Cannot delete transportable module source location

Hi,
we're using OWB 10.2.0.1. Yesterday we created a transportable module for testing purposes and within the wizard a tm-source- and a tm-target-location. After deployment with control center it worked.
Afterwards we tried to delete all these new objects, first unregistering the tm-target-location, then deleting the transportable module and the locations. The problem is that the tm-source-location context menu doesn't show the delete action and therefore it couldn't be deleted.
Seems like the tm-source-location is registered in the control center, but it is not visible there.
I tried it with OMBPlus commands, too. But the answers after connecting to the control center and the design repository are always the same. When trying "OMBUNREGISTER LOCATION 'tm-source-location'" the answer is "Location tm-source-location is not registered.". Using "OMBDROP LOCATION 'tm-source-location'" results in "PUB01010: Object is not deletable.".
Is there a chance to delete the location directly manipulating the owb tables?
Any help would be appreciated! Thx.
omit

After creating the transportable module and its source and target locations I tried to register them in DEFAULT_CONTROL_CENTER, but got an error (I can't remember the issue in detail, but it was anything like a connection problem). So I created a new control center location CONTROL_CENTER1, connected to it, and got the locations registered and deployed the transportable module.
Later I figured out that I don't need the transportable module for our purposes and in first step, as I can remember, I deleted the control center location CONTROL_CENTER1. Next step was deleting the transportable module, unregistering und deleting the tm-target-location and the other steps I described before in earlier posts.
How can I get more information about the registered tm-source-location? To which (not existing) control center it is connected and so on? In RAB I can see and unregister the location, but I don't know for which control center this action takes place.
Thx for your replies.
omit

Similar Messages

After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps.

I can't sign out of iCloud on my iPhone 4 because I have the locator turned on for my phone and don't know the old password for my old Apple ID. I've tried all of the suggestions seen on here and the Apple ID site and cannot delete the cloud. Help?

I can't sign out of iCloud on my iPhone 4 because I have the locator turned on for my phone and don't know the old password for my old Apple ID. I've tried all of the suggestions seen on here and the Apple ID site and cannot delete the cloud. Help?

LPC1979 wrote:
... it keeps asking me for the OLD password (2 email addresses ago) and then when entered correct tells me the account does not exist...which I already know. ...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...

HI, TRANSPORTATION MODULE PROBLEM

HI,
CAN ANY BODY SAY
TRANSPORTATION MODULE CONFIGURATION STEPS
IN LOGISTICS EXECUTION.
REGARDS,
BALAJI.T
09990019711.

