do not want the admins to act as analysts in my application. Ownership of a group (being able to manage it) and membership of a group are two different things. Besides, I also do not understand why the OIDDAS makes the orcladmin user a member of every group that you create there.
Of course, eventually I will have members in my group. But why is it a problem that there are initially no members of a group? I see no reason at all why this would be a problem.
The reason why I ask this is that creating an empty group (initially) is a requirement of my setup process. I am trying to release a clean setup script (with an ldif file) out of development, that our operational department can use to set things up. I want my ldif file to prepare all the necessary groups and owners, but not to create members in those groups (that's the task of the operational people).
However, as soon as I have these empty groups in place, the OIDDAS starts to act strangely (namely, the groups are not visible in the "role assignment" section when creating a user, until there is at least one member in the groups). That's when I found out that the OIDDAS actually does not like having empty groups (error when creating group without members, error when removing last member, ...).
If anyone knows, can you give me one good reason why the OIDDAS does not allow empty groups (or making groups empty)? As far as I can see, the OID/LDAP itself does not have a problem with this (you can create an empty group without any problem via the oidadmin application, or via import of an ldif file).
Thanks,
Johan

Cannot create a new login in portal

Dear Experts,
After the installation of portal, i was not able to login with j2ee_admin, i logged in with administrator, But i cannot create a new user as shown in the below screen.

Dear Divayanshu,
From the said note everything is correct.
trace:
trc file: "dev_server0", trc level: 1, release: "720"
sysno      03
sid        JDT
systemid   562 (PC with Windows NT)
relno      7200
patchlevel 0
patchno    63
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
profile    \\AWQAFIDES-HQ\sapmnt\JDT\SYS\profile\JDT_J03_AWQAFIDES-HQ
pid        3288
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      All, egi
Wed Aug 13 10:49:04 2014
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : E:\usr\sap\JDT\J03\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\AWQAFIDES-HQ\sapmnt\JDT\SYS\profile\JDT_J03_AWQAFIDES-HQ
arg[ 4] : -DSAPINFO=JDT_03_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID31923250
arg[ 7] : -file=E:\usr\sap\JDT\J03\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=E:\usr\sap\JDT\J03\work\jstart.jvm
arg[ 9] : -traceFile=E:\usr\sap\JDT\J03\work\dev_server0
arg[10] : -javaOutFile=E:\usr\sap\JDT\J03\work\jvm_server0.out
F
F Wed Aug 13 10:49:04 2014
F ********************************************************************************
F Java environment properties
F    root directory    : E:\usr\sap\JDT\J03\exe\sapjvm_6
F    vendor            : SAP AG
F    version           : 1.6.0_17
F    cpu               : amd64
F    java vm type      : server
F    java vm version   : 6.1.018
F    jvm library name : jvm.dll
F    library path      : E:\usr\sap\JDT\J03\exe\sapjvm_6\jre\bin\server;E:\usr\sap\JDT\J03\exe\sapjvm_6\jre\bin
F    executable path   : E:\usr\sap\JDT\J03\exe\sapjvm_6\bin
F    SAP extensions    : available
F ********************************************************************************
I [Thr 464] MtxInit: 10002 0 2
I [Thr 464] MPI: dynamic quotas disabled.
