Cannot delete more than a few music items at a time -- would like to delete all

I don't want my Music backed up onto the VZ Cloud. However, it already was backed up and used up most of my 5GB, so I tried to delete it using the web interface on cloud.verizonwireless.com.
If I go to multi-select (which is, as others have posted, incredibly slow to start up) and check the select all box, then hit the delete icon, it gives me an "are you sure?" dialog, I click OK, and it thinks for a moment and says "We are unable to access your cloud right now, try again later." However, if I only select a few items (1 to some limit less than about 25) it will delete them happily.
It is not acceptable to have to do that. It is also incredibly bad app design to funnel any internal error (which is probably what's happening here, right?) into a catch-all error message that is factually wrong.
Also, if it knows I've "used 5.0GB of 5GB" then it ought to also be able to tell me where that space is, not just list documents.
More time on design and debugging and less on putting "WANT TO UPGRADE?" on every spare bit of white space would have been worthwhile.

I don't have my phone with me at the moment to tell you the exact steps. This may help.
Try going into Settings | WiFi. Then press the Menu button and Select Advanced WiFi.
If there's an option to drop weak WiFi points, de-select it. If there is some battery saving option to turn off WiFi, deselect that as well.
Power cycle your phone.

Similar Messages

  • I installed lv 6.1 on a windows 98 system. As I am having problems of stability (much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch.

    I installed lv 6.1 on a windows 98 system. As I am having problems of stability (frequent crashes, much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch available.

    My experience with Win98 is that it is not a very stable system, regardless of software used. For example, Win2000 and XP are far more stable than 98. I've had it crash on its own if I leave the computer on for several days.
    I wouldn't recommend running programs for long time (few days) on this OS.
    This being said, can you be more specific in your question. What kind of stability problems did you have, which VIs did you run (if possible post them here), did you change the interrupts and priority levels on those VI, do you get error messages or blue screen....
    Zvezdana S.

  • Cannot add more than four or five files at a time

    This has really been bothering me for a while. When I try to add files to the library, if I select more than four or five, nothing happens. No errors are received but nothing happens! In addition, it does not even remember my last folder so I have to navigate back to try again.
    If I incrementally add four files at a time it works, but this becomes extremely annoying.
    In addition, adding the entire folder usually does not work in this scenario.
    I am using the newest version of iTunes and see it both on XP and on Vista.

    I am also having this problem and it is a real pain in the *. And it seems we are not alone, some one else suggested that you add files by selecting them in their windows folder and dragging and dropping them into your library pane on the left, especially with the "copy into itunes music folder" turned on. That works for me and it is about the same as adding them with the add file option. Cheers.

  • Cannot sync more than 4 videos to i phone at time

    i have downloaded 10 tv shows to my i tunes and the i phone will not sync more than 4 at a time

    What are your sync settings under the Video tab for TV Shows?

  • Cannot see more than one shared virtual disk at a time

    I have multiple virtual disks configured and as I add them to the specific virtual machine im using it modifies the vm.cfg as follows:
    disk = ['file:/OVS/running_pool/110_openfiler/System.img,hda,w',
    ',hdc:cdrom,r',
    'file:/OVS/sharedDisk/openfiler-ocs-u01.img,hdd,w!',
    'file:/OVS/sharedDisk/openfiler-ocs-u02.img,hde,w!',
    'file:/OVS/sharedDisk/openfiler-SAN-test.img,hdf,w!',
    when the machine boots up the contents of /dev only contains the shared drive hdd, thus I cannot see hde or hdf.
    One thing I tried was to edit the vm.cfg after adding the shared drives to the machine to mimic:
    disk = ['file:/OVS/running_pool/110_openfiler/System.img,hda,w',
    ',hdc:cdrom,r',
    'file:/OVS/sharedDisk/openfiler-ocs-u01.img,sda,w!',
    'file:/OVS/sharedDisk/openfiler-ocs-u02.img,sdb,w!',
    'file:/OVS/sharedDisk/openfiler-SAN-test.img,sdc,w!',
    This allows me to see all three drives when I issue fdisk -l
    Disk /dev/hda: 105.2 GB, 105226698752 bytes
    255 heads, 63 sectors/track, 12793 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/hda1 * 1 13 104391 83 Linux
    /dev/hda2 14 12539 100615095 83 Linux
    /dev/hda3 12540 12793 2040255 82 Linux swap / Solaris
    Disk /dev/sda: 20.9 GB, 20971520512 bytes
    255 heads, 63 sectors/track, 2549 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/sda1 1 2550 20480000 ee EFI GPT
    Disk /dev/sdb: 20.9 GB, 20972569088 bytes
    255 heads, 63 sectors/track, 2549 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/sdb1 1 2550 20481024 ee EFI GPT
    Disk /dev/sdc: 104.8 GB, 104857600512 bytes
    255 heads, 63 sectors/track, 12748 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/sdc1 1 12749 102400000 ee EFI GPT
    but then my question becomes... could this cause any potential problems?

