Cannot create wireless network. I use the 2wire modem of att verse...

I cannot creat a wireless network connecting the time capsule to the 2wire att uverse modem....

Need a bit more info..
You cannot create a wireless network that joins another.
And you cannot extend a non-apple wireless network.
If you want to join the TC to the existing wireless network.. old down the options key when you click on options for wireless mode.. now if you are on lion you need 5.6 utility.
Once the TC joins the network it becomes a simple wireless client with everything basically off.
A much better option is to plug the TC into the 2wire with ethernet.. and bridge the TC.. it is then accessible from the 2wire wireless network or you can create a second wireless network or a reinforced one.
Bridge is under internet tab in manual setup.. connection sharing.. off bridged mode.

Similar Messages

OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

Just want to confirm that I am also having this issue, The connection is fine, and it is in fact charging (@ 100%)
Everything Rick has said is like an echo to what is happening to me.
I have tried re-installing iTunes, and restarting the Bonjour service, sadly there is no change.
earlier before i updated iTunes it recognised my iPod but said that I had to update iTunes in order for it to work.
So i updated iTunes but now it's not even showing the device anywhere.
In case this helps:
OS: Windows 8.1
iTunes version: 11.3.1.8
Device: 5th generation iPod touch 16GB with ios 7

If I buy the iPad 2 with 3g, can I use it on a wireless network without using the 3g?

If I buy the iPad 2 with 3g, can I use it on a wireless network without using the 3g?

I leave both 3G and Wireless permanently enabled. I find that whenever I am within range of one of my chosen Wireless networks it automatically uses Wi-Fi rather than 3G. When I am not my Ipad2 uses 3G.
So in essence Wi-Fi takes priority over 3G.

How do I set up time capsule to just backup multiple macs on a wireless network without using the TC in the bridge mode?

I have an AT&T modem that serves as our home wireless network. I wanted to backup up our computer data so I got a time capsule to back up our three household MACs. After purchase, I found how that I needed to put the exising modem in "bridge mode" so the Time capsule would establish the network. Four frustrating hours later talking to 3 different people at Yahoo, I got the **** thing established. It worked fine for 4 months - then a power failure forced me to repeat the process again. I had to reestablish everything and it took another 4 hours. After 6 months, another power failure forced me to go through the entire process again. Now, of course, Yahoo is charging a fee to help you establish the TC as the network if you have one of their modems - and to make things interesting, they really don't understand MACs. After 5 hours, in frustration, I gave up and asked the Yahoo folks to just put their modem back in as the network hub and I unplugged the Time Capsule. Now after 3 months of looking at an expensive Time Capsule and searching the internet for help, I figured I try the Apple help network,
I just want to backup the data on my MACS. I have a network in the house that works just fine. How do I configure the TC to work as a backup on a wireless network? It seems like it should be simple, but it isn't. Can anybody help?

I have no idea about the modem and bridge mode (I don't do networking -- hopefully Bob Timmons, Tesserax, or one of the other networking gurus will drop in and address that).
But . . . you should be able to back up to the TC as long as it's on your network and recognized by your Macs. I think being in bridge mode means it will be rather slow, but it should work. Until/unless we hear otherwise, you might want to see #Q1 in Using Time Machine with a Time Capsule.

Cannot create wireless network

I am having an issue making the myRIO create its own wireless network. It has the capacity to do so, as shown in the NI myRIO tutorial video at http://www.ni.com/academic/students/learn-rio/applications/ in the Data Dashboard and NI myRIO video @ 57 seconds. In the video, it clearly shows the option to create the wireless network, however, when i follow the video's instruction, I don't have the listed option to create the wireless network. The image attached shows my screen and the clear absence of the option.
I am new to myRIO and thus still learning, but I don't have any idea why I don't have that option. Any help would be greatly appreciated.
Thank you,
Juan
Solved!
Go to Solution.
Attachments:
my screen.JPG ‏42 KB

It was a while ago when I last udated, so I am not completely sure what I did.
I would just run the NI update service and see what it wants to update.
Then open Max and find the myRIO. Go to the "system setting tab (along the bottom) and click the button to "update firmware". Select the newest from the dialog.
LabVIEW Champion . Do more with less code and in less time .

When I am on my home wifi I can send e-mail. When I am not on my home e-mail but on a wifi network or using the 3g network I cannot send e-mail. HELP HOW TO FIX.

When I am on my home wifi I can send e-mail. When I am not on my home e-mail but on a wifi network or using the 3g network I cannot send e-mail. HELP HOW TO FIX.

