Cannot define error bars for individual bars, has to be whole series

I am trying to make a simple graph that plots the mean and a standard deviation. (see picture in the link) I want to assign an individual mean values for each bar (i am able to do this), and an individual standard deviation for each bar (I cannot do this).
If I set one bar's standard deviation (custom), it also assigns the SAME standard deviation value for every bar in that series (all the green bars get the same SD value, not just the first one). I have 4 bars that I want different standard deviations assigned to (2 greens and 2 yellow = 4 different means, 4 different SDs). The standard deviations are listed in the lower table.
I can't do this. This is a fatal flaw in the software, and again, forces me to use a different application. Please tell me I'm doing something wrong! I love Numbers!
Photo:
http://web.me.com/toddknutson/errorbars2.png
Please help if you can! Thanks!
Todd

I solved my own problem!!
If you want to set different error bar values for every bar in your graph:
-choose custom error bars (positive and negative)
-then delete the placeholder value that apple provides (usually 10)
-highlight MULTIPLE values in a table (these are the values you wish to have as error bars)
-bingo!
See picture!
http://web.me.com/toddknutson/errorbars3.png

Similar Messages

Error "Licensing for this product has stopped working" when you launch Acrobat 9

Hi,
I'm part of service desk and my company has several thousand users of Acrobat. There has been strange issues reported since upgrading from 7.0.5 to 9.1 and a lot of them are uhappy. The latest issue is users started to receive the following error,
Error "Licensing for this product has stopped working" when you launch Acrobat 9 or Adobe Creative Suite 4 products. The link http://kb2.adobe.com/cps/405/kb405970.html#ErrorCodes has solution, but i tried everything given for 147-178, and nothing works. The users are highly frustrated. Any other possibilities? one collegue claims running simple reg cleaner could solve this issue.

Wow,
I went through a "font crisis" on my MacBook about two weeks ago, and I reinstalled Snow Leopard, then restored everything from Time Machine backup. Everything but Office 2008 and CS4 was able to run from the restore, because there were preferences for both that wouldn't copy back to my Library (permissions).
I reinstalled both from the "original media" (dmg's) with my Time Machine and 2 other external HDs connected and mounted. I had no problems with either. In fact since I was re-installing from dmg's stored on my Time Machine drive, I had to have it connected to do this. Installing Office and CS4 from the dmg's took all of twenty minutes for both with no errors at all.
I'm glad you got everything taken care of, but anectdotal evidence tells me CS4 can be reinstalled with external drives connected and mounted.

Where to find "Define field selection for Individual approval view" in ECC5

Hi,
I'm trying to find where I can configure the columns for the managers approval view in the backend in ECC5.
Time sheet>Setting for all user interfaces>Approval procedure>Approve working times> Define field selection for Individual approval view, doesn't appear to exist.
Any help appreciated.
Rob

Rob,
Try this:
IMG->Integration with Other mySAP.Com Components->Business Packages/Functional Packages->Manager Self-Service (mySAP ERP)->Working Time->Approve Working Time->Define Field Selection from Individual Approval View
Alternatively use SM34 and go to view cluster VC_PT_FIELD_SELECTION and enter the screen area as CTS.
Hope this helps. Good luck.
Regards,
Raj.

Concurrent Manager cannot find error description for CONC-System Node

Hi friends,
I m facing a problem while doing clustering for oracle EBS.i m using hpux11i with veritas cluster server for oracle DataBase cluster.i am doing 2 node cluster.i have installed oracle 11i apps with 9i DB.thru veritas i am able to do a db cluster failover.now i want to run oracle apps 11i too from both nodes(active/passive).so i configured a virtual IP address with a Virtual Hostname which will move along with the cluster failover.when i configure ora apps tier thru giving it virtual hostname concurrent manager dies with error--Concurrent Manager cannot find error description for CONC-System Node. i tried many things but unable to come up with a solution. pls help.
regs
Satish

Please post the contents of your hosts file here.
Is FND_NODES table populated correctly? Please run AutoConfig and make sure it completes successfully.
Why are the Concurrent Managers Failing with 'CONC-System Node Name not Registered" Error After Applying Patch 6461517? [ID 1108452.1]
OPP and SFM Managers do not Start [ID 1425409.1]
Thanks,
Hussein

Why do assets shift to the left when I delete something? For example if I have a whole series of te

Why do assets shift to the left when I delete something? For example if I have a whole series of text inserts in my movie and I delete one... assets to the left of the deleted text will shift. And the snap is NOT checked. It would be helpful if assets would stay in place and not shift to the left ... groan.
And thanks for the help previously given on another issue. I can't seem to find the origional post but did want to thank Steve for his help. Most appreciated.
Bev