hi,
pl check this :
Please go through this document it will help you
1) Maintain transportation planning point through Menu as follows:
IMG Maintain Logistic Execution  Definition Enterprise Structure  transportation planning point.
Create your own like BP01 enter the general data¡¯s required
2) Defining modes of transport:
IMG RoutesBasic Transportation Functions  Transportation Logistic Execution Define modes of transportDefine routes
Use the standard like:
Shipping type: 01
Description: Road
3) Define shipping types :
Basic Transportation Transportation Logistic ExecutionIMG Define shipping types Route Functions
Or through T-code: SM30
PT: 01
Description: Truck
Mdtr: 01
STPG: 0001
4) Define transportation connecting point :
LogisticIMG DefineRoutes  Basic Transportation Functions  Transportation Execution Define transportation connection pointsroutes
Copy the std point and make it FB01 as departure zone and FB02 as destination zone
5) Define routes and stages.
 Logistic Execution IMG Define Define routes Routes  Basic Transportation Functions Transportation routes and stages
Use the standard route and copy it as FB0001 and enter the departure zone and destination as what we created.
6) Defining Transportation Zone:
Basic Transportation Logistic Execution IMG Define transportation Router determination  Route Transportation Functions zones
Use the standard transportation zone depending on the route so as for the example use 0000000003 - Southern Region
7) Maintain country or transportation zone for shipping points
 Logistic Execution IMG  Route determination  Route  Basic Transportation Functions Transportation Maintain country and transportation zone for shipping point
Shipping point be ASH1 and route as 0000000003 which is assigned to country India
8) Maintain route determination:
Logistic ExecutionIMG Route determination Route  Basic Transportation Functions  Transportation  Maintain route determination
Country of departure: India
Departure Zone: 0000000003
Country of destination: India
Destination Zone: 0000000003
And enter the datas needed like shipping condition 01, etc.
Maintain Transportation relevance for shipping point, sales document type and delivery types.
9) Now create shipping types
IMG Define shipment Shipments  Transportation Logistic Execution types
Copy the standard 0001 and make it to AFIL
10) Define and assign traffic zones through T-Code: T_76 (or) thru menu as follows
IMG Define Basic functions  Shipments cost  Transportation Logistic Execution and assign tariff zones
Copy the standard and make it to FABTARIFF and assign our transportation planning point as ATP1, ATP2 assign tariff zone to every particular transportation planning point
11) Define and assign pricing procedures
Shipments Transportation  Logistic Execution IMG define and assign pricing Price control  Pricing cost procedures
Copy the standard shipping cost pricing procedure SDFC00 to FBSC01
12) Assign purchasing data:
 Logistic Execution IMG Assign purchasing data Settlement  Shipments cost Transportation
13) Assign transportation planning point to shipping condition, purchase organization, purchasing group and to plants.
14) Define Automatic G/L account determination:
 Transportation  Logistics Execution IMG Automatic G/L Account Determination Settlement Shipment Costs
Or through T-code: OMWB
Use G/L account 614000 as used in standard
15) Automatic determination of CO assignments:
IMG Automatic Settlement  Shipment Costs  Transportation Logistics Execution Determination of CO Assignments
Or T-code: OKB9
16) Maintain shipping point address.
 Logistics Execution  Definition Enterprise Structure Define, copy, delete, check shipping point
17) Creating G/L account centrally.
Financial AccountingAccounting  Master Records  General Ledger 
Individual Processing Centrally
Or through T-Code: FS00
18) Enter the G/L account 614000 to the company code AFIL
19) Create transportation condition records:
 Shipment cost  Transportation  Master data Logistic Execution createPrices
Or thru T-code: TK11
Enter condition type FB00 that is freight condition type, which is used as standard in the shipping cost pricing procedure.
Enter the price and save it
Process:
1. The system determines the pricing procedure for the shipment cost item-using transportation planning point, service agent and shipment cost item category
2. Calculation Basis
3. Condition Record
4. Access sequence.
For the sales order, create a delivery using VL01N and pick the goods. Now create a shipment using VT01N and assign the delivery to the shipment document. Make sure to enter the carrier and other details before performing the transportation planning and execution. Save the shipment document and PGI for the delivery would be done automatically.
A shipment represents a physical goods movement between two or more locations.
For the system to create a shipment, shipping-relevant deliveries must exist.
You use Transportation Planning to group pending deliveries into shipments and then to perform the shipments.
The outbound delivery documents contain routes that the system calculates in route determination, and a transportation planning date for the delivery.
Dynamic transportation planning is responsible for grouping together outbound deliveries into shipments that have at least the same route, visit plan type and the same transportation planning date.
The following restrictions can be taken into account for a shipment in Dynamic Transportation Planning:
Weight
Volume
Variable capacity
Number of stops
Maximum duration
Loading units
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
Transportation Create Single document Logistics Logistic Execution  TransportationPlanning
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Single document Logistics Logistic Execution  Transportation Shipment cost Create
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select the line item and double click it.
Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Create Delivery:
T.code: Vl01n
Create TO:
T.code: LT03
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
 Transportation Planning  Create Single document Logistics Logistic Execution Transportation
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Single document Logistics Logistic Execution  Transportation Shipment cost Create
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select the line item and double click it.
Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Generally process is-
1) VL01N
2) VT01
3) VL02N - PGI
4) VI01
5) ML81N Service Entry Sheet
6) MIRO Invoice Verification
Shipping docs (VT01) are created before PGI...
You cannot carry out transportation planning or creation of shipment after the goods issue has been executed. Once goods issue is done it means that the material has left your premises so there is no need for a transportation planning after it.
In case you need carry out the shipment documents at the end of the day you could just create the delivery documents during the day and at end of the day create the shipment documents and the goods issue
regards
sadhu kishore

Cannot delete tracks after upgrading to iTunes 9

I upgraded to iTunes 9 today. Added a 14 tracks from a new album. Then when I went in to the tag details to bulk edit the album name, it only edited 13 of 14 tracks. I selected only the last track to try and edit it singularly, but the tag info has been grayed out and I cannot touch it. I cannot delete this track, I cannot edit it, and if I delete the whole album, just this track stays.
I checked permissions and I have the rights to read write this track. The permissions for this one track are no different from any other. Help!

