Cannot deactivate hierarchy in Query

Dear all,
From my problem is about activate/deactivate hierarchy for query in SAP BI version 7.0 whether query running on portal or on Business Exploeror(excel).
First of all, this query is reported about cost center value and amount.
I set the user with authorized for responsibled cost center.
This user can access and run this query for responsibled cost center with hierarchy display active without error.
And i see that, this report is filter with the user authorization, that's correct.
But my problem is ...when this user deactivate the hierarchy in the query, the message " User is not authorized" will be showned. It's mean that the auto-filter doesn't work.
How can i set the authorization to user which can deactivate hierarchy and see data only responsible cost center?
Thanks for any help in advance.
Best Regards,
Lavitra P.

Thanks for your information.
I have set authorization in authorization object: S_RS_AUTH (the value of this object will be cost center) and authorization is based on hierarchy node.
Moreover, in model, character is flagged as auth-relevant. (if not set as auth-relevant, i think that the cost center will not be check as authorize)
for checking SU53, i already done and the system require S_RS_AUTH with value 0BI_ALL which is the value of root of cost center (highest node). and if i assign this, although i can deactivate hierarchy but all cost center data will be shown ( not only responsible cost center) that user can see data in other cost center so it's not correct way to solve this problem.
Do you have the way to set without auth-check fail?

Similar Messages

Activating Adobe Acrobat 8 Professional on new computer when old computer died and cannot deactivate

My computer died with acrobat professional 8 installed. When I tried to install and activate acrobat 8 professional on my new computer, it would not activate until I deactivated the software on my old computer. My old computer is completely dead and therefore I cannot deactivate the software. Please advise me.
Leo

Customer service is terrible. They don't give us the tools to help ourselves, so we are FORCED to call their service number. Then we get transferred 3 times, then disconnected - just to have to repeat the process again. Adobe recorded phone messages advises "due to high call volume, estimated wait time is 12 minutes". An HOUR AND A HALF later while still waiting on hold, I get disconnected.
I've tried the customer portal. They CLOSED my case without resloving anything or even commenting!
Where is Adobe's accountability? They don't mind charging high prices for their products, and they certainly wouldn't accept me telling them they'll have to call my 800# and wait on hold in order to get their payment. But once we purchase their products we are a prisoner of this process. There is no web interface to deactivate products. Hard drive crashes do not permit the manual deactivation on our end.
Adobe needs to either answer their phone without disconnecting me, answer their case number number without closing it for no reason, or give us - the customer - the tools to deactivate our own products. If activation can be done over the internet upon installation - then deactivation can't be much more difficult.
I honestly can't imagine how it can be legal to sell a product then cripple an owner from using it.

My computer with a licensed copy of CS4 died. I want to install it on my new computer. I cannot deactivate CS4 on my old computer, because it no longer runs, and I no longer have it.

I want to install my licensed copy of CS4 (from the CD--Windows version) onto a new computer that I recently purchased. My OLD computer died in July. I cannot deactivate the CS4 software on that computer. It has now been gutted (because a local tech guy was trying to fix it, but he couldn't) and I no longer even have the computer. So I would like to transfer that license to my new computer.
I have been able to "install" the software from the CD, but it doesn't completely "work". It looked like everything was OK initially but it won't recognize certain keystrokes, etc. and is not functional, which I figure is the software's way of saying "too many installs on this license."
So now what do I do...is there any way I can get "permission" to install this so it will work?

I doubt the license is affecting the performance - it might be a case of the software being too old for the machine.
In any case, you can contact Adobe support thru chat and have them reset your activation count to eliminatre your doubts regarding the license.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

SSRS countrow Aggregate error(Aggregate and lookup functions cannot be used in query parameter expressions.)

