Cannot create transfer rules

Hello,
I activated the datasource 0UC_MTR_DOC in the source system and replicated the same into BI. But in BI the datasource shows as inactive. Then I went to the Tcode rsds and activated the datasource.
And then I activated the Business content infosource, 0UC_MTR_DOC, and then when trying to create a transfer rules to link the infosource and datasource, the system does not give me an option of 0UC_MTR_DOC, as the datasource. Why is this happening? I am confused. I tried creating a transformation, but even then I get the message that 'Transfornmation does not exist'.
Please help. Points will be awarded to helpful answers.
Regards,
Prince

Hi Prince,
If you want to replicate it as 3.x, you just go to RSA1 - DataSources and delete the datasource. Then, replicate it again, and when you are prompted for the Datasource type selection, select 3.x. Then, you should be able to activate Business Content and connect.
Then, you migrate the Update rules, InfoSource, Transfer rules and Datasource.
Hope this helps.
Regards,
Diego

Similar Messages

Error in creating transfer rules beween infosource and datasource in BI 7.0

Hello Guys
I am gettting the following error when trying to create transfer rules between infosource and datasource.
1. Error while activating transformation
2. Deletion of Objects with Type Transformation
3. Preprocessing/Collecting DDIC Objects for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
4. Post Processing/Checking the Deletion for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
5. Object Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K has been deleted
6. Name of object of type 'TRCS' is missing
7. Name of object of type 'TRCS' is missing
8.Key rule 1 (target field: 0COMP_CODE): Initial update set
9. Key rule 2 (target field: 0PLANT): Initial update set
10. Key rule 3 (target field: 0OI_EBELN): Initial update set
11. Key rule 4 (target field: 0AC_DOC_NO): Initial update set
12. No rule exists
13. Saving Objects with Type Transformation
14. Saving Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
15. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K saved successfully
16. Activation of Objects with Type Transformation
17. Saving Objects with Type Transformation
18. Internal Activation (Transformation )
19. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
20. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
21. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
22. Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)
23. Error during generation
24. Error when activating Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
25. Resetting of Incorrect Objects Back to the Active Version (Transformation )
26. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
27. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
28. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
29. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was reset to the active version
Can anyone send me a document on how to create cubes, info and data sources,ODS's,multicubes and t/f and update rules in BI 7.0
Thanks.

Transformations in BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Regards,
R.Ravi

Error while creating transfer rules.

Hi
I am creating transfer rules and a error message says " IS_00_BB does not exist". (IS_00) is the desc. of the info source)
can someone help me on this????
I had created transfer rules for another cube in the same info area, but no error had come then..
Thanks.
Aswath.

Hello,
The problem you are reporting could be that you are using the Transfer
Method 'IDOC' for the affected transfer rule(s). You should use the
'PSA' transfer method (rather than the 'IDOC' method), as the IDOC
method is very old.
If so, please change the transfer method in the affected transfer rules
to 'PSA', then try to activate the transfer structure again. This should
solve the problem, in which case, please let us know by clicking on the
'Close' button.
If the problem persists please create the report that is relevant for your system release
as per the SAP note 493422 and execute the report in your system, the report can be
created in se38, please talk to your basis team if you have problems creating the report.
Best Regards,
Des

Cannot transport transfer rules!

Hi,
We have a problem transporting the transfer rules from BWD to BWQ.
Here are the steps I did :
New object ZZRANK was added to user exit on R/3 dev. and transported
New infor object ZZRANK was created in BWD
ZZRANK was added as attribute to 0PLANT (mater data)
Transfers were created and comm struc updated.,
testing was successful in Dev, r3 changes were transported to Q and BWD transports to BWQ. ALL info objects transported successfull but the transfer rules failed. Cannot determine why.,
   Start of the after-import method for object type R3TR ISMP (Activation Mode)
   Mapping between data source 0PLANT_ATTR and source system PR2200LS is inconsistent
   Field ZZRANK will not be delivered from DataSource 0PLANT_ATTR in source system PR2200LS
   Mapping between data source 0PLANT_TEXT and source system PR2200LS is inconsistent
   Field KEY1 will not be delivered from DataSource 0PLANT_TEXT in source system PR2200LS
   Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
   The errors affect the following components:
      BW-WHM (Warehouse Management)
Any help is appreciated.

You may have to replicate your data source on BWQ.
First replicate and then send your transport again from BWD to BWQ.
Regards.
Sanjay
Message was edited by:
        Sanjay Sinha

Cannot Create Update Rule from Infosource to Cube

Hello;
I am a beginner to BI and am learning. This may be a very basic question, but I got stuck.
In the create update rule screen, I get an error message that says
Data Source (whatever the name is) not maintained. (check your entries)
Could some one help as to where I went wrong?
Thx,
Sushma
Su

Goto your InfoSource and open DataSource Structure and transfer structure. Check if the structure is correct, make the necessary changes if required and activate it. Then create update rules providing correct infosource name. Until you create /activate your transfer structure, you won't be able to create update rules.
Reward point if helps.
Regards,
Ashok
Message was edited by:
ashok saha

Cannot See Transfer Rules in Transport Connection

Hello,
I have searched Notes and Forums and have not found a solution for this!
I performed some configuration in our newly upgraded BI system. We
were on BW 3.5 and upgraded to BI 7.0
We also change how our landscape was interconnected.
Our BW Dev system used to connect to our R3 Sandbox system.
Now our BIDev system connects to our ECC Dev system.
This is the first project i have worked on since the upgrade was
successful. What I am finding is that I get the following transport
error when I look at the STMS logs from BID to BIQ.
Transport Error
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
No activation possible.
Here are the details when I click to get more info on the error message:
Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
the transport connection to create a consistent request.
Wierd Behavior
The big issue now is that when i go to the transport connection in RSA1
and I want to collect Transfer Rules, I see a small subset of all the
transfer rules I would expect to see. I am looking specifically for
the transfer rules: 1_CO_PA2900010_DS PCDEVC200
Similiar behavior occurs when i am looking for "3.x DataSources" in the
transport connection
I can see these rules in other areas of RSA1 such as Infosources.
Please assist with finding these transfer rules in the Transport
connection.
Other then this transport both ECC and BI system landscapes are up and running normally.
Please help
Thanks!
Nick