I've encountered problems similar to this. Here's how I've dealt with it.
First, carefully examine permissions issues and refresh the iTunes library info if necessary. If you don't have write permissions for the folder containing the files or for the files themselves, iTunes will refuse to rewrite the tags even though it appears to take. You can set this by going to the Finder and using Get Info. If you've already added the files to your iTunes library while they were write locked for you, you will need to clear them from your iTunes library. For this, I typically copy the source audio to another location, delete the original location, remove dead tracks from iTunes (using Doug's Super Remove Dead Tracks ( http://dougscripts.com/itunes/scripts/ss.php?sp=removedeadsuper )), then copy the files back to their original location (with all permissions issues solved) and trying adding to iTunes again.
Even trying this, I've found some strangely coded mp3 audio tracks that don't allow you to alter tags in iTunes. I've gotten around this by importing each mp3 track into Fission (third party app) and saving back out as a new file. Fission doesn't reencode the audio, so you don't get additional lossy degradation. Doing this will clear up the quirky file headers/wrapper/metadata to make it iTunes tag friendly. While this last solution is tedious, it does fix finicky files.

Error connecting as DBA using Data Pump Within Transportable Modules

Hi all
I am using OWB 10g R2 and trying to set up a transportable Module to test the Oracle Data Pump utility. I have followed the user manual in terms of relevant grants and permissions needed to use this functionality and have sucessfully connect to both my source and target databases and created my transportable module which will extract six tables from a source database on 10.2.0.1.0 to may target schema in my warehouse also on 10.2.0.1.0. When i come to try and deploy / execute the transportable module it fails with the following error.
RPE-01023: Failed to establish connection to target database as DBA
Now we have even gone as far as granting the DBA role to the user within our target but we still get the same error so assume it is something to do with the connection of the Transportable Target Module Location and it needs to connect as DBA somehow in the connect string. Has anyone experienced this issue and is their a way of creating the location connection that is not documented.
There is no mention of this anywhere within the manual and i have even followed the example from http://www.rittman.net/archives/2006_04.html and my target user has the privilages detailed in the manual as detailed below
User must not be SYS. Musthave ALTER TABLESPACE privilege and IMP_FULL_
DATABASE role. Must have CREATE MATERIALIZED VIEW privilege with ADMIN
option. Must be a Warehouse Builder repository databaseuser.
Any help would be appreciated before i raise a request with Oracle

Did you ever find a resolution ? We are experiencing the same issue..
thanks
OBX

I cannot delete embedded album artwork in iTunes 12

I cannot delete embedded album artwork in iTunes 12. I download music from a service that sometimes has album artwork embedded, and I usually just delete it. Then I add the artwork from iTunes with the "get album artwork" command. But it only works if you can delete the embedded artwork first...and in iTunes 12, so far, I cannot. So I am stuck with the artwork that came with the files...and it's not always good. (Sometimes, it's even silly ads!)
In iTunes 11 and prior versions, I would highlight the songs in the album, right-click then choose "get info," choose the "details" tab, and put a checkmark next to the empty album art box for all songs. That would delete the embedded album artwork. You could also paste an image into the little box and it would apply to all the songs that had no artwork, to be sure they were all the same. Alternatively, I could also highlight the songs in the album, right-click then choose "get info," choose the "artwork" tab, and delete, cut or paste artwork right into the larger pane.
Without the ability to delete embedded artwork, I cannot maintain my library the way I'd like to. I even prefer the full album artwork to a "single" artwork, and so I even change the free iTunes downloads singles to the main album artwork.
Please help. Does anyone know how to delete album artwork in iTunes 12? I have a huge library and I want to continue to maintain it with the correct album artwork.

The new iTunes 12 Get Info dialog lacks right-click context menus (at least for now) but it still accepts most standard keyboard shortcuts and drag & drop actions.
Delete Artwork
On the artwork tab of Get Into, tap the image in question, use Backspace or Ctrl+X. Delete doesn't work.
Or, tap the image at the top left of Get Info, this time use Backspace or Delete, it is Ctrl+X that doesn't work.
Add Artwork
Select artwork, press Ctrl+C to copy, tap the centre of the Artwork tab, press Ctrl+V to paste.
Or, select artwork, press Ctrl+C to copy, tap the small image area at the top left, press Ctrl+V to paste.
Or, you can drag & drop to, or sometimes from, the same locations.
You can also copy artwork from the Get Info dialog to Windows Explorer with the keyboard shortcuts.
If the source image is on a web page right-click and use Copy Image rather than copy. (With Chrome I get a one pixel wraparound so tend to go for a temporary local copy anyway - not sure whose bug this is, but it isn't new.)
If you have multiple images embedded drag the one you want to be the primary artwork to the leftmost position.
Replace/Remove All Artwork
The top left image box can be used to add or delete art from multiple tracks. In either case all existing artwork in all tracks is replaced/removed.
Old Style Get Info Dialog (as given above)
Select some items, right-click, hold down shift, then click Get Info from the context menu. (Use alt/option on a Mac)
tt2

