Cannot deactivate delta load of materials from R/3

Hi,
we have a problem deactivating the delta load of materials from R/3.
I deactivated the adapter objects MATERIAL and PRODUCT_MAT in R3AC1.
I even deleted the class MATERIAL in R3AC4.
The Bdoc's are not created any more, but the queues are still getting generated in SMQ2:
R3AD_MATERIA***
Am i wrong in assuming that this settings have to prevent queue creation?
Is this an error that anyone encountered or are there any other settings that I forgot to check?
Thank you,
Borut

Hi,
I have a similar problem. I have to deactivate delta flow of materials from ONE SITE only (F6A) and keep it flowing from other sites N6A and A6A - our CRM system is connected to multiple backends.
For the required site, i have removed all the conditions in the filter settings but still delta queue keeps on coming. Also, the queue is in SYSFAIL state - we are not able to download material from other sites - supposedly material from the other two sites gets queued up in this stuck queue.
Is there any way to stop the download from one particular site only?

Similar Messages

Delta load of customer from R/3 (ECC5.0) to CRM5.0

We have done an initial load of customers from ECC to CRM (R3AS). A change is done on a customer in ECC. I expect the changes to be reflected in CRM as a delta load. I do not see the changes. What am I missing?
All responses are appreciated and will be rewarded.

Hi Mani,
Here are some clues on how to proceed with processing of incomplete or failed BP deltas:
First of all you have to note that during the initial download, no delta download can occur. In particular, no delta download of customers occurs if the initial download of materials occurs at the same time. This is because the material download depends on the customer download.
During the delta download, the CRM system uses the inbound queues R3AD_CUSTOME<nnnnnnnnnn> where <nnnnnnnnnn> corresponds to the customer number in the R/3 system. If an error occurs during the download, the inbound queue for this customer is stopped. You can see the error messages in the flow trace. For the delta download, you have the option to use Transaction CRMM_BUPA_MAP for the error analysis. If you enter the customer and press Enter here, you can display the business partner number for a customer and all open BDocs (that is, those which contain errors or are being processed). To do this, you only have to click the 'Queues and BDocs during download' pushbutton. The system issues an overview of the queue and the open BDocs for this customer and in particular, you can 'look into' the BDoc. As a result, you return to the flow trace and you can display the error messages which occured as described above. During the delta download, you have the option to send the same BDoc again. This is useful if you can simply solve the problem by correcting Customizing in the CRM system. To do this, you simply click the corresponding icon in the flow trace (currently, this is the second icon from the left).
If you have to correct the error in the R/3 system, you have to delete the existing BDoc since it cannot be processed further. As a result, the inbound queue in the CRM system is released again. In this case, you are recommended to delete all existing open BDocs and to make the changes in the R/3 system.
If inconsistencies occur between the R/3 system and the CRM system, you can start a request for the customer. To do this, click the 'Get customer from the R/3 system' pushbutton. This starts a request which uses the inbound queue R3AR_CUSTOMER. Process possible errors as during an initial download.
If you still have problems and don't know how to fix, please post more specific information from the BDoc queue, such as what error message you are getting. It helps us better identify the problem.
Regards,
Rahul
PS. Please award points if it helps!
PPS. For future reference: this info was found in note 362621: Error drng data exchange customer<->business partner

Delta load to cubes from Datamart

Hi Gurus:
We load data from ODS (Datamart) to cubes. I did the INIT & few Delta lods were also done.
I found a bug in the update rule & that has been fixed. I want to DELETE whatever small data in the cube and then do a FULL load from ODS to cube. Can I do this & will that impact delta setup...
Please suggest. I will be happy to assign the points.
Thanks.

Hi,
Yes you Can.
Delete the Requests loaded from the ODS.
Delete the Datamart Status in the ODS.
Just load the Data from ODS to CUbe with Option Init with Data Transfer.
If you have a huge amt of Data first go for Full and then Init without Data Transfer.
Thanks,
-VIjay

How to deactivate the load objects runnnig from CRM to CDM in TCode:R3AM1?

Hello Friends,
We are using CRM 4.0 , at the time of implementation they had done settings for Mobile sales also.But since implementation we are not using Mobile sales, using only CRM sales.
My concern is , in TCode : R3AM1 (Monitor Objects) , many of the objects are in status "Done" with source site " CRM " and Destination as "CDM". And these load objects are running on regular basis .I want to exclude or delete these load objects to run with destination as "CDM" and want only Source site as "OLTP" and destination as "CRM" and vice versa.
Also how can i find which background job is using what load objects?
Would appreciate for your valuable suggessions to achieve this.
Cheers
Sreedhar

