Cannot Detect Video card (Radeon 6750m)

Dear sir,
I would like to know why my laptop cannot detect my video card (Radeon 6750m). It only shows the built in graphic card intel. I already try to use system restore and reset to original factory mode. It will appear but after updating my drivers and reboot my laptop. My laptop cannot detect again the video card.
Please help me resolve this problem,
for you reference
http://tinypic.com/r/2it67ex/8
This question was solved.
View Solution.

You will have to enable the Radeon HD adapter by using the Catalyst Control Center.
Once you do that the adapter will appear in the Device manager.
If you are using the Intel HD graphics, only the Intel graphics will be seen in the Device Manager.
I know that may sound strange, but it is one of the pecularities of having a switchable graphics capable notebook.
The following URL goes to an overview of switchable graphics. Take a few minutes and read it. It should help make understanding it simpler.
http://support.hp.com/us-en/product/HP-Pavilion-dv4-Entertainment-Notebook-PC-series/5048648/model/5...
Do not instal the Intel graphics driver seperately!
Doing that breaks the switchable graphics feature.
Only install the HP ADM ATI graphics softpaq. It will install both drivers automatically and let you use the switchable graphics featrure og your notebook.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Z77A-G45 will not detect video card.

I though that I was having trouble with a new gtx 760sc, so I RMA'd it. On-board video works fine. Still can't detect video card. Bought a new power as well(antec HCG-750). After i received the new video card and still had the same issues I tried out other video cards. Tried two different nvidia cards. One was a 4 series and one a 5 series. Tried in both pci-e slots, and yes the correct power cables were plugged in.

CPU looks fine.
Was finally able to breadboard the thing today. Had the same issues at first. Then I tried the third pcie slot and got post. This one is pcie2.0, so I tried the other slots again. Was able to get the 760 to boot on th second pcie slot. Put the mb back in the case and lost boot on card again. Reseated, same issue. Breadboarded and was able to get the card to post. Still no post in case. Can't see what could be causing a short. Rearranging the risers right now to see if is one of the risers causing a short, or maybe not enough clearance. Any other suggestions would be appreciated.

H55m-e23 not detecting video card

Hello i recently upgraded my pc with new video card (asus engtx570 directcu ii gtx 570) the problem is that main board(MSI H55M-E23) is not detecting video card, so here is what happens when i turn the pc on it starts to beep 1long beep and 2 short beeps. First i thought it might be power suply so i bought new power suply with 700w and still the same thing happens, then i tryed with LC850w and same thing so i guess the power supply is not the problem. I removed rams and tryed with 1 stick, i have 4 different sticks and same thing happened with each stick. i tested the videocard on different mainboard (ASUS P5Q PRO and ASUS P8H67-M PRO REV. 3.0) and videocard worked fine. i tested my mainboard H55M-E23 with sapphire ATI HD 6950 and it worked too so the pci slot is ok, and now i dont know what to do more i tested all things possible. So what is the problem? my mainboard does not want to detect videocard (asus engtx570 directcu ii gtx 570) 3beeps ( 1long and 2 short) PLEASE HELP!

CPU: Intel® Core™ i5-760 Processor Clock Speed 2.8 GHz Max Turbo Frequency 3.33 GHz
Main Board: Msi h55m-e23 Bios: AMI BIOS Version 17.4
Video Card: Asus GeForce ENGTX 570 Direct Cu II
Memory: Kingston 1x2GB 1333MHz DDR3 CL9 DIMM 1.5V
Apacer 1x2GB 1333Mhz DDR3 CL9 1.5V
PSU: LC 850W Arkangel LC8850, 140mm FAN, V2.2
850W max., ATX V2.2, Free-Plug cable-Management, Active-PFC, 3 x PCI-Express, 4 x +12V: 60A, S-ATA,
+3,3V: 30A
+5V: 28A
+12V1: 18A
+12V2: 18A
+12V3: 18A
+12V4: 18A
HD: Seagate Baracuda 7200 - 320GB
Windows 7 x64
For the memory ( i did try with only 1 stick at the time... they go well together with my other card Sapphire ATI HD 6950)

Detect video card in 32 and 64 bit.

How can I get both the 32 and 64 bit versions of CS6 to detect my graphic processor (AMD Radeon HD7700) for GPU usage in Win 7 ? Cuiurently, it is only seen in 64 bit.

