Cannot detect pci card

Hi All,
My setup,
2 PCI card.
Both card are on PC's PCI card slot,
both running perfectly functionally, but sometimes one of the PCI card is not detected.
When the PCI card is taken out from its slot and then Reinserted in the slot the PCI card is detected.
What can be the possible reason for the above.
Regards,
Shrek

Hey Shrekt,
The thing that immediately springs to mind is that perhaps you don't have a powerful enough PSU, or even possibly a failing PSU. You could try removing a card and seeing if the problem still occurs. What system are you running? Please include the wattage of your PSU.
Regards
Andrew George @ NI UK

Similar Messages

Cannot Detect Video card (Radeon 6750m)

Dear sir,
I would like to know why my laptop cannot detect my video card (Radeon 6750m). It only shows the built in graphic card intel. I already try to use system restore and reset to original factory mode. It will appear but after updating my drivers and reboot my laptop. My laptop cannot detect again the video card.
Please help me resolve this problem,
for you reference
http://tinypic.com/r/2it67ex/8
This question was solved.
View Solution.

You will have to enable the Radeon HD adapter by using the Catalyst Control Center.
Once you do that the adapter will appear in the Device manager.
If you are using the Intel HD graphics, only the Intel graphics will be seen in the Device Manager.
I know that may sound strange, but it is one of the pecularities of having a switchable graphics capable notebook.
The following URL goes to an overview of switchable graphics. Take a few minutes and read it. It should help make understanding it simpler.
http://support.hp.com/us-en/product/HP-Pavilion-dv4-Entertainment-Notebook-PC-series/5048648/model/5...
Do not instal the Intel graphics driver seperately!
Doing that breaks the switchable graphics feature.
Only install the HP ADM ATI graphics softpaq. It will install both drivers automatically and let you use the switchable graphics featrure og your notebook.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

P4N Diamond unable to detect PCI card(s) ??

Hello all P4N Diamond owners,
I just have one P4N Diamond board with me, was trying to play around, everything worked by "default". However, when I added PCI cards to the PCI-1 and PCI-2 slots, none of them able to detect my cards. These are the cards I have tried and proven working on other boards.
FlyVideo 2000 TV Card
SoundBlaster Audigy
el-cheapo 10Mbps LAN card
I don't have other PCI cards with me at the moment, but I doubt any of them will work.
Worse is on the FlyVideo 2000 TV card, it also "disable" 1394 and onboard Audio magically whenever I plug the card in.
BIOS I've tried : 1.4, 1.5. Same behavior.
So, I swapped with 945G Platinum, 955X Platinum, exact same config, those cards can be detected and working fine...
Do you guys have the same issue or it's just me?

Quote from: Maesus on 23-June-06, 15:40:01
ahh.... that is something I haven't tried yet. Good tips thanks!
hmm.... why did you say "force voltage into PCI slots" ? You suspect it "dropped" voltage to PCI slots?
nope not dropped in voltage. by default this option is enabled. and mobo is sending pulses to each one PCI slot to detect is there any device or not and if no device detected mobo is stop powerup the PCI slot which was no detected any device. by disabling this feature, mobo will forced to push PCI slots poweredup at all time doesnt matter is it used by any PCI device or not. so if that "autodetect" function of mobo report no device there PCI slot will remain unpowered. and that may a reason for not working.

Iphone 3GS cannot detect SIM card

Hi My iphone 3GS cannot detect the SIM card.
The phone shows full bar for service provider but 3G unable. It cannot receive incoming calls and make outgoing calls.

I am assuming you updated to version 5.1.1, not 5.0.1 since no legitimate version of 5.0.1 is available.
Where is this iPhone from and what means did you use to unlock it?

K8N Neo Platnium not detecting PCI cards

This is my second K8N Neo 2 Platnium board. Both of them have failed to detect the cards in the PCI slots. I know for sure that both of the cards work in my old system since i had to switch back to my old parts when i was getting my first board RMAed. The two cards are:
Creative Audigy 2 ZS sound card
Promise 100TX ATA controller card
I've disabled the onboard audio in BIOS, but that wouldn't matter since its not detecting either card. I've done the "search for new hardware" wizard in Windows XP Pro w/ SP2 and all updates as of Sept 26, 2005. I've tested it both inside and outside of the case so it isn't shorting.
I am P*ssed off.
Frankly, this is unacceptable. Not only that, but upon inspecting the second board right out of the package, I saw that it has been ran before. Long enough for dust to collect on some caps and on the SATA slots around the nForce chipset. Also, there were little rings around the mounting holes from where screws have obviously been screwed in before.
Not to mention i had to call them to send my RMA out. Website said it was ready to be shipped on 9-14-2005, I called on 9-20-2005, and it finally shipped out the following day.
I am not happy with my MSI purchase. This coming after hearing so much good about this company. Unless this problem is resloved I doubt I'll ever buy another one of their products again.