I [Thr 464] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 464] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 464] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 464] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 464] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 464] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Wed Aug 13 10:49:04 2014
F ********************************************************************************
F SAP Java VM arguments:
F    arg[ 0] = vfprintf
F    arg[ 1] = abort
F    arg[ 2] = exit
F    arg[ 3] = -XmonGcCallback
F    arg[ 4] = -XdebugStateChangeCallback
F    arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F    arg[ 6] = -Xjvmx
F    arg[ 7] = -XsapSystem:03
F    arg[ 8] = -DSAPSTARTUP=1
F    arg[ 9] = -DSAPSYSTEM=03
F    arg[10] = -DSAPSYSTEMNAME=JDT
F    arg[11] = -DSAPMYNAME=AWQAFIDES-HQ_JDT_03
F    arg[12] = -DSAPDBHOST=AWQAFIDES-HQ
F    arg[13] = -DSAPINFO=JDT_03_server0
F    arg[14] = -Dj2ee.dbhost=AWQAFIDES-HQ
F    arg[15] = -Dsun.java.launcher=jstart
F    arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F    arg[17] = -Djstartup.mode=JSTART
F    arg[18] = -Djstartup.whoami=server
F    arg[19] = -Djstartup.ownProcessId=3288
F    arg[20] = -Djstartup.ownHardwareId=U1400945072
F    arg[21] = -Djstartup.debuggable=yes
F    arg[22] = -DLoadBalanceRestricted=no
F    arg[23] = -XdebugPortRange:50321-50321
F    arg[24] = -Denv.class.path=
F    arg[25] = -Dsys.global.dir=E:\usr\sap\JDT\SYS\global
F    arg[26] = -Dapplication.home=E:\usr\sap\JDT\J03\exe
F    arg[27] = -Djava.class.path=E:\usr\sap\JDT\J03\exe\jstart71.jar;E:\usr\sap\JDT\J03\exe\sapjvm_6\lib\jvmx.jar;E:\usr\sap\JDT\J03\exe\sapjvm_6\lib\jvmx_tools.jar;E:\usr\sap\JDT\J03\exe\jre\lib\iqlib.jar;E:\usr\sap\JDT\J03\exe\sapjvm_6\lib\tools.jar;E:\usr\sap\JDT\J03\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;E:\usr\sap\JDT\J03\j2ee\cluster\bin\boot\jaas.jar;E:\usr\sap\JDT\J03\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;E:\usr\sap\JDT\J03\j2ee\cluster\bin\boot\memoryanalyzer.jar
F    arg[28] = -Djava.library.path=E:\usr\sap\JDT\J03\exe\sapjvm_6\jre\bin\server;E:\usr\sap\JDT\J03\exe\sapjvm_6\jre\bin;E:\usr\sap\JDT\J03\j2ee\os_libs;E:\usr\sap\JDT\J03\exe\sapjvm_6\bin;E:\usr\sap\JDT\J03\exe;C:\Program Files\EMC NetWorker\nsr\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn;C:\Program Files\Microsoft SQL Server\100\Tools\Binn;C:\Program Files\Microsoft SQL Server\100\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn;E:\usr\sap\JDT\SYS\exe\uc\NTAMD64
F    arg[29] = -XX:PermSize=1024m
F    arg[30] = -Xmx2048m
F    arg[31] = -XX:MaxNewSize=410m
F    arg[32] = -XX:MaxPermSize=1024m
F    arg[33] = -Xms2048m
F    arg[34] = -XX:NewSize=410m
F    arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F    arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F    arg[37] = -Djmx.invoke.getters=true
F    arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F    arg[39] = -Djava.security.egd=file:/dev/urandom
F    arg[40] = -Djava.awt.headless=true
F    arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F    arg[42] = -Drdbms.driverLocation=E:\usr\sap\JDT\J03\exe\mssjdbc\jdbc4\sqljdbc4.jar
F    arg[43] = -Djava.io.tmpdir=./temp
F    arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F    arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F    arg[46] = -Dnetworkaddress.cache.ttl=10
F    arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F    arg[48] = -Djco.jarm=1
F    arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F    arg[50] = -XX:+UseConcMarkSweepGC
F    arg[51] = -XX:TargetSurvivorRatio=90
F    arg[52] = -verbose:gc
F    arg[53] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F    arg[54] = -XX:+PrintGCDetails
F    arg[55] = -XX:MaxErrorQueueLength=200
F    arg[56] = -XX:+PrintGCTimeStamps
F    arg[57] = -XX:+DisableExplicitGC
F    arg[58] = -XX:SoftRefLRUPolicyMSPerMB=1
F    arg[59] = -XX:-StringInternTableInPermGen
F    arg[60] = -XX:SurvivorRatio=9
F    arg[61] = -XX:+HeapDumpOnOutOfMemoryError
F    arg[62] = -XX:HeapDumpPath=OOM.hprof
F    arg[63] = -XX:-TraceClassUnloading
F    arg[64] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J (CompilerOracle read from file E:\usr\sap\JDT\J03\exe\sapjvm_6\jre\.hotspot_compiler )
F
F [Thr 4704] Wed Aug 13 10:49:05 2014
F [Thr 4704] *** LOG => SfCJavaVm: Java VM started.
