Cannot deploy EAR. There are already active sessions

Hi WebDyn Pro's,
I'm running NW SP14
Sporadically, I cannot deploy my WebDynpro app to the NW server. In NWDS, I indicate to Deploy and run. I get an error in the console indicating:
"Cannot log in. There are already active sessions. Session id 0 An administrator logged in via API /"
I restarted the server and the NWDS workstations but that didn't help. I've had this same error in the past. Usually it goes away. I thought I solved it, but evidently not.
On the NW server, I cannot log into SDM GUI either. I get the same error.
As mentioned above, this error occurs sporadically. I can deploy just fine 50 times. And then all of sudden I start getting this error, even though no one has touched the server.
Thoughts?
Thanks,
Kevin

Hi,
Have you checked if anyone else is actually using SDM to deploy?
There are some quite significant deployment tasks that my basis team perform which will occupy the SDM tool for a long time and stop me and my other developers from deploying anything.
I've also caused this problem myself when my SDM deployment has stalled - I've been deploying a custom B2B .ear file and the deployment has just got stuck in processing for ages. In the end I've had to kill the SDM task from Windows Task Manager but this causes SDM to think someone is still logged in so I've then had to restart the SDM service from the SAP Management Console.
If this is not the case I'd suggest raising it through OSS if you can't find any relevant messages on there.
Hope this helps,
Gareth Ryan.

Similar Messages

BBP_WFL_APPROV_BADI - There are already implementations active

Hi
I was thinking about using badi BBP_WFL_APPROV_BADI to set up different approvers for approval of the Shopping Cart in SRM. But unfortunately I get the message "There are already implementations active". Looks like SAP is already using this BADI. Does that mean that there is no way that I can use this BADI too?
Best regards
Steen

Hi Steen,
please look at BBP_WFL_APPROV_BADI in SE80. In the object tree you should see the implemantation(s).
Regards,
Clemens

I cannot open a new tab. When I press the tab bar, sometimes it opens, but most of the times it won't. It is especially so when there are already 5 tabs opened

I have a problem opening a new tab with FireFox 24.0.
When I press the tab bar, sometimes it opens, but most of the times it won't. It is especially so when there are already 5 tabs opened.
I use "checkCompatibility 1.3" and "Google Toolbar for FireFox 7.1.20110512W" as addons. There have been no problems until the previous version of FireFox.

Thank you for the reply.
It works fine with the safe mode. So it must be something to do with checkCompatibility 1.3 or Google Toolbar for FireFox 7.1.20110512W.
Both are necessary to run Google Toolbar on Firefox, and the fact is Google Toolbar is too convenient to be removed. So I have bookmarked a couple of blank pages and I right-click them to open new tabs. But it is so tiresome.
I hope this problem will be fixed in the next version. FireFox without Google Toolbar is just a useless browser.

There are no active responsibilities available for this user

Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
Bal

Is the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini

How come a USB will work with both Mac and Windows (as in that there are already files from Windows and Mac can still read and write onto it) but a external Hard Drive won't (as in there are files from Windows on there but Mac can read but not write)?

I have a Seagate Drive that I'm hoping to copy some movies from my Mac onto (because it only has a 512 SSD and I'd rather keep that empty and handy for more readily needed files) but it won't work. It shows up as a drive when connected (with the orange USB drive icon popping up) and is appropirately labeled "FreeAgent Drive", but when I try to copy files onto it it won't work. There are already windows files on there, such as some windows backups and lot's and lot's of pictures and videos. However, I have several USBs which already have windows files on them (namely movies, music, and other stuff) and copying and stuff works fine. Why won't it work with this hard drive and would work with USBs? Please help me out here guys, I am not experienced with Hard disks and formatting and stuff like that. 10 points for whoever helps me out the most. Thanks.

We will need to reformat your EXT, but it will then work on both Mac and Win
Connect the drive to your Mac, open disk utility
Go to the partiton tab and select '1' ... format should be ExFAT ... in options select MBR
Format the drive
It should now work on both OSs; report back

Tax ID SD cannot be checked (there are several/no tax records)

hi gurus,
1.i have the following message in green in status bar,when i m maintaining my tax condition records in vk11
Tax ID SD cannot be checked (there are several/no tax records)
above sd is the tax code this message is appearing for all tax codes including india and u.s. and other countries as well
2.how the system picks the value from the tax calculation procedure for example:taxinn,
here we maintain the tax code foreg : v6
and in vk11 we maintain for eg: mwst condition type and it asks for tax code my question is that we have not maintained any value for tax inn and tax code if FI than what is the purpose for doing it,.
thanks
please get back on it
mohit

answered

What is the command to check if there are any active calls before restarting the voice router?

what is the command to check if there are any active calls before restarting the voice router? thanks

Hi.
I can suggest show call active voice or show voice call status or show sip-ua call brief in case of SIP TSP.
HTH
Regards.
Carlo

When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?

