Cannot create solaris 10 zone with flar archive

Hello,
i'm trying to configure a solaris zones with a flar archive of a solaris 10 system.
i've followed the procedure described here : http://www.sun.com/bigadmin/content/submitted/branded_zones_flash.jsp
whenever i try to create a zone and use: set brand=solaris10 the commit will fail with Unknown brand Missing document.
solaris version is Solaris 10 5/08 s10s_u5wos_10 SPARC and i have both the Solaris 8 and Solaris 9 container software installed.
is there another way to install a zone with the native brand or solaris 10 using an archive of some sort?
kind regards,

Thanks,
I've figured as much as using a whole root zone but i still struggle with the configuration of a solaris10 brand and the creation of a zone config with that brand.
I might be bettor of installing the zone without the flar image and try to copy the needed files and applications to the zone.
I only need the solaris10 brand zone to test the flar image so i can use it to restore the system with flar and jumpstart.

Similar Messages

OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]

Hi Guys,
Im trying to create a repository .I have a single node OVM server and have presented two LUN's (Hitachi HUS110 direct attached (via FC))
I've created a server pool and unchecked the clustered server pool. I see the LUN's (physical disk from Oracle Virtual manager) .But when creating the repository i'm having this error
"OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]"
Any steps i missed?Appreciate anyone's input
Regards,
Robert

Hi Robert,
did you actually add the OVS to the server pool, that you created?

Cannot create guest virtual machine with Solaris 10 SPARC in Oracle VM 2.2

Dear All,
I try many times to create guest virtual machine with Solaris 10 SPARC but not get success.
When I created it already and then I start the Power On button, it run normally but the Console button cannot click on (hide). After that the virtual machine running abit then it change status to Powered Off.
Please kindly give advice for this.
Thanks and regards,
Heng

I storgly doubt, VMware player is available for Solaris 10 SPARC version.
Solaris 10 is not a comercial product, like ubuntu, windows, MAC etc... It's really for a server.
That's the reason still I hate Solaris 11 as a desktop. You have very limited product/software.... This may change for Solaris 11, but U can't expect one for Solaris 10.

Cannot create XA data source with MS SQL

Hello,
I am currently trying to create a datasource with he XA transactions support. The exception is the same when I'm using the SYSTEM_DRIVER (NetWeaver is using the MS SQL 2005) and when I'm using the user-defined MS SQL JDBC driver. The 'regular' (using tag <jdbc-1.x>) datasources are successfully created, the problem appears only for the XA one.
This is the part of my data-sources.xml responsible for this data source:
<data-source>
        <data-source-name>DataSource/SCP</data-source-name>
        <driver-name>SYSTEM_DRIVER</driver-name>
        <init-connections>5</init-connections>
        <max-connections>25</max-connections>
        <sql-engine>Vendor_SQL</sql-engine>
        <jdbc-2.0>
            <xads-class-name>com.microsoft.sqlserver.jdbc.SQLServerXADataSource</xads-class-name>
            <object-factory>com.microsoft.sqlserver.jdbc.SQLServerDataSourceObjectFactory</object-factory>
           <properties>
                <property>
                    <property-name>serverName</property-name>
                    <property-value>localhost</property-value>
                </property>
                <property>
                    <property-name>databaseName</property-name>
                    <property-value>SCP</property-value>
                </property>
                <property>
                    <property-name>port</property-name>
                    <property-value>1433</property-value>
                </property>
                <property>
                    <property-name>user</property-name>
                    <property-value>myUser</property-value>
                </property>
                <property>
                    <property-name>password</property-name>
                    <property-value>myPassword<property-value>
                </property>
            </properties>
        </jdbc-2.0>
    </data-source>
Below you can see the stacktrace that appears in the defaultTrace_00.trc:
Text: [ERROR CODE DPL.DS.5029] Exception in operation startApp with application se.sync/BPE.
Reason : [ERROR CODE DPL.DS.5029] Exception in operation startApp with application se.sync/BPE.
[EXCEPTION]
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5029] Exception in operation startApp with application se.sync/BPE.
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.rollbackPart(ApplicationTransaction.java:521)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:422)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
     at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
     at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
     at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
     at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
     at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
     at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:877)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot create DataSource "DataSource/SCP".
     at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1467)
     at com.sap.engine.services.dbpool.deploy.ContainerImpl.prepareStart(ContainerImpl.java:468)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:219)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     ... 30 more
Caused by: java.lang.NullPointerException
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:164)
     at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1394)
     ... 34 more
When I'm looking at the \usr\sap\EE5\J00\exe\mssjdbc\sqljdbc.jar file, I can see both these classes (SQLServerXADataSource and SQLServerDataSourceObjectFactory), so the problem is probably somewhere else. As the exception comes from the native method - does it mean, that the XA extension is not installed correctly on the server (as described [here|http://technet.microsoft.com/en-us/library/aa342335(SQL.90).aspx])?
Thanks for any help!
Best Regards,
-Milosz