Hold the Shift key down while you press delete.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Error "Licensing for this product has stopped working" when starting Adobe Photoshop CS3 Extended- XP Pro AMD; 2GB RAM

I have exhausted all known options thus far.
I started the Flexnet Licensing Service and restarted the system but the message continues to come up when lanching PS CS3 extended
After restarting computer the Flexnet Licensing Service stops again and goes into Manual mode. This also happens after a few minutes without restarting.
I also downloaded the Flexnet Licensing Recovery Kit from Adobe Support but the file stops after saying "please wait for a few moments.. ?"
I changed the setting as discribed for the Flexnt folder but the message continues to come up when PS Extended CS3 is launced.
http://kb2.adobe.com/cps/401/kb401528.html
What else is there to do. Please help me as what I can do so I can continue to use Photoshop CS3 Extended.
Thank you

I downloaded the clean Script file and followed the instructions from what the Clean Script read Me file described. The first step said to deactivate. Although I was not able to deactivate because of my original message, I followed the remaining steps.
After using the Clean Script and uninstalling Photoshop CS3 Extended and re-installing it I re-booted my computer. I also deleted the CS3 Application data files.
When I installed PS CS3 Extended the installer does not ask for the serial number on all attemps. I bought a registered copy of PS CS3 Extended. Is there another way to approch this licensing error.
Thanks.

How to define error message for function based index violation?

Hi,
I am generating Forms 6i from Designer 6i. I have a function based index to enforce case insensitive name uniqueness. With check constraints I can specify constraint violation error messages that will be displayed in Forms at runtime if needed. How can I do this with function based index constraints?
Regards,
Tamas

OK, problem sorted.
You need to create a check constraint with the same name as the new index, but don't enable it.

Datamodeler 4 cannot set table classification for individual table

Hi,
using version 4.0.0.816 I am unable to set or change the classification type of a table in the tables property dialog. I have created a relational model based on a database schema, and added custom classification types. I can select and assign the classification types at model level using "set classification types" dialog but not at the table level. At table level in the properties dialog the drop down dialog at the top "Base Classification" is always grayed out. The list boxes below with the arrows initially work as intended, but if I make a selection, close the dialog and then reopen it my selection is gone. Am I doing something wrong or is this a bug?
Thanks,
Thomas

Hi Philip,
there is a small icon that looks like an infinity symbol turned 45 degrees in the top left corner of every table in the diagram which I assume is the link symbol. I created this model from an existing schema in the database. I have exported the model to a reporting schema. I have not knowingly created any other models except to make a copy with save as. How can I find out what other model my tables are linked to? Can I remove the links so that I can edit the table properties?
Thanks for your quick answers so far.
Thomas

After migrating CS3 to new Macbook Pro Retina... I get and error: "Licensing for this product has stopped working"...

Don't have old discs to reinstall nor serial number (unless I can use the serial number that appears on the product info on my previous mac).
I know that there are other forums indicating some steps to take. I've tried some of these steps but have not had much luck.
If I reinstall the programs on my old mac I am afraid that I wont be able to re-access them if I cant get either computer to work...
Thanks!

The problem is that migrating Adobe applications doesn't work.
You'll have to clean all the CS stuff off the new computer with the Adobe Cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then install with a new clean install file here:
Other downloads
However, be aware that CS3 often does not work on the latest Mac OS X versions!

Linked charts: Error bars are not updated

Linked charts work well: Changed values for bar graph and line graph y values in Numbers are reflected in Keynote and Numbers after “updating”. However, I cannot get error bars to be updated as well. They just keep the values they had when I first paste a graph into Keynote or Pages.
Is this a bug, or am I missing something?

It seems that you missed something.
In the Pages User Guide we may read:
*+Updating a Chart Copied from a Numbers Document+*
+If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.+
+To update a chart after you’ve updated its linked Numbers table:+
+• Select the chart on the page and click the Refresh button that appears.+
+Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.+
+page 220 Chapter 10 Creating Charts from Numerical Data+
Yvan KOENIG (from FRANCE lundi 12 janvier 2009 16:18:08)

Error bars?

Please tell me that you can add error bars to the 2D graphs...

I am not sure but I don't think so... I only have the trial version but I can't find any mention of error bars anywhere.
It is actually somewhat of a feat(!) to release spreadsheet software without that very basic functionality. Numbers can calculate StDev but not show it in a graph! Apple seems determined to make sure their so called "Work"-software is useless to the scientific community. The lack of error bars has bothered me in Keynote for years. It would be dead easy to implement and is actually the only thing that prevents Keynote from being used at thousands of seminars at universities around the world - every day. I thouht this would be resolved with the release of Numbers but I was probably wrong.
Hope I am wrong and that error bars are somewhere in a menu I have not found!!

