Cannot delete MAPI client?

I run a MacMini with Snow Leopard server. I have stopped the Mail service but I can't delete the MAPI clients on my dekstop. Upon deleting a client a new one gets installed in a second automatically. Sometimes more than 5 clients get simultaneously installed... VERY annoying. Does someone know the solution to this?

Try unbinding and then delete.
K.

Similar Messages

Windows 8.1 client cannot delete shared server files.

We have one office that has a Windows 8.1 client on the network that cannot delete files in a shared folder on their server.
The folder is a catch all folder for the copier to scan to and contains all the PDF files it creates. When the one user tries to delete any of the PDF files they get an error saying the file is in use. We have tested by deleting files from
the server and also from other workstations.
We have rebooted the computer and also tried to resolve it by specifically giving the user full rights to the folder, but the problem remains persistent.

Hi,
There are several possible reasons for your situation, you might don’t have a permission of this folder, the folder is in use, a corrupted file is in current folder.
http://windows.microsoft.com/en-hk/windows/cant-delete-file-folder#1TC=windows-7 (Also applies for Windows 8.1)
First, I suggest to log on the computer with an administrator account to delete the folder and disconnect the network connection if possible, second, Run your computer in safe mode to delete the folder or files, to run computer in safe mode:
Restart your computer, meanwhile press F8 until you see the safe mode screen.
Hit enter at safe mode, log on the system as an administrator.
Find the folder or file you want delete.
Regards
Wade Liu
TechNet Community Support

Cannot Delete Client Variables

Summary: I have a logout page that deletes session and client
variables. When I execute the page, the CF debugging information
notes that all the session and client vars have been deleted.
However, when I execute another page in the same application and on
the same browser, that page's debugging info notes that the client
var stll exists. How is the server showing that the client var
doesn't exist one page, but exists on another? (I am using CF MX
Version: 6,1,0,63958)
*****Here's the code I use to delete the client and session
vars

<cfapplication
name="SteadyApp"
sessionmanagement="yes"
sessiontimeout="#createTimeSpan(0,0,0,0)#">

<cfset DelteVar = DeleteClientVariable("userID")>
*****Here's the code from my application.cfm page:
<cfapplication
name = "SteadyApplication"
clientmanagement = "Yes"
clientstorage="SteadyDatabase"
setdomaincookies="Yes"
sessionmanagement="Yes">
Thank you in advance.
/AJ

I continuely have this same problem, so if someone has any
insight on whats up with this... please.
let me ask you this though... where is your setting of your
variable located? is it in the appplication.cfm page?
if it is this might be the problem. even though you are
deleting the var in your delete page, the application page is
present and will persist the var because ... it knows...

After Update, cannot delete files from nss volumes

Not sure if this is the same problem caused by the SLES11 upgrade, but after running all the upgrades on an OES11 system, I can see all the nss volumes of the upgraded servers from workstations using the Novell client, and I can copy or create files on these volumes. However, I cannot delete any files, they disappear from the workstation windows explorer when they are "deleted", but an f5 promptly shows the files are still there. I can go into the server as root, and delete the files under Linux with no problems, so this part is working OK.
I am running Novell 11.1 patch 1, and this problem has only been noticeable after the update installation.
I have supervisor rights to the volumes and files, and if I additionally set all the other file rights, I am still unable to delete the files.
Anyone got any ideas?
Cheers.
ChasR

Originally Posted by chas
Not sure if this is the same problem caused by the SLES11 upgrade, but after running all the upgrades on an OES11 system, I can see all the nss volumes of the upgraded servers from workstations using the Novell client, and I can copy or create files on these volumes. However, I cannot delete any files, they disappear from the workstation windows explorer when they are "deleted", but an f5 promptly shows the files are still there. I can go into the server as root, and delete the files under Linux with no problems, so this part is working OK.
I am running Novell 11.1 patch 1, and this problem has only been noticeable after the update installation.
I have supervisor rights to the volumes and files, and if I additionally set all the other file rights, I am still unable to delete the files.
Anyone got any ideas?
Cheers.
ChasR
I had a similar problem at updating with SP3 on SP4. It was similar, that permission ERASE is not applied to all trustees working through ncp in spite of the fact that it was available.
Has solved a problem that has redefined this permission for trustees on all catalogues.