Hello Soumya,
Thanks for the info.
My question is how to delete or remove or deactivate the destination as CDB(Mobile sales) in the R3AM1 T Code.Most of the standard Load objects are running in the background (as Background Job) and source site as "CRM" and Destination as "CDB" . Since we are not using Mobile sales , unnecessarily these load objects are running regularly and showing green "Done" status . How to find which job is running all these objects so that i can stop rnning this job?
Let me know for any additional info.
Cheers
Sreedhar
We are using CRM 4.0 , at the time of implementation they had done settings for Mobile sales also.But since implementation we are not using Mobile sales, using only CRM sales.
My concern is , in TCode : R3AM1 (Monitor Objects) , many of the objects are in status "Done" with source site " CRM " and Destination as "CD". And these load objects are running on regular basis .I want to exclude or delete these load objects to run with destination as "CDM" and want only Source site as "OLTP" and destination as "CRM" and vice versa.
Also how can i find which background job is using what load objects?
Would appreciate for your valuable suggessions to achieve this.

Delta load issue in COPA

Hi All
We are using COPA datasources and daily delta loads will goingon from source system R/3 without any issues.
last day the delta load from source system was failed due to some basis problem( non availability of WP) and we deleted that bad request in the DSO and then repeated the failed IP in the process chain,then the delta load was succesful but 0 records has been updated.
So we are missing that delta records,I guess this is due to the time stamp set in the source system.
In which table does this timestamp exists and what is the procedure inorder to solve this issue
How do I need to solve this type of issues.
Please let us know .,
Regards
Shankar

Hi Shankar........
I think u hav'nt make the QM status red.......when a delta load will fail............always make the the QM status red before repeating the load...........it will set back the QM status.........and when u will try to repeat the load.....system will ask for a repeat delta...........and a repeat delta will pick all the failed records along with the new records(if any).......
I think u should do reinit............ie.......
1)Delete the init flag
2) Fill the set up table with selection.........did u know which values r missed........any selection criteria..like date.......
3) Then do Full repair
4) then delta....
If u don't know the selection..............then u hav to load data for a selective range.........check ur DSO.....if the Update mode is Overwritten........then no probs.........otherwise there may be duplication of records.........then u hav to do selective deleteion........
Hope this helps......
Regards,
Debjani..........

Delta Load to cube

Hi All,
I have an issue in the delta load to cube.From Nov 11 onwards the delta load is not picking any data.It shows 0 from 0 records in the monitor screen.Could anyone please help me on this.
Thanks in advance,
Drisya

hi Drisya,
actiavte the transfer rules & update rules once & then load the data.
u said that 0 from 0 records it is showing .Is it showing status yellow OR green?
2. ur loading data from ODS to cube OR directly to cube
If it is yellow force that to red
actiavte transfer structure & update rules and do loading again.
If ur loading through ODS do export generic data sorce at ODS level by right click
Thanks,
kiran

Delta load from r3 to bw ?

i have one question on the mechanism of data transfer from r3 to bi 7.0. the followings is my concerns:
scenario:
The total numer of data is 1000 rows and these rows are seperated into 10 data package , each package contains 100 rows.
Now bw is trying to recieve these 10 packages from r3 in sequence.
When 5 data packages have been transfer to bi psa. the network is broken and the tranfer is canceled at the 6th data package.
What i want to know is when the network is reconnected ,Does the transfer start from the 6th data package?
How to find out whether its a delta load or a full load if a transfer is scheduled from r3 to bw ? For both CUBE & ODS.
How to find out how many records have been transfered from r3 to bw while the transfer has ended in
the middle ? I mean how to check how many records have been successfully transfered from r3 to cube/ods .Please tell me for ods as well as cube.
Is the continuation of transfer process is same for both ODS & INFOCUBE, if it ends in the middle ?
What is the procedure for full load & Delta load in case of CUBE & ODS ? I mean how to reschedule the transfer.
And if the whole scenario is is in the support, SO I will be handling these issues on the live production server. Am I right ? So in this case my user id should have access to all the production r3 and production bw to do these change status to red and delete the request and reload the request etc., So I should be logging on to the production server and do all the manipulation, Am I right ?
Last doubt, what is repair request and so if the transfer stops in the middle we change the status to red and reload the request again , Is it called repair request ?
What is the difference between repeat delta & repair request & repair delta ? When do we choose these options, In which scenarios ?
How do we schedule a daily load job from r3 to bw without the use of process chains ? I mean daily it should fetch the records from r3 to bw from the SD datasources at 10.00 PM ,how do we do that ?
Please I am having all these doubts and I want you SAP experts to answer them please so that I can clear my doubts in production support . I really appreciate if someone explain me the scenarios here. It will be a really great help if someonce clears these doubts.

