Cannot delete mails in public folders using OWA after applying SP3 RU5

Hello,
we recently applied service pack 3 rollup 5 to our Exchange 2010 server (before it was running rollup 4).
Ever since, when we try to delete a mail in a public folder using OWA we get the message "An unexpected error occurred and your request couldn't be handled". Each attempt also causes error 108 in the application log (Outlook Web App couldn't
connect Exchange Web Services due to a configuration error. Response code = "500".) which is not accompanied by any other errors.
Neither uninstalling the rollup nor restoring the server's system state to a point before installation of RU4 could fix the error. Deleting mails in a mailbox still works fine, it's only within public folders and only in OWA.
Any ideas?

Hi,
Please refer to the following article:
http://support.microsoft.com/kb/2249852/en-us
The issue occurs when the Internet Information Services (IIS) website that hosts the Exchange Web Services (EWS) virtual directory contains a site binding that binds to an IPv6 address.
Note It is a known issue that this configuration may cause an exception .
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

  • Cannot delete mails or rename folders in icloud mail

    Hi evereyone,
    I lately realized a strange behaviour of my iCloud mail account.
    No matter where I try to rename or delete a folder (icloud.com, iPhone, iPod touch,2 iPads) I get an error message that it is not possible to do so.
    If I try to delete a mail (yes, I chose the server's Trash folder in every device's advanced settings) it remains in the inbox,
    but also shows up in th trash. So if I delete the same mail 5 times it's still there but there are also 5 copies in the trash.
    My mail client of choice is "eM Client" because it can handle icloud mail, contacts and calendar.
    Strange enough, I can delete mails in the client. So the IMAP inboxes of the client and my iDevices are not in sync.
    But I also cannot delete or rename folders in the client.
    No problems with my wife's own iCloud account.
    I am using Windows 7 and Firefox. Same problem on Safari.
    Does anyone have an idea how to solve this problem?
    Thanks in advance,
    Bodo

    Thanks mate! Who could have known this function was hidden in a tiny symbol on the other side of the screen... quite bad design by Apple and not self explanatory at all!

  • Firefox gets critical error NS_ERROR_ILLEGAL_VALUE using OWA after installing SP3 UR7

    After installing SP3 UR7 Firefox shows an Exchange Error Message.
    This occurs if using OWA by Firefox and opening the AutoReply or MailSettings Item.
    It does not alway happen on the first run, but after clicking a second or third time to through the Items its always reproduceable.
    OWA > ECP > E-Mail Organisation > Autoreply or Settings > Mail  (should be sth. like this because its a German Version)
    NS_ERROR_ILLEGAL_VALUE:
    Client Information
    User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:32.0) Gecko/20100101 Firefox/32.0
    CPU Class: undefined
    Platform: Win32
    System Language: undefined
    User Language: de-DE
    CookieEnabled: true
    Exception Details
    Date: Wed Oct 01 2014 17:20:40 GMT+0200
    Message: NS_ERROR_ILLEGAL_VALUE:
    Url: https://192.168.xxx.xxx/ecp/14.3.210.2/Scripts/editorstandalone.js
    Line: 1
    Call Stack
    ErrorHandling.showUnhandledException@https://192.168.xxx.xxx/ecp/14.3.210.2/Scripts/common.js:253:1202
    Function.createDelegate/<@https://192.168.xxx.xxx/ecp/14.3.210.2/Scripts/microsoftajax.js:5:298
    Detailed Call Stack

    Does FF have a debugging console that you can invoke when the error appears? Actually, it looks like it does:
    https://developer.mozilla.org/en-US/docs/Tools/Web_Console
    See if you can use it to find the exact function call that causes the error, and the parameter values.
    OWA For SmartPhone

  • I cannot delete mail folders from any of my accounts

    I Have just updated my iPad to iOS 8 and now I cannot delete any of the folders that are in my mail boxes. Every time I hit the delete button in edit mode the iPad just bounces back to ipad home page.

    Swiping works to delete e-mails in a folder but does not delete an e-mail folder. I have tried the edit folders then clicking on delete and again it just flashes back to the iPads home page. It worked before I did the update to iOS 8 so must be a programming glitch.