Cannot delete user from monitor

nw 5.1 server sp2a
WS 98 client 3.40.0.0 or WS XP client 4.83 sp1
zen 3.0
I want to delete a suspicios file from a directory on the server.
After a few seconds I lost connection with server.
I login again and in MONITOR on the server there are two connection with
my user name.
When I want to clear first connection, MONITOR hangs.
I want to clear first connection from Netware Management Portal, but the
result was the same.
Thus, I cannot delete file from the server and I cannot clear connection
to the server.
Help
Doru

Doru,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Adobe bridge CS5.5 cannot delete files

Hi
I have latest version of Lion, and recently upgraded CS3 to CS5.5. All my files under my home folder are there to view in bridge and were ofcourse created under CS3.
If I select ANY file, I cannot delete it, or move it, or rename it, or do a batch rename.. Nothing, yet it I find it in my finder window, I can delete it.
If I create a new .ai file which would be with CS5.5 I CAN delete it. So I am wondering what permissions are not sufficient from CS3 to CS5.5 in bridge. I have spoken to Apple Tech and they advised me to change my home folder permissions for Everyone to read and write and apply to enclosed items. That didn't work.
I have heard there is an issue between Lion and Adobe, but not sure I buy that one. At the end of the day Bridge is just like a finder window, except it have more tools and more links to more adobe applications, but basically a file view window. Yet when I choose to view files in Finder I can delete them, except it will keep asking me to enter my user pword everytime with no option to remember it.
The only way of getting around this so far is to manually one by one is SAVE AS each file with a new file name.. no auto script option I can see of doing it so far.
I have ALOT of files, surely there is something I should be knowing after all these years.
HELP!
Dan

Thank you, SG, for clarifying which OS's this will work with.
I agree with Jennie - the beauty of "get photos from camera" is that it takes 2 steps out of the workaround you mention above. Personally, I'm okay living with 6.4.1, as I have an older camera. I won't be happy if one of the push updates re-updates me to 6.5 though. I wouldn't want to redo the reinstallation of the new version. This method will not work for any of my clients or students though - they normally can't comfortably follow the technicality of downgrading, and some have newer cameras and would need the 6.5 version. (I don't believe in betas for my clients, and neither do they, for the most part)
I guess I should thank Adobe - some of my clients have needed tech support to perform the downgrade (SO many people aren't comfortable technically), and some of my clients needed to be retaught the workaround SG mentions. Adobe's flub has actually made me a little money - which I'd rather not have to make this way.
SG's workaround does work and makes sense - but for my clients with hundreds of images at a time, who have to rename items, add copyright info, & etc., this more than doubles their work-time for the start of their workflow. I hope Adobe gets that GM version out soon.
BTW - this issue supports an argument I've hadfor years regarding "PUSH" updates. I always tell my clients and students not to do them until they research the update. Because of what I do, I do have to install them personally, but I'm grateful I'm comfortable fixing things myself.

One of the pages I am working on is blocked and I cannot delete/change items displayed there

One of the pages I am working on is blocked and I cannot delete/change items displayed there. I have unlocked all the layers but still cannot access the content on that page. Thoughts?

I'm using version 9.2.1. on a mac
I'm helping edit some maps for the company I work for. The pages are regular A3
The map part is not blocked, but the second page with the descriptions/text will not let me make any changes to it. I cannot select anything on the page including the images.
I am trying to edit the text provided and rearrange the page layout accordingly.
I thought this was a "layer" problem, but this does not seem to be the case.

Cannot create HTTP client Exception in Http -- XI -- RFC scenario

Hi,
We are testing Http --> XI --> RFC scenario
While testing this scenario from RWB we are getting following error message in the SXMB_MONI logs:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_CREATE_FAILED</SAP:Code>
<SAP:P1>1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Cannot create HTTP client (exception 1)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Following is the info from the Trace:
<Trace level="1" type="System_Error">cl_http_client exc = argument_not_found</Trace>
We have tried following things:
1. In SICF we made sure the /default_host/sap/xi/adapter_plain is active
2. Applied SAP Note: 716739
Any response will be greatly appreciated.
Thanks,
Paresh

