Cannot dial outbound numbers from UC320

Hi, I've recently made some config changes with regards to the network on my UC320. I think these are all fine, as the unit is recieving calls, even forwarding them out of the office and remote access as well as internal access to the unit is fine.
Internal calls are fine, the only issue is when I press the access digits for the FXO or the SIP trunk the SPA phone just says Invalid number!
Any ideas apprecaited!

Hi Chris,
Have you changed the system from Blend or PBX to Key system? Please make sure the access digit is still defined in "Internal Dialing" and "Outbound Trunks" page in Configure Utility.
If these pages look fine, please contact the Small Business Support Center at the phone number listed (Please pick the appropriate phone number in your region) in the link attached? One of our engineers should be able to assist you.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Best regards,
Wendy Yang

Similar Messages

Cannot dial a number from a text message, or copy and paste

On my 9900 Bold I could press on a phone number in the text messages and the phone would dial. That function no longer works with the Z10. Can't even copy and paste a number from text messages to dial pad. Please help!

The issue is fixed in 10.1
You should be able to upgrade from Vodacom.
If not: Read this for one method to upgrade:
Upgrading OS10 devices using Autoloader
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Oarcle Lite cannot subtract negative numbers from date

Hello
we have a very strange problem. We have a query that need to convert times between different timezones. So, we have
In Oracle lite, the query
select sysdate - (-60/1440) nd from dual returns sysdate + 2 - 60/1440.
Whenever a negative fraction is subtracted from date, it always adds two days and then adds the fraction. Looks like negative of a negative fraction is not handled correctly in oracle lite.
Did anyone encounter this problem? We have the system in production and wondering if anyone found a solution.
Thanks

HI sd,
I suspect there's a simpler way, but this works, as seen in the example. Start and finish times are both incremented by one day as the data and formula are filled down the columns to show the effect of crossing the weekend days. Formula (as it appears in row 7) is shown above the table. The Row 2 version is copied below. Cels in column D are formatted as shown in the Inspector.
D2: =NETWORKDAYS(B2,C2,)+DURATION(,,24*(DUR2DAYS(C2-B2)-INT(DUR2DAYS(C2-B2))),,,)
Regards,
Barry

Cannot enter numbers from num pad or keyboard

Cannot enter numbers from the number pad or the keyboard.

That's an odd one, alright! When you state "format" I presume you're not somehow inserting the hyphen, correct? You're dialing 5551234 or 5555551234.
If a Restore does not correct the problem, presumably a Reset will not either, but try that (reset is press and hold the sleep/wake and home buttons until the Apple logo comes up (~10 seconds, ignore the slide to power off prompt, wait for the logo).
Else, I suspect a visit to an Apple Store (or a call to AppleCare) is your best bet.

E71 Cannot dial from Contacts List

With my E71 phone I cannot dial numbers directly from my Contacts List. I have to write number down then manually dial. What have I set wrongly? How can I correct this?
User of E71 Mobile Phone
Solved!
Go to Solution.

I found the answer myself. Just switch the phone off and on again to make it re-boot. Frustrating but just like a computer! or maybe it was taking it 30,000 feet into the air that cured it!!
User of E71 Mobile Phone

My iPhone 4S not compatible with 2008 Q7 Audi MMI. Now only phone numbers come up on screen, no name. Names appeared on the phone screen but not MMI screen. Cannot dial by contact info while driving anymore. Never had this problem with previous iPhones

My iPhone 4S not compatible with 2008 Q7 Audi MMI. Now only phone numbers come up on screen, no name. When someone calls, only the number appears on the MMI screen, not their name or whether they called from their office/home etc..   Same with missed calls, dialed numbers etc.. Names appeared on the screen of the phone, but not on MMI screen. Cannot dial by searching contact and name info while driving anymore. Never had this problem with previous iPhones. Is this an Apple issue or Audi issue? Anyone with this problem? Help!