Ok, just to share - the solution was as follows:
remove the object-factory element
change property name "port" to "portNumber"
So, the correct data-sources.xml is as follows:
<data-source>
     <data-source-name>DataSource/SCP</data-source-name>
     <driver-name>SYSTEM_DRIVER</driver-name>
     <init-connections>5</init-connections>
     <max-connections>25</max-connections>
     <sql-engine>Vendor_SQL</sql-engine>
     <jdbc-2.0>
         <xads-class-name>com.microsoft.sqlserver.jdbc.SQLServerXADataSource</xads-class-name>
         <properties>
             <property>
                 <property-name>serverName</property-name>
                 <property-value>localhost</property-value>
             </property>
             <property>
                 <property-name>databaseName</property-name>
                 <property-value>SCP</property-value>
             </property>
             <property>
                 <property-name>portNumber</property-name>
                 <property-value>1433</property-value>
             </property>
             <property>
                 <property-name>user</property-name>
                 <property-value>myUser</property-value>
             </property>
             <property>
                 <property-name>password</property-name>
                 <property-value>myPassword<property-value>
              </property>
         </properties>
     </jdbc-2.0>
</data-source>
And this works.

Cannot create Power View reports with HelloWorldPicnicPowerViewRTM.xlsx

I have uploaded HelloWorldPicnicPowerViewRTM.xlsx to Power Pivot Gallery on SharePoint 2013 and SQL Server 2012.
I have clicked Create Power View Reports, but there is error with connection.
I'm trying to follow instructions on
http://technet.microsoft.com/en-us/library/hh759325.aspx
<detail><ErrorCode xmlns="rsCannotRetrieveModel</ErrorCode><HttpStatus">http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus
xmlns="400</HttpStatus><Message">http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="An">http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'http://servername/sites/bi/powerview/PowerPivotGallery/HelloWorldPicnicPowerViewRTM.xlsx'. Verify that the connection information is correct and that you have permissions to access the data
source.</Message><HelpLink xmlns="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName">http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="Microsoft">http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="11.0.3128.0</ProductVersion><ProductLocaleId">http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="127</ProductLocaleId><OperatingSystem">http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="OsIndependent</OperatingSystem><CountryLocaleId">http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="1033</CountryLocaleId><MoreInformation">http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="<Source>ReportingServicesLibrary</Source><Message">http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="An">http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'http://servername/sites/bi/powerview/PowerPivotGallery/HelloWorldPicnicPowerViewRTM.xlsx'.
Verify that the connection information is correct and that you have permissions to access the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection"
msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="Cannot">http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Kenny_I

