Cannot crop out edge phenomenon
Hi all,
I created a 20-second animation in Motion that is destined for DVD. I have exported to MPEG-2 out of both Compressor and FCP, tried adjusting handles, crop settings and cannot figure this out.
Though not visible in the original video, 1-pixel-wide lines appear around the frame of the video when I export to mpeg-2. Is there a reason this is happening? Here's the 11MB clip:
http://www.fattyproductions.com/stella.m2v.zip
Thanks,
EA
Hallo, few months later I may have a similiar problem. I just upgraded to acrobat 9 and especially at higher zoom levels the crop tool reacts very slowly (if at all), the edge is not visible or unpredictable things like that. I found only this post concerning problems with operating this tool, therefore I ask, did you find any solution?
Similar Messages
-
How do i crop "out" a piece of image=ex: how it will look when its cut for a window. Crop a white space in image?
I think this will help if you are using version 11 or 12.
Make a selection with a selection tool of the area you want to remove.
Example: rectangular marquee tool - make a rectangle.
Use Select>Refine Edge:
Use the View section of this dialog box to see a few views.
If you need to refine the edge of the selection (smooth, feather, shift, etc.) you can do that in this dialog box.
You may want to check the box about remembering your settings in case you need to come back to them.
In the Output section, you can pick New Layer with Layer Mask and click OK.
You should see the hole in your image.
Kathy Keith
@kathleenmadeline on Instagram
(I teach Photoshop Elements classes) -
Hi All - Cannot See Adobe Edge/Animate in Adobe Application Manager?
Edit: Have just figured out that this is down to this machine's OS being Windows XP.
Hi All,
I am to get to use the release version of Adobe Edge, having had a couple of the pre-releases.
I have signed up for Creative Cloud, downloaded and ran the application manager, however I cannot see Adobe Edge/Animate anywhere.
Am I doing something wrong?
Thanks!
See pic:I think your AAM is not updated.
Download and Install the latest version of Adobe Application Manager from the below link :
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Try to install the update now and check. -
I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks
Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732
-
Since upgraded phone to 2.0, cannot send out email
I recently upgraded my iphone to 2.0 (mistake!) and now cannot send out email from my iphone. I have tried deleting all my email accounts and re-setting it up on my iphone rather than syncing with my computer but it still will not send out email. I can send out email from my computer and used the same settings for both...
Also having mixed success sending mail on the iPhone, which is disappointing because I haven't had to send a lot of messages. Out of about 6 attempts, I've had two replies completely disappear. They weren't sent, they weren't in the outbox to send later. They just disappeared. One was while on my home network, the other was while I was traveling. I am very bothered that the emails aren't saved to try and send later.
-
I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?
The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
Or contact AppleCare. They made this mess, let them fix it. -
I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.
Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John. -
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H. -
I'm a seller on eBay and very new to Mac. I just started to list an item when I got to the area of uploading pictures of an item to my listing. I cannot figure out how this is done. I downloaded pictures from my camera to iPhoto and they apear not only in my iPhoto library but in an eBay folder/album I created. When I go to upload photos I cannot find my photos in either the Library or the eBay album. I've tried using both the basic uploader and and standard uploader choices provided by eBay.
While running iPhoto you'll need to select the pictures you want to use for eBay and then select Export from the File menu. The Export Dialog box has several options and I believe the second option is File Export - that's the option you want to choose. Now you can select the picture quality, size, and export. The file selector will appear so you can indicate the folder you want the pictures to be exported into. Now you can take the next step, sending them to eBay.
-
Cisco ASA 5505 Cannot ping local traffic and local hosts cannot get out
I have, what I believe to be, a simple issue - I must be missing something.
Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209).
There is a PC (10.51.253.210) plugged into e0/1.
I know the PC is configured correctly with Windows firewall tuned off.
The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.
I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue.
Basically, the VPN is up and running but PC 10.51.253.210 cannot get out.
Any ideas? Sanitized Config is below. Thanks !