F ********************************************************************************
F Main method call:
F com/sap/engine/boot/Start.main()
F ********************************************************************************
J
J Wed Aug 13 10:49:10 2014
J 5.858: [GC 5.858: [ParNew: 343552K->6707K(381696K), 0.0110668 secs] 343559K->6715K(2059008K), 0.0112063 secs] [Times: user=0.05 sys=0.01, real=0.01 secs]
F
F [Thr 4704] Wed Aug 13 10:49:11 2014
F [Thr 4704] *** LOG => State changed from 0 (Initial) to 1 (Waiting to start).
F [Thr 4704] *** LOG    state real time: 7.229 CPU time: 0.842 sys, 4.430 usr
F [Thr 4704] *** LOG    total real time: 7.229 CPU time: 0.842 sys, 4.430 usr
F [Thr 4704]
F [Thr 4704] *** LOG => State changed from 1 (Waiting to start) to 2 (Starting framework).
F [Thr 4704] *** LOG    state real time: 0.000 CPU time: 0.000 sys, 0.000 usr
F [Thr 4704] *** LOG    total real time: 7.229 CPU time: 0.842 sys, 4.430 usr
F [Thr 4704]
J
J Wed Aug 13 10:49:13 2014
J 9.118: [GC 9.119: [ParNewJ
J Wed Aug 13 10:49:14 2014
: 350259K->16694K(381696K), 0.0233455 secs] 350316K->16751K(2059008K), 0.0235734 secs] [Times: user=0.08 sys=0.00, real=0.02 secs]
J
J Wed Aug 13 10:49:25 2014
J 20.298: [GC 20.298: [ParNew: 360246K->38144K(381696K), 0.1170405 secs] 360668K->62918K(2059008K), 0.1172377 secs] [Times: user=0.39 sys=0.06, real=0.12 secs]
J
J Wed Aug 13 10:49:26 2014
J 21.932: [GC 21.932: [ParNew: 381696K->38144K(381696K), 0.1226817 secs] 407159K->90160K(2059008K), 0.1228570 secs] [Times: user=0.34 sys=0.03, real=0.12 secs]
J
J Wed Aug 13 10:49:28 2014
J 23.292: [GC 23.292: [ParNew: 381696K->38144K(381696K), 0.1285038 secs] 434349K->120556K(2059008K), 0.1286495 secs] [Times: user=0.39 sys=0.05, real=0.13 secs]
J
J Wed Aug 13 10:49:36 2014
J 31.762: [GC 31.762: [ParNew: 381696K->38144K(381696K), 0.1689539 secs] 464356K->161386K(2059008K), 0.1691127 secs] [Times: user=0.42 sys=0.00, real=0.17 secs]
J
J Wed Aug 13 10:49:40 2014
J 35.868: [GC 35.868: [ParNew: 381696K->38144K(381696K), 0.1632272 secs] 508528K->205662K(2059008K), 0.1634124 secs] [Times: user=0.53 sys=0.01, real=0.16 secs]
M
M [Thr 3484] Wed Aug 13 10:49:42 2014
M [Thr 3484] CCMS: openMonitoringSegment(): inside static JMON Lib: already connected.