Hi Kenny_I,
Based on the error message, the issue may be caused by the incorrect configuration of Claims to Windows Token Service (C2WTS). The C2WTS is required because the communication between the web front-end (WFE) and the Reporting Services shared service will
always be Claims authentication.
The domain account used by the Claims to Windows Token Service needs to be granted the following rights through the Local Security Policy:
Act as part of the operating system
Impersonate a client after authentication
Log on as a service
We can find these settings under Administrative Tools > Local Security Policy > Local Policies > User Rights Assignment. And we should add the service account to the local Administrators Groups ahead.
For more information, please see the following links:
http://www.codeovereasy.com/2014/01/powerview-report-fails-no-credentials-are-available-in-the-security-package/
http://msdn.microsoft.com/en-us/library/hh231678.aspx
Hope this helps.
Thanks,
Katherine xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

"Unable to save markup: Cannot create output file" message with ISDK

Hi,
We have an integration of AutoVue with OpenText Livelink, and we're seeing that if users open a document, and then work on adding mark-ups for a long time (3 hours) without saving the mark-up when the user saves the markup they get an error message "Unable to save markup: Cannot create output file". If they then press the save button they get the out-of-the-box AutoVue 'Save Markup File As' dialog.
The ISDK DMS integration servlet and VueServlet servlet are both running under Tomcat with 740 minute session timeout set for the servlet.
When we look at the logs we're not seeing any attempts to save the mark-up, which is confusing.
It looks as though the link between the AutoVue applet and the DMS has been lost.
Is it possible to specify session time-outs in the AutoVue applet?
Is there a way of checking keep-alives are being sent (if they are ever sent)?
Help appreciated!
Thanks
Paul

AutoVue default timeout is 30 minutes and is being controlled by the option jvueserver.users.timeout (value set in seconds, default is 1800).
Adding to the jvueserver.properties the following line:
jvueserver.users.timeout=50400
would set AutoVue session timeout to 14 hours (longer than Tomcat session).
If the issue still persists, the AutoVue session timeout is probably not the cause...
Edited by: user739124 on Dec 4, 2012 12:02 PM

Solaris 10 physical to Solaris 10 zones via flash archive

Hi,
I need to migrate E25K domains (all Solaris 10) to zones on an M9000. The solution architect has suggested zones on the M9000 made from flash archives of the source E25K domains for speed & simplicity (read : avoid a rebuild of the application environment and all that entails). But as best I can tell, you can only use flash archives to provision zones as part of the branded zones architecture and it does not include SOlaris 10.
As best I can tell, this is not possible - at least not in a supported way; I have seen some blogs that have hacks for making a zone from a solaris 10 flash archive but I can't do that sort of thing here.
Is my view correct? If it is, is there any timeframe for Solaris 10 P2V?
I am aware that OpenSolaris now supports Solaris (TM) as a branded zone but that will not help me here.
TIA
Steve

You log an RFE the same way you log a bug with Sun/Oracle, by calling the Support Center. For that, you would need a support contract or server serial number. If you have a relationship with a Sun/Oracle sales team, you may also be able to speak with them directly and ask if they could open the call on your behalf. The call that you open is investigated and may be determined by Sun/Oracle to be an RFE. I think I mentioned earlier that the Solari10 P2V may already have been requested by various customers, but it is always good to log the call and have yourself added as an interested party.