Hi UDO,
Thanks for your reply. The error was gone when I tested again this morning. I am guessing it must be the SAP Note 716739 that we applied and might not have refreshed the cache.
I am still intereseted in confirming what exacly fixed this issue.
As per your suggestion, I looked at the left Nav bar and the error was at the "Call Adapter" step. Even in the log message it says the same. The reciever/interface determination and mapping were successfull. I could successfully test the scenario in the integration directory.
Here is what the 716739 Note said:
Symptom
If you call the Integration Server from a sending Integration Engine (proxy), the following error message occurs:
Category = XIServer
Area = INTERNAL
Id = CLIENT_CREATE_FAILED.
In transaction SXMB_ADM, you used the Configure Integration Engine function to enter a URL of the type http://<host>:<port>/sap/xi/engine?type=entry instead of a URL of the type dest://<name>.
Other terms
SICF, SXMB_MONI, SXMB_ADM, XI
Reason and Prerequisites
You have configured the communication route from the sending proxy (Integration Engine) to the Integration Server using the URL of the type
http://<host>:<port>/sap/xi/engine?type=entry and have saved the logon data on the Integration Server in the Service
/sap/xi/engine (transaction SICF).
A program error has occurred: the communication log is not correctly set when the HTTP client is set up.
Solution
The problem is eliminated with SAP_BASIS Support Package 2. To eliminate the problem, you can use an URL of the type dest://<name>, where <name> refers to the name of a HTTP destination that you have maintained with transaction SM59.
Now, I was not using the proxies but Http post to XI. Do you guys also think this might have fixed my issue?
Thanks,
Paresh

Irregular characters show up as '?' in filenames, cannot delete

Okay, this is a REALLY perplexing problem. I've done hours upon hours of Googling and forum searching to no avail, and I've even tried changing my locale, and various forms of character escaping. Nothing seems to help!
I have some files with characters in their names that are outside of the en_US.UTF-8/ISO-8859-1 set, and I have no clue which set they are actually in. bash or glibc (I don't know what's causing it) is mapping those characters to '?', which is preventing me from doing ANYTHING to them. I cannot delete, move, copy, etc., because an escaped '?' is being used to refer to the files' names whenever I try deleting them, and for each such file this does not properly represent the actual file name.
Here are some examples:
$ ls
ls: cannot access 03 Suen?o Con Mexico.mp3: No such file or directory
03 Suen?o Con Mexico.mp3
$ cd ..
$ rm -r cdm/
rm: cannot remove `cdm/03 Suen?o Con Mexico.mp3': No such file or directory
$ rmdir cdm/
rmdir: failed to remove `cdm/': Directory not empty
Is there any way to display output in some form other than text, i.e. hex, and then use that to specify/target the files for deletion?
Also, if this helps: I'm using en_US.UTF-8, the filesystem type is JFS, and the files I'm having trouble with were copied from a FAT32 volume, and the files were originally created on that volume in Mac OS X.

jacko wrote:edit: NVM, I see you have tried it. Looks like a more sinister problem. I wonder, can you mv the file to /tmp and have it deleted on reboot?
Hey...That's a really good idea! I think I'm going to try that, although I hope that failure to delete it (if that becomes the case) doesn't prevent me from booting up!
EDIT:
OMG I TRIED IT AND IT FAILED TO BOOT UP!!!
Last edited by deconstrained (2009-01-12 18:33:29)

Cannot delete mails or rename folders in icloud mail

Hi evereyone,
I lately realized a strange behaviour of my iCloud mail account.
No matter where I try to rename or delete a folder (icloud.com, iPhone, iPod touch,2 iPads) I get an error message that it is not possible to do so.
If I try to delete a mail (yes, I chose the server's Trash folder in every device's advanced settings) it remains in the inbox,
but also shows up in th trash. So if I delete the same mail 5 times it's still there but there are also 5 copies in the trash.
My mail client of choice is "eM Client" because it can handle icloud mail, contacts and calendar.
Strange enough, I can delete mails in the client. So the IMAP inboxes of the client and my iDevices are not in sync.
But I also cannot delete or rename folders in the client.
No problems with my wife's own iCloud account.
I am using Windows 7 and Firefox. Same problem on Safari.
Does anyone have an idea how to solve this problem?
Thanks in advance,
Bodo

Thanks mate! Who could have known this function was hidden in a tiny symbol on the other side of the screen... quite bad design by Apple and not self explanatory at all!

Cannot delete SharePoint web application again

While deleting web application
Central admin gives error:
Sorry, something went wrong
An object in the SharePoint administrative framework, "SPWebApplication Name=ShareAppsUAT", could not be deleted because other objects depend on it. Update all of these dependants to point
to null or different objects and retry this operation. The dependant objects are as follows: correlation id
ULS log shows following error
Unknown SQL Exception 547 occurred. Additional error information from SQL Server is included below. The
DELETE statement conflicted with the REFERENCE constraint "FK_SiteMap_Application". The conflict occurred in database "SharePoint2013UATEnterprise_Config", table "dbo.SiteMap", column 'ApplicationId'. Table 'LastUpdate'.
Scan count 0, logical reads 2, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. The statement has been terminated.
I had similar thread https://social.technet.microsoft.com/Forums/sharepoint/en-US/74e06180-f066-47e0-8895-3e909206b9e9/cannot-delete-sharepoint-web-application?forum=sharepointgeneral
The only difference is error in central admin. Before for another web application i got
Object not set to a reference of an object. now i am getting An object in the SharePoint administrative framework, "SPWebApplication Name=ShareAppsUAT", could not be deleted because other objects depend on it. Update all of these
dependants to point to null or different objects and retry this operation. The dependant objects are as follows: in both powershell and central admin.
Solution in above thread gives following error for this case
Exception calling "Delete" with "0" argument(s): "An object in the SharePoint administrative framework, could not be deleted because other objects depend on it. Update all of these dependa nts to point to null or different objects
and retry this operation. The depend ant objects are as follows: Web Application name.
How to solve it? It is like a loop. If i go to delte web appliction it says content database is dependent object and if i do for content database it says web application is dependent object
Adit