J
J Wed Aug 13 10:49:42 2014
J 37.824: [GC 37.824: [ParNew: 381696K->38144K(381696K), 0.1195535 secs] 556408K->240492K(2059008K), 0.1197142 secs] [Times: user=0.34 sys=0.02, real=0.12 secs]
J
J Wed Aug 13 10:49:44 2014
J 39.791: [GC 39.791: [ParNew: 381696K->38144K(381696K), 0.1104638 secs] 584213K->264018K(2059008K), 0.1106449 secs] [Times: user=0.30 sys=0.05, real=0.11 secs]
J
J Wed Aug 13 10:49:46 2014
J 41.241: [GC 41.241: [ParNew: 381696K->38144K(381696K), 0.0858888 secs] 607728K->279353K(2059008K), 0.0860546 secs] [Times: user=0.22 sys=0.00, real=0.09 secs]
J
J Wed Aug 13 10:49:47 2014
J 42.977: [GC 42.977: [ParNewJ
J Wed Aug 13 10:49:48 2014
: 381696K->38144K(381696K), 0.0981324 secs] 622984K->301177K(2059008K), 0.0982954 secs] [Times: user=0.25 sys=0.05, real=0.10 secs]
J
J Wed Aug 13 10:49:51 2014
J 46.854: [GC 46.854: [ParNewJ
J Wed Aug 13 10:49:52 2014
: 381696K->38144K(381696K), 0.1648782 secs] 644786K->339134K(2059008K), 0.1650896 secs] [Times: user=0.42 sys=0.03, real=0.17 secs]
J
J Wed Aug 13 10:49:55 2014
J 50.798: [GC 50.798: [ParNew: 381696K->38144K(381696K), 0.0997711 secs] 682851K->358369K(2059008K), 0.0999877 secs] [Times: user=0.33 sys=0.00, real=0.10 secs]
F
F [Thr 4704] Wed Aug 13 10:49:57 2014
F [Thr 4704] *** LOG => State changed from 2 (Starting framework) to 10 (Starting apps).
F [Thr 4704] *** LOG    state real time: 46.538 CPU time: 6.302 sys, 79.810 usr
F [Thr 4704] *** LOG    total real time: 53.768 CPU time: 7.144 sys, 84.240 usr
F [Thr 4704]
J
J Wed Aug 13 10:49:58 2014
J 53.859: [GC 53.859: [ParNew: 381675K->27304K(381696K), 0.0820436 secs] 702190K->368321K(2059008K), 0.0822255 secs] [Times: user=0.22 sys=0.03, real=0.08 secs]
J
J Wed Aug 13 10:49:59 2014
J 54.593: [GC 54.593: [ParNew: 370796K->30046K(381696K), 0.0356657 secs] 711861K->371111K(2059008K), 0.0358375 secs] [Times: user=0.14 sys=0.00, real=0.04 secs]
J
J Wed Aug 13 10:50:00 2014
J 55.192: [GC 55.193: [ParNew: 373594K->30730K(381696K), 0.0258616 secs] 714658K->371794K(2059008K), 0.0260706 secs] [Times: user=0.08 sys=0.00, real=0.03 secs]
J 55.823: [GC 55.823: [ParNew: 374272K->33802K(381696K), 0.0299796 secs] 715337K->374867K(2059008K), 0.0301532 secs] [Times: user=0.11 sys=0.00, real=0.03 secs]
J
J Wed Aug 13 10:50:01 2014
J 56.442: [GC 56.442: [ParNew: 377335K->38144K(381696K), 0.0404834 secs] 718399K->384198K(2059008K), 0.0406513 secs] [Times: user=0.14 sys=0.00, real=0.04 secs]
J 56.760: [GC 56.760: [ParNew: 381679K->31747K(381696K), 0.0536330 secs] 727734K->393582K(2059008K), 0.0538047 secs] [Times: user=0.19 sys=0.02, real=0.05 secs]
J 56.960: [GC 56.960: [ParNewJ
J Wed Aug 13 10:50:02 2014
: 375299K->32769K(381696K), 0.0215789 secs] 737134K->394604K(2059008K), 0.0217479 secs] [Times: user=0.08 sys=0.00, real=0.02 secs]