When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

Tax ID 10 cannot be checked (there are several/no tax records)

Dear Friends,
While am saving the condition recored...thesytem triggere below message...does this create further problems?
Tax ID 10 cannot be checked (there are several/no tax records)
Thanks
Sasi

Dear Sai,
Yes I am creating condition records for the taxes....i am using two dummy tax codes for taxable aand non taxable rated and assigning the same to the condition records....i am getting the error...
Thanks
Sasi

I cannot activate my ipad1, i already activated it but i just restarted it and then when i turn it on st says activation required, but when im trying to activate it. i cannot activate it.. i connect it to itunes but it cannot read its content..

i cannot activate my ipad1, i already activated it but i just restarted it and then when i turn it on st says activation required, but when im trying to activate it. i cannot activate it.. i connect it to itunes but it cannot read its content..

See Here and follow all the steps...
http://support.apple.com/kb/HT1808

PRI channel busy issue , even when there are no active calls

Hi All ,
i using VWIC-2MFT - E1 CARD with VG. one PRI is working fine but on another PRI we are facing busy channel problem , even when there is no active calls , actually channels are not being free after disconnecting call. when we restart the gateway its startworking for some time ...
i already replaced that card .
please advice

I believe that this post should be made to the Unified Communications and Video forum.
Would please you repost to that group.
Thanks

SetMaxInactiveInterval() doesn't work fine when there are a few sessions

I'm using setMaxInactiveInterval() to set different values for sessions in
          program. When I test it, it works fine if there are only one or two
          sessions. But if there are more sessions, say nearly 10, they will be
          expired randomly such as at around 2 minutes when set to 3
          minutes(setMaxInactiveInterval(180)). BTW, my server is WLS6.1
          Any suggestion? Thanks a lot.
          Hattie


Why not keep things simple and create a shortcut on the user's machine that uses this target command:
\\SRV2\d$\dir1\subdir1\subdir2
Simply because dir and subdirs are no constants.
Just imagin you have a webpage that looks like this :
Proj. #   Custommer    directory    bunch-of-other-stuff
4538      Microsoft        \\SRV2\Big_contracts\US\2014\software   etc
4539      Nokia             \\SRV3\Prototypes\EU\2012\hardware      etc
4540      So-else          \\SRV3\Big_contracts\EU\2013\software etc
Instead of the full path you have a small folder icon (to save space). And clicking on this icon will bring you directly to said path.
It was extremely convenient, very user-friendly. And it has been working for over a decade, and today my users are frowning...
I think you are pushing psexec.exe beyond its limits.
No, it's working perfectly on Win XP. I just find it too sad that it no longer works on Win 7. I view this as a regression.
When you run it the way you do it you actually do open a further Explorer process but it remains invisible to you because it runs in the background.
No, the user does get a new explorer windows that pops to the foreground. The
only trouble is that it opens in "My Documents".
Of course I could (try and...) teach them to right-click, copy the link, paste it in an explorer and so on, but they are going to hate me.
Thank you

Cannot install yesod: There are files missing in ...

I'd like to install Yesod. According to this page, you need to do "cabal install Cabal cabal-install yesod".
I did that, and get a bunch of errors: http://pastebin.com/Egke6KER
Lots of "There are files missing in the xxxxx package"
Anybody knows how to figure this out?
BTW, I know that Yesod is available in AUR, but there are many dependencies and I don't want to install them manually.

@ngoonee
Hmm I just tried using yaourt, and apparently there are broken dependencies here and there, so I can't build it
@Leffe
I even uninstalled ghc, and re-installed it again. The same errors still occur.
Anyway, I think I'll wait for a while, untill all the dependencies are updated.

HT4913 When trying to "enable" my computer to accept I-tunes downloads, I'm told I can't because there are already 5 computers on the account. Is there a way to see which ones & how to remove them. I believe they're computers we no longer have.

Is there a way to "disable" old computers on I-tunes, so that I can "enable" my newer computer?

There is no list.
Deauthorize all, then authorize the active computers.

"Index could not be created: There are no active http servers known at the

Above error shows up during Index creation on KM section of the portal.
Checked the TREX Admin tool for Http connection . Pop up Error saying "IIS not installed. Configuration of Http communication not possible ".
Environment : TREX 7.1 revision 43 on Windows 2003 64 Bit platform.
During installation of standalone TREX , there were no option to select "http server".
Please suggest, if i am missing some thing in the setup or configuration here.
Thanks in advance .

1.) You need to make sure that the server you are installing TREX on, also has a Web Server. In your case, Internet Information Services (IIS 6.0) which comes with Windows Server 2003. Once this is installed make sure that it is working (http://hostname or IP).
2.) TREX 7.1 Rev 43 is very mature and does not involve many steps during installation. Your only option is to choose whether you want to install it or not.
3.) Setup of the "http connection" or "ABAP connection" is done after TREX installation. This is done straight from TREX Administrator.
Here is my suggestion:
1.) Install IIS 6.0 (http://www.windowsreference.com/windows-server-2003/step-by-step-guide-how-to-install-iis-60-in-win-server-2003/)
2.) Reinstalling of TREX is higly recommended but you can try it with the current installation.
3.) Open up TREX Administrator (trexadmin.bat) and proceed with create IIS Websites for TREX 7.10. The steps are located under the heading "Configuring the TREX Web Server" in the installation document.
4.) After this, go on with Indexing.
Regards,
Ravi

Cannot deploy EAR. There are already active sessions

Similar Messages

Maybe you are looking for