ASA Version 7.2(4)
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif Inside
security-level 100
ip address 10.51.253.209 255.255.255.248
interface Vlan2
nameif Outside
security-level 0
ip address ***** 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
shutdown
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
ftp mode passive
dns server-group DefaultDNS
domain-name *****
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
pager lines 24
mtu Outside 1500
mtu Inside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Outside
no asdm history enable
arp timeout 14400
global (Outside) 1 interface
nat (Inside) 0 access-list No_NAT
route Outside 0.0.0.0 0.0.0.0 ***** 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
http server enable
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set DPS_Set esp-3des esp-md5-hmac
crypto map DPS_Map 10 match address Outside_VPN
crypto map DPS_Map 10 set peer *****
crypto map DPS_Map 10 set transform-set *****
crypto map DPS_Map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 28800
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 Outside
ssh timeout 60
console timeout 0
management-access Inside
username test password P4ttSyrm33SV8TYp encrypted
tunnel-group ***** type ipsec-l2l
tunnel-group ***** ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
Cryptochecksum:8d0adca63eab6c6c738cc4ab432f609d
: end
1500Hi Martin,
Which way you are trying. Sending traffic via site to site is not working or traffic which you generate to outside world is not working?
But you say ASA connected interface to PC itself is not pinging that is strange. But try setting up the specific rules for the outgoing connection and check. Instead of not having any ACL.
If it is outside world the you may need to check on the NAT rules which is not correct.
If it is site to site then you may need to check few other things.
Please do rate for the helpful posts.
By
Karthik -
I purchased an audio book from itunes and cannot figure out how to get it on my nano 7. I have tried everything.
Have you double checked to make sure these Audiobooks are configured to sync to your iPod from under the iPod's Books configuration tab in iTunes? This is assuming that the audiobooks are already stored in your iTunes library and appear under the Books category.
To access this configuration tab, plug in your iPod and select it from under the Devices section in the left hand pane of iTunes to bring yourself to the iPod's Summary tab. Now locate the Books tab across the top in the main iTunes window and select it. Here you can configure what and how audiobooks are synced to the device.
If you make any changes to this tab, make sure to hit the Apply button on in the lower right hand corner. This will sync the updated changes to your device.
B-rock -
I cannot figure out how to change the photo size on my iPhone 5s. The first time I took a pic it asked if I wanted smalll, medium or large and listed the pixels. I chose small but am now finding that is too small. Can anyone help me set it to medium now? I can't find any setting for that. I'm a newby to iPhones and have no idea what I'm doing. Thanks for any help you can offer.
By "sending" do you mean sending email?
If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
To my knowledge, there is no global iOS setting for this. Some apps may have different rules, of course. -
I I cannot sign out of my comcast email in Firefox but I can do so in IE.
My husband and I each have our own email account on Comcast email. We almost always use Firefox to open it. Suddenly, I cannot sign out of my email account on Firefox. I click on sign-out, then click on sign in, but the email automatically goes to my email account. After signing out, and clicking on email, it sometimes says "oh oh, you're not signed in." But when I click on sign in, instead of giving me the sign in box it goes right to my open email account. Just can't get out of it. When I am on IE, I can still sign in and out of both Comcast accounts without a problem.
I use a laptop with Windows 7 or 7XP I believe, not sure which it is. Thanks for your help.Try to clear the cookies from that Comcast website.
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookies files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies -
I want to sign out of current apple id and into another one that I own but I no longer have access to my current email address so I cannot log out (It is with an internet provider who I have just unsubscribed with) This is on an iPhone 5S, on iOS 8.1.
That email address is still a valid Apple ID. If you do not remember the passcode, sign onto Manage your Apple ID (Apple - My Apple ID) with that email address, and then click on Reset Password. You will be asked to answer your Security Questions in order to reset the password. If you do not remember the answers to your Security Questions, contact Apple Support to reset them for you:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB -
I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and itunes store. How do I make one password that will be recognized by all these devices? My apple id is constantly not working.
Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB
Maybe you are looking for
-
Hyperlinks in PDF to open in non-browser window
Hi there, First off, this is what I want to achieve, if possible: 1. Create Word document with hyperlink linking to, predominantly, image files; 2. Save this as a PDF 3. When clicking on an image link (hyperlink), e.g. test.jpg it should
-
Re: Fatal NI connect error 12170.
I had a similiar issue today in my 11.2 RAC database alert.log. My errors were 12170 and 12535, and it is not a firewall issue. I found in my listener logs that IP referenced in the 12170 error message had connected to my listener earlier today. It
-
Managing multiple ipods with Itunes
itunes won't let me copy songs from one library linked to a nano to a Video ipod whose library is on another computer
-
Deleted prefs etc. Just quits. Plus icons in stacks take a while to show up. A lot of programs (3rd party) have issues. I lost a few serial numbers. But Terminal I need badly . . .
-
Aperture: from trial to full
Hi all i got a free trial version of Aperture and now would like to migrate to a full version via Mac AppStore. What should be my list of actions? Delete trial or leave it and install over it? How should i manage a library in a trial in case i want t