J 57.116: [GC 57.116: [ParNew: 376282K->35165K(381696K), 0.0226774 secs] 738117K->397000K(2059008K), 0.0228445 secs] [Times: user=0.12 sys=0.00, real=0.02 secs]
J 57.298: [GC 57.298: [ParNew: 378667K->25542K(381696K), 0.0176353 secs] 740502K->387377K(2059008K), 0.0178030 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
J 57.952: [GC 57.952: [ParNewJ
J Wed Aug 13 10:50:03 2014
: 369055K->25609K(381696K), 0.0200687 secs] 730890K->387444K(2059008K), 0.0202358 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
J 58.556: [GC 58.556: [ParNew: 369161K->29706K(381696K), 0.0219467 secs] 731184K->391729K(2059008K), 0.0221159 secs] [Times: user=0.13 sys=0.00, real=0.02 secs]
J
J Wed Aug 13 10:50:04 2014
J 59.099: [GC 59.099: [ParNew: 373258K->33868K(381696K), 0.0272136 secs] 735369K->395979K(2059008K), 0.0273974 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
J 59.680: [GC 59.680: [ParNew: 377420K->34825K(381696K), 0.0259786 secs] 739531K->396936K(2059008K), 0.0261687 secs] [Times: user=0.06 sys=0.02, real=0.03 secs]
J
J Wed Aug 13 10:50:05 2014
J 60.374: [GC 60.374: [ParNew: 378375K->36874K(381696K), 0.0302984 secs] 740486K->398985K(2059008K), 0.0304678 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
J
J Wed Aug 13 10:50:06 2014
J 60.967: [GC 60.967: [ParNew: 380426K->35850K(381696K), 0.0365359 secs] 742537K->402617K(2059008K), 0.0367110 secs] [Times: user=0.12 sys=0.00, real=0.04 secs]
J 61.538: [GC 61.539: [ParNew: 379371K->36873K(381696K), 0.0278477 secs] 746137K->403639K(2059008K), 0.0280496 secs] [Times: user=0.06 sys=0.00, real=0.03 secs]
J
J Wed Aug 13 10:50:07 2014
J 62.134: [GC 62.134: [ParNew: 380425K->35849K(381696K), 0.0351756 secs] 747191K->405862K(2059008K), 0.0353448 secs] [Times: user=0.13 sys=0.00, real=0.04 secs]
J 62.838: [GC 62.838: [ParNew: 379401K->36010K(381696K), 0.0308404 secs] 749414K->407507K(2059008K), 0.0310537 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
F
F [Thr 2264] Wed Aug 13 10:50:09 2014
F [Thr 2264] *** WARNING => ShmComponent_findAlias: Cannot find alias for URL '/' (rc = 4 object not found). [sfxxjshm.c   2141]
J
J Wed Aug 13 10:50:09 2014
J 64.756: [GC 64.756: [ParNew: 379562K->38144K(381696K), 0.0320298 secs] 751059K->411260K(2059008K), 0.0322031 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
J
J Wed Aug 13 10:50:10 2014
J 65.094: [GC 65.094: [ParNew: 381696K->35840K(381696K), 0.0322410 secs] 754812K->411975K(2059008K), 0.0324455 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
J 65.421: [GC 65.422: [ParNew: 379392K->35840K(381696K), 0.0288936 secs] 755527K->411975K(2059008K), 0.0290622 secs] [Times: user=0.06 sys=0.00, real=0.03 secs]
J
J Wed Aug 13 10:50:13 2014