How to Delete Transport request for Delete client

Hi guys,
We are going for upgrade from 46C to ECC.
we found client XXX does not exists but Transport request for the client XXX does exists. so we plan to delete it or release it before going to upgrade.
But SAP does not allow me to delete or release it. Is there any special way to deal this issue.
Please suggest me.
Thanks
Jaichan

You could have the lost client XXX recreated again by system administrator using a "minimal" client copy (just users), should take only minutes and not much disk space.
Then you can release or delete the transports, afterwards delete the client again.
I don't know another way of doing it.
Thomas
P.S. all the other replies so far do not take into account that you cannot change transports that were created in a different client.
P.P.S did you ever look at the long text for message TK056? This clearly explains your options here
To transfer the request to the current client, proceed as follows:
1. Go to the request overview.
2. Position the cursor on the request and choose Request/task -> Display/change.
You are asked if you want to copy the request and all tasks belonging to it to the current client.
3. Answer "Yes".
The request is copied to the current client, and can then be edited as normal.
Note
For this procedure, you require the "Change source client" authorization contained in the SAP standard authorization S_CTS_TR_ALL.
You can copy only your own requests to another client.
In order to copy other users' requests, you first have to assign them to you.
You can reassign the request to you in another client only if the original client no longer exists (prerequisite: You want all client-specific entries to be deleted).
I was not aware of this up to right now...

I cannot delete an application

i cannot delete an application

(I'm the Tunnelblick developer.)
Recent versions of Tunnelblick include a button to "Open Uninstall Instructions in Browser", so that's the best way to start, however, babowa's advice to "check their website" was good:
There are specific instructions for uninstalling Tunnelblick at https://code.google.com/p/tunnelblick/wiki/cInstall#Uninstalling_Tunnelblick.
There is a forum at https://groups.google.com/forum/#!forum/tunnelblick-discuss.
The advice to drag it to the Trash was not so good, however.
Tunnelblick is a complex application that places files in several (OS X standard) locations on your hard drive, and to uninstall it completely you need to use the directions at that link. Just dragging it to the Trash may fail for any of several reasons, depending on how the program has been set up. Usually it is because the OpenVPN part of the program may be in use, even when the program itself is not running. (Tunnelblick is a GUI for OpenVPN and includes a copy of OpenVPN inside of the Tunnelblick application.)
If you have a "damaged" installation of Tunnelblick (which you do, because of the partial installation), the procedure is to first re-install the application and then uninstall. (The re-install is needed so the uninstaller is sure to have all the info needed to uninstall.) Because Tunnelblick is open source and free software, there are copies of Tunnelblick that have been "rebranded" with other names or internal identifiers; the uninstaller can uninstall those, too, but you need to re-install the rebranded version if it has been damaged.
Please read and follow the uninstall instructions carefully.
More help may be found by posting to the discussion group at https://groups.google.com/forum/#!forum/tunnelblick-discuss.

Delete file from original location and when copied size of file increases.

hi !
I have 2 exe's both of 1.15MB which I want to move to another folder. The files are copied to the folder but the size of exe increases to around 350MB each. What can be the problem ?
BufferedOutputStream bos=new BufferedOutputStream(new FileOutputStream(filename));
int o=bis.read();
do{bos.write(o);}while (o!=-1);
boolean del=this.fpara.delete();
System.out.println(del); Also, the file is not deleted from the original location even though I have used the delete function. The last line produces null output.

And do follow coding conventions
{color:0000ff}http://java.sun.com/docs/codeconv/html/CodeConvTOC.doc.html{color}
If your original source is all jammed up like the snippet you posted, I'm not surprosed that you can't spot your mistakes.
db
Edited by: Darryl.Burke on Mar 9, 2008 12:40 AM

Re: Satellite L450D Cannot delete file from desktop

Hi all, I was veiwing some photos on yahoo email via firefox version 3 6 3 sent by my sister in Australia, when this file appeared on my desktop which I cannot delete.
The file is called Pez & Lisa (after my sister and brother in laws photograph) when i try to delete it I get the message "COULD NOT FIND THIS ITEM, THIS IS NO LONGER LOCATED IN C/USERS/PAUL/DESKTOP VERIFY THE ITEMS LOCATION AND TRY AGAIN"
The file when I right click on proprties reads the file is 0 bytes size.
It cannot be deleted in safe mode or moved or renamed or anything!
Any ideas??

