Cannot create virtual memory swap file

Hello,
I'm getting an error message when i execute the query of a workbook.
The message I receive is "Cannot create virtual memory swapfile "\EuZ""
Something to note is that my workbook opened and ran fine in the morning and started crashing in the afternoon.
I started the workbook on another user's machine
and works fine... for now.
I look in the .INI that are created when i open discoverer and found nothing.
If there is a setting to change or
someone knows about that problem, let me know.
NOTE: The version i'm running is dicoverer 9.0.2.39.01
under windows 2000 (SP3)
Thank you
Yan

This is a (sometimes) bug, at least in Discoverer 3.1 and I see it on some machines when I first install Discoverer. One or two queries may work, and then your message (with garbage characters for the "file name") from then on.
The program seems to fail to correctly set the cache sizes in the registry (or ini file or whatever it's saving stuff) from the Preferences.
What fixes it for us (every time) is:
1. Pull down the [Tools] menu.
2. Select [Options].
3. (Scroll right if needed to) select the [Cache] tab.
4. Set the [Memory Cache] and [Disk Cache] values. You can set them to the values they were going to default to anyway, just type in there and then put it back to the original value so it sees they were "modified" and saves the values when you...
5. click [OK]
Apparently the installation defaults are not reliably saved in the first place. "Changing" them in the [Options] dialog will, however, reliably set them and that always cures this problem for our users.
Regards,
Chuck Somerville
Scitex Digital Printing

Similar Messages

Cannot create virtual memory swap file - when retrieve workbook

We are running Discoverer 4i on Window NT Terminal Version. System will prompt this problem 'Cannot create virtual memory swap file' when user tries to retrieve a workbook. The workbook has complex queries.
However, we have as much as 3GB available spaces.
Please help, for those who know the solution.
Thanks.

I don't think terminal server is a supported version
of windows for Discoverer.
Christopher

Cannot create Shared Memory

Hi,
For maintenance activity we have restarted the system. When I checked in
ST06 for os collecotor is not running and "warning: cannot create shared memory". Then I have performed the following commands at OS level
saposcol u2013d
Collector > clean
Collector > quit
saposcol -k to stop the collector.
Before restarting
saposcol -d
Collector > leave (You should get a message Shared memory deleted)
Collector > quit
move the coll.put file
saposcol u2013f(Start the saposcol)
When I executed the last command. I got message saying that "Cannot create Shared Memory"
Environment:
Windows 2003 cluser environment.
4.6c
oracle 10g
Thanks and Regards
Satya

Hi Sergo,
No, but I restarted the SAP, DB and SAPOSCOL. SAPOSCOL is up and running but there is waring mmessage in log file as
02:27:11 19.04.2010   LOG: ====================================================================================
02:27:11 19.04.2010   LOG: =                           OS Collector Start
02:27:11 19.04.2010   LOG: ====================================================================================
02:27:11 19.04.2010   LOG: Starting C:\WINDOWS\SapCluster\SAPOSCOL.EXE
02:27:11 19.04.2010   LOG: Saposcol Version is [COLL 20.79 03/08/22 46D - 20.46 NT 04/08/01]
02:27:11 19.04.2010   LOG: Allocate Counter Buffer [10000 Bytes]
02:27:11 19.04.2010   LOG: Allocate Instance Buffer [10000 Bytes]
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: You can ignore :"Index of Title:[Disk Queue Length] not found" on Windows NT 4.0
02:27:11 19.04.2010   LOG: INFO: saposcol's shared memory size is 86420.
02:27:11 19.04.2010   LOG: Connected to existing shared memory !
02:27:11 19.04.2010   LOG: MaxRecords = 637 <> RecordCnt + Dta_offset = 751 + 61
02:27:16 19.04.2010 WARNING: WaitFree: could not set new shared memory status after 5 sec
02:27:16 19.04.2010 WARNING: Cannot create Shared Memory
When I trying to stop the SAPOSCOL service. I got the message saying that
" Could not stop the SAPOSCOL service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion."
and it stopped the SAPOSCOL.
Then I am able to start SAPOSCOL.
The strange thing is in my environment, there are OS 10 drives but now I can see only 3 drives c, p and q.
Regards
Satya

