Cannot delete messages from the Drafts folder in Mail.

I am running Mail 2.1.3. For some reason I am no longer able to delete draft messages from my Drafts folder. It is by no means a serious problem, just annoying! Can anyone figure this out? Thanks.

Hi Dubaiman, and a warm welcome to the forums!
I'm having trouble finding exactly where that is stored, but maybe move these to the Desktop in case we want to put them back, quit Mail first...
/Users/YourUserName/Library/Mail/[email protected]/.mboxCa che.plist
/Users/YourUserName/Library/Mail/Mailboxes/.mboxCache.plist

Similar Messages

  • Cannot delete users from the Central Management Console

    I cannot delete users from the Central Management Console.  I'm logged in to Enterprise as administrator but still get the following error:
    There was an error while writing data back to the server: Sorry, you do not have the right to 'Delete objects' (id - 22) for 'koberg' (id - 725415). Please contact your system or permissions administrator if you require this right.
    Thanks in advance for any help on this matter.

    Oops, my mistake, sorry. Ok, so the Administrator cannot delete user koberg.
    Check top level:
    Logon to CMC, browse to Home > Settings and select the Rights tab. These are your top level settings. Factory default will show only Administrators and Everyone. Select the Net Access "Advanced" for the Administrators group. NB: Do not select these group names links - they will jump you out of the top level! On the Advanced rights page, ensure the right to "Delete objects" is explicitly granted.
    Then set for the Users top level folder:
    In the CMC, browse to Home, and select Users. Select the "Rights" button. Again - NB: Do not select these group names links - they will jump you out of the Users top level folder! Set the Administrators group to "Full Control". Save.
    That should be all you need. However, there is a possibility the previous admin was busy setting security not only at the account level, but on groups so we need to verify the user:
    In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the Rights tab. If the Administrators is not set to (Inherited Rights), make it so, and when you select the "Update" button, you should see the Net Access update to "Full Control". If this is the case, you should follow these steps on each account and accomplish this.
    And if you still can't delete it, verify the groups:
    In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the "Member of" tab. Note all groups koberg is a member of. Then in the CMC, browse to Home, and select Groups. Select the name hyperlink for the group(s) that koberg belongs to. On the group page, select the Rights tab, and ensure the Administrators have (Inherited Rights) - Full Control on all of these, also. If not, set it.
    Finally, I know you inherited this, but let's overview some basics of simplifying your deployment administration. Follow these guidelines, and your administration life will be so much easier.
    1. The Everyone group should never have any subgroups. Ever. All accounts on the system are a member of the Everyone group. Adding subgroups to the Everyone group is redundant.
    2. For simplicity's sake, Application level access should be set on the Adminstrators Group, and the Everyone group. I know there are customers who add groups to application rights. I don't understand why users would have an account on the system if they are not allowed access to InfoView, but it's your system.
    3. From a report object perspective, the Everyone group should be set at the top level to "No Access". This will result in them having no rights on anything at all. You break this inheritance at the application level to give them access to InfoView and other apps. On folders and objects, you ADD groups, then assign (ADD) rights as desired.
    4. If you can help it, never explicitly deny a right to any user or group for any object or application. Explicitly deny overrides any other setting. If a user belongs to group A and group B, and group A is explicitly denied a right, you can explicitly grant it for group B or the user all day long, and it will still be denied. Always try to put yourself in the position of adding groups/users, and adding rights, then inheriting as far down the folder tree as you can.

  • Aperture, why when I delete from an album it deletes it from the project folder

    Aperture, why when I delete from an album it deletes it from the project folder also.
    I thought that it was the other way round, in that the library was not the main entry.
    I have 10 project folders and 6 albums and I want to remove the albums and keep the projects "as is"
    I am unsure as to how I wound up with albums in the Aperture program.
    thanks
    Greg
    Lamont

    Never used the Trash icon either (and generally don't show the Toolbar).  But at least the Tooltip is correct:
    Now that I think on it, clicking "Trash" _should_ put the item in the Aperture Trash.  The confusion comes from the use of "Delete" -- specifically using a key with that label to execute a command that changes based on not only what kind of item is selected, but where the item is located.  So in this case (let me parenthetically add I have yet to take part in my morning caffeine ritual) "Delete" in the Tooltip does not equal "press and release the 'delete' key", but rather is used as a verb (rightly, imho).
    Not sure what a better design might be, but perhaps at least popping up a window saying, "The selected items are Images in an Album.  Would you like to remove them from the Album, or move them to the Aperture Trash (which will delete them from the Project they are in)?".
    Greg -- I suggest using the context-sensitive menu (a/k/a "right-click") to select the command you want:
    Message was edited by: Kirby Krieger - formatting and clean-up.