  • Exchange 2013 SP1: Public Folders in OWA

    Hello!
    Tell me please should I be able to use Public Folders in OWA 2013 SP1? I can see them on People tab of OWA, I can send mail to them, but I don't see them on Mail tab (in the folder tree):
    Thank you in advance,
    Michael

    Hello,
    In Exchange 2013 OWA, we can only see public folders on Directory by default. If you add public folder under Favorites, please follow the Martina's suggestion.
    Besides, you can't create or delete public folders.
    If you have any feedback on our support, please click
    here
    Cara Chen
    TechNet Community Support

  • No mail flow Public folders

    Hi. I'm migrate to Exchange 2013. I moved mailbox, moved public folders ( 20 folders in one pf-mailbox). I can see structure public folders, but when i send mail to public folders, i see error: this recepient not found
    Формирующий сервер: EXCHANGE2013.polikomm.local
    Remote Server returned '550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found'
    Can you help me

    Hi,
    Please use the Get-PublicFolderStatistics command to check result.
    Please disable this affected public folder and re-enable it to check result.
    Please create a new public folder and mail-enable it, then send message to this new folder to check result.
    And please check if this issue persists in OWA.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Belinda Ma
    TechNet Community Support

  • Mail-enabled Public Folders not accepting email from external users after migrating from Exchange 2003

    We are in the process of trying to decommission our Exchange 2003 server, all of the replicas have been moved to the Exchange 2010 SP3 servers. However, each time we dismount the public folder store on the 2003 server (just to see what won't work) nobody
    from outside the company can send mail to the mail-enabled public folders (we use these to communicate with vendors and customers).....they sit in the 2003 mail queue until I remount the store.
    I have mail disabled them on the 2010 PF server, waited a few hours and then mail enabled them again. Same issue. Interesting to note is that when the PF store on the 2003 server is dismounted people inside
    the company can still send to the mail-enabled PFs (which is good). I am stumped.
    HDL

    Hi,
    There is similar issue in the below post.
    https://social.technet.microsoft.com/Forums/exchange/en-US/20dc0f53-41c2-4275-a391-fd9b0907a7e1/after-move-all-replicas-to-exchange-2010-mail-enable-public-folder-stops-receiving-external-emails?forum=exchangesvrdeploylegacy

  • SPAM and Exchange 2010 Mail-enabled Public Folders

    Is there a way to determine if mail sent to our Exchange 2010 mail-enabled Public Folders by our customers is ever rejected because it was tagged as spam? The concern is that we might not be receiving some email. We rely on the mail-enabled PF's
    heavily, but since they aren't a mailbox there is no Junk E-mail folder to check. We do not have the resources to check EOP on a regular basis throughout the day, and the customer would not get an NDR or anything like that.
    HDL

    Hi,
    You can consider to use Message Tracking tool under EMC -> Toolbox to track these messages.
    Understanding Message Tracking
    https://technet.microsoft.com/en-us/library/bb124375%28v=exchg.141%29.aspx?f=255&MSPPError=-2147217396
    Search Message Tracking Logs
    https://technet.microsoft.com/en-us/library/bb124926(v=exchg.141).aspx
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • Collect name, Identity, parentpath and PrimarySmtpAddress of all mail enabled public folders.

    Hi,
    I’m trying to collect the name, Identity, parentpath and PrimarySmtpAddress of all mail enabled public folders. PrimarySmtpAddress returns empty whatever I do. If I use this same cmd-line then it works fine.
    What am I doing wrong? Here is the powershell code I'm using:
    Get-PublicFolder \ -Recurse  -resultsize unlimited  | ? {$_.MailEnabled -eq $true} | Select-Object Name,Identity,parentPath, `
    @{label='PrimarySmtpAddress';expression={"$((Get-MailPublicFolder '$_.Identity').PrimarySmtpAddress)"}}
     Thanks in advance!
    win_builder