[SOLVED] mkfifo: cannot create fifo '': No such file or directory

Hi, I'm trying to get Bar working on bspwm but I'm getting an error whenever I try to load it.
mkfifo: cannot create fifo ‘’: No such file or directory
At first I fiddled with it a bit and it didn't work. I figured I was making some syntax errors or whatever but the example code gives me the same errors.
I've tried to read up on mkfifo but I'm a bit lost now. I hope someone can push me in the right direction. :)
Last edited by Mnk (2014-08-29 16:24:37)

I'm guessing you are running the panel script without the PANEL_FIFO environment variable set, so the script is trying to open an empty file name.
Use the profile script to set the PANEL_FIFO variable, or set it explicitly in the panel script.
If this is not the problem, please provide more information about exactly what you are doing.

All of a sudden I cannot create virtual copies nor can I import my corrected image from PS back 2 LR

All of a sudden I cannot create virtual copies nor can I import my corrected image from PS back 2 LR

Thanks Terence, I rebuilt my database....I was not aware that I could access rebuild tools by holding the command and options buttons. Like I said, I'm new to Mac. I was able to recreate my missing photo's but they aren't the same pixel quality as the originals, look kind of blurry....any thoughts on this???
iMac Core Duo 2.0 Mac OS X 10.4.6 Mac OS X (10.4.7)

InCopy CS4 (mac) cannot create or open any files

I have a user's computer which I upgraded the OS on, and afterwards I went to check to see if InCopy runs. I was running it as a client of NewsEdit and it couldn't open the files. So I ran uninstall and install, and eventually realized that even without NewsEdit I can't get it to create a New file. Here is what I have done:
Ran the uninstaller, ticking the remove preferences option.
Put all remaining InCopy files that I could find in the trash, emptied the trash.
Ran the CS5 cleanup tool which I found on the adobe support site. (It cleans up CS3 and CS4 installs, too.)
Used applejack to fsck the disk, repair permissions, clean system and user caches, clean up virtual memory.
Rebooted, logged in to an administrator account, ran the "Setup" program inside the InCopy installer. Put in the license number, set it to install everything on the list (recommended).
Launched InCopy, Clicked on File->New and hit "Continue" on the panel. Program hangs.
Force Quit InCopy.
Used Get Info on the /Applications/Adobe In Copy folder to set its permissions and the permissions of all files down the tree to read+write for everyone.
Launched InCopy, Clicked on File->New and hit "Continue" on the panel. Program hangs.
Force Quit InCopy.
If I use AdobeUpdate to Update to 6.0.6 I get exactly the same behavior.
If I update to 6.0.5 I get the same behavior.
If I try to open an existing InCopy file, it hangs the same way.
My own computer runs InCopy just fine, giving these messages to the Console:
1/21/11 3:34:24 PM    [0x0-0xaa5aa5].com.adobe.InCopy[43770]    Error in XmlRpcClient::writeRequest: write error (error 32).
1/21/11 3:34:51 PM    Adobe InCopy CS4[43770]    *** __NSAutoreleaseNoPool(): Object 0x3618180 of class NSCFArray autoreleased with no pool in place - just leaking
1/21/11 3:35:40 PM    [0x0-0xaa5aa5].com.adobe.InCopy[43770]    virtual uint32 XMLRPCIdleTask::RunTask(uint32, IdleTimer*) threw -18151471 (feeb07d1) 'Failed executing externalEditor.registerEditor'
I can watch the Console on the machine where IC hangs, it gives all of the expected Console messages, until I go to open the file, and there are no messages after that.
Anybody have any clue as to what I've broken? We have InCopy alone or InCopy as part of the whole CS4 in multiple machines, and everyone else's works just fine.