I know this question is a few years old now, but I recently found myself having the exact same issues;
Using my iphone or ipad at home created no problems at all, but I couldn't send e mails when away from my home network.
I recently switched broadband supplier at home and set up a new e mail address, then my problems began!
I openly admit I'm not great with technology and, to be honest, some of the answers provided on these forums confuse me more than the questions!
But this worked for me:
I went along the lines that the fault wasn't with my idevice but possibly with the broadband provider (in my case Plusnet) so I contacted their customer support.
They referred me to the set up process shown below;
From your home screen press Settings.
From the setting menu, choose Mail, Contacts, Calendars followed by Add Account…
From the Add Account… menu choose Other.
Fill in your Full Name, Email Address, Password and Description and press Next.If you need help with these, there's more detail underneath the screenshot.
Full name: Enter your name (or the name you'd like people to see when you send them email)
Email Address: Enter the address you're setting up, this could be a Plusnet address ([email protected]) or a hosted domain address ([email protected])
Password: Enter the password for your email address (I don't know what this is)
Description: Enter a useful description of the email address you're setting up (e.g. Mum's email). You can put whatever you want here
Press Next to continue.
More settings will appear. Some will already be filled in.Enter the Incoming and Outgoing Mail Server details and press Next. If you need help with these, there's more detail underneath the screenshot.
IMAP/POP This will default to IMAP - it's up to you which one you want to use (I don't know what to choose)
Incoming Mail Server settings
Host Name: For IMAP this is imap.plus.net - for POP, this is mail.plus.net
User Name & Password: Enter the username and password for the email address you're setting up (I don't know what these are)
Outgoing Mail Server settings
Host Name: relay.plus.net
User Name & Password: These are optional, but if you want to send mail while on the move (e.g. while connected to mobile or wireless networks), we recommend filling these in.Enter the username and password for the email address you're setting up (I don't know what these are)
When you're finished, press Next.
If the box shown below appears, press Yes (you may need to do this twice).
After a minute or two, your email address will be set up and ready to use.If you chose IMAP when setting up you’ll be able to choose whether you want to use Notes (if you chose POP you’ll be taken back to the settings screen from step 2). Press Save when you’re done.
That's all you need to do. To start checking your email, go back to your home screen and press Mail.
Now I fully understand that it may be different for each broadband provider but the processes must be similar.
The key appears to be in setting up the outgoing message server settings in step 5. Where it says "optional, but if you want to send mail while on the move (e.g. while connected to mobile or wireless networks), we recommend filling these in.
http://www.plus.net/support/email/setup/ios-setup.shtml#pagetop
Where it says "we recommend" I think it should read "you must fill these in"
I went back to Settings - Mail,Contacts, Calenders - click on the offending account and click on the account shown.
Under OUTGOING MAIL SERVER click on the server, in my case relay.plus.net, and click again to show the details. make sure you enter your user name and password and after a few seconds the account will verify and show a load of ticks.
I tried this on my phone this morning while on 3G only. I sent an email to another of my addresses and immediately got the response that the message couldn't be sent as the recipient was rejected and the message had been placed in my Outbox. I followed the above steps and immediately heard the satisfying "whoosh" as my mail was sent. 10 seconds later another satisying beep as my e mail arrived at my alternate account.
Hope this helps anyone else with a similar problem.

HT201250 I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

How do I set up Time Machine to a shared drive on another Mac?

Creating a Network Straight from the Desktop (No Router)

I have created a network straight from the desktop without a router with no protection/security key. It's on channel 11 (automatic). My internet on the desktop is working and when I connect to the network wirelessly with a PC, it connects & obtains the IP address without any issues. When I open my browser on the laptop, page cannot be displayed. I'm using Windows XP on a brand new laptop. Why can't this be simple?

planetzpmq wrote:
I have created a network straight from the desktop without a router with no protection/security key. It's on channel 11 (automatic). My internet on the desktop is working and when I connect to the network wirelessly with a PC, it connects & obtains the IP address without any issues. When I open my browser on the laptop, page cannot be displayed. I'm using Windows XP on a brand new laptop. Why can't this be simple?
Your profile is a total blank. Nobody has any idea of your computer or OS or version.

Sometimes cannot find wireless networks??

i've looked around on a couple messege boards, but they didn't seem to be exactly the same problem i was having.
essentially, after waking up from sleep or hibernate, i sometimes cannot find wireless networks. the wireless switch will be on, Fn + F5 says my wireless is on, yet nothing can be found. strangely, when i try to turn off wireless, whether it's through Fn +F5, or the hardware switch, the light below the monitor remains ON. basically, i can't even turn it off. when i do click the button to try and turn off wireless, it gives me the busy cursor and eventually the whole menu disappears.
the way to fix this is by restarting.
just today, however, i suffered this same problem, even though i wasn't coming back from sleep or hibernate - it just lost connection randomly and then couldn't find any networks. attempts to turn off wireless failed.
is there a solution? is this actually the same problem that was remedied by changing a power setting?
thanks in advance.
Message Edited by supra97RX7 on 07-14-2008 11:47 PM

Yeah I'm having this problem too, with my antique T41 running XP. It used to be rock solid it seemed to change when I installed XP SP3.
I have tried reinstalling the Intel drivers but that hasn't helped. It seems when it restarts after hibernate (and occasionally at other times, as with the previous poster) it somehow doesn't lock on to the signal or it gets confused in the protocol or something. It doesn't always happen though - about one in three. Rebooting cures it...until the next time....
any assistance / ideas most welcome, thanks.
PS I'm using Windows Zero Configuration not Access Connections. That was a change some years ago that made it work better so I'm inclined to stick with that unless someone can tell me why not....