Partial Install of base pkgs upon creating Solaris 10 zone

Greetings,
I have this weird situation when attempting to create a zone. Hoping I can get a bit of insight as to a resolution here.
The procedure I follow is:
root@was07:/root
zonecfg -z was07zonewas07zone: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:was07zone> create
zonecfg:was07zone> set autoboot=true
zonecfg:was07zone> set zonepath=/was07zone
zonecfg:was07zone> add net
zonecfg:was07zone:net> set address=xxx.xxx.xxx.107
zonecfg:was07zone:net> set physical=ce0
zonecfg:was07zone:net> end
zonecfg:was07zone> info
zonepath: /was07zone
autoboot: true
pool:
inherit-pkg-dir:
dir: /lib
inherit-pkg-dir:
dir: /platform
inherit-pkg-dir:
dir: /sbin
inherit-pkg-dir:
dir: /usr
net:
address: xxx.xxx.xxx.107
physical: ce0
zonecfg:was07zone> verify
zonecfg:was07zone> commit
zonecfg:was07zone> exit
root@was07:/root
zoneadm -z was07zone installPreparing to install zone <was07zone>.
Creating list of files to copy from the global zone.
Copying <12701> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <937> packages on the zone.
Initialized <937> packages on zone.
Zone <was07zone> is initialized.
Installation of these packages generated warnings: <SUNWocfd SUNWkvm SUNWcsl SUNWcsr SUNWzlib SUNWgss SUNWopenssl-libraries SUNWsshcu SUNWsshdu SUNWperl584core SUNWperl584usr SUNWesu SUNWlibC SUNWlibms SUNWlexpt SUNWwbsup SUNWswmt SUNWbzip SUNWxwdv SUNWcpp SUNWctpls SUNWtecla SUNWtftp SUNWpr SUNWtls SUNWtnamd SUNWkrbu SUNWtnetc SUNWtnetd SUNWtoo SUNWudaplu SUNWudapltu SUNWudf SUNWnfscu SUNWlxml SUNWocf SUNWgzip SUNWadmlib-sysid SUNWadmap SUNWmdu SUNWadmc SUNWbip SUNWrcmdc SUNWrcmds SUNWscpu SUNWnisu SUNWfmd SUNWmdb SUNWpiclu SUNWlccom SUNWbsu SUNWnfssu SUNWidnl SUNWluxop SUNWadmfw SUNWinst SUNWipc SUNWipfu SUNWipmi SUNWiscsiu SUNWloc SUNWatfsu SUNWauda SUNWcfcl SUNWcfpl SUNWpcu SUNWpsu SUNWcnsu SUNWjfcau SUNWjss SUNWkey SUNWlibCf SUNWdtrc SUNWlibsasl SUNWllc SUNWlldap SUNWfchba SUNWfcmdb SUNWflexruntime SUNWftpu SUNWpkgcmdsu SUNWqusu SUNWrmodu SUNWroute SUNWsndmu SUNWsshu SUNWter SUNWgcmn SUNWtiu8 SUNWdoc SUNWvolu SUNWadmj SUNWwbapi SUNWaudit SUNWjsnmp SUNWwbcou SUNWjhrt SUNWwbpro SUNWxcu4 SUNWxcu6 SUNWeurf SUNWmgapp SUNWpmu SUNWowbcp SUNWlxsl SUNWzip SUNWsmbau SUNWscplp SUNWpool SUNWzoneu SUNWcpcu SUNW1251f SUNWGlib SUNWGtku SUNWTcl SUNWfruid SUNWfruip SUNWTk SUNWimagick SUNWbash SUNWpsutils SUNWa2psu SUNWbcp SUNWgsfot SUNWgsfst SUNWhpijs SUNWgimpprint SUNWgscr SUNWrsg SUNWgssdh SUNWgtar SUNWhiu8 SUNWhmdu SUNWiniu8 SUNWpapi SUNWippcore SUNWislcc SUNWisolc SUNWaudf SUNWciu8 SUNWjiu8 SUNWkiu8 SUNWbart SUNWbind SUNWgccruntime