Sales Opportunity has been put in Stage number 2 directly. In other words there is only one open row in the stages tab which happens to be the 2nd stage out of 7 stages.
Also, ran SELECT * FROM OCLG WHERE OPRID='60' - this query gives no result rows.

Cannot create a SMB Application File Share in 2012R2

I am trying to create a SOFS on Windows Server 2012R2 but cannot create the application file share via Failover Cluster Manager.
I have a created a Clustered Shared Volume using JBOD and storage spaces. The volume is formatted on the JBOD disks using REFS (I understood this is supported for CSV in 2012R2). The environment is being built using Data On Storage
9220 CiB which is certified for Storage Spaces.
I open Fail Over Cluster Manager (tried both remotely and locally on file server).
Connect to the Cluster.
Expand the Cluster
Choose Roles
Right Click on "SecSofs01Cap" which is of type "Scale-Out File Server" and choose "Add File Share"
Choose SMB Share - Applications
Choose Next
Select "SecSofs01Cap" which is of type "Scale Out File Server"
Select by Volume is grayed out and I see no volumes presented. The browse button in "Type a custom path" is grayed out as well.

Hi,
It is supported to use a ReFS volume as CSV in Windows Server 2012 R2, but not ofr Scale Out file server. See:
Use Cluster Shared Volumes in a Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
CSV provide a general-purpose, clustered file system, which is layered above NTFS (or ReFS in Windows Server 2012 R2). CSV applications include:
- Clustered virtual hard disk (VHD) files for clustered Hyper-V virtual machines
- Scale-out file shares to store application data for the Scale-Out File Server clustered role. Examples of the application data for this role include Hyper-V virtual machine files and Microsoft SQL Server data. (Be aware that ReFS is not
supported for a Scale-Out File Server.)
If you have any feedback on our support, please send to [email protected]

Not able to memory dump and create a memory.dmp file in the path: %SystemRoot%\Minidump

This question is a part of my job profile. I work for an MNC chip maker. As a part of our systems testing environment, we boot into the Microsoft windows 8.1 windows OS and run some specific tests from the OS. The platform design (mother board) is an internal
design.
Issue is with the booting sequence since no much information is available when Windows 8.1 tries to boot and when we see the splash screen. Especially when we see a BSOD, there had been no leads.
I tried to enable the small memory dump option in Windows 8.1 OS which tries to write the files into the location %SystemRoot%\Minidump on a system crash while boot. Please note that Windows 8.1 has been stored as a .VHD file in the hard disk (which
is the boot-disk). The issue is, even in an event of a BSOD while booting, I am not able to see any memory dump files that had been logged in that location.
Is this issue would have been caused by the VHD file format since it is a virtualized disk ? Please let me know what all the issues could be, so that I can have some memory logs here to look into. May be analyze the Windows debugger.
Best Regards
Akhil

Hi,
The causes why Windows does not save memory dump file after a crash are listed in the link below:
http://support.microsoft.com/kb/130536
I suggest you check the space, make sure that there's enough room for the memory dump file.
And this blog can also be helpful
No kernel memory dump created on Windows 7 or Windows 8
http://blogs.technet.com/b/yongrhee/archive/2012/08/27/no-kernel-memory-dump-created-on-windows-7-or-windows-8.aspx
Yolanda Zhu
TechNet Community Support