Hi......
What i want to know is when the network is reconnected ,Does the transfer start from the 6th data package?
If your connection is broken in between......inspite your load is through PSA...........you have to delete the request from the target(after making the QM status red)............then you have to reload it again............But before repeating the load check the connection is ok or not in SM59........
How to find out whether its a delta load or a full load if a transfer is scheduled from r3 to bw ? For both CUBE & ODS
This you can check in IP scheduler in the Update tab...........whether it is delta or full load.......
or you can also check in IP monitor(You can go here through RSMO..........IP monitor screen will open directly here............or you can also go through RSA1>> Find your IP >> Double click on it >> Click on the monitor icon in the top >> From the you will go to the IP monitor>> the under the Header Tab you can see whether it is a delta or Full update...........
Or you can check the datasource also..........
If it is a generic datasource go to RSO2..........and check...........If it is a standard datasource check it in RSA5...........
How to find out how many records have been transfered from r3 to bw while the transfer has ended in the middle ? I mean how to check how many records have been successfully transfered from r3 to cube/ods .Please tell me for ods as well as cube
Your load cannot be ebded in the middle.........it can failed.............if it fails then you have to delete the request from the target..........and then repeat the load.......
Is the continuation of transfer process is same for both ODS & INFOCUBE, if it ends in the middle
Yes.........
What is the procedure for full load & Delta load in case of CUBE & ODS ? I mean how to reschedule the transfer
If a full or delta load fails after extraction got completed due lock issue or SID issue.....etc..........and if you load is through PSA.............then just delete the request from the target without making the QM status red.......and reconstruct the request.........no need to repeat the whole load again........
But if you r load is not through PSA..........then make the QM status red........delete the request from the target........and repeat the load...........
And if the whole scenario is is in the support, SO I will be handling these issues on the live production server. Am I right ? So in this case my user id should have access to all the production r3 and production bw to do these change status to red and delete the request and reload the request etc., So I should be logging on to the production server and do all the manipulation, Am I right ?
Yes.......
What is repair request and so if the transfer stops in the middle we change the status to red and reload the request again , Is it called repair request or reload request?
Suppose you delta load has failed ............and you have deleted the request from the target without making the QM status red............In this case your data will be lost and your delta mechanism will get corrupted............In this situation.............
1) Delete the init flag........
2) You have to do Full repair..........(After filling the set up table)
3) Init without data transfer to set back the init flag
4) Then Delta upload.............
In case of an ODS............you cannot load Full update and delta upload parrallely..............Your ODS activation will fail...........suppose you want full upload in the ODS..............then you have to go for Full repair............
What is the difference between repeat delta & repair request & repair delta ? When do we choose these options, In which scenarios ?
I think Full repair concept is now clear............
Suppose your delta load fails...........After that you delete the request after making the QM status red............Then system will ask for a repeat delta when you will try to repeat the load...........which means it will pick the same delta records of the failed load..........
How do we schedule a daily load job from r3 to bw without the use of process chains ? I mean daily it should fetch the records from r3 to bw from the SD datasources at 10.00 PM ,how do we do that ?
This you can do via infopackage or infopackage group...........schedule it at the specific time.....
Check these links :
http://help.sap.com/saphelp_nw04/helpdata/en/20/ad673844a7114be10000009b38f842/frameset.htm
Re: Schedule Infopackage for last day of a fiscal period
Hope this helps you.........
Regards,
Debjani...........

Delta Down Load for Materials- R/3 to CRM

Hi CRM Gurus
I have set up MW to do intial load for material masters and have been able to download products after maintaining all pre-reqs (config etc)...
Now I want to turn on delta download from R/3 to CRM for materials...I have tried CRM request R3AR2, R3AR4 to set up the request and also execute the request...
In the montitor tcode, it says its complete but if I execute the SMW01, I do not see any incomming Bdocs for R/3 materials...I have checked SMQ1 and SMQ2 and do not see any entries there either..
On the same note, if I re-run the intial load, my new material numbers appear in CRM..
Please adivse on what might be wrong with delta replication...
Regards
Jai

Hi Jai,
First thing is that you do not need to do any extra settings for the delta load, the momenet you initiate the initial load R/3 maintains the event in table TBE31 for that perticular object and delta automatecally gets activated. So to get the new material in CRM you need not run the request load rather it should come automatically. If not the you should have some stuck queue in CRM inbound with the queue name R3AD*. Also you should get the corresponding BDocs in SMW01.
If this is not the case then explain exactly what is happening in your system. Do you have any filter for the object MATERIAL?
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

HT1750 I purchased a new iMac, I have an old iPod mini I am trying to sync my iTunes library on my new Mac with my iPod. I purchsed additional music yesterday but I cannot get it to sync to load the music from my computer to my iPod.

I purchased a new iMac, I have an old iPod mini I am trying to sync my iTunes library on my new Mac with my iPod. I purchsed additional music yesterday but I cannot get it to sync to load the music from my computer to my iPod.