SUNWjcom SUNWppm SUNWpsf SUNWctlu SUNWjib SUNWffiltersu SUNWsmapi SUNWmdau SUNWfppd SUNWfss SUNWmibii SUNWsasnm SUNWsadmi SUNWmlib SUNWggrp SUNWntpu SUNWopenssl-commands SUNWpamsc SUNWpcsclite SUNWpsm-lpd SUNWqosu SUNWrcapu SUNWrmwbu SUNWscbcp SUNWscmhdlr SUNWslpu SUNWsmagt SUNWsmbac SUNWsmcmd SUNWtcatu SUNWtcpd SUNWprd SUNWtcsh SUNWpl5u SUNWtexi SUNWtlsd SUNWtlsu SUNWtnfc SUNWtnfd SUNWucbt SUNWugenu SUNWusbu SUNWwbdev SUNWwbdoc SUNWwbmc SUNWwebminu SUNWwgetu SUNWsprot SUNWxcu4t SUNWxsrt SUNWxrgrt SUNWxrpcrt SUNWmga SUNWrmui SUNWsadml SUNWypu SUNWzebrau SUNWzsh SUNW1394h SUNWaccu SUNWgpch SUNWpstl SUNWhea SUNWant SUNWapch2u SUNWapch2d SUNWapchu SUNWapchd SUNWbtool SUNWapct SUNWarc SUNWdclnt SUNWdhcsu SUNWdhcm SUNWipplu SUNWiqfs SUNWiquc SUNWiqum SUNWiqdoc SUNWladm SUNWiqjx SUNWfsmgtu SUNWdmgtu SUNWlvma SUNWlvmg SUNWiqu SUNWjhdev SUNWjato SUNWmctag SUNWmcon SUNWast SUNWpprou SUNWaudh SUNWbinutils SUNWbison SUNWbnuu SUNWcdrw SUNWjatodoc SUNWjatodmo SUNWjaxp SUNWcstl SUNWjhdem SUNWdfbh SUNWdhcsb SUNWdpl SUNWkdcu SUNWless SUNWlibm SUNWlibusb SUNWlibusbugen SUNWfac SUNWmcos SUNWflexlex SUNWmcosx SUNWmdbdm SUNWmddr SUNWftduu SUNWgcc SUNWmipu SUNWmkcd SUNWmlibe SUNWmlibh SUNWgm4 SUNWgmake SUNWmysqlu SUNWmysqlt SUNWncau SUNWncft SUNWocfh SUNWopenssl-include SUNWopenssl-man SUNWosdem SUNWpcsclite-devel SUNWpdu SUNWpiclh SUNWpl5v SUNWpl5p SUNWpmgr SUNWpppd SUNWpppdu SUNWpppdt SUNWpppg SUNWppro-plugin-sunos-base SUNWrpm SUNWrsm SUNWseru SUNWserweb SUNWsfdoc SUNWsfinf SUNWsfman SUNWsfwdemo SUNWsfwhea SUNWsmdoc SUNWspnego SUNWsra SUNWsrh SUNWcsu>
The file </was07zone/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
All of the errors in the above log look like this:
*** package <SUNWcsr> installed with warnings:
pkgadd: ERROR: unable to create package object </was07zone/root/usr>.
unable to fix attributes
Installation of <SUNWcsr> on zone <was07zone> partially failed.
I have performed this procedure on 8 identical machines in the past week with no problems, except this one.
uname -aSunOS was07 5.10 Generic_118822-23 sun4u sparc SUNW,Sun-Fire-V440
cat /etc/releaseSolaris 10 3/05 s10_74L2a SPARC
Copyright 2005 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 22 January 2005
Now I can finish the the install and boot the zone just fine, but those packages are listed as partially installed, thusly when they are a prereq for any application, the application install fails with dependancy issues. If I try to install those pkgs, the dependancy loop gets very deep.
Plus I know that this isnt the expected results of my command chain above.
TIA for any assistance that can be provided.