Disable Virtual Memory/Page File/Paging File Via Group Policy

We have several machines running Windows Server 2012 and we wanted to disable the paging file using Group Policy. It took a while to find the answer but I got it working and I wanted to share with you how this is done. First of all, to do this
manually, you would need to follow these steps:
1)Right-click Computer, select Properties.
2)Click on Advanced System Properties
3)Choose the Advanced tab
4)Under Performance, click the Settings... button
5)Choose the Advanced tab
6)Under Virtual Memory, click the Change... button
7)Choose No paging file
Obviously this process is cumbersome just for one system let alone a dozen or more. To take care of this automatically using Group Policy, you will need to do the following:
1)Create a GPO, then go to the Group Policy Management Editor
2)Navigate to Computer Configuration>Preferences>Windows Settings>Registry
3)Create a new registry item using the following settings:
a: Action: Replace
b: Hive: HKEY_LOCAL_MACHINE
c: Key Path: SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
d: Value Name: PagingFiles (do not check the Default option)
e: Value type: REG_MULTI_SZ
f: Value data: 0x10000
There is no specific setting in group policy to disable the paging file, so you must instead follow these procedures to allow group policy to modify a registry key in Windows. I tested it out on a Windows 7 computer and a Server 2012 machine.
No reboot was required, just a simple gpupdate /force command in CMD. Good luck, and don't forget to test it first! Not all systems or environments are created equal.
tags: page file, paging file, virtual memory, pagefile, pagingfile, virtualmemory, pagingfiles

> disable the paging file
Not supported by Microsoft... On all SKUs.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Cannot create Virtual Directory in Windows Server 2008 R2 SP1 Environment

Dear all,
I am trying install Reporting Services 2005 on a Windows Server 2008 R2 SP1 Enterprise machine.
So far we successfully did the following steps
- Install SQL Server Reporting Services
- Configure Service Account (Domain-User)
After creating virtual Directory, we made several steps to avoid HTTP 400 Bad Request in Report Manager:
1. Disable LSA Loopback in Registry and restart server
2. Enhance Service Startup time to 60000ms and restart Server
3. Set Application Pool to ASP.NET 2.0 Classic Mode
4. Modify RSWebApplication.config and set These entries:
<ReportServerUrl>http://servername/ReportServer</ReportServerUrl>
<ReportServerVirtualDirectory></ReportServerVirtualDirectory>
After all the Reporting Services Configuration Manager still shows a red sign and we cannot continue creating the database.
How is it possible to solve this?
We appreciate any help.
Best regards,
Mark
Mark Kuschel
Blog
Xing

Hi Mark,
As per my understanding, we can refer to the following methods to troubleshooting the issue you occurred.
Install SQL Server 2005 Service Pack 3.
Deleting the newly-created virtual directory using IIS manager and then rebooting the server.
In the Report Manager Virtual Directory dialog box, create a virtual directory for Report Manager, then change the Website to Reporting.
Enable Apply default settings.
The following link is for your reference:
http://www.mathgv.com/sql2005docs/SQL2005ReportingServicesInstall.htm
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot Create Text-Only Topic File in RoboHelp 7

I've been trying to add context-sensitive text-only help to my project using ROBOHELP 7. However, when I select "Create/Import What's This? Help File" it
does not create the file when I enter the file name on the Create/Import What's This? Help File dialog box. I enter the file name and clicl Open BUT the file is not created....weird.
How can I create this file so i can create text-only help.
Thanks in advance:-)

Hi there
I posted this in response to the same question you posted on HATT.
Hi there
I decided to see if I could sort this. It seems illogical, but here is what I seem to have discovered. When you right-click the "What's This? Help Files" and choose Create/Import, one might assume that you would be able to create a new file. But this doesn't seem to be the case. So here's how I overcame it. From the dialog, right-click and choose to create a new Text file. Nothing will seem to appear (at least it didn't for me). Dismiss the dialog, then repeat the process. You should see a file named New Text Document.txt. Right-click and name it what you like. Then you will be able to point at this document via the dialog.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Cannot create Virtual Machine