Bryan,
Thanks for jumping onto this thread. I am going to complete the transports and see if i have any system name conversion issues to address. I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
To answer your questions:
1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS. The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
2. To what Source system do the transfer Rules belong to that you are missing?
---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
---Bryan: The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
Thanks!
Nick
Edited by: Nick Bertz on Dec 21, 2009 3:11 PM

How do I create transfer rule in NetWeaver Admin workbench

Hi,
Just migrated from 3.1 to NetWeaver BI 7.0. I now see 'Create transformation' when I right click the info source I just created. How do I go about creating 3.1 like transfer structure and transfer rules ? I understand 'transformation' now combines update rule and transfer rule in BI 7.0. But is there an option to create the old transfer structures etc. ?
Thanks,
Neeraj

Thanks Dinesh, I will give it a shot. Currently dont have auth on rsa1old but I believe it should have same look and feel of the old rsa1. I have awarded you the points.
Cheers,
Neeraj

Cannot find transfer rules!!!

Hi,
I have to delete an InfoObject which is no longer required.
when I right click and hit delete I get an error message that the IO is being used in a Transfer Rules.
I have searched for that transfer rule but can't locate it.
Is there any way to know where this transfer rules is?
Thanks
NEWBW

I Got the following message when I looked for it in the Metadata Repository. Please help me proceed.
InfoSource ZZXXXX (Master Data) is not known
Message no. RSAR208
Diagnosis
The InfoSource is not known.
System response
The transfer rule maintenance cannot be called.
Procedure
If this concerns an InfoObject for the InfoSource, check whether an application component is assigned to the InfoObject. If not, assign an application component to the InfoObject.

Why admin user cannot create Business Rules ?

Hi All,
Why admin user can't create Business Rules. We've to create other userID and give the required roles and then we create Busines rules right ? Pls. advice

Historically, Business rules has an internal "native" admin user. When Hyperion is externalized, this internal id can conflict with the Shared Services admin user. Effectively the two admin ids start to conflict and cause issues. There are methods to resolve this issue, but I suggest as a rule not using the admin id for business rules, therefore bypassing the problem.

Error in creating RSDS using transfer rules for master data datasources

Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

Where are transfer rules created in bi

I am new to BI and does not know how to create transfer rules ...help me

Hi,
Basically the source system is connected to BW thru DataSource. The fields from this DataSource are mapped with the fields in BW thru Transfer Rules.
The flow is like this..
Source System (DataSource) --> Infosource (Transfer Structure - Transfer Rule - Communication structure) --> Update Rule --> Data Target
Now when you create InfoSource in BW, you map a DataSource to it, then in Transfer Rules you create the mapping of fields.
Hope you are getting the flow.
Regards,
Yogesh

Changing transfer method in transfer rules

I would like to change the transfer method in a TR.
It is set by default to IDoc.
I would like to set it to TRFC with PSA.
However, I can't because it is dimmed.
My aim is to find a workaround to an issue stated in SAP note 120446.
Thxs.
LauQ.

It is a Data Mart source in the same BW system.
I have created an Export DataSource from a PSA.
I cannot activate transfer rules due to a bug (note 120446).
This occurs because the transfer method is IDoc only.
I'm afraid that no solution exist for my problem.
Thxs.
LauQ

Copy transfer structure transfer rules from one client to other client

Hi
Our R3 client 100 is mapped to BW client 100.
R3 client 100 is source system in BW.
As the master data is created by users in R3 client 200 we want to get the data from client 200 to BW. We dont want to replicate each datasource and do all stuff form scratch for client 200.
Now the question is as we need to create transfer rules, transfer structure for all master data objects for client 200 in BW.
1. Going to create R3 200 client in BW.--this is possible.
2.Like create a transport connection in BW for client 200 for all master data infoobjects transfer rules transfer structure,process chain, infopackages..etc
3.Do the source system mapping for new client 200.
4.and then execute the process chain..
What are the best ways to achieve this.
creating all transfer structure and transfer rules only for those we are loading daily ..rather than all active ones.. How can I get the list of that master data that is loading daily.. and how easily can I create transfer structure..etc dependent objects in one go than manually.
Any help or thoughts are appreciated..
can anyone throw some light please....

Hi,
BW is not client dependent!!! When you sign on to BW, you have the client required. However, this field does not appear in any table (master data, ODS, cubes, whatever).
This means that a same BW server with a single client can have multiple R/3 connections (for multiple R/3 clients).
The database do not care about the client in BW. The data will be consolidated.
So, you do not need any new client in BW, just two R/3 connections for your two clients.
Regards,

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

No transfer rules for FI master data sources

Hi all
I didnt get transfer rules for some of the FI master datasources.
0GLACCEXT_T011_HIER
0NEG_POSTNG_TEXT
0ITEMSELFLG_TEXT
When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
*Infosource(transaction data) is not known.
How to resolve this isssue.
Thanks.

Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if any and install the same.
Not all the fields will be mapped with BI info objects. Only necessary ones as defined in BI content will be available for you.
If you feel the mapping is incomplete you can modify the same according to the requirement.
Hope this helps.
Regards,
Rangz

Cannot create transfer rules

Similar Messages

Maybe you are looking for