Cannot disable a mailbox in Exchange 2013 CU6!?!?!?!

I cannot disable a mailbox in Exchange 2013 CU6. I get the following error:
Anyone seen this error? As you know, I just want to remove the Exchange attributes from the user object in Active Directory. Of course, deleting the user object works just fine but don't want to go that route.

I tried with the EMS (Powershell) and I still get an error:
[PS] C:\>disable-mailbox [email protected]
Confirm
Are you sure you want to perform this action?
Disabling mailbox "[email protected]" will remove the Exchange properties from the Active Directory user object and mark the mailbox in the database for removal. If the mailbox has an archive or remote archive, the archive will also
be
marked for removal. In the case of remote archives, this action is permanent. You can't reconnect this user to the remote archive again.
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):
Y
Active Directory operation failed on LocalDCName.local.com. This error is not retriable. Additional information: The parameter is incorrect.
Active directory response: 00000057: LdapErr: DSID-0C090CB9, comment: Error in attribute conversion operation, data 0, v2580
+ CategoryInfo : NotSpecified: (:) [Disable-Mailbox], ADOperationException
+ FullyQualifiedErrorId : [Server=LA-MBX01Server,RequestId=6ed97c1e-ae68-4670-a097-c4e65f683274,TimeStamp=11/18/2014 7:50:07 PM] [FailureCategory=Cmdlet-ADOperationException] 8D6C0FEB,Microsoft.Exchange.Management.RecipientTasks.Disable
Mailbox
+ PSComputerName : LocalDCName.local.com
I captured everything with the START-TRANSCRIPT cmdlet and changed the specific values to our organization (i.e., "[email protected]" and "LocalDCName.Local.com"). I've tried this on other mailboxes and I receive the same error whether
I use EMC or EMS. I believe this might be AD schema related just not sure where.

Similar Messages

Cannot edit/create new mailbox in ECP - Exchange 2013 CU6

Hello, I am currently running Exchange 2013 CU6. I cannot perform tasks related to recipients such as edit/create new mailbox. Additionally I cannot view the properties of the virtual directories.
I tried multiple browsers (Chrome, Firefox, IE) in different PCs and the result is the same
For example, I cannot click "Browse" in "new user mailbox" tab
"New local Mailbox move" page displays blank
I browsed through the event logs and found the following errors (Event 4 and Event 21):
Event 4
Current user: 'Unauthenticated'
Request for URL 'https://mailserver.address..com:444/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US(https://mailserver.address..capcx.com/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US)'
failed with the following error:
Microsoft.Exchange.Management.ControlPanel.BadRequestException:
The request sent by your browser was not valid. ---> Microsoft.Exchange.Management.ControlPanel.BadRequestException: The request sent by your browser was not valid. --->
System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at
System.Web.HttpApplication.ExecuteStep(IExecutionStepstep, Boolean&
completedSynchronously)
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at
System.Web.HttpApplication.ExecuteStep(IExecutionStepstep, Boolean&
completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.BadRequestException:
The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script
resources file.
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
System.Exception: 'ToolkitScriptManager'
could not generate combined script resources file.
Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance,
False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration,
True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging,
True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch,
False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups,
False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions,
False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices,
False],], Flights:[], Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],],
IsGlobalSnapshot: True
Event 21
Current user: 'Unauthenticated'
Script request for URL 'https://mailserver.address.com:444/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US(https://mailserver.address.com/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US)'
failed with the following error:
Microsoft.Exchange.Management.ControlPanel.BadRequestException:
The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script
resources file.
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
System.Exception: 'ToolkitScriptManager'
could not generate combined script resources file.
Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance,
False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration,
True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging,
True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch,
False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups,
False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions,
False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices,
False],], Flights:[], Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],],
IsGlobalSnapshot: True
Any help?

Hello Amy,
I will try to follow your suggestions. I will update once I get access to the server.
Anyways, the whole thing was back to normal for 1 day on its own, but right now the issue is happening again. Permission-wise, the account I used is in listed Organization Management role
Update: I forgot to try the EMS, but after I recycle the
MSExchangeECPAppPool, everything works fine, except for viewing Groups and Permissions
An error in the event viewer is displayed:
Current user: 'Unauthenticated'
Script request for URL 'https://address.com:444/ecp/15.0.995.28/scripts/js.axd?resources=EditRoleAssignmentPolicy&v=15.0.995.28&c=en-US(https://address.com/ecp/15.0.995.28/scripts/js.axd?resources=EditRoleAssignmentPolicy&v=15.0.995.28&c=en-US)'
failed with the following error:
Microsoft.Exchange.Management.ControlPanel.BadRequestException: The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance, False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration, True],[Eac.AllowRemoteOnboardingMovesOnly,
False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging, True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch, False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups, False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions, False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy,
False],[Eac.UnlistedServices, False],], Flights:[], Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],], IsGlobalSnapshot: True
However, after a while, things are back to normal... I don't understand what's happening..

Outlook 2010 clients cannot access their Online Archive mailbox in Exchange 2013??

Hello,
I have an issue where my Outlook 2010user cannot see/access their Archive mailbox when they are migrated from Exchange 2010 to Exchange 2013.
Both the live and archive mailbox is in Exchange 2013, the user can launch Outlook but if they click on their Archive mailbox it is unavailable.
Once the user is upgraded to SP2 or Outlook 2013 they have no issues accessing their archive mailbox.
These users have the minimum required Outlook version (14.0.6126.5000),
they are running 14.0.6129.5000.
Is there a different requirement on the Outlook client if the user has an archive mailbox in Exchange 2013 as well?
Thank you.