One cant perform a zoneadm -z was07zone install
if the permissions on the zonepath are other than 700, correct?
/was07zone with permisisons=777
/was07zone must not be group readable.
/was07zone must not be group writable.
/was07zone must not be group executable.
/was07zone must not be world readable.
/was07zone must not be world writable.
/was07zone must not be world executable.
could not verify zonepath /was07zone because of the above errors.
zoneadm: zone was07zone failed to verify
/was07zone with permissions=755
/was07zone must not be group readable.
/was07zone must not be group executable.
/was07zone must not be world readable.
/was07zone must not be world executable.
could not verify zonepath /was07zone because of the above errors.
zoneadm: zone was07zone failed to verify
/was07zone with permissions=744
/was07zone must not be group readable.
/was07zone must not be world readable.
could not verify zonepath /was07zone because of the above errors.
zoneadm: zone was07zone failed to verify
/was07zone with permissions=711
/was07zone must not be group executable.
/was07zone must not be world executable.
could not verify zonepath /was07zone because of the above errors.
zoneadm: zone was07zone failed to verify
I did open up another terminal window while creating the zone.. and /was07zone/root is created with permisisons of 755

Cannot create an OracleConnection programmatically with C#

Using Visual Studio 2008 and C# on a Windows VISTA SP1 development machine. I have installed the latest InstantClient and the additional SQLPlus files on the dev machine then followed install instructions to the best of my knowledge.
I am working on a windows application that uses ODP and I also want to use the Oracle 11g ODAC 11.1.0.6.21 with Xcopy Deployment for the clients. I have run the install batch file with the "all" command and used the defaults, then I added the paths to the windows system path varible. I want to use the EZCONNECT connection string. I keep reading the following :
"All you need to do is add/modify this to your sqlnet.ora
NAMES.DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
And now you can use the following syntax to connect
sqlplus user/password@//host:[port]/service name"
but I do not see this in the XCOPY deployment instructions. Am I missing something? Do I need to create this sqlnet.ora file and where does it get put if it is needed. Or is it needed at all?
Update : When I try to create a new OracleConnection in C# code, I get a "Connection string is not well-formed" error.
This line of code is failing with the error : Oracle.DataAccess.Client.OracleConnection cn = new Oracle.DataAccess.Client.OracleConnection( "SCOTT/password@MyServer/ORCL")
I have tried this connection string in both of the below formats with the same results:
1) CONNECT SCOTT/password@MyServer/ORCL
2) SCOTT/password@MyServer/ORCL
I did download the SQLPlus that matches this version of InstantClient and it does work with this command line :
1) C:\oracle\sqlplus.exe SCOTT/password@MyServer/ORCL
I am able to query the Emp table in the Scott schema and get records back. What am I missing here? Why will SQLPus work and my applicaion not. Do I have to do something on the sqlnet.ora file with EZCONNECT as the above post states.
Need some help from you Oracle gurus out there. I know some of you have run into this. Thanks...
Steve Graddy MCP, MCAD.Net
Orgbrat Consulting

Hi guys to keep from cross posting, I would like to point this thread to this thread which has a solution but not an explanation.
ODP with Instant Client
I wish some of you Oracle gurus could explain to me why the EZCONNECT format connect string will not work from within ODP.Net after viewing the above thread. Thanks...
Steve Graddy MCP, MCAD.Net
Orgbrat Consulting