J 68.078: [GC 68.078: [ParNew: 379392K->38144K(381696K), 0.0665893 secs] 755617K->425283K(2059008K), 0.0667646 secs] [Times: user=0.20 sys=0.03, real=0.07 secs]
J
J Wed Aug 13 10:50:16 2014
J 71.438: [GC 71.438: [ParNew: 381696K->38144K(381696K), 0.0932214 secs] 769080K->449195K(2059008K), 0.0933975 secs] [Times: user=0.30 sys=0.00, real=0.09 secs]
J
J Wed Aug 13 10:50:19 2014
J 74.760: [GC 74.760: [ParNew: 380892K->38144K(381696K), 0.1215723 secs] 792334K->477546K(2059008K), 0.1217688 secs] [Times: user=0.36 sys=0.05, real=0.12 secs]
J
J Wed Aug 13 10:50:22 2014
J 77.119: [GC 77.119: [ParNew: 381696K->38144K(381696K), 0.1395760 secs] 822442K->510048K(2059008K), 0.1397643 secs] [Times: user=0.44 sys=0.02, real=0.14 secs]
J
J Wed Aug 13 10:50:26 2014
J 81.788: [GC 81.788: [ParNewJ
J Wed Aug 13 10:50:27 2014
: 381696K->38144K(381696K), 0.0973212 secs] 854255K->529177K(2059008K), 0.0975087 secs] [Times: user=0.30 sys=0.03, real=0.10 secs]
J
J Wed Aug 13 10:50:30 2014
J 85.066: [GC 85.066: [ParNew: 381696K->38144K(381696K), 0.1079331 secs] 872880K->554405K(2059008K), 0.1081130 secs] [Times: user=0.33 sys=0.02, real=0.11 secs]
J
J Wed Aug 13 10:50:32 2014
J 87.365: [GC 87.365: [ParNew: 381696K->38144K(381696K), 0.1150576 secs] 898125K->576973K(2059008K), 0.1152570 secs] [Times: user=0.36 sys=0.01, real=0.12 secs]
J
J Wed Aug 13 10:50:38 2014
J 92.979: [GC 92.979: [ParNew: 381696K->38144K(381696K), 0.1163222 secs] 922696K->601135K(2059008K), 0.1165078 secs] [Times: user=0.39 sys=0.00, real=0.12 secs]
J
J Wed Aug 13 10:50:40 2014
J 95.237: [GC 95.237: [ParNew: 381512K->38144K(381696K), 0.1529282 secs] 944763K->653296K(2059008K), 0.1531081 secs] [Times: user=0.42 sys=0.03, real=0.15 secs]
J
J Wed Aug 13 10:50:42 2014
J 97.178: [GC 97.178: [ParNew: 381687K->38144K(381696K), 0.0974450 secs] 997172K->766960K(2059008K), 0.0976405 secs] [Times: user=0.30 sys=0.08, real=0.10 secs]
J
J Wed Aug 13 10:50:43 2014
J 98.313: [GC 98.313: [ParNew: 381676K->38144K(381696K), 0.0732400 secs] 1110604K->846500K(2059008K), 0.0734242 secs] [Times: user=0.17 sys=0.09, real=0.07 secs]
J
J Wed Aug 13 10:50:44 2014
J 99.587: [GC 99.588: [ParNew: 381696K->38144K(381696K), 0.0753849 secs] 1190093K->908044K(2059008K), 0.0755849 secs] [Times: user=0.16 sys=0.11, real=0.08 secs]
J 99.671: [GC [1 CMS-initial-mark: 869900K(1677312K)] 909812K(2059008K), 0.0247344 secs] [Times: user=0.03 sys=0.00, real=0.02 secs]
J
J Wed Aug 13 10:50:44 2014
J 99.697: [CMS-concurrent-mark-start]
J
J Wed Aug 13 10:50:46 2014
J 100.908: [GC 100.908: [ParNew: 381696K->38144K(381696K), 0.0917262 secs] 1251676K->998042K(2059008K), 0.0919131 secs] [Times: user=0.23 sys=0.09, real=0.09 secs]
J
J Wed Aug 13 10:50:47 2014
