Cannot create sales order as profit center assignment does not take place

Hi,
I am trying to create a sales order but am unable to create it as the profit center value is not picked up the value from material master.And hence, the incompletion log prevents me from creating the sales order. I seem to have done everything correct so far but somehow the profit center field (Account Assignment Tab at item level) remains empty. Instead, i can find the profit center value in "Assignment to Profitability segment".
What should i do so that my sales order picks up the profit center information ?
Thanks in advance.

Hi,
check this link it may helpful,and do search in the forum you may find an existing solution for you problem.
RFBIBL00 - issue in Batch Input Session created
Thanks
Ram

Similar Messages

  • Std report to dispaly Sales Order and Profit center data

    Hi,
    I want to display list of Sales Order and profit center in one report  for that Sales organisation
    Is there any T-code where i can view Sales Order and its Profit center.
    **Plz if anyone knows abt this reply soon.
    Thanks
    AKASH
    Edited by: AKASH TAMBI on May 20, 2008 1:28 PM

    Dear Akash
    There is no standard report to see both the sale order reference and profit center.  However, if you go to SE16 and use table VBAP, you can see the required details
    thanks
    G. Lakshmipathi

  • Partner profit center 855013 does not exist for 8/27/2008

    Hi FI Guys,
    Iam basically MM guy,i need some help on this FI issue.Could you please help any body please.
    Based on the user issue below,i found that thevalid profit center was maintaining in Material master and the G/L account was may not be assigned to G/L account.
    please reply step by step.
    issue from user:
    Iu2019m trying to obsolete some material using MB1A, movement type 951 and the disposal account # 13560002, but after I enter all the information and try to save it I get the following message at the bottom of the screen: u201Cpartner profit center 855013 does not exist for 8/27/2008u201D.
    Thanks&Regards,
    Babu
    09930154536

    Dear Babu,
    The Profit Center of the selected material has expired validity. Just extend the validity through KE52 and press the button 'extend the validity period' to current year. I think that your problem will be solved.
    Trust this helps much!
    Cheers,
    Ashok SINGH

  • Work order to cost center settlement does not post to GL module (FI)

    Dear Expert,
    I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
    When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and  the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
    Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
    Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
    Please advice.
    Thank you.
    KH

    Hi Kiran,
    The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
    Change the cost center from period in the past date and try.
    BR, Srinivas Salpala

  • Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

    We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
    This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

    Hi Kyle A Wilt,
    I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
    Thank you for your understanding and support.
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Profit Center 990612 does not exist in Company Code XYZ

    Dear Friends,
    During the time of posting through t.code F-02 than system is showing the below error :-
    Message no Z1008
    The Profit Center entered does not exist in this company code.
    Enter the correct profiot center which belongs to this company code.
    To search for profit center by comapny code, use matchcode type
    'Z' - Profit Center by company code and name.
    Please advice.
    Thanks & Regards,
    Pankaj

    Hi Pankaj
    This message is a Z message, which means your own creation
    Go to OB28 and check where have you written the Validation step to check this
    Also, check if the PC exists in that comp code or not
    br, Ajay M

  • Error creating sales order via Interaction Center

    While creating a sales order via Interaction Center, I am getting an error "Error while creating member activity for order 5129793", as a result the points are not getting accrued for the account.
    Can anyone please help? I am very new to this
    Regards,
    Harsh

    Hi,
    Check the partner determination profile in spro for this activity. Try to use a standard profile and see what happens.
    Best regards,
    Caíque Escaler

  • Profit Center Substitution does not work in Invoicing of Service Orders

    Hi experts.
    While creating the Quotation (VA23) for Service Orders, the profit center field is populated with the correct profit center via substitution, but while creating the invoice, it is not being populated with any profit center, and hence this result in the posting being made into dummy profit center.
    Could anyone please share some knowledge or info?
    Any help will be greatly appreciated
    Thank you
    Regards, Erwin

    Hi Erwin
    The PC from parent document always flows into the invoice....
    Did you check the account assignment in your invoice VF01 or VF02.? Try to manually update the PC there and see if it posts in the document.. if not, you will have to put a break point in RV60AFZZ and check
    Regards
    Ajay M

  • Settings in sales order item -Profit center

    HI,
      When i create a credit note price with reference to billing docment.At the item level the profit center field is unchangable or grayed out ONLY for the first item and its open for other items.
    Can you please explain me the behaviour of the system why its grayed out for the first and open for the rest?
    where can i see the configuration for sales order item?
    Thanks in advance

    Hi ,
    Please se below docuemnt on thos
    http://help.sap.com/erp2005_ehp_05/helpdata/en/39/afe8e13f1d42c8a34d625f677bee66/frameset.htm
    Many Thanks

  • ERP Sales Order with Profit Center value mandatory in ECC side!

    Hi Experts,
    I'm working with a scenario using SAP CRM 7.0 and ECC 6.0 EHP4, using ERP Sales Order and ERP Quotation.
    The sales order transaction type in ECC side is set up to use profit center at item level as mandatory and I can't find this attribute at Item Details in CRM Webclient. I can't save my order, because this error and the AB Incompletion Log always shows this error.
    Any ideas? Is it possible set profit center value in CRM?
    Best Regards
    Heber Olivar

    Hi Heber!,
    I hope you are doing well.
    We have the same issue, please could you share us how did you resolve this issue?
    We have SAP CRM 7.0 EHP2 and SAP ECC 6.0  and for the creation to ERP Orders correctly in SAP CRM is necessary the profit center value.
    Thanks in advance.
    Best Regards!