Cannot create TransactionParams of ConnectionFactory with WLST Offline

Hello dear WL users and geeks,
I'm trying to automate the creation of a weblogic domain using WLST Offline but I've got some problem with the configuration of a JMS ConnectionFactory : I don't know how to activate the XA-Connection factory setting.
Ok, here is the WLST code, results and thoughs are in comments (##) :
==================
## I start with a fresh install of Oracle Weblogic Server 11g R1 (10.3.3) (also tried 10.3.1, same problem) and use the Configuration Wizard to
## create a new Weblogic domain using the default "Basic Weblogic server domain template".
## First, read the domain
readDomain('Oracle/Middleware/user_projects/domains/base_domain/')
## Create a JMSServer
create('MyJMSServer', 'JMSServer')
assign('JMSServer', 'MyJMSServer', 'Server', 'AdminServer')
## Create a JMS Module
create('TestModule', 'JMSSystemResource')
## And now a ConnectionFactory
cd('/JMSSystemResource/TestModule/JmsResource/NO_NAME_0')
fact=create('TestConnFactory', 'ConnectionFactory')
fact.setJNDIName('someJNDIName')
updateDomain()
## Ok, let's see what is defined :
cd ('/JMSSystemResource/TestModule/JmsResource/NO_NAME_0/ConnectionFactory/TestConnFactory')
ls()
## -rw- DefaultTargetingEnabled false
## -rw- JNDIName someJNDIName
## -rw- LocalJNDIName null
## -rw- Name TestConnFactory
## -rw- Notes null
## -rw- SubDeploymentName null
## Uh oh. Why are the 'directories' TransactionParams and SecurityParams missing ? How am I supposed to edit the TransactionParams ?
## Maybe there is a createTransactionParams method ?
dir(fact)
## ['JNDIName', 'class', 'clientParams', 'defaultDeliveryParams', 'defaultTargetingEnabled', 'equals', 'flowControlParams', 'getClass',
## 'getClientParams', 'getDefaultDeliveryParams', 'getFlowControlParams', 'getInvocationHandler', 'getJNDIName', 'getLoadBalancingParams',
## 'getLocalJNDIName', 'getName', 'getNotes', 'getProxyClass', 'getSecurityParams', 'getSubDeploymentName', 'getTransactionParams',
## 'hashCode', 'isDefaultTargetingEnabled', 'isProxyClass', 'isSet', 'loadBalancingParams', 'localJNDIName', 'name', 'newProxyInstance', 'notes',
## 'notify', 'notifyAll', 'securityParams', 'setDefaultTargetingEnabled', 'setJNDIName', 'setLocalJNDIName', 'setName', 'setNotes',
## 'setSubDeploymentName', 'subDeploymentName', 'toString', 'transactionParams', 'unSet', 'wait']
## If I try to invoke any method related to transactionParams, I've got a null pointer exception
==================
Ok, now I'll use the web admin console to edit the transaction parameters : I start the Weblogic Server and go to the web-based Administration console.
In the Domain Structure tree, I go to base_domain > Services > Messaging > JMS Modules.
Then I click on my 'TestModule' module and then on my 'TestConnFactory' Connection Factory.
I go in the 'Transaction' tab and I enable the XAConnectionFactory checkbox.
Finally, I click on the save button.
Let's start a new WLST Offline session and see what's new :
==================
## Read the domain
readDomain('Oracle/Middleware/user_projects/domains/base_domain/')
## Check what is defined in my ConnectionFactory
cd ('/JMSSystemResource/TestModule/JmsResource/NO_NAME_0/ConnectionFactory/TestConnFactory')
ls()
## Hey look, the TransactionParams appeared :
## drw- TransactionParams
## -rw- DefaultTargetingEnabled true
## -rw- JNDIName someJNDIName
## -rw- LocalJNDIName null
## -rw- Name TestConnFactory
## -rw- Notes null
## -rw- SubDeploymentName null
## Go in there :
cd('TransactionParams/NO_NAME_0')
ls()
## -rw- TransactionTimeout 3600
## -rw- XAConnectionFactoryEnabled true
==================
So :
- Why the TransactionParams setting is not directly created or available when a new ConnectionFactory is created ?
- How can I create a JMS ConnectionFactory and edit its TransactionParams using only WLST Offline (i.e., without the admin console and without WSLT online) ?
Any help appreciated,
Thanks !

Ok, I found a solution :
=============
cd ('/JMSSystemResource/TestModule/JmsResource/NO_NAME_0/ConnectionFactory/TestConnFactory')
create('DUMMY', 'TransactionParams')
ls('TransactionParams/NO_NAME_0')
## -rw- TransactionTimeout 0
## -rw- XAConnectionFactoryEnabled false
=============
But it seems strange to have to create a dummy TransactionParams. Is it the correct way to do it ?

Cannot create Kodak Photo Book with Elements 8

I'm trying to create a Kodak Photo Book with Elements 8. My system gets stuck in an eternal loop at the initial CREATE stage:
(Screen 1)
CREATE
What would you like to create?
Photo Book
(Screen 2)
Order Kodak Photo Book
Back to screen 1. Same is true if I select anything other than "Print with Local printer..."
Only resolution I can think of is to go back to Elements 7

Hi,
Can you please tell me your online services location. To find that out, you need to go to the Organizer. Go toEdit>Preferences>Adobe Partner Services. Click the "Choose" button for location and there you will find your online services location. It should be US & Canada for Kodak Photobook services to work.
Also can you please let me know whether you are trying to do this in organizer or Editor?
Best Regards,
Chhaya