Below expression works fine with text box but gives error in dataset expression.
="SET FMTONLY OFF select "+ join(Parameters!Column.Value,",") +" FROM pamcustom.dbo.vw_HFL_HFD_HotfileData INNER JOIN pamcustom.dbo.HFL_HFB_HotFileBatch on BatchID = HFB_intBatchID where BatchID ="+Parameters!BatchId.Value+"
and "+Parameters!cmbTranType.Value+" "+ iif(CountRows("DS_Aml_Mnr_Iss_Desc")=Parameters!Mnr_Iss_Desc.count," "," and aml_mnr_iss_desc in "+"('" & join(Parameters!Mnr_Iss_Desc.Value,"','")
& "')")+iif(CountRows("ds_ReportingCategory")=Parameters!ReportingCategory.count," "," and ReportingCategory in "+"('" & join(Parameters!ReportingCategory.Value,"','") & "')")+iif(CountRows("ds_NAICSubGroup")=Parameters!NAICSubGroup.count,"
"," and naicsubgroup in "+"('" & join(Parameters!NAICSubGroup.Value,"','") & "')")+iif(CountRows("ds_PortTrading")=Parameters!PortTrading.count," "," and porttrading in "+"('"
& join(Parameters!PortTrading.Value,"','") & "')")+iif(CountRows("ds_GL_LE")=Parameters!GL_LE.count," "," and gl_le in "+"('" & join(Parameters!GL_LE.Value,"','") &
"')")+iif(CountRows("ds_coagroup")=Parameters!cmbCoaGrp.count," "," and coagroup in "+"('" & join(Parameters!cmbCoaGrp.Value,"','") & "')")+iif(CountRows("Portfolio")=Parameters!cmbPort.count,"
"," and portfolio in "+"('" & join(Parameters!cmbPort.Value,"','") & "')")+IIf(IsNothing(Parameters!txtSecID.Value)," "," and secid in ('"+Replace(Parameters!txtSecID.Value,",","','")+"')")+iif(IsNothing(Parameters!minPortFilter.Value)
and IsNothing(Parameters!MinPort.Value)," "," and portfolio "+Parameters!minPortFilter.Value+Parameters!MinPort.Value)+iif(IsNothing(Parameters!maxPortFilter.Value) and IsNothing(Parameters!MaxPort.Value)," ","
and portfolio "+Parameters!maxPortFilter.Value+Parameters!MaxPort.Value)+iif(IsNothing(Parameters!minCoaFilter.Value) and IsNothing(Parameters!txtMinCoa.Value)," "," and portfolio "+Parameters!minCoaFilter.Value+Parameters!txtMinCoa.Value)+iif(IsNothing(Parameters!maxCoaFilter.Value)
and IsNothing(Parameters!txtMaxCoa.Value)," "," and portfolio "+Parameters!maxCoaFilter.Value+Parameters!txtMaxCoa.Value)
I guess the error " Aggregate and lookup functions cannot be used in query parameter expressions." is because I am using CountRow to ensure that if all values of multi select all selected i will not use that filter in where clause.
Pls. guide...

Hi, Include your parameter total count in the dataset for parameter and instead of using countrows() function use the count from dataset in the expression.
Hope this helps.........
Ione

Please god . deactivate this product. Your troubleshooters dont work, cannot deactivate. I am using RETAIL, adobe acrobat xi.Connected to internet. On for over 20 min. Open to deactivate greyed out. Windows 7 x64 pro. This crap makes people want to use fr

Please god . deactivate this product. Your troubleshooters dont work, cannot deactivate. I am using RETAIL, adobe acrobat xi.Connected to internet. On for over 20 min. Open to deactivate greyed out. Windows 7 x64 pro. This crap makes people want to use fraud. I just want it OFF do i can USE it on another COMPUTER.
can anyone in customer support deactivate this??

Hi Terry,
I have checked the serial number and found that you have sufficient activation count left to install it on 2 computers.
Please uninstall the software and activate it on the other machine. In case of issues please let me know and I will help you.
Here is my direct email: [email protected]
Chat Support email:
http://helpx.adobe.com/x-productkb/global/service1.html
Regards,
Rave

Creating a Hierarchy Viewer query

Hello,
I'm having huge difficulties creating a Hierarchy Viewer Query. I've looked through the source code contained withing the demo, but it seems to require great knowledge regarding the component. I'm using a three-node model, each node grouped within it's parent.
So I created a custom View to be used as a result list for the query and this part is working just fine. I can pick the unique ID for the node I want from the search results when the user selects one, but I don't know how I can make that specific node my "anchor", my "current node", after that.
Since I'm looking for a specific "contact_id" selected from the search results, I think the correct way of doing it is finding it's node on the TreeModel, and then setting it as my current anchor.
Please, any tips, directions or suggestions on how can I go about doing this?
Thanks!!