  • I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file

    I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file

    From the Finder menu select 'Secure Empty Trash'. If this or the suggestion above doesn't resolve the problem take a look at the various suggestions in this link:
    http://www.thexlab.com/faqs/trash.html

  • I have purchased a new iMac, with Safari 5.0.5, but it won't retain bookmarks, I thought I can download a new Safari from Apple. So I deleted Safari from the application folder.

    I have purchased a new iMac, with Safari 5.0.5, but it won't retain bookmarks, I thought I can download a new Safari from Apple. So I deleted Safari from the application folder.
    Then I tried to download Safari from Firefox but after finish download, what I got was a dmg file, with a pkg icon (an opened box) and it can't be installed. Same with Google Chrome.
    My question is: how can I download Safari? And will it retain bookmarks?

    Reinstall Safari from the Optional Installs.pkg on your Mac install disc that came with your iMac. Or in your case, you use Pacifist to extract the Safari app from the .dmg file.
    To bookmark a webpage:
    Go to the webpage you want to bookmark. If you use tabs, you can open multiple webpages in tabs to bookmark them as a collection.
    Choose Bookmarks > Add Bookmark, or Bookmarks > “Add Bookmarks for These Tabs.”
    Type a name for the bookmark or collection in the dialog that appears.
    Specify where you want to keep the bookmark or collection. You can add it to the bookmarks bar, the Bookmarks menu, or to a collection if you have created any.
    Click Add.
    To add a bookmark quickly, click the Add button in the toolbar, or drag the webpage’s icon from the address field to the bookmarks bar.
    To see your bookmarks, choose Bookmarks > Show All Bookmarks.
    In the future, rather then deleting an app, come here and ask for help first. More times then not, you will save yourself time and trouble.

  • HT1277 How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info Messages on server.

    How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info > Messages on server. What am I doing wrong?

    Mail > Preferences… > Accounts > Advanced > Remove copy from server after retrieving a message

  • Deleting messages from the sxmb_moni

    Hi frnz
    i want to delete messages from the sxmb_moni. i am trying to delete these from the sxmb_adm---->schedule delete jobs.
    here i found 1> schedule delete job for xml messages
                           2>schedule delete jobs for history entries
    i scheduled the time and executed the job. after executing the job i am getting the status finished. while seeing the  job log here its showing 0 XML messages deleted.
    so the job is running but the messages are not deleting.
    can u tell whatu2019s the procedure to follow the schedule delete jobs.
    i gone through some blogs and threads, but i found clearly how to schedule archive jobs but not how to schedule delete jobs clearly.
    pls tel me whatu2019s the mistake happening.
    Regards
    Munna

    thanks  Sekhar, Ramesh and Suresh for the relies.
    its a very good blog from u Sekhar.
    i need some clarifications how to delete the messages. first i canceled the messages by running the program RSXMB_CANCEL_MESSAGES . all the messages now are in the manually canceled status.
    now i want to archive the messages and delete the messages, right?
    i am trying to archive the messages by scheduling the archive job.here i am giving the archive  message program      RSXMB_ARCHIVE_MESSAGES,but its asking the access  key.
    what i have to give here. i dont know the access key.
    another question , i am able to see ITFACTION field in the  SXMSPMAST table. i am not able to see the messages in this field.
    how to delete the messages from the table SXMSPMAST. can i delete the field or not here?
    please reply
    Thanks Regards
    Munna

  • Phone not deleting messages from the server

    Please help! My Blackberry Curve 9360 is not deleting messages from the server meaning that, after returning home from a week working away, i've still got a few hundred messages to wade through on my PC.
    I receive e-mails on the PC via Outlook Express. I've clicked on 'tools', 'accounts' then 'advanced' to ensure that the box for 'leave a copy of the message on the server' is unchecked i.e. messages sould be being deleted from the server when prompted to by the phone but this is not happening. Not sure what else to try or perhaps there was something i did / didn't do during the set-up of the phone.
    Any guidance would be much appreciated.
    Thanks in advance,
    Barry.