Fresh Install Mac - Licensing for this product has stopped working Error: 6

We just got the new macbook pro refreshes at work and decided to make the switch to standalone CFBuilder.   We downloaded the trial and installed. On launch we get this error, "Licensing for this product has stopped working Error: 6". Every macbook had the same result.   All are running 2 Ghz Quad Core i7 with 8GB of ram.   All of them get the same error.    All have a fresh install of 10.6.6.   Other than installing Air before the CFBuilder install they have no other applications installed.   Other than Air, there are no other Adobe products installed. All CFBuilders were installed under an admin account.
We've tried all the troubleshooting.   Permissions, LicenseRecovery, Setting the clock back to 2010... we even tried reinstalling OSX, then installing acrobat, then air, then CFBuilder with the same result every time.   We even activated the root account on the system and installed under root. Same result every time.    The Flexnet service never gets created unless we use the License recovery tool.   If we install the updater it still makes no difference.
All options for CFBuilder are grayed out under help.   Registration, Deactivation, Updates...
Any suggestions?

Thanks for posting and letting me know. Yes, it is crappy to have to work-around it like that. I noticed when I installed
Builder that it over-wrote some newer files, but I said "Okay to All". I'm using CS4 not CS5 and my newer files were probably better. I'm glad you got your program working at least. My problem is I started my first Project at the wwwroot level, like all the instructions say. It wasn't until I saw Ben Forta's video of it that I realized I was supposed to start a new folder within the wwwroot folder as my Project folder. Now I can't get rid of my first Project folder without DELETING all of the files in wwwroot, WHICH I CANNOT DO. MANY OF THE FOLDERS THERE ARE WORKING WEB SITES! If you know of any way to detach that original Project, I'd sure like to know how to do it.
Thanks,
Tedra

Account for bank transfer has not been defined

Hi,
I am doing a Bank Transfer in my SDK development and I get following error:
"Account for bank transfer has not been defined "
I use _SYS00000000002 (Cash at Bank - Checking (HO, USA, GA )) from the US demo database for testing and it doesn't work.
My code is below, even when this only for consuling.
Thank you,
Rune
oPayments = (SAPbobsCOM.Payments)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oIncomingPayments);
                    oPayments.CardCode = vmp_CardCode_string;
                    oPayments.DocDate = DateTime.Now;
                    oPayments.JournalRemarks = "Incoming - Payment Bank Transfer";
                    oPayments.TaxDate = DateTime.Now;
                    SAPbobsCOM.Recordset oRecordset_BankAccount = null;
                    oRecordset_BankAccount = ((SAPbobsCOM.Recordset)(oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)));
                    oRecordset_BankAccount.DoQuery("SELECT * FROM [dbo].[@PAY_TYPE] WHERE [U_PayMethod] = '01'");
                    oRecordset_BankAccount.MoveFirst();
                    if (oRecordset_BankAccount.EoF == true) // No Records
                    else
                        vmp_BankAccount_string = Convert.ToString(oRecordset_BankAccount.Fields.Item("U_BankAccount").Value);
                    oPayments.TransferAccount = vmp_BankAccount_string;// "_SYS00000000343"; //"1010140-001";
                    oPayments.TransferDate = DateTime.Now;
                    oPayments.TransferReference = vmp_CardCode_string;
                    oPayments.TransferSum = vmp_Amount_double;
                    vc_Message_Result_Int32 = oPayments.Add();
Edited by: Rune Brattas on Jun 18, 2009 5:18 PM

Hi,
I request you to post this thread in SDK forum,so that you may get quick response.
And kindly close this thread after posting in the appropriate forum.

"Licensing for this product has stopped working" error

Hi and thanks for your help. I've installed Director 11, but
when i run for fist time i get this error : "Licensing for this
product has stopped working"; I've already uninstall it and install
it again, but it keep saying me the same error. I've already try
the Adobe CS3 solution for this problem and the flexnet but
nothing... How can i get Director 11 working?
I have winVista HOmePremium, and cs3 master collection
working fully.

Reinstall the software properly.
Mylenium

Indesign "Licensing for this product has stopped working." Error: 5

I have CS4 design premium and my Indesign is giving me an error "Licensing for this product has stopped working." Error: 5 whenever I try to launch it. All the other programs work... I've gone through the multitude of steps found here. I have also reinstalled the whole Creative suite. I'm running Mavericks 10.9.5 on a Macbook Pro late 2009.
Tim

In place upgrades are nothing short of a crapshoot and given the unsupported nature of CS4 you’re pretty much on your own here.
That said, you could try to uninstall, run the cleaner and reinstall but beyond that, all I can suggest is a clean install of the operating system and even that won’t put you in a supported position.

Cannot define error bars for individual bars, has to be whole series

Similar Messages

Maybe you are looking for