J 102.126: [GC 102.126: [ParNew: 381696K->38144K(381696K), 0.1243224 secs] 1341775K->1085661K(2059008K), 0.1245167 secs] [Times: user=0.20 sys=0.25, real=0.13 secs]
J
J Wed Aug 13 10:50:47 2014
J 102.292: [CMS-concurrent-mark: 1.963/2.595 secs] [Times: user=7.71 sys=2.03, real=2.60 secs]
J 102.292: [CMS-concurrent-preclean-start]
J 102.488: [CMS-concurrent-preclean: 0.148/0.195 secs] [Times: user=0.61 sys=0.13, real=0.20 secs]
J 102.488: [CMS-concurrent-abortable-preclean-start]
J
J Wed Aug 13 10:50:48 2014
J 103.579: [CMS-concurrent-abortable-preclean: 0.771/1.091 secs] [Times: user=3.12 sys=0.62, real=1.10 secs]
J
J Wed Aug 13 10:50:48 2014
J 103.582: [GC[YG occupancy: 237047 K (381696 K)]103.583: [Rescan (parallel) , 0.0362884 secs]103.620: [weak refs processing, 0.0384832 secs]103.658: [class unloading, 0.0505195 secs]103.709: [scrub symbol & string tables, 0.0776361 secs]J
J Wed Aug 13 10:50:49 2014
[1 CMS-remark: 1047892K(1677312K)] 1284939K(2059008K), 0.2482807 secs] [Times: user=0.34 sys=0.00, real=0.25 secs]
J
J Wed Aug 13 10:50:49 2014
J 103.830: [CMS-concurrent-sweep-start]
J 104.714: [CMS-concurrent-sweep: 0.768/0.884 secs] [Times: user=2.73 sys=0.47, real=0.89 secs]
J 104.715: [CMS-concurrent-reset-start]
J 104.728: [CMS-concurrent-reset: 0.014/0.014 secs] [Times: user=0.05 sys=0.00, real=0.01 secs]
J
J Wed Aug 13 10:50:50 2014
J 104.828: [GC 104.828: [ParNew: 381696K->38144K(381696K), 0.0671613 secs] 1236693K->918437K(2059008K), 0.0673483 secs] [Times: user=0.19 sys=0.02, real=0.07 secs]
J
J Wed Aug 13 10:50:52 2014
J 107.545: [GC 107.545: [ParNew: 381661K->38144K(381696K), 0.2107511 secs] 1262005K->1077781K(2059008K), 0.2109489 secs] [Times: user=0.39 sys=0.28, real=0.21 secs]
J
J Wed Aug 13 10:50:57 2014
J 112.296: [GC 112.296: [ParNew: 381680K->38144K(381696K), 0.2150438 secs] 1421318K->1251267K(2059008K), 0.2152338 secs] [Times: user=0.25 sys=0.42, real=0.22 secs]
J
J Wed Aug 13 10:51:02 2014
J 117.461: [GC 117.461: [ParNew: 381583K->4140K(381696K), 0.0469289 secs] 1594706K->1254559K(2059008K), 0.0471146 secs] [Times: user=0.11 sys=0.05, real=0.05 secs]
J
J Wed Aug 13 10:51:15 2014
J 130.205: [GC 130.205: [ParNew: 347692K->38144K(381696K), 0.0584412 secs] 1598245K->1290061K(2059008K), 0.0586428 secs] [Times: user=0.22 sys=0.00, real=0.06 secs]
J
J Wed Aug 13 10:51:24 2014
J 139.253: [GC 139.253: [ParNew: 381696K->38144K(381696K), 0.2258658 secs] 1633613K->1373856K(2059008K), 0.2260866 secs] [Times: user=0.61 sys=0.02, real=0.23 secs]
J
J Wed Aug 13 10:51:30 2014
J 145.501: [GC 145.501: [ParNew: 381696K->38144K(381696K), 0.1258713 secs] 1718123K->1422493K(2059008K), 0.1261312 secs] [Times: user=0.39 sys=0.02, real=0.13 secs]
J 145.636: [GCJ
J Wed Aug 13 10:51:31 2014