NIGHTMARE Finally Ends, after nearly two weeks.
After trying for over a week trying to get my replacement iPhone 4S to activate, I ended up driving 110+ miles to an Apple Store to get a second replacement, which had been specially shipped there for me. Popped in the SIM card, went through the setup and I finally have an iPhone 4S that works, at least for the time being.
Advice to others who find themselves in this situation:
     1)     If you get these messages (see original post), the phone is bad. Demand a replacement.
     2)     If the AppleCare tech advises that the Apple Agreement Administration team is investigating, you'll be waiting for a week or more for them to complete it. Demand a replacement immediately, don't let them put you off indefinitely.
After the initial phone call documented in my original post, I was in daily contact, phone & e-mail, with the AppleCare tech trying to figure out the problem, and we tried everything, from forced restore's to switching SIM cards, conferencing w/ AT&T, etc. It seems that this was a case of first impression to Apple, but if it wasn't, then the problem is not well documented or known by those who should know, and for that, the blame should be on Apple, not the AppleCare tech who worked tirelessly trying to figure out a solution--I'd send him a case of beer if I knew where to send it.

I am unable to dial India toll free numbers from my iphone, these numbers are like 1800-***-1515. There is nothing as dial assist in Ios7.1.1 which i can disable and dial in india toll free numbers.Please respond if anyone has any solution

I am unable to dial India toll free numbers from my iphone, these numbers are like 1800-***-1515. There is nothing as dial assist in Ios7.1.1 which i can disable and dial in india toll free numbers.Please respond if anyone has any solution

Check this post, the dial assist is part of the iOS 7.1, according to page 49 of the iphone_user_guide
Make calls to your contacts and favorites while traveling abroad. (GSM) Go to Settings > Phone and turn on Dial Assist. Dial Assist automatically adds the prefix or country code for calls to the U.S.
This user had a similar problem and solved it by switching off the dial assist feature in Settings/Phone/Dial Assist
Re: How to save toll free no starts with 1800?

I cannot get Elemtnts 13.1 to download completely. I have three different case numbers from Adobe and nothing helps. I always get the "download failed" and the error code u44m1i210.

I cannot get Elements 13.1 to download completely. I have 3 different case numbers from Adobe and nothing helps. I always get the "download failed" and the error code u44m1i210. I would either like to get the product downloaded or eliminate the constant attempt which just ties up my computer.

You could try the direct download links here
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
And here is some info on that error code
Error U44M1I210 | Install updates

Cannot update my keynote, pages and numbers from my ipad. I have different accounts, one for app store and other for icloud. What can I do?

Cannot update my keynote, pages and numbers from my ipad. I have different accounts, one for app store and other for icloud. What can I do?

You can't merge accounts or transfer iTunes purchases from one Apple ID to another: but there is no problem about using two IDs.
Use your iCloud ID for iCloud for syncing email, contacts, calendars, bookmarks, and PhotoStream.
Use your other Apple ID as before for iTunes, iTunes in the Cloud and iTunes Match.
There's no conflict about doing this, and you won't even notice as Keychain will log you in with the correct ID in each case. It's also better security not to have your iTunes login also your email address, given the number of complaints about hacked iTunes accounts.

Cannot display more than 16 significant digit numbers from Oracle

The WebI Report cannot display more than 16 significant digit numbers from an Oracle data type field.
This occurs for both an ODBC and native driver connection to Oracle.
The data is defined by Number Data Type in Oracle, and view correctly in Universe, but display incorrectly in WebI report which created by InfoView.
I know BOE XIR2 has this behavior, but it seems that XI3.0 and XI3.1 also have this problem.
If this behavior in XI3.0 and XI3.1 perform by design? or it's a bug? and Why?
Thanks!

Hi Sarah,
Precision limitation of a Web Intelligence filter constant :
In an Oracle database, a Number field type can store up to 38 digits. When creating a Web Intelligence report in the Java Panel, a condition is specified for this field (that is represented in the universe as a number), and a constant number is entered for its value, only up to 15 digits of precision are retained.
For example, if 1234567890123456789 is entered, the value becomes 1234567890123460000.
Or, if you have a column in database which has a number like 123.123456789012345678 it will display only 123.123456789012.
Cause
The reason for this limitation is that Java Panel represents a number internally as a Double field type with only 15 digits precision. This is by design.
Resolution
The only workaround is to change the field type to a Character field; however, doing so means losing the ability to perform calculations and/or sorting on the field.
This issue has been raised as an Enhancement Request and given Track ID # ADAPT00908702.
Regards,
Deepti Bajpai

Dial Numbers from Global Directory on Cisco phone

Hi,
I want to dial numbers from the global directory on the 8961 phone. This worked a few days ago. Now it doesn´t anymore. Nothing has changed as far as i know.
I can see the contact after I searched it. I also the the number but when I press dial nothing happens.
Any tipps?
CUCM 9.1.2.10000-28

Hi Frank.
Is your cucm synced with an external LDAP?
Do you have this issue with both internal and external numbers?
Let me know
Regards
Carlo

Can I set up the phone so it can only dial certain numbers?