    I found that there are 4 IDE disks and 7 SCSI disks at most for HVM guest on Oracle VM 2.1 version. For IDE disks, The available disknames are from hda to hdd; and for SCSI disks, are from sda to sdg. you may make test about it. :)
    Message was edited by:
    Changhai

  • Cannot have more than one Mobile item for a person

    Hi,
    I cannot have more than one mobile phone item for a person. In India some of them carry dual SIM card phones and both will be valid. In Lumia 800, I dont see an option to add two mobile items. I can do with a work around by choosing one mobile item with Windows Live Account and another with Google Account. But then that is not the right way to do it. If I need it both on same account, then I cannot do it.
    This feature is available in all the Android phones. Also i am facing another issue is that Lumia 800 does not sync any mobile item #2 of Google account, so I have to go to Google and manually add that phone number to my phone, which is painful.
    Hope Microsoft is listening.
    But I really like the way the facebook, SMS and all other chat are sync'ed in one place.
    Regards,
    -Srinivasan.

    The wierd thing is they have duplicates for Home/Work but not for Cell. I have the odd contact that has two cell phones. Really only two work arounds, use one of the other available types as a secondary cell number or what I do is create two contacts, one in Exchange and one on Live. Since my main account is Exchange, I put the secondary number in the Live contact, then on the phone I link the two together. This way I see two cell numbers for one contact.

  • HT6114 I cannot select more than one message at a time to delete from the trash. Any ideas will be appreciated

    I cannot select more than one message at a time to delete from the trash. I did not have this problem before I updated to Maverick. What am I doing wrong?

    This works in many different ways and in lots of apps.
    Hold down the command key and you can select from a list (leaving some not checked) to exclude them from the delete process.
    To empty all of the trash folder use command-a keys to "select all" and then the delete key to remove them.

  • I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line.  When I put a comma in, the recipient's address is deleted.  If I use ' ' with more than one recipient the save grays out.  Any thoughts?

    am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line.  When I put a comma in, the recipient's address is deleted.  If I use '< >' with more than one recipient the save grays out.  Any thoughts?

    I figured it out.  I needed to fix some errors in my account information.  It works fine now.

  • I cannot open more than 1 Tab per window. The "+" does not work as well as the item "New Tab" from the File drop-down menu. What shall I do ?

    I have just removed FireFox and reinstalled it again on my Mac Book PRO.
    When I open FIreFox I canNOT open more than 1 TAB.
    I click on the "+"on the top line of the window. It should open another TAB but id does NOT.
    I click on the File item in the top menu bar. A drop-down menu pops up. I click on "New Tab" and nothing happens.
    How can I get more than 1 Tab on the same window ?
    This feature works with Safari !
    Thank you so much.
    Best regards

    We have seen reports about a Community Toolbar extension causing this issue with not being able to open a new tab.
    So if you have such a toolbar then start with disabling it.
    *Tools > Add-ons > Extensions
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Music wont play more than a few seconds on some songs

    Some of my songs wont play more than a few seconds and some only 30 seconds when i play in WMP they play fine
    Purchased at amazon.com
    i have tried deleting and re adding file plays in windows media player fully

    problem solved Re downloaded fresh files

  • Playing music through nano and auto stereo, while traveling...nano is set to shuffle, but if vehicle is stopped for more than a few minutes, nano restarts with same song everytime! How do I make it really shuffle the songs

    Having trouble with Nano shuffle while traveling.  It's connected to my vehicle stereo and set to shuffle. When I stop the vehicle for more than a few minutes, the music resumes with the same song it always starts with. How can I get it to keep shuffling after restarting the vehicle?

    Is the iPod actually doing the music playing?  If the iPod is connected using a USB port (on the car audio system) and docking cable, the car audio system is doing music playing.  The iPod is just acting as a storage device (like a USB flash drive) with song files.  So, in that setup, it does not matter whether the iPod is set to shuffle or not, because the car audio system is playing the songs.  Any change to how it plays songs would have to be a setting on the car audio system.

  • CANNOT COPY MORE THAN 11 SONGS TO AN 8GB MICROPH

    I'm in need of help. I had all my music on my microphoto and one day it started to rebuild it's library and it never recovered. So I did the recovery and formatted, cleaned and even updated my firmware. I rolled back to media player 0 and everything, but I cannot copy more than songs to my player.
    I am in need of help. I can verify the space on my microphoto and it's in excess of 7gb.......please help. Thanks.

    What you can do is to show hidden files in the control panel
    . Open COntrol Panel
    2. I f you are in category view, click? "Performance and Maintenance"
    3. On the top left corner, Click "File Types"? (If you are in classic view, there is an icon for it)
    4. Go to the "View Tab" and select the option "Show hidden files and folders"?
    Then plug your ZEN Microphoto to your computer,? Open my computer, locate your Microphoto and try to see if there is any files that are filling up your player. Play around the folders and stuff and If you do find some stuff, delete it from your player.