Hi,
I'm very new to oracle VM, I'm testing the software in an Ultra 20 M2 and I'm using OVM 2.2.0
After installation, while creating a virtual machine, I recieved the following error message:
Check memory, mac address and networktype
Register virtual machine img
Register virtual machine geninfo
Register virtual machine networks
Register virtual machine disks
Create PVM
Failed. Result -failed:<Exception: failed:<Exception: ['virt-install', '--paravirt', '--name=10_SOLARIS10', '--ram=1024', '--vcpus=1', '--vnc', '--vnclisten=0.0.0.0', '--vncpasswd=/tmp/tmp1p6gfA', '--noautoconsole', '--location=nfs:ovmserver1:/var/ovs/mount/6FE8B12E5B884EABB80488E5350A56F6', '--keymap=fr', '--mac=00:16:3E:3C:C6:F2', '--bridge=xenbr0', '--file=/var/ovs/mount/6FE8B12E5B884EABB80488E5350A56F6/running_pool/10_SOLARIS10/System.img', '--file-size=10.0'] => mount: can't get address for ovmserver1
umount: /var/lib/xen/xennfs.Y3Fs7i: not mounted
ERROR: Unable to mount NFS location!
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVMInstall.py", line 317, in xen_install_vm_para
run_cmd(args=cmdlist)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVMInstall.py", line 197, in install_vm_para
else: raise Exception(rs)
I understand that the system cannot mount my VM directory, I have tried several things but nothing is going through.
can somebody help?
Maury

If you are new, why not use the current version, 3.0.3? I am new too, and don't know anything about version 2 so I can't help with your direct question. 3.0.3 actually has ten patches against the host and 1 for the manager. I'd suggest you get current and start over.

Cannot create iView from PAR file

I am trying to create an iView from PAR file. But when I select the option,
"Portal component - create an iView from a portal component contained in a deployed portal archive (PAR) file"
and click next, I get the following error.
Error______________________________________
Step 1: Portal Archive Selection
No templates to display. You are not assigned to any existing templates.
I have portal_configurator and developer roles assignmed to myself. Which other role do I need? I cannot get admin role.
Note: Other users with admin roles can create iViews.

Hi
What is your portal version details ?
In EP 7.0 you do not have the option -- New From PAR.
So to create IView from Par, you should select the option New --> IView and then there will be an option to select par file.
Otherwise
1.Check if your par file is deployed on server.
2. Check the portalapp.xml, if you have configured your components properly.
Cheers
Chinmaya
reward for helpful answers

Cannot create or attach CSS files in CSS Designer panel

I'm not getting any action with create or attach options in the Sources dropdown menu. Only 'Define in Page' seems to work. What am I missing??
I've created a simple HTML5 doc with a few page elements and saved it before trying to create my external CSS. I know I can code this, but wondering if this is a bug or I'm just overlooking something.
EDIT TO ADD: Choosing Format » CSS Styles » Attach Style Sheet... crashes DW.
~ DW 13.0 OS X 10.8.4

I cannot get it to work with any file (old or new). DW is up-to-date plus I've restarted and deleted preferences… no dice. Maybe a re-install is in order... Odd.

Cannot create virtual desktop station from template WMS 2012

This is a fresh install of Multipoint 2012 Prem. with all current updates including Rollup 2. I created a win7 ent. desktop template without problem. When I attempt to create a virtual desktop station I get the popup saying it is creating the station
and after about 10 seconds it says it was successful but there is no station listed.
This same machine was a part of my domain and I had successfully created stations previously but the server was never put into production. When I needed it for another application off the domain I removed the stations and took it out of the domain.
From that point I was unable to add stations. I removed the old template and created a new one. Finally I reinstalled Multipoint and started from scratch and still have the same issue. The rollup and some server updates were the only differences so I removed
the rollup but no change. Help!
Mike

You might have already checked it but just in case, did you check the server console when this happens ?
If there is any problem with the template file, it doesnt create a desktop even though it doesnt complain about this explicitly in the Portal Admin.
Cheers,
Satish

Cannot create virtual memory swap file

Similar Messages

Maybe you are looking for