    Hello,
    Please check this KB:
    KB05133 Email reconciliation features for the BlackBerry Internet Service
    All reconciliation capabilities between your BB and your email SERVER are governed by that KB. So, even if you set the other settings (e.g., "Delete On") correctly, they will be irrelevant if your email service does not support it (as per that KB).
    Further still, reconciliation between your email SERVER and your PC CLIENT software are something completely separate. Only in a very few circumstances (e.g., IMAP) does (for instance) Outlook reconcile items deleted at the Server down to the PC Client.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cannot delete messages from inbox, cannot move messages out of inbox, message do not copy to "sent" or "draft"

    The following problems occur:
    - cannot delete messages,
    - cannot move messages out of inbox,
    - messages do not copy "sent"
    - messages cannot be saved to "draft"
    This applies to imap and to gmail accounts.
    The following has not helped:
    - compact trash and other folder
    - deinstall and reinstall TB 31.4.
    - archive profile with mozbackup and replace profile from archive after reinstall of TB.
    - deinstall and reinstall TB 31.3 downgraded
    - delete all folders and files with "trash*" in the file name (all IMAP)
    - delete all files of 1 mail account completely in the TB profile and resync from server (IMAP)
    This might coincide with these system changes:
    - upgrade to TB 31.4.
    - some of these email accounts were installed on ios8 iphone.
    Not sure if the problems had already started before these 2 occurrences.
    Any help is appreciated to solve this.
    Thanks!
    fashi

    What type of mail account is this (POP, IMAP, .Mac)? If POP, what are your Preferences > Accounts > Advanced > Remove copy from server settings?
    You may be able to get rid of those messages in Mail doing Edit > Cut (⌘X) (for best results do it with one message or just a few at a time), but you should remove them from the server first if they’re still there.
    Does this account allow web access? If not, you may find the Account Info window useful to solve this problem — choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window.

  • Cannot delete message from Trash

    Hi
    I have more than 10,000 deleted messages under Trash, in a folder named "on my mac".
    When I try to empty that folder o just empy the whole Trash, Mail crashes due to the high volume.
    I would like to delete those messages from the Finder, but I cannot find there the "on my mac" folder.
    Any ideas on how to get rid of the deleted messages?
    Thank you.
    Eneko

    The messages are .emlx files, but there is an index file that will still point to them unless they are deleted in mail.
    Try opening a few of the ( you say it's 60 000 now? it was 10 000 before ) messages - I hope you'll get a message saying they can't be displayed.
    If you do, go to the mail menu Mail-Mailbox-Rebuild . this should re-work the index so it reflects the true number of messages.
    Having said that - have you tried just deleting the mailbox, rather than trying to empty it? highlight the 'on my mac' trash mailbox & choose Mail-Mailbox-Delete.
    Failing all that - I'd be tempted to move your wanted messages to various new mailboxes, ( in modest numbers per mailbox - perhaps not numbered in the 10 000's?) make a copy somewhere safe of the entire Mail folder, then force Mail to start from scratch & import your old wanted messages into mail.
    To do this - after you've created your new mailboxes & moved the messages you want to keep into them; copied the Mail folder and Quit Mail
    In Finder locate home/library/mail/ & trash that folder.
    Then locate home/library/preferences/com.apple.mail.plist & move it onto the desktop, just in case things go wrong. ( I mean Move, don't leave the original file in the Preferences folder )
    Open Mail again - you'll be asked for account details ( you wrote them down first?)
    Just in case you get asked "do you want to import..." at this stage - Don't do it.
    Then. from Mail, use Mail-File-Import Mailboxes & point it to the "mailboxes" folder inside the copy of the Mail folder you made.
    Choose only the new mailboxes that you made, & moved your wanted messages to . Import them & they should all be viewable in mail.
    Try the 'rebuild' or delete mailbox first though - & if any of the above isn't crystal clear - ask before you proceed.