Thanks again Chris.
I again completely uninstalled the AMD Catalyst and drivers and reinstalled the latest one from their site. I am still unable to select Again, the card is not detected in the 32 bit version of CS6 and is readily available in 64 bit. Also very interesting is what the System info shows. i.e. Windows XP and yet I installed the lastest version of CS after I had updated to Win 7 on a new computer.
Here's what the system info shows in CS 6 32 bitr ..
Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x32
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3403 MHz
Built-in memory: 16344 MB
Free memory: 12841 MB
Memory available to Photoshop: 3255 MB
Memory used by Photoshop: 62 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7700 Series
And here's what it shows in CS 6 64 bit version ...
Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3403 MHz
Built-in memory: 16344 MB
Free memory: 13122 MB
Memory available to Photoshop: 14730 MB
Memory used by Photoshop: 71 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7700 Series
In my powerful mind, it appears that CS will only see the card in the 64 bit version. Not that it's a big problem with easy work-arounds but it puzzles me and I was hoping that someone else has had a similar experince and was willing to chime in.
Appreciate your time.

Iphone 3GS cannot detect SIM card

Hi My iphone 3GS cannot detect the SIM card.
The phone shows full bar for service provider but 3G unable. It cannot receive incoming calls and make outgoing calls.

I am assuming you updated to version 5.1.1, not 5.0.1 since no legitimate version of 5.0.1 is available.
Where is this iPhone from and what means did you use to unlock it?

No detect video card

Hallo i would like to post a problem when my computer boots up i get message using pcei gen 1then it says cant find device and then boots furtherinto
vga graphics mode i have a pce video card in pci 16 slot. I have in bios set as primary pce and internal video turned of .I hope someone can give me advice here are my specs taken with live update
Operating sys Windows 7 64 bit
Motherboardmodel 760ga-p43fx ms-7699
Curent Bios Ver 1.20
Graphics card standaard-vga adapter But i have msi hd 7750
Psu XFXpro 550Wat
I thank you

>>Posting Guide<<

Photoshop CS5 64-bit does not detect Video Card

I just updated from CS4 to CS5. I have a core i7 with an ATI HD 5700 series graphics card with the most recent driver 10.9. Photoshop is also updated to 12.0.1. For some reason, only the 64-bit version does not detect the graphics card. Photoshop CS4 64-bit and Photoshop CS5 32-bit see the graphics card fine. I noticed a few others have had the same issues. Has this problem been addressed yet? If not, is there a workaround?

It's a recently-reported issue with Catalyst 10.9 on the Radeon 57xx.
See this thread: http://forums.adobe.com/message/3184458
-Noel

Z87-g45 won't detect video card

I just got a 87-g45 and the on board graphics work fine with my dvi cable. I put in my gtx 660 but it won't detect it at all. I tried putting it in another computer and the card works fine. I saw another thread with a similar problem: https://forum-en.msi.com/index.php?topic=174991.0
I just flashed the bios to the one linked in the thread, but it didn't help. Should I plan to get a new motherboard or is there another way to solve this?

Quote from: XrBob on 29-December-13, 14:23:50
1. The computer runs fine through the onboard video, I'm using it right now to type this. Is it possible that the computer runs fine even with a bent pin? Is it easy to tell if I have a bent pin?
yes it may run fine if a pin that connects to the PCI-E connector is bent! you need to remove the cooler and CPU and look in the underlying socket with a Bright light and a magnifier to see if they are all strait and in line! with each other from a few angles like from above and then at a 45 degree angle to make sure they all look exactly the same!
Quote from: XrBob on 29-December-13, 14:23:50
3. Does that mean having the motherboard just hanging outside the case?
put the board on a piece of plain cardboard or wood (to prevent shorting) on a table and plug up the power and so on and see if it posts there (most builders do that before they put it in a case or place it on the motherboard box itself)!

KM4M how to enable both onboard video and video card radeon 7000

My motherboard is KM4M and I have a radeon 7000(this card has 2 heads: one DVI and one VGA), actually I need 3 monitors at the same time. when I install the card, the onboard video disappeared. how to enable all of them?
windows 2003
athlon xp 2800
Thansks

all onboard vga turn of once a vga cards put in
the 7000 and another pci vga card should work

Cannot detect pci card

Hi All,
My setup,
2 PCI card.
Both card are on PC's PCI card slot,
both running perfectly functionally, but sometimes one of the PCI card is not detected.
When the PCI card is taken out from its slot and then Reinserted in the slot the PCI card is detected.
What can be the possible reason for the above.
Regards,
Shrek

Hey Shrekt,
The thing that immediately springs to mind is that perhaps you don't have a powerful enough PSU, or even possibly a failing PSU. You could try removing a card and seeing if the problem still occurs. What system are you running? Please include the wattage of your PSU.
Regards
Andrew George @ NI UK

My 17" MacBook Pro cannot detect express card after the OS Mavericks update

Hi all, after I installed the update yesterday, I find out that my MacBook Pro no longer detects the PCI express card which I was able to use in OS Mountain lion, and I can't see it in both disk utility and recovery mode. Any suggestions? Thank you for reading this.