  • Itunes cannot authorise more than 5 computers

    Within iTunes, I cannot get my work PC's iTunes to log into iTunes Match.  It says I cannot authorise more than 5 devices.  I have deleted devices, so that all that remains is a couple of iPads and a Macbook.  It is still saying this message.  It is very frustrating.
    Please help me.

    These steps may help you :
    Begin by opening the iTunes program and going to the iTunes Store via the iTunes Store button in the top right.
    Once you're at the iTunes Store, click on the Sign In button at the top left corner (if you're not signed in) or on your account name in the same location (if you're already signed in).
    This will bring you to your iTunes account. In the top box, you'll see a section labelled Computer Authorizations towards the bottom. Next to it is a button that reads Deauthorize All. Click it.
    A window will pop up asking you to confirm that this is what you want to do. Continue.
    In just a few seconds, all 5 computers on your account will be deauthorized.
    Now, re-authorize just the computers that you still use and you'll be all set.
    Other Useful Notes About iTunes Deauthorization
    1. It's important to note that the Deauthorize All option is only available when you've used all 5 authorizations for your account and can only be used once every 12 months.
    2. If you no longer have access to a computer using one or your authorizations, or that computer no longer works, it can be pretty difficult to remove that authorization. In that case, it may be better to use friends' computers to reach the 5 authorization limit and then follow the Deauthorize All steps above.

  • ORA-01776: cannot modify more than one base table through a join view

    I have created EO based on a database view than consists of two tables, and only one is updateable.
    When I try to update a row using EO, I got a following message: "ORA-01776-cannot modify more than one base table through a join view"
    In Forms, this issue is resolved by setting "Query Only" property of non-updateable items to "True".
    Is it possible to do something like that in ADF BC?
    Thanks

    Thanks for answer.
    When I set "updateable" property to "Never", that attribute is protected from any change.
    I'm sorry for incomplete usecase.
    I have set up a list of value on that attribute, because it is a lookup field for another table and I need to get an ID from that table.
    Basically, I need that attribute to be updateble for BC, but not for database.
    Edited by: MarioK on Oct 13, 2011 9:28 AM

  • HP 3050 will not stay on the wireless network for more than a few minutes at a time.

    My HP DeskJet 3050 J610 is constantly dropping the wireless connection. It won't stay on for more than a few minutes. If I power cycle, it comes right back on, but drops again after a few minutes. It will print fine from a USB. When it drops off, pings time out even though the device shows "ready" in Windows 7, Windows XP and OSX. I've done everything HP suggests - static IP, upgraded firmware, diagnostic tools, etc. I am out of options.
    I can hit print right now, printer shows as ready, then I will get a print error. If I go over and power cycle the printer, my document will print - most of the time. It will remain on the network for a few minutes, then stop working. As soon as I power cycle it, I get a few more minutes before it drops. It has always done this from day one.

    I don't have another wireless network close by that I could test it on. I'm a little isolated. i might be able to work out a time when I could take it by a friend's house, but he's over an hour away.
    I have a Win 7 laptop, a Win XP desktop and an old Mac Powerbook as well as an iPod Touch and iPad 3 that use my wireless network without any problems - besides the fact that hardly any of my devices will talk to the other... But that's an OS issue. They all see the network, and the printer after I cycle the power on it.
    My wireless router is a Netgear WNR2000. I remember monkeying with the channels when I frist got this printer a few months ago, but I don't remember what all I did. Since I did a firmware update on the router, the channel is now set to Auto. If there's a channel you think I should try, let me know what it is. The printer shows up on the list of devices in the router, but that may be because I have its address reserved for the static IP. Interestingly, the router sees the printer, even though my devices cannot. I did a ping just now while checking that, and got this - which is unusual. Normally they all time out.
    Pinging 192.168.1.150 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Reply from 192.168.1.150: bytes=32 time=3223ms TTL=255
    Request timed out.
    Ping statistics for 192.168.1.150:
        Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 3223ms, Maximum = 3223ms, Average = 3223ms
    Played around a bit more pinging between devices and got this oddity - without a power cycle just a couple minutes later.
    ping 192.168.1.150 -n 50 -l 500
    Pinging 192.168.1.150 with 500 bytes of data:
    Reply from 192.168.1.150: bytes=500 time=527ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=10ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=12ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=13ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=11ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=17ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=10ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=17ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=11ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=21ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=17ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=13ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=13ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=21ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=11ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=10ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=22ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=22ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=9ms TTL=255
    Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
    Ping statistics for 192.168.1.150:
        Packets: Sent = 50, Received = 50, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 9ms, Maximum = 527ms, Average = 26ms
    Is there a possibility that the printer is going into a standby state and having trouble waking when traffic hits? I don't know if that's possible, just seems like it looking at this.

Maybe you are looking for