I had a similar problem with a 945p neo platinum board. Anything I plug into any PCI slot didn't detect. I solved the problem by flashing to the latest BIOS for the board. Now everything seems to be working fine.
Maybe that might work for you?

Detecting PCI Cards in Windows Xp using VISA

i have written a program to detect the cards for all Platforms.
When i use it LAb veiw RT it works fine but when i use it in Windows XP it does not work at all.
I have used VISA for detection .
Please find the code as attachment
Suresh Thangappan
Attachments:
PXi_info.zip ‏30 KB

Hello,
I ran the VI in my XP and it gives me an error because I don't have any PXI instrument, but if I do a GPIB it works fine. So, what do you mean by it doesn't work?
Does it gives you an error? What error and which VI is giving it?
Make sure that you have installed VISA in this XP machine and that versions match.
Let me know
Ricardo S.

MOVED: K8N Neo Platnium not detecting PCI cards

This topic has been moved to Intel P4 & Celeron P4 based board.
K8N Neo Platnium not detecting PCI cards

I had a similar problem with a 945p neo platinum board. Anything I plug into any PCI slot didn't detect. I solved the problem by flashing to the latest BIOS for the board. Now everything seems to be working fine.
Maybe that might work for you?

My 17" MacBook Pro cannot detect express card after the OS Mavericks update

Hi all, after I installed the update yesterday, I find out that my MacBook Pro no longer detects the PCI express card which I was able to use in OS Mountain lion, and I can't see it in both disk utility and recovery mode. Any suggestions? Thank you for reading this.

Seperde,
please review all of your installed third-party software to ensure that they’re compatible with Mavericks.

[solved]Cannot detect SD card after update

Hello all,
I frequently mount an SD card using:
$ sudo mount -t vfat -o uid=me,gid=users /dev/sdd1 /media/SD
However, after my latest pacman -Syu, my SD card isn't being detected by fdisk -l.
I tried hooking up an external USB SD card reader, but the result was exactly the same.
I'm terribly sorry that I don't have any idea what broke it (udisks perhaps?)
I'm using 2.6.33-ARCH, and Openbox. The SD card is a Kingston 4 GB SD HC that has always worked in the past and can still be detected on my uIEC/SD device.
Does anybody know how I can fix this?
EDIT: Today's update seems to have fixed the problem (ntfs-3g perhaps?).
Last edited by neilward (2010-04-12 00:44:42)

Hello all,
I frequently mount an SD card using:
$ sudo mount -t vfat -o uid=me,gid=users /dev/sdd1 /media/SD
However, after my latest pacman -Syu, my SD card isn't being detected by fdisk -l.
I tried hooking up an external USB SD card reader, but the result was exactly the same.
I'm terribly sorry that I don't have any idea what broke it (udisks perhaps?)
I'm using 2.6.33-ARCH, and Openbox. The SD card is a Kingston 4 GB SD HC that has always worked in the past and can still be detected on my uIEC/SD device.
Does anybody know how I can fix this?
EDIT: Today's update seems to have fixed the problem (ntfs-3g perhaps?).
Last edited by neilward (2010-04-12 00:44:42)

Sound Blaster Live 24-bit PCI Sound Card and Creative Sound Blaster PCI Card not detect

Ok here is my problem. I bought a Creative Sound Blaster PCI sound card a while back and it was working fine but recently when I would boot up my computer and try to play music say off of Winamp it says Bad DirectSound Driver. When I check device manager it shows no sound card there and in sounds and audio devices it says no audio device. Now my brother believed this to be a card fault so we went to Frys and bought a Sound Blaster Li've 24-bit PCI card. I uninstalled the old drivers and installed this new one but yet it's the same problem. My assumption was that Windows XP had something conflicting so I reinstalled the OS. It found the card and I installed the latest drivers?off of this site but now it does the same thing yet again with a fresh install of Windows XP. The card has been in all 3 of my PCI slots and it will detect it for a moment but then acts like as if the card was never installed. Like I never installed a sound card into the computer. The onboard audio has been disabled for a while now but I do not know what the problem could be. I did Scan for hardware changes but it doesn't show up. Sometimes when the card is detected if I do scan for hardware changes and the card is there it will just magically disappear from the device manager as if it was never there. Even when I try to load music and I see the card is detected it will not play the music and ends up locking up Winamp to the point that sometimes will go BSOD. Now I would really like to find out what the issue is because I am planning this weekend to swap out my motherboard with a duplicate board to see if that will end up fixing the problem but I want to find out if there is any other way to fix this issue. Thank you.Message Edited by AuXoIs on 02-25-200808:28 PM

Hmm what other options is there for the bios on PCI slots?Also anything you connect to the motherboard can have oxidization (I think its that) build up on the connection. Check the connector on the card and get a eraser (Pen eraser is better) and give it a good cleaning. The connector might have alot of build-up on it and you can see it by a dark yellowy colour. I cleaned my graphics card and ram connectors after they got alot of the build-up on them. On a older computer my graphics stopped working and this fixed it. Also I went away for a while (like a month) and came back to see that my puter didn't display anything. Opened it up and saw that the graphic card had alot of corrosion? on the card connector and in the slot. Does that if you computer is turned of for a long time. Had a heck of time trying to clean the slot out. One other thing that it could be is the sound card is faulty. I had an audigy 2 and it died a while back . It picks it up and then try and use it computer freezes and the after restart it's not there anymore. Hope it's not that problem. Hope this gives you something to go by.