Hi!
Thanks for the attention, but I've been through all the basic stuff. The HV documentation only teaches the most primitive part of it. I searched all blogs related to HV, all articles I could find, I've meddled with the demo source code and all I can think of, but I couldn't find anyone who would give much insight on the mechanics of the component or how to build a really powerful search engine for it.
As a sugestion for the developer team, it would be great if the query for this component allowed us to specify actions to be performed on all levels of the tree, instead of only the root node, since most of the time people use HV as a multi-root tree.

Cannot deactivat element 9, hd defect

cannot deactivat element 9, hd defect and replaced on the same computer

Are you getting an error message when you try to reinstall? If not, I might wait till you have a problem, but if you want to get it straightened out now:
http://forums.adobe.com/thread/1030438?tstart=0
follow the link in the thread for activation support during regular business hours.
EDIT Just saw your other thread. You will need to follow the link to contact activation support. If you go to the linked page when they're open, sometimes a chat window will open for you.

Cannot connect to BW query and MDX error

i have few issue encountered on webi connected to SAP BI 7 and BW 3.x
SAPBI7
1)while select the cube/multiprovider on universe connection, i cannot see all the query availbale at BW, only show some query. but i can see all cube/multiprovider. whey?
2)i hit database error when generate webi report from BI7.0 the error msg is "A database error occured the database text is : The MDX Querry SELECT {.....". it working fine when connect to BW 3.x.
SAPBW 3.x
1) i cannot see query from univese connection when connect BW 3.x, only can see cube/multiprovider. i using java connect
SAP Java Connector 2.1.8 , SAP edge 3.1
Please help .. thanks

Hi,
1)while select the cube/multiprovider on universe connection, i cannot see all the query availbale at BW, only show some query. but i can see all cube/multiprovider. whey?
>> BW queries need to be released for external access in the Query Designer
2)i hit database error when generate webi report from BI7.0 the error msg is "A database error occured the database text is : The MDX Querry SELECT {.....". it working fine when connect to BW 3.x.
>>> Does the actual query that you were using work in transaction RSRT.
SAPBW 3.x
1) i cannot see query from univese connection when connect BW 3.x, only can see cube/multiprovider. i using java connect
SAP Java Connector 2.1.8 , SAP edge 3.1
>>> see above on item #1.
Ingo

How to contact Adobe support to reset the key since my old computer is dead and cannot deactivate the key before installation

I cannot deactivate the key on a dead machine, how can I check with the support team (on key resetting)?

Oh I chatted and when she found out it was CS 5 this is what she said.......
Supriya Bhat: But the product for which you need help is no longer supported on chat
Supriya Bhat: so i will have to please guide you to forums.adobe.com
kevin starr: Unless the forums can help me with a SN# trouble it will be a waist of time
Supriya Bhat: Forums can help you with the issue
Supriya Bhat: surely
So it is a circle they send me here you send me there. I did find this.......
I cannot access my previous computer
Don't have access to your previous computer? Did you upgrade your computer's hardware, replace a hard drive, upgrade your operating system, or format your computer before deactivating your software? Ask Adobe Support to help you deactivate from a machine you cannot access.
Have your serial number or Adobe ID ready, and then contact us.
Now the "Contact us" part is the tricky thing. I am going on 5 hours trying.
HELP!

Cannot deactivate "Sleep and charge" option

I cannot deactivate the "Sleep and charge" option. I do not need it and it perturbs the functioning of my scanner. Apparently one should have two types of USB ports: ones with the "lightening" sign (used for the "Sleep..." options) and normal ones. I have on the left of my Satellite laptop two black ports and on the right two blue ports.
I cannot find the "lightening" sign anywhere and the Sleep ..." icon appears every time I plug in the scanner; this happens for all 4 ports. I have entered the "Sleep..." Set up menu and try to deactivate this option but it does not work. I have tried to uninstall the "Sleep..." option, but it does not appear on the list of programs one can uninstall.
One should be able to eliminate completely options that one does not need, but I cannot manage it.
Dan

Hi Dan
Sleep and charge option can be disabled in BIOS settings. Have you tried to do this already?

Can't install, because I cannot deactivate previous downloads

I am trying to register a re-installation of Illustrator on a new computer, but cannot do so because Illustrator was downloaded to other computers. However, I cannot deactivate on those computers, because they were damaged beyond function.