Cannot create any PDF docs with Acrobat Pro 7.0

I have Adobe Acrobat Pro 7.0 running on Microsoft XP. All of a sudden, I cannot
convert any documents into PDFs. I have tried converting Microsoft Word
docs and those from other applications. It is important to stress that I
have managed to do this many times in the past, but for some reason Acrobat
has suffenly stopped doing this. I have tried 'printing' to PDF and
'converting' to PDF. Each time I get the following error message on a
'Notepad':
"%%[ Error: undefined; OffendingCommand: setdistillerparams; ErrorInfo:
CalCMYKProfile U.S. Web Coated (SWOP) v2 ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
Error accessing color profile: U.S. Web Coated (SWOP) v2
%%[ Warning: PostScript error. No PDF file produced. ] %%"
I have clicked on 'Detect & Repair' under the 'Help' menu button in Adobe
Acrobat and this supposedly did some form of reinstalling/fixing (without
the need for a CD to be inserted into the computer) and asked me to turn off
my computer & then turn it back on.
Having done this, I still cannot get docs to convert to PDF.
I have not added any particular hardware or software to my computer in
recent times. Apart from the PDF conversion, everything else in Adobe
Acrobat Pro seems to run fine. I can read all documents etc.
Can you help me?
Thanks,
Alan

OK, I've got everything to work - so long as I 'Print' docs to PDF rather than clicking on the PDF conversion icons (if I click on these icons, I just get an error).
But if I print to PDF, everything now works - I've even managed to solve the Word problem - I think it was a faulty Word doc for some reason. I found a useful document which told me how to set up all the settings for Acrobat Distiller (http://mydocs.epri.com/docs/CorporateDocuments/WorkingWithEPRI/CreatingAcrobatPDFs.pdf).
If you know how to make the PDF conversion icons work (it must be something simple) that'll save me having to print each time, it would be great, but I can survive without this.

Cannot Create a New Enhancement with SMOD

Hi Gurus,
I can't find any buttons/functions to create a new enhancement in SMOD, ECC 6. Does SAP disallow people to create new a new enhancement in ECC 6.0?

Enhancement are nothing but Badi ( Other way round ) if you want to add a Enhancement in your Code try and implement a Custom Badi ...and then have as many implimentation for the badi...!
OR refer the below like .....
http://help.sap.com/saphelp_nw04s/helpdata/en/3b/0a39426f79f83ae10000000a1550b0/content.htm

Cannot create a new project with iMovie. Operation could not be completed. No solution to the problem is available.

Every time I go to create a new project in the latest version of iMovie for mac OS X yosemite, I get the following information. "The operation could not be completed. No further information is available about the problem.
I have tried restarting the computer, that didn't work. I also tried also, to reinstall the app. That didn't work. I even tried updating all the software, and that still didn't work. I am very frustrated and feel the mac was not a good gift, if a major essential app will refuse to work. Nothing I do, seems to work.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

Cannot create a WDS network with two Airport Express

so i have one airport express here at my parents house acting as a wireless router. i brought a second express from my house and my playstation3 and want to connect the ps3 via Ethernet, i reset my express from home by holding the small pin-sized button. i open up airport utility choose the default named airport express, hit continue>switch>name it and give it a password>I want it to join my current network>Extend the Range of my Network>Chose my network (Twice)>watch the 'configure' WDS screen. then i get this:
http://farm4.static.flickr.com/3632/3420465586a2f1864300o.png
both expresses have been recently updated with 6.3 firmware and i'm accessing both wirelessly. i've tried over and over again resulting in the above image, can anyone please help?
btw there is no 'allow this network to be extended' box.

Psych,
Do the setup hard wired to your Mac - so connect an ethernet cable between your Mac and the AX you're trying to set up. Do the setup as usual, and once the configuration has written to the AX, restarted and you have a green light, you can remove the cable and connect wirelessly.
Sometimes, and for some reason, the configuration has problems writing to the AX wirelessly, especially after a reset.

Cannot create solaris 10 zone with flar archive

Similar Messages

Maybe you are looking for