Seperde,
please review all of your installed third-party software to ensure that they’re compatible with Mavericks.

[solved]Cannot detect SD card after update

Hello all,
I frequently mount an SD card using:
$ sudo mount -t vfat -o uid=me,gid=users /dev/sdd1 /media/SD
However, after my latest pacman -Syu, my SD card isn't being detected by fdisk -l.
I tried hooking up an external USB SD card reader, but the result was exactly the same.
I'm terribly sorry that I don't have any idea what broke it (udisks perhaps?)
I'm using 2.6.33-ARCH, and Openbox. The SD card is a Kingston 4 GB SD HC that has always worked in the past and can still be detected on my uIEC/SD device.
Does anybody know how I can fix this?
EDIT: Today's update seems to have fixed the problem (ntfs-3g perhaps?).
Last edited by neilward (2010-04-12 00:44:42)

Hello all,
I frequently mount an SD card using:
$ sudo mount -t vfat -o uid=me,gid=users /dev/sdd1 /media/SD
However, after my latest pacman -Syu, my SD card isn't being detected by fdisk -l.
I tried hooking up an external USB SD card reader, but the result was exactly the same.
I'm terribly sorry that I don't have any idea what broke it (udisks perhaps?)
I'm using 2.6.33-ARCH, and Openbox. The SD card is a Kingston 4 GB SD HC that has always worked in the past and can still be detected on my uIEC/SD device.
Does anybody know how I can fix this?
EDIT: Today's update seems to have fixed the problem (ntfs-3g perhaps?).
Last edited by neilward (2010-04-12 00:44:42)

Cannot switch video cards

Searching as best I could, the only relevant question I could find was this: http://discussions.apple.com/thread.jspa?threadID=1823910&start=0&tstart=0
My problem, however, is slightly different. On the Energy Saver pane, I have the choice between 'Better battery life' and 'Higher performance'. And I can click the latter, at which point a dialogue comes down saying "Please log out for this change to take effect." I do so. When logged back in, however, I open System Preferences again, look at the Energy Saver pane, and although the "Higher performance" box is checked, it says next to it "You need to log out for this change to take effect". However many times I log in or out and check the box, that always happens. And the Systems Profiler shows only the "NVIDIA GeForce 9400M" (in the "Graphics/Displays" section"), when I believe the correct card should be "9600M GT". In fact, I thought that both cards should show up all the time.
Any ideas?

Rebooting I have tried (no difference to logging out). But I had never heard of the Apple Hardware Test - thanks for that, I'll hunt down the install disks and try that tomorrow morning.

MOVED: K9N Neo V3 Won't detect video card

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=137985.0

Quote from: XrBob on 29-December-13, 14:23:50
1. The computer runs fine through the onboard video, I'm using it right now to type this. Is it possible that the computer runs fine even with a bent pin? Is it easy to tell if I have a bent pin?
yes it may run fine if a pin that connects to the PCI-E connector is bent! you need to remove the cooler and CPU and look in the underlying socket with a Bright light and a magnifier to see if they are all strait and in line! with each other from a few angles like from above and then at a 45 degree angle to make sure they all look exactly the same!
Quote from: XrBob on 29-December-13, 14:23:50
3. Does that mean having the motherboard just hanging outside the case?
put the board on a piece of plain cardboard or wood (to prevent shorting) on a table and plug up the power and so on and see if it posts there (most builders do that before they put it in a case or place it on the motherboard box itself)!

[GeForce 6] Cannot play PARIAH SAYS CANNOT FIND VIDEO CARD

This is a fine example of the worst request for help. No offense, but as Stu mentioned you need to give more information.
My guess is that the drivers aren't installed properly for your card.
Suggestions on posting and getting better answers

Cannot Detect Video card (Radeon 6750m)

Similar Messages

Maybe you are looking for