  • How to delete message from the fodler of  AOL account using Java mail

    Hello All,
    I am using Java MAil API in my application, i want to delete message from AOL account's folder,
    when i set the folder as "Recently Deleted" or "Trash" , i get an exception as "folder does not exist".
    when i tested , some times mail is moving into Recently Deleted folder, but not every time.
    this is happening in both the interface as AOl Interface or my application.
    when i use folder.close(true) after setting the flag of message as DELETED. it completely remove the message from the acount.
    but i want to let the message be remained in the Recently Deleted folder. what should i do.
    i dont want to remove the message completely from the account.I am using IMAP also.

    You'll need to figure out what the real name of the "Recently Deleted" folder is on the AOL IMAP server
    (assuming it's a real folder and not some sort of "virtual" folder), then copy the message into that folder.
    See the folderlist.java demo program as a way to explore the names of all the folders on the server.

  • TS3276 how do I delete messages from my sent folder?

    I am trying to delete 1825 messages from my sent folder but to no avail.  Can anyone please advise?  If I select them and hit delete they look gone, but once I click away and then click back to the sent folder they reappear!

    Place the cursor on and click on one message in the list of messages to select it, then use shift-click to select a range of messages, or then use command-click on other messages to select specific (and isolated) messages, then ⌘ Delete.

  • Safe to delete content from the Temp folder under AppData?

    Hi everyone,
    Is it safe to delete the contents from the Temp folder (C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp) in the SharePoint 2013 web front end servers?
    For some reason I see around 30 GB of temp files. Came across
    this blog post but in my case ULS logs are still being generated in the D drive. Not sure how those Temp files are being created. Application servers seem to be fine. 
    Tried - 
    changing the ULS log path from D to C and back to D drive (as per the above blog post... no luck)
    tried restarting the SP tracing service
    Any suggestions would be appreciated!
    BlueSky2010
    Please help and appreciate others by using forum features: "Propose As Answer", "Vote As Helpful" and
    "Mark As Answer"

    Hi,
    Thanks for the sharing and have a good day.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • "Command-i" which was so useful in being able to selectively delete messages from the servers no longer works. Is their a replacement? Will it be fixed? Or should I change my mail application?

    "Command-i" which was so useful for selectively deleting messages from servers has disappeared in  Maverick. I wonder if it has been replaced by something else or should I look into other mail applications.

    Hmmm.  Which Mail program are you referring to?
    in Mac Mail command -i used to bring up the Account info pane on the server  (10.8.5)
    Now it seems you have to use the gear at the bottom in "Mail Activity" to get the drop down (10.9) :

  • For some reason, I cannot delete messages from my Inbox.  How do I correct this?

    I am unable to delete messages from my Inbox on my MAC.  What can I do to correct this?

    Patrick
    Thanks for the instructions.  I got as far as Disk Utility, then hit Verify but couldn't find Repair Disk, the Mail icon was there but couldn't click on it.
    Someone else suggested I hit the control button then delete which did work.  Perhaps it was a combination of closing out of Mail and hitting the Control button/delete that helped?  Weird............
    thanks again,

Maybe you are looking for

  • HT5622 How do I change the Apple ID for iCloud on my phone?

    I have changed my Apple ID.  It works on all aspects of my phone except iCloud where I cannot change the Apple ID.  It keeps asking for the password for my old ID and will not allow me to change the ID for iCloud in my phone.  I have logged out using

  • Fetch the index of the node in a tree

    hi, i am using a recursive tree structure, i need to get the index value of a selected node in a tree structure, can any one help me? thanks in advance, Regards, Meyyappan

  • Graphic shows in landscape, disappears in portrait

    I placed a graphic in a 3 column grid landscape layout. Through the Widget menu I applied a caption. Through the Wrap menu I applied Float and Object Causes Wrap. When I switch to Portrait mode - the graphic just isn't there. It's not anywhere - I ch

  • After the IOS 5 update, emoji icons are not displaying properly.

    Such as the some of the hearts and stars and the color of the question mark and exclamation point.

  • EKKO+ RSEG : Report times out

    Hi What would be the most effetive way to check whether an purchase order has been invoice receipt(IR) and what the invoice document number is? The report times out because i don't use the year and invoice document number when reading rseg. The link