Hi Adit,
From your description, the issue might be caused by orphan items in sitemap.
Please execute command below to check IDs and site map status for all site collections and subsites in the issue content database:
stsadm -o enumallwebs -databasename <database name>
Then use the command below to delete orphan sites:
stsadm -o deletesite -force -siteid <siteid> -databaseserver <database server name> -databasename <database name>
Now run IISReset and try delete web application via:
Remove-SPWebApplication - identity http://sitename
For related information:
http://technet.microsoft.com/en-us/library/dd789634(v=office.12).aspx
http://technet.microsoft.com/en-in/library/cc288016(v=office.12).aspx
http://technet.microsoft.com/en-us/library/ff607891(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support

Client Security Services - Cannot Register Into Client Security

Hi,
I got a problem for login on Client Security. It asks "enter Windows password" and after enter it the answer is " the user cannot register into Client Security".
Configuration: Thinkpad Z61M, Vista professionel 32 bits, CSS 8.0.
I reset the security in BIOS,
clear the CSS and finger print,
install CSS 8.2 and finger print
I got the same answer from CSS after re-enter Windows password and Composed Password.
Could you help me.
Moderator note; subject edited

Hi,
to day I come back on laptop, I follow your action plan.
I uninstall CSS
As the HKLM\Software\lenovo was not clear with CSS, I delete this entry
AS %programfile%\Lenovo was not clear with CSS, I delete the CSS directory
I reset also the security chips in Bios
I install CSS again
In fact no change:
I got after boot a windows asking my windows password
After I got a window asking to wait during registration in CSS
And finally a window saying the user can not be registered in CSS
It could be a Security chips failure but no hard error seems to raise and I have no test to check it.
Thanks for your help, I think that I stop to use this software.

Cannot delete emails in Thunderbird

I cannot delete emails from thunderbird. The client gives me an error "The current operation on 'inbox' did not succeed. The mailserver for [MYACCOUNT] responded: [TRYCREATE] The requested item could not be found." What does this mean? This is using IMAP FYI.
Thanks in advance for any help,
-Steve

I found how to fix it here:
http://wiki.sourcemage.org/HowTo%282f%29ChangeIMAPTrashFolderInThunderbird.html
Unfortunately, I cannot delete the other "Trash" folder now. How do I delete it?

Cannot delete files using dreamweaver

I just updated a site to the latest version of PHP and MySql. I find that while I can upload new files to the site, I cannot delete either existing or new files using Dreamweaver CS6.
Has anyone else had this problem?
Howard Walker

Have you tried with a different FTP client?
This sounds like a LINUX permissions/ownership issue. Upgrading PHP would not change the permissions/ownership, unless something else happened during the process, such as that the files were moved to a different location.
The way PHP runs affects permissions/ownership (DSO, CGI, suPHP, etc.), but even if that changed I don't think it would affect the permissions set on your site files.

Stupid N95 music player cannot delete album and ar...

After added new songs, then refrash, the new albums and artist can shown in the list. But How about I deleted these songs? The albums and artist still in the list that I cannot delete them. A stupid notice, 'feature not supported', is displayed when I want to delete the an albums or artist. How stupid the application design is! Is it a record to remind me what I listened before?
Also, why the background picture was separated in the now playing window? I means cannot be shown full screen as other screens. My theme is work well in V12 firmware, what problem on V20?
In fact, I am very disappoint that Nokia rob of the free GPS function in new firmware to chouse more money from customer. Now, a useless music player is pushed to user. What is next?

There a a number of posts on how to easily solve the problem regarding deleting album/artist folders.
Odd what you say about the GPS. My GPS is free. The navigation isn't but I can read a map....
If no-one died or got sued, it's an OK day

Cannot delete MAPI client?

Similar Messages

Maybe you are looking for