    The ps code next is getting the info i want to collect:
    Credit goes to travis5150 and Chris Dent from expert exchange
    cls
    $publFolders = get-publicfolder -resultsize unlimited  -recurse | ? {$_.MailEnabled -eq $true}
    @(foreach ($publFldr in $publFolders){
    $objProp = "" | Select Name,Alias,Identity,ParentPath,PrimarySmtpAddress
    $objProp.name = $publFldr.name
    $objProp.Identity = ($publFldr.Identity)
    $objProp.parentpath = $publFldr.parentpath
    $objProp.Alias = (get-mailpublicfolder -id $publFldr.identity | select -exp Alias)
    $objProp.PrimarySmtpAddress = (get-mailpublicfolder -id $publFldr.identity | select -exp PrimarySmtpAddress)
    $objProp
    Thanks for your help and time!!
    win_builder

  • Mail-enabled Public Folders Not showing as Mail-enabled

    We have completely migrated from Exchange 2003 to Exchange 2007 (SP1 Rollup 5).  Many, but not necessarily all, of our mail-enabled public folders do not appear to be mail enabled in either the 2007 PF Management Console or the Shell, yet they are mail-enabled in the 2003 System Manager and we can send email to them.  If we mail-enable a folder in the EMC, it blows away any previous email addresses and creates a new one.
    Any reccomendations on how to get 2007 to accurately display the properties of these folders??

    Issue description: Mail-enabled public folders can’t show as mail-enabled status in the EMC and EMS after migrated from exchange 2003 to exchange 2007, right?
    Troubleshooting:
    1.       Please use “Get-PublicFolder” to check the output of a migrated problematic public folder, see if the value of “MailEnabled” is “True”
    Get-PublicFolder -Identity "\problematic public folders name"
    2.       Please find out where migrated problematic public folder objects exist in the AD. By default, mail-enabled public folders should stay in the “Microsoft Exchange System Objects” container. You can use ADUC or ADSIEditor to verify their current location
    3.       I assume that link between mail-enabled public folder and its AD object has been broken during the migration. So, I suggest you to create a test mail-enabled public folder, and compare the attributes of its AD objects with the problematic one with ADSIEditor. This will tell us if there are any incorrect values in the attributes of the problematic public folder objects
    a.       Launch the ADSIEditor (Start->run-> ADSIEditor.msc)
    b.      Locate problematic mail-enabled public folder object and the new created one
    c.       Right-click the objects and select “Properties”. Then, compare their attributes in the “Attribute Editor” tab
    Notes: Please select all three checkboxes in the “Attribute Editor” tab, it will save more time during the comparison

  • Cannot Delete CPTL file from Desktop using Vista

    Hi All,
    I cannot Delete CPTL file from Desktop using Vista. Explorer
    crashes. It is a Captivate 2 file.
    I have tried (with no luck):
    - logging in as a different user and deleting the file.
    - running explorer as an Administrator
    - uninstalling Captivate.
    Anyone got any ideas?
    Cheers,
    Raef

    Hi Raef,
    That is a strange issue. Here are a couple more ideas you
    could try:
    - Have you tried renaming the file (including suffix)?
    - Have you rebooted?
    - Do you get any error messages when trying to delete, such
    as "Acess Denied"?
    - Is your machine networked? Is it possible someone else has
    the file open?
    - Can the file be moved to another location or put in a
    folder (and then deleted)?
    - Have you tried using the Command Prompt / DOS mode to
    delete the file?
    It sounds like it could be a Vista issue so I would look at
    the Microsoft Vista forums too. Sorry I do not have an exact
    answer.
    IHTH,
    Aaron

  • I cannot delete mail from my inbox and get a message saying (msg) could not be moved to the mailbox trash-POP account".

    I suddenly cannot delete mail from my inbox and get a message saying " (msg) could not be moved to the mailbox trash-POP account".  It does not matter if I am trying to delete a single message or mulitiple messages.  Can anyone help?

    If you're running Leopard, as your profile says, then you need to post your question in that forum, not the Snow Leopard forums. So if you're really running Snow Leopard, you need to update your profile to show that, as well as give more details about what kind of mail accounts you have, and who your email provider is.

  • Acrobat X, error message "cannot delete pages, pages are in use"

    Recently updated to Acrobat X. After saving a pdf, if I try to delete a page or pages, I get an error message "cannot delete pages, pages are in use". I have to close acrobat and reopen my document to continue deleting pages. Is there a fix for this? So far, I think Acrobat 7 was better that X!!!!!!!!!!!!!!!!!!