[1 CMS-initial-mark: 1384349K(1677312K)] 1427189K(2059008K), 0.0535896 secs] [Times: user=0.06 sys=0.00, real=0.05 secs]
J
J Wed Aug 13 10:51:31 2014
J 145.690: [CMS-concurrent-mark-start]
J
J Wed Aug 13 10:51:32 2014
J 147.302: [CMS-concurrent-mark: 1.569/1.612 secs] [Times: user=2.70 sys=0.28, real=1.62 secs]
J 147.303: [CMS-concurrent-preclean-start]
J 147.330: [CMS-concurrent-preclean: 0.024/0.028 secs] [Times: user=0.05 sys=0.00, real=0.03 secs]
J 147.330: [CMS-concurrent-abortable-preclean-start]
F
F [Thr 2264] Wed Aug 13 10:51:36 2014
F [Thr 2264] *** LOG => State changed from 10 (Starting apps) to 3 (Running).
F [Thr 2264] *** LOG    state real time: 98.580 CPU time: 20.670 sys, 143.988 usr
F [Thr 2264] *** LOG    total real time: 152.349 CPU time: 27.814 sys, 228.229 usr
F [Thr 2264]
J
J Wed Aug 13 10:51:37 2014
J   CMS: abort preclean due to time 152.391: [CMS-concurrent-abortable-preclean: 2.924/5.060 secs] [Times: user=4.04 sys=0.58, real=5.08 secs]
J
J Wed Aug 13 10:51:37 2014
J 152.400: [GC[YG occupancy: 246680 K (381696 K)]152.400: [Rescan (parallel) , 0.1940158 secs]152.594: [weak refs processing, 0.0143033 secs]152.609: [class unloadingJ
J Wed Aug 13 10:51:38 2014
, 0.0556606 secs]152.665: [scrub symbol & string tables, 0.0852505 secs] [1 CMS-remark: 1385469K(1677312K)] 1632149K(2059008K), 0.3894964 secs] [Times: user=0.42 sys=0.00, real=0.39 secs]
J
J Wed Aug 13 10:51:38 2014
J 152.790: [CMS-concurrent-sweep-start]
J 153.421: [CMS-concurrent-sweep: 0.631/0.631 secs] [Times: user=0.83 sys=0.00, real=0.63 secs]
J 153.421: [CMS-concurrent-reset-start]
J 153.435: [CMS-concurrent-reset: 0.014/0.014 secs] [Times: user=0.00 sys=0.00, real=0.01 secs]

DPM 2012 R2 Unable to create protection groups after Cluster Migration

Hi Team
we have an issue relating to DPM 2012 R2. In our environment we have a Hyper-V Cluster and we recently did a Cluster Migration since Hyper-V Cluster was upgraded to Windows Server 2012 R2.
Before the upgrade, Windows Server 2008 R2 Cluster was protected by DPM Environment. After we upgraded we are unable to Create new protection Groups existing the new cluster and when we select VMs it's not showing up any members.
Please let us know how we can solve this issue since the Cluster Nodes and the Cluster Name is different from previous Cluster, we were expecting that DPM would allow us to create new Protection Groups while preserving old protection groups for recovery later
if needed.

Hi,
you need to stop the Protection of the old HyperV Datasources
Clear the Cache of the Protectiongroup,
and read the new VM to Protectiongroup
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

Cannot create protection groups from Azure Portal

Similar Messages

Maybe you are looking for