I cannot drag my cursor, which means I cannot highlight things, I cannot scroll down/up without using the little arrows on the page

Does anyone have any suggestions for this problem?
I cannot drag my cursor, which means I cannot highlight things, I cannot scroll down/up without using the little arrows on the page.
Thanks, Roy

After looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.

Can AirPort Extreme join a wireless network and share the connection to ethernet connected devices?

Can AirPort Extreme join a wireless network and share the connection to ethernet connected devices?

Yes, if the AirPort Extreme is joining a wireless network that has been created by another Apple router. In this case, it will be extending the wireless network and the Ethernet ports are enabled on the "remote" AirPort Extreme.
No, if the AirPort Extreme will be used with another router from another manfacturer.
Ironically, the less expensive AirPort Express can do what you ask about with virtually any wireless network using a special feature called ProxySTA. It won't extend the wireless with a non-Apple router, but the Ethernet port will be enabled.

PC cannot see wireless Airport Express using Ethernet on D-LINK DIR-655 Router

This seems to be a recurring issue going way back, but I have yet to see a real solution posted.
I am using my Airport Express (APX) to stream music from the computers on my network to my stereo via Airplay. I have APX set up to wirelessly join my existing wireless network, which uses a D-Link DIR-655 router hooked to a Time Warner cable modem. I can succesfully connect all of my wireless devices via Airplay, through iTunes to my APX, including two laptops and an iPhone. However, my primary desktop PC, which does not have a wireless card is linked directly via ethernet cable to my D-Link router, and it is not able to see my APX. I can, however, see the Airport Express from my PC through my Airport Utility by directly typing in the IP address. Note that the APX set-up option to allow Ethernet clients is checked. I also noticed that my laptops will stop detecting the APX if I directly connect them to my D-Link router via Ethernet and turn off their wireless cards. They will resume detecting APX when I turn their wireless connections back on. So, bottom line, I am convinced that this is not a firewall problem. Although I have tried every conceivable setting of my D-Link router and APX, I am convinced it is either a wireless to ethernet communication issue, or some obscure setting on APX.. Any help would be appreciated.
Thanks,
Wayne

I think I found the fix based on reading some Apple TV forums where several people were having the same problem. Under Advanced Network settings in the D-Link setup, I just checked "Enable Multicast Streams" and that seemed to do the trick.

You cannot create an Apple ID using a MobileMe account. If this is your email address, it is also your Apple ID

I am dumping my Android and getting an IPhone to go along with my IPad, primarily because of the ICloud and the ease of synching all my mail, contacts etc. My original Apple ID was my gmail address. I now have the @me.com address when I put IOS 5 on my iPad. I want to dump gmail and just have one email address...the @me.com address. When I set up iCloud, I used the @me.com address. When I try to change my Apple ID to the @me.com address from the gmail address, I get this message "You cannot create an Apple ID using a MobileMe account. If this is your email address, it is also your Apple ID". Any ideas?

I also have the same problem. Is there a solution?

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?
How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
Frank

Thanks for the info, this really helps.
Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Extreme and click Next
Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

Cannot Test this Web Service using the Test Page

Hello,
I'm using
- JDeveloper 11.1.1.3.0
- SOA Suite 11.1.1.3.0
- Weblogic Server 10.3.3
- Windows XP SP3 (german version)
Now I'm having a BPEL-Process (SOA) Project created in JDeveloper and deployment to the server works fine, i.e. the service can be seen in enterprise manager.
But if I want to test the service using the webservice tester it get the following error if I copy the URL for getting the WSDL file to another browser tab:
Cannot Test this Web Service using the Test Page
Endpoint Name : FabricProvider (Service Description)
You can test the Web Service using a Java client.
Failed to Load a composite for composite identified by default/ReisebuchungService!1.0*soa_6aebb5fb-7830-497b-b853-839518d112f0
Please verify that the composite has been deployed.
Can you help me with this issue? I have no idea where to start debugging or resolving the problem.
Thanks in advance

Heya
others and I face the same issue, reported here:
TP4: Cannot Test this Web Service ...
Oracle is not too responsive on the issue though.... :(
Cheers Christian.

Cannot create wireless network. I use the 2wire modem of att verse...

Similar Messages

Maybe you are looking for