Can I set up the phone so it can only dial certain numbers?
I want to get an iPhone for a disabled user and want to reduce the potential for making mistakes.

You cannot prohibit an iPhone owner from dialing numbers, but you can certainly make it much more convenient to dial certain numbers.
Place the convenient numbers in either Phone favorites, or make those numbers the only contacts the person has.

E66 & mail for exchange - ocassionally cannot dial...

Hello, I have a E66 and about 1100 contacts synced through Mail for exchange from Outlook 2007. The numbers contain space as digit separator, e.g. +420 611 258 369.
It usually works o.k. for 1-2 weeks, but then I cannot dial any number either from dialed numbers list nor from the address book.I must restart the phone, and then it works - the same number that did not work 5 minutes ago. very strange
Updating firmware nor mail for exchange did not helped.
Q1: anybody else experiencing this?
Q2: what are the "acceptable" digit separators for Nokia?
Q3: any ideas - except for deleting digit separators?
Thank you.

I too have the same problem, tried reinstalling MfE deleting & creating the profile again etc. No success. Can anyone help on this?

Creation of virtual outbound delivery from MIGO.

Hi All,
Scenario - Material, packing material, virtual Goods receipt and virtual outbound delivery and PGI, and final billing.
We have a scenario wherein we have a Sales Scheduling Agreement for a material is created. The requirement will be generated and send to a vendor.
The vendor will send goods with packing material directly to the customer ( as it happens in third party ). Packaging material will be added in MIGO as non order item. Packing material will have unique identifiers numbers which the vendor will send and will be updated in MIGO ( as text ).
At the same time vendor will also send the data to SAP and on that basis MM guys will do a inbound delivery and Goods Receipt ( MIGO ).
This is the place where I need help.
As per requirement, we want to create an Outbound Delivery from the MIGO transaction. As soon as MIGO is saved, a outbound delivery should be created for already existing sales scheduling agreement. Delivery should have the main material and the packing materials and the Text ( to be copied from MIGO ).
I want to know how this can be acheived. Plz sugegst User Exits / BADI's etc.
Regards,
Danny.

Thanks for your valuable replies. I need some more help as the requirement is changed a bit.
We will get an ASN with only one line item as main material with packaging material text ( no line item for packaging material ). In MM side they will create n inbound delivery with only one item - main material with text in text field.
We want to create a outbound delivery on Post Goods Receipt save action.
The outbound delivery should have 2 line items, 1st for main material referencing the sales scheduling agreement, and 2nd needs to be programmatically added which will have Packaging material with text saved in text tab.
As suggested by Lakshmipathi Sir, I check include MV50AFZ1, USEREXIT_SAVE_DOCUMENT. But I am bit confused if this can be used for triggering Outbound delivery from PGR.
Request Gurus to suggest the best option for this requirement.
Regards,
Danny.

Transferring numbers from iPhone 3GS on O2 to iPhone4 on Orange

I'm sorry if this question has been answered elsewhere but I have had a look on several discussions and none seems to answer my particular query.
I have an iPhone 3GS with O2 with over 900 contacts on it. And lots of purchased music.
This is synced to my mac I use at work.
I have recently upgraded to an iPhone4 on a different network (Orange) and want to transfer all my contacts, calendars and music to the new phone.
Can anyone tell me how to do this please?

Thanks but this still doesn't seem to work.
I think I have followed the instructions but when I check the contacts I only have 72 and they are all email addresses, not phone numbers.
How can I get all my phone numbers from the 3GS onto the 4?
I'm not really that bothered about the calendar as I have very few things in it and can re enter them manually but the phone numbers will be an enormous task if I cannot sync them somehow.

Cannot dial outbound numbers from UC320

Similar Messages

Maybe you are looking for