From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

Error in delta load of 'Customer Group' from R/3 to CRM

Hi Experts,
I added new 'Customer Groups' in R/3. But this is not being updated in CRM. Do I have to trigger initial load again through R3AS or should I create new Customer Groups in CRM?
The BP delta load BDocs are stuck in SMW01 due to this change. Also, if I need to do the Initial load of Customer Group, which object do I need to do the load for? Is it dnl_cust_sales?
Please help as it is a Production issue.
-- Pat

Hi Pat,
Use object 'DNL_CUST_SALES' to download Customer Group from R/3 to CRM.
Use R3AS4 transaction to execute the same.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Delta Load from SAP R/3 to XI

Hi Experts,
Please let me know your how can I send the following data using IDoc from R/3 to XI :
DELTA LOAD
1.New or changed WBS Elements/Networks (T Code: CJ02, perhaps others)
2.New or changed Orders (T Code: KO02 (internal), IW32 (PM))
3.Transaction Data for capital objects (Not thru XI)
4.New or changed Cost Elements (T Code: KA02, perhaps others)
5.New or changed Cost Centers (T Code: KS02, perhaps others)
Thanks,
Anirban.
Moderator message: please do some research before asking.
Edited by: Thomas Zloch on Mar 21, 2011 10:11 AM

You must see this in WE05 or BD87. Just release the idoc and have a look at we05 or bd87 and limit down the time where to search. in sm58 you can only see the idoc ith the system can not log on to the remote system. Did you check sm58 in the target system? did you check bd87 in the target system?

Issue with delta load from R/3 to BW

Hi frnds,
There is a standarded D.S 2LIS_05_ITEM in R/3. Evereday We extraceted data from R/3 to BW based on this standard Data Source with delta load.There are two fields ZX and ZY in BW ,some times the data haven't extracted for this 2 fields in BW with the delta update.But some times this 2 fields properly extracted in to BW with the same delta update.
Why is it happen like this ? Please give some inputs on this.
Regards,
Satya.

Hello,
if its a standard field then its getting populated in correct way.
if its custom field then you need to analyze the records for which its getting populated and for one which its not.
Quite possible that some cutomization in CMOD results in this behaviour.
Also,check underlying tables to see the correct values.
Regards
Ajeet

Middleware - Delta load is not working from CRM to R/3

Hi Experts,
Our client is using SAP-R/3 4.7 and CRM 5.0
Connectivity was established via Middleware and initial load of Customizing objects and Master data( Customer and Material) was finished successfully.
Now if i create any Customer or Product in R/3 they were replicating to CRM(Delta load), but this delta load is not working in CRM to R/3 direction.
In CRM Administration console( Transaction code - SMOEAC) R/3 site was maintained and subscribed for Publications - All Business Partners, All Business Transactions and All Business partner Relationships.
Can anybody help me out that why Delta load is not happening from CRM to R/3 Direction.
Thanks in advance
Nadh.

Hi Nadh,
for BPs check PIDE settings once agiain, i hope u ve already downloaded all mandatory obects for BP, because u already told that replication from r/3 to crm is ok, so check once again PIDE settings (CRM to R/3),
for Products u ve to manual upload only
for Products
This may be necessary because the data is required in the OLTP System for a number of logistical processes such as procurement, inventory management, billing, financial accounting, controlling.
cheers
Ranga

Table on delta loads from data mart

Hi,
I am loading data from two DSO's (let's call them A and B) to another DSO (B) in BI 7 with a BW3.5 delta infopackage.
Now I want to know where I can find information on the timestamp or last request from the last delta load from A and B to C.
So in fact I would like to know how the system knows which requests in A en B have not been loaded to C yet at the next delta load.
In which table can I find the information for ODS A and B that is used by the system to define what data in the change log has been loaded or not to ODS C or other targets. (In fact I should have a comparison table in BW as ROOS* in R3)
Thanks in advance!
Kind regards,
Bart

Hi Guys,
Thanks for the answers.
I know how to check everything in the Workbench, but I want to know where the information of the delta is stored technically.
Just for the sake of completeness:
Due to some issues; several successive loads from A and B were correctly loaded into DSO C (the 'new' table), but could not be activated. It is not possible to do a repeat or anything else. I am not going into too much detail, but just take this for granted.
The only way we can 'solve' the problem is to make the system believe that the 3 last loads (activated data) in A and the two last loads in B have not been loaded to C yet. Just deleting the last delta's in C and do a new delta from A and B to C will not work.
Therefore I want to 'manipulate' the table that is being read by a delta load. If I can change the timestamp or request numbers in that table, I can make the system believe that some requests have not been loaded to C yet.
Dirty, but it should work I think. But I am still figuring out what table contains information about the datamart data source (8A and 8B) and the last delta load to the targets.
Hope this is more clear.
Thanks in advance!
Kind regards,
Bart

Cannot deactivate delta load of materials from R/3

Similar Messages

Maybe you are looking for