RioDuck,
Here is a place to start:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

Cannot locate policy manager query/update service

Hi,
I installed soa_server 11.1.1.4.0 on windows server 2003 machine, I got a weird issue while accessing the weblogic policy manager through em. I logged into em console, weblogic domain, domain, webservvice, policy throw this erro below
"*Cannot locate policy manager query/update service. Policy manager service look up did not find a valid service, due to: Unable to connect to WS Policy Manager. <- oracle.wsm.policymanager.PolicyManagerException: WSM-02118 : The query service cannot be created. <- javax.naming.NameNotFoundException: While trying to lookup 'QueryService#oracle.wsm.policymanager.ejb.IStringQueryServiceRemote' didn't find subcontext 'QueryService#oracle'. Resolved ''; remaining name 'QueryService#oracle/wsm/policymanager/ejb/IStringQueryServiceRemote'*"
even my wls-m is running , I can access the http://host/wls-pm.
Last three days I have spend for this issue but no clue.I disabled SSL, enable with SSL host validation false but also get this error.Please sort out this issue.
Thanks
Govindan

Problem solved.
Soln:
Given ip address in the Listen Address field of weblogic Admin and SOA server. :)
Thanks
Govindan P

I recently upgraded and changed from o2 to EE, however although my number has transferred i cannot deactivate my imessage to receive to my transferred number and cannot get messages. To original number? How do i do this.

I recently upgraded and changed from o2 to EE, however although my number has transferred i cannot deactivate my imessage to receive to my transferred number and cannot get messages. To original number? How do i do this.

That's because apps are DRM protected & tied to the account used to originally obtain them. They cannot be transferred to another iTunes account. You can contact iTunes support, explain the situation, and request they add these apps to the download queue of your new account:
http://www.apple.com/support/itunes/contact.html

Time-dependent hierarchy in query selection screen

Hello all
I am running query where input selection has following fields -
Fiscal year variable ( e.g. i can enter 2008)
Period variable ( e.g. i can enter 12)
Hierarchy Node variable
The hierarchy is time-dependent. I want that if I enter year and period as 2008 , 12 then
my hierachy node selction pop-up should show me only that hierarchy structure which was valid in 12.2008.
But my hierarchy selection always shows me hierachy structure that is valid on current date.
Can anyone help me on how to achieve this?
I have already coded keydate variable based on fisc year and period. But then how to make use of this key date variable so as to get correct selection of hier?
Regards,
Sanjyot

Hi Marcio
RSRHIERARCHYVIRT is for maintaining time-characteristics hierarchy.
My hierarchy is based on Consolidation Groups and Units.
But the hier is time-dependent.
So I want that when selection pop-up opens for a hier node , it should show me correct hier depending on year and period i have enetered.
Regards,
Sanjyot

Using Hierarchy in Query Designer

Dear all
When I use hierarchy of InfoObject 0WBS_ELEMT, there is a hierarchy which has structure following:
WBS 1
WBS 1.1
WBS 1.2
In every WBS, I focus on 3 infos (start date, finish date and duration)
WBS 1.1 has startdate: 2/8/2010, finish date: 10/8/2010, duration: 7
WBS 1.2 has start date: 5/8/2010, finish date: 17/8/2010, duration: 9
As my understanding, WBS 1 is parent of WBS 1.1 and WBS 1.2, so start date of WBS 1 is 2/8/2010 and its finish date is 17/8/2010 and duration is 12 (only included working day).
In Infocube, I received correct duration of WBS 1, but in Query Desinger, duration of WBS 1 = duration of WBS1.1 + duration WBS 1.2, This is incorrect.
Please help me way config for duration of WBS correctly in Query Designer.
Thanks
DaoBX

Hi,
An Heirarchy is always an addition of the below nodes. hence. WBS 1 = WBS 1.1 + WBS 1.2. since youre looking at durations. it will add up 7+9 instead of looking at earliest start and latest end dates.
dont know if itll work but a suggestion would be to get the start date and end date for WBS 1 and then do the calculation for duration in a formula in query designer.
regards,
Dilanke

Cannot deactivate hierarchy in Query

Similar Messages

Maybe you are looking for