    What OS are you using?  Ive read that preview pane in windows vista and 7 causes an issue with the delete page feature.  The suggestion was generally to turn the preview feature off.
    Heres technet article on turning off the feature:
    http://social.technet.microsoft.com/Forums/en/itprovistadesktopui/thread/d2a9c302-1ef1-4d9 8-9e81-a88603ae8405

  • Mail-enabled Public Folders not showing as enabled in PFMC or EMS

    Good morning
    I have some PF's that are mail enabled, but running the Get-PublicFolder cmdlet shows "mailenabled" attribute as False. Also, in the PF Management Console, the folder shows as not mail enabled (with an option to enable it).
    I found this thread that seems to be related:
    http://social.technet.microsoft.com/Forums/exchange/en-US/918aad03-c96f-4023-89cc-ec2c66e51b93/mailenabled-public-folders-not-showing-as-mailenabled?forum=exchangesvrgenerallegacy
    I'd like to do some testing, but recreating this issue with a test PF is actually really hard.
    Does anyone know a way to force that "mailenabled" attribute to False after mail-enabling a PF? I can't find any ADSI attribute that is obvious. I changed MsExchRecipientTypeDetails to <not set> but that didn't do it...
    **UPDATE** I just found out that msExchMailboxGuid is missing from that object. Does anyone have any kind of suggestion for how I can find the Guid of the mailbox that is no longer associated with this PF?
    **UPDATE 2** I have found other PF's that are missing this attribute, but they are not displaying any symptoms. They are showing as mail enabled in the EMS and PFMC. So I guess this isn't a required attribute.
    Could anyone explain the purpose of this attribute for mail-enabled public folders? I just assumed it was required.
    Thanks!

    Hi,
    Do you migrate these mail-enabled public folders from previous Exchange server to Exchange 2010?
    Please check if you can see the SMTP address for mail-enabled public folders via Properties of Public folders.
    Please check if they show in the Microsoft Exchange System Objects in ADUC.
    Besides, I recommend you mail disable the public folder and then mail enable it again to check the result in the Public Folder Management Console.
    For a mail-enabled recipient, a minimum set of attributes is required to make all Exchange components work properly. For example, a mail-enabled entry (a user, contact, group, or public folder) has to have at least these attributes: mailNickname, legacyExchangeDN,
    and displayName. Without the mailNickname attribute, an object is not considered mail-enabled.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Cannot get mail. Account in use on another device

    AAll at once I receive the error message " cannot get mail. Account in use on another device" do you know how this can be as I have turned off all other devices that could have the account open.

    Jack-
    Just to be sure, change the password to your E-Mail account.  After a few days you can change it back if the problem doesn't go away.
    Fred

Maybe you are looking for

  • Changing the file extension in Oracle Spool

    Hi All, I need to spool some specific data for the entire year. I'm using date parameter for selecting the month wise data. In single parameter I'm retrieving file_name,From_date and to_date. But by default spool file is getting generated with .lst e

  • Bex Query Calculate Result as Ranked

    Hi i have a Bex Query that i am using to design crystal report.... Data output of query is Country...$....Rank US.......100...2 UK........200...1 CA........50....3 Rank is copy of "$" and used option "Calculate Result as " Ranked list in Property of

  • Adobe Reader 7.1 crashes on Mac OSX  with Read Out Loud

    I installed a Cepstral voice as the default on my Mac OSX 10.3.9. When I try to use the Adobe Reader "Read Out Loud" function, Adobe Reader 7.1 crashes. It didn't do this before installing the new voice. How can I fix this? THanks, Pam

  • Translation Pattern Usage Report

    I am trying to determine if a translation pattern is still needed.  Is there a report that can be run?  Call Manager Release 6.1.  Thank you.       

  • IMac not waking up

    Hello everyone. For some reason my 27" late 2012 iMac is not waking up properly. This seems to be since upgrading to Yosemite 10.10.1 - it never happened on vanilla 10.10. What happens is this: I'll come back to my Mac for the first time in the day h