Problems with Sound Blaster Live 5.1 (Cannot detect card) (Tryed CTco

Ok I run Sound Blaster Li've 5.
(SB0220)
(C6SB022842604209p)
Using Windows XP Pro SP2
Unfortunetly i cant find the disc that came with my sound card
I recently Reformated my computer and now I can't get my sound to work
http://www.n00bstories.com/image.fetch.php?id=07204808
http://www.n00bstories.com/image.fetch.php?id=24363942
I know the "!" next to Multimedia audio device isnt the problem because that was there before i reformated when the sound worked.
Ive Downloaded both:
Li'veDrvUni-Pack(ENG)
and
Li'veDrvPack_Patch
(Not 00% sure either of these drivers are the right thing for me sense when i type my model number into the driver search box it can't find it for some reason.)
I always get an error message that says "Setup cannot detect sound blaster audio device on your system.
Ive tried using Ctcomp with no luck
Does anyone have any idea on how to get my sound card to work?
Thanks in advance guys

You don't say what drivers your using.
2 threads to look at are http://forums.creative.com/creativel...ssage.id=25677 for drivers, and http://forums.creative.com/creativel...scending&page= for something that might help.You have a SB0228 according to that prefix.
I think to loose that message, you may have to either edit the registry of use something like driver cleaner http://www.drivercleaner.net/
Wow I'm too used to mark up

Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards

Hi,
My Lenovo Thinkpad X230 has an integrated 4-in-1 SD card reader (SD/SDHC/SDXCMMC), but it does not detect any card I insert. The two cards I have are working correctly under my sister's MacBook. My kernel version is 3.6.10. Here's the output of a few commands :
lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Lenovo Device 21fa
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: mei
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Lenovo Device 21f3
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i801_smbus
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
Subsystem: Lenovo Device 21fa
Kernel driver in use: sdhci-pci
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
Kernel driver in use: rtl8192ce
lsmod | grep sd
sd_mod 29560 4
scsi_mod 133434 2 libata,sd_mod
sdhci_pci 10834 0
sdhci 23695 1 sdhci_pci
mmc_core 82791 2 sdhci,sdhci_pci
Nothing new happens if I type dmesg | tail after inserting a card.
I didn't find any solution after searching on Google, but it seems there are a few other people experiencing the same problem as me. I haven't actively tried anything yet.
I don't have much experience when it gets to this kind of things, so I hope there are some of you who can help me.
Thank you!
Last edited by Fayden (2012-12-22 05:13:09)

In case someone else has the same problem, there's actually a package in the AUR that fixes the problem : https://aur.archlinux.org/packages/ricoh-e823-fix/
Install it and enables it with systemd and it should work correctly!

My iphone 5c cannot detect my sim card to get started to be activated

My iphone cannot detect my sim card and get activated. On top of the left corner indicates the word "searching"? Please Help

The iPhone is locked to a different carrier. Only that carrier and authorize unlocking so you can use the iPhone with other carriers, so you will have to contact that original carrier and ask if you qualify for unlocked and if so what their procedure is.
Regards.

Sim Card cannot detect

Hi, just to ask, why is my iphone cannot detect my sim card. the mesg is " No sim Installed". I did try my sim card to other phones an its working. Can anyone help me on this problem, i really appreciate any feedback. Thanks

A store can not unlock it. Unlocking is performed by the end user via iTunes after a request is submitted to the carrier and processed through them to Apple.
Your phone was hacked.

Cannot see PCI firewire card in MAX

Hi
I have a firewire camera connected to my computer via a PCI card. Using the software that came with the camera, I am able to capture images easily so there is clearly no hardware problem. However, I cannot seem to access the camera using MAX. If I go to the configuration tree and select My System > Devices and interfaces, all I see is PXI system (Unidentified) and Serial and Parallel. ie. I do not see NI-IMAXdx. If I select Software, I see all of the following on the list (and more) NI Vision, NI-IMAQ, NI-IMAQ for 1394, NI-IMAQdx.
Many thanks,
Gary

Hi,
Without wanting to just throw links at you, have a look at this KB and try the suggestion; otherwise post back!
Regards,
Tom
Applications Engineering, NI UK

Cannot detect pci card

Similar Messages

Maybe you are looking for