Hi Guys, thanks for your replies, however, there is nothing in startup or task manager to delete!
I have tried downloading unlocker, but it doesnt do anything when I click on it!! Maybe it doesnt work with Windows 7.
I suppose I can leave it alone as its not doing anything! its not worth a reformat just do get rid of an icon.
Ho Hum.

Cannot delete file Windows2Local/Components/{multiple}.settings

Every time I shutdown JSE it shows a couple of ugly messages saying:
"Cannot delete file Windows2Local/Components/classes.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
"Cannot delete file Windows2Local/Components/sources.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
"Cannot delete file Windows2Local/Components/watches.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
"Cannot delete file Windows2Local/Components/properties.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
"Cannot delete file Windows2Local/Components/designpattern.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
"Cannot delete file Windows2Local/Components/threads.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
Assuming that JSE had some problems to access my profile (oh, how I *hate* Windows...) I wanted to change the JSE working directory to C:\Projects\Java Studio Enterprise, but I can't find the place within the Tools|Options where I can set that. Help!
Regards,
Joost

Thanks for the reply. I added the -userdir option, and now it complains:
"Cannot delete file Windows2Local/Components/ComponentPalette.settings" in C:\Projects\Java Studio Enterprise\config"
"Cannot delete file Windows2Local/Components/CollaborationExplorer.settings" in C:\Projects\Java Studio Enterprise\config"
Hmmm, it seems to me that - although the number of error messages has been reduced - JSE is still not very happy about something. It would be nice if it was a bit more precise in its problem description.
Regards,
Joost

Cannot Delete CPTL file from Desktop using Vista

Hi All,
I cannot Delete CPTL file from Desktop using Vista. Explorer
crashes. It is a Captivate 2 file.
I have tried (with no luck):
- logging in as a different user and deleting the file.
- running explorer as an Administrator
- uninstalling Captivate.
Anyone got any ideas?
Cheers,
Raef

Hi Raef,
That is a strange issue. Here are a couple more ideas you
could try:
- Have you tried renaming the file (including suffix)?
- Have you rebooted?
- Do you get any error messages when trying to delete, such
as "Acess Denied"?
- Is your machine networked? Is it possible someone else has
the file open?
- Can the file be moved to another location or put in a
folder (and then deleted)?
- Have you tried using the Command Prompt / DOS mode to
delete the file?
It sounds like it could be a Vista issue so I would look at
the Microsoft Vista forums too. Sorry I do not have an exact
answer.
IHTH,
Aaron

Cannot delete messages from inbox, cannot move messages out of inbox, message do not copy to "sent" or "draft"

The following problems occur:
- cannot delete messages,
- cannot move messages out of inbox,
- messages do not copy "sent"
- messages cannot be saved to "draft"
This applies to imap and to gmail accounts.
The following has not helped:
- compact trash and other folder
- deinstall and reinstall TB 31.4.
- archive profile with mozbackup and replace profile from archive after reinstall of TB.
- deinstall and reinstall TB 31.3 downgraded
- delete all folders and files with "trash*" in the file name (all IMAP)
- delete all files of 1 mail account completely in the TB profile and resync from server (IMAP)
This might coincide with these system changes:
- upgrade to TB 31.4.
- some of these email accounts were installed on ios8 iphone.
Not sure if the problems had already started before these 2 occurrences.
Any help is appreciated to solve this.
Thanks!
fashi

What type of mail account is this (POP, IMAP, .Mac)? If POP, what are your Preferences > Accounts > Advanced > Remove copy from server settings?
You may be able to get rid of those messages in Mail doing Edit > Cut (⌘X) (for best results do it with one message or just a few at a time), but you should remove them from the server first if they’re still there.
Does this account allow web access? If not, you may find the Account Info window useful to solve this problem — choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window.

Unable to delete files from my startup disk; can move to trash and delete them there, but cannot delete from startup disk?

I constantly get a warning message that my startup disk is full and I need to remove/back up files from it. I have already backed up the files from my "All Documents" folder, which is on the left side of the menu in my startup disk. The problem is, I cannot delete those same files from the "All Documents" folder on my startup disk. It will let me move them to the trash, which I can empty, but they still do not delete from the "All Documents" folder. Does anyone know why?

Drag the files you want to delete (this applies to applications too) from their current location to the Trashcan icon in the dock. The trash will appear full. Hold down the control key and click on the Trashcan and select "Empty Trash" from the pop-up menu.
Alternatives to the control-click method: double-click on the Trashcan and click the "Empty" button in the upper right corner of the window that comes up; right-click on the Trashcan (only works if you have right-click enabled); press shift-command-delete; select "Emtpy trash..." from the Finder menu.

Cannot delete transportable module source location

Similar Messages

Maybe you are looking for