  • Profit Center change in Sales Order by Profit Center reorganization

    Dear FI gurus
    I have requirement to change profit center in sales order in mass.
    I heard in EhP5, there is function called "Profit Center Reorganization".
    For my requirement, this function can be used?
    If not, what is this functionality?
    Yoshi

    Hi ,
    Please se below docuemnt on thos
    http://help.sap.com/erp2005_ehp_05/helpdata/en/39/afe8e13f1d42c8a34d625f677bee66/frameset.htm
    Many Thanks

  • Create sales order (return) with reference - PO number not copied

    Hello all,
    I have a question regarding creating a sales order (return, VA01) with the option "create with reference" where a sales order number can be added as reference.
    The system will copy values from the sales order into the return document like the item, the sold-to-party etc.
    The PO Number (customer PO number) is not being copied in our system, so I was wondering if there is a way to tell the system to copy the PO number from the sales order?
    Thanks,
    Anne

    Hi,
    In the transaction code VTAA, select the target and source document types (return order <- sales order) and click on the details button. Check the data transfer routine (the first one for VBAK) assigned here. You may need to clone this routine (in transaction VOFM -> Data transfers -> orders) and create a new routine to add field VBAK-BSTNK into it.
    Check with an ABAP'er for further details.
    Regards,

  • Create Sales Order with ES and LORD throws "not an input field"

    Hello,
    Im am getting the error:: "Field AUART is not an input field"
    I am trying to use the enterprise service: PurchaseOrderRequest_In for creating a Sales Order in ERP. I have done the settings under:
    - (IMG: Sales and Distribution -> Electronic Data Interchange -> EDI Messages -> Configure EDI Partners -> Convert External To Internal Partner Numbers )
    - (IMG: Sales and Distribution -> Electronic Data Interchange -> EDI Messages -> Configure EDI Partners -> Assign Customer/Vendor To Sales Organization Data )
    - Customizing transaction WUFWUF -> Transformations , application CL_PUR_PURCHASEORDER_RQ
    - SD_01 business function is activated
    Now when I send in a message I can monitor the errors in /SAPPO/PPO2 I get a list of errors telling me:
    "Field AUART is not an input field" and the same error for 5 other fields. If I debug the method I can see that the table LORD_MAPPING is read. It also looks like the service actually calls program SAPMV45A with screen 4440. This screen does not contain the fields with error. The errors are caught in
    class: CL_LORD_OBJECT
    Method: DO_IMPORT_MAPPING
    Line: 58-72
    , due to <field_inpmod> eq '0'. This is the input mode for the screen used.
    Any pointers to what I have missed would be greatly appreciated.
    Best regards,
    Emil Jessen

    check function group XVED. Within this function group there are some includes that allows you to change the behavior of SAP while creating the sales order after EDI inbound.
    There are the two includes ZXVEDU03 (to add additional data from the IDOC to the sales order) and ZXVEDU04 (to modify the batch input for creating the sales order). Maybe you can find your fields in here and clear them, so that SAP doesnt try to change the order-type field in EDI processing.
    In case you want to allow certain fields to be editable, check userexit MV45AFZZ form "userexit_field_modification". There you can set fields editable or not.
    Example:
    CASE screen-name.
        WHEN 'VBAP-MVGR3'.
          IF sy-tcode = 'VA01'.
            screen-input = 0. " 0 = field NOT editable, 1 = field editable
          ENDIF.
    ENDCASE.
    Regards
    Ralf

  • While creating sales order got error version "0" is not defined for company

    Hi,
    i got a error  while creating a sales order(va01) ,i got an error
    saying that "version 0(zero) is not defined for company code
    if there is any solution please provide....
    Thanks&regards
    kishore kumar

    Go to TCODE:OKEQ
    1)select version 0 here and ext select settings for each fiscal year under controlling area settings
    2)give your controlling area XXXX and version 0 then enter
    3)select new entries maintain data for new year 2008.
    Hope this will give u
    Sri

  • Profit center report does not show selection criteria

    Hi,
    The SAP Business One software misses a functionality :
    When creating a financial report, you can enter surtain selection criteria in order to shift the data, and in order to get only the relevant data. This is possible in all reports. Also, in the result of all reports, those selection criteria are shown. In that case you actually know what the data is all about.
    This is not the case with the profit center report. When you run the report with e.g a date selection, these dates are not printed on the actual report. When a second person views the report, he/she has no clue as to what the data consists of, they are unaware of the selection criteria.
    The only solution is to export this to excel, or run Chrystal reports. But this should be entered into the standard report !!
    Hopefully, you can help me out.
    Kind regards,
    Bas Stortenbeek
    b1 Consulting
    [email protected]
    0043-664 833 8913

    Hi
    If you see the screen shot I attached, it has the text "(new)" against the Folder name...
    All new gl reports are under such a folder to differentiate... You cant deactivate any reports from the Standard Menu... You can just control it by authrization....
    You can also ask your BASIS guy to display only the authorized trans on the user screen so that they are not able to see the std set of transactions
    Br, Ajay M

Maybe you are looking for