Hi,
Is there any update on this thread?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If
you have feedback for TechNet Subscriber Support, contact [email protected]
Simon Wu
TechNet Community Support

Large ETLTraces files after Exchange 2013 CU6

After installing Exchange 2013 CU6, you may notice the Exchange Drive is consumed a lot than before and the size is increasing rapidly. After troubleshooting, you may find everything is running properly and
there is no issues with your Exchange Server.
Then you need to check whether the files in the following location is the root cause:
C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Diagnostics\logfie
C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Diagnostics\ETLTraces
(You may find log files like “DocumentProcessingTrace_XX.etl )
Prior to CU6, there is not ETLTrace folder listed in this location and there are log folders however the log file has files no exceeding 7 MB size.
Post upgrade, there comes the ETLTrace folder and the files in this folder are close to 50 MB and the log files folder have log files exceeding 50 MB size.
This is a designed behavior in Exchange CU6, if you have limited hard drive space, as a workaround solution, we can safely remove or move the location of these lo files:
Before doing the changes, please firstly stop the health monitoring service. To Change the Log File Path, the Registry Key value is:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Search Foundation for Exchange\Diagnostics
To Change the ETLTrace path the registry Value is:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\16.0\Search\Diagnostics\Tracing
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

@Simon_Wu, I tried your solution. However after a couple of days the logs were moved back to the original, default location. It looks like the server has a process which checks for hacks and undoes any attempts to change the path.
Interestingly the altered Registry entries remained altered, however the files were switched back to the default location. It generates just over 1Gb of logs per day on a largely idling Exchange 2013 CU7 server with 350 mailboxes.
Go figure!
What I found to work consistently and reliably is to replace default folders with junction points to another folder on another drive.
I also found that these files are created by a process which runs under the System process (PID 4), therefore you'll need to restart the server in Safe Mode to replace the default folders with junction points.

Throttling policy not working on Exchange 2013 CU6

Hi,
We have a test throttling policy to restrict a mailbox to send at most 2 messages
per minute in our live Exchange 2013 CU6 enviroment. It was associated to a test mailbox. We have separated installed 2 mailboxe and 2 cas server roles in our enviroment. I have checked latest CU-s (7 & 8) but these are
not fixing any related bugs.
We tried lots of workaround (see below list) and solutions to fix this but it is still not working with outlook MAPI and OWA client.
Throttling policy not working
smtp service restart
RPC Client Acces service restart
The policy details:
Get-ThrottlingPolicy low_rate_limit |fl *limit*
MessageRateLimit : 2
RecipientRateLimit : 1000
Get-mailbox [email protected] | fl ThrottlingPolicy
ThrottlingPolicy : low_rate_limit
Do you have any idea what is the problem?
Thank you in advance.
br,
Zoltan

Hi Zoltan,
Base on my research, you need to configure the MessageRateLimit parameter on receive connector also.
The MessageRateLimit parameter specifies the maximum number of messages that can be sent by a single client IP address per minute. The default value for a Receive connector configured in the Transport service on a Mailbox server is
unlimited. The default value for a Receive connector configured on an Edge server is 600 messages per minute. The valid input range for this parameter is 1 to 2147483647. To remove the message rate limit on a Receive connector, enter a value of
unlimited.
https://technet.microsoft.com/en-us/library/bb125140(v=exchg.150).aspx
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Exchange 2013 CU6 migration batch

Hello
After install exchange 2013 cu6 server to root domain in multiple domain environment I cant move mailbox from exchange 2007 to new server because migration batch search mailbox only root domain controller.
ADTopology list all child domain dc without error.
setup /ps and /pad run without error.
but new-moverequest working.
please help.
Udvozlettel:Sneff Gabor

Hi
It might be a bug in the GUI as powershell is working. Did you also update exchange 2007 to its latest rollup?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Exchange 2013 CU6 installation hangs on step 9: Languages

Just had Exchange 2013 CU6 update hang on Step 9 of 18: Languages. It was stuck at 0% for almost an hour. I was able to get it moving forward by disabling SCEP 2012 by killing the process and deselecting check certificate for server certificate
revocation in IE. Both steps were taken nearly simultaneously and the install process for Exchange jumped up immediately. Both steps were taken based on info from:
https://social.technet.microsoft.com/Forums/exchange/en-US/2a346a37-d092-4189-8a07-e8a9971925f1/cu2-installation-hangs-on-step-9-languages?forum=exchangesvrdeploy
and
https://social.technet.microsoft.com/Forums/exchange/en-US/0975bb5e-f270-4e39-abf3-70809cd98161/exchange-2010-sp3-installation-hangs-language-pack-hell
Just wanted to post that this issue was encountered on CU6 as well. Has anyone had a similar experience or able to tell which of these two steps (or both) is actually needed?

Hello,
Thanks a lot for sharing, saved my day!
Cheers:)

Configure a Catch-All Mailbox in Exchange 2013

Is it possible to create a catch-all rule which delivers mail sent to a non- existing mail address inside the organization (*@contoso.com), to a specific
mailbox?
Exchange 2013 Standard

Hi All
I have also used the Catch all agent from Codeplex, with great success.
The only issue is, that the catch all transport agent HAS TO be installed, while your still at level CU3 or lower.
We are now at exchange 2013 CU7, and the Catch all agent still works like a charm.
Forget about journaling rules, these doesn´t work, in my experience

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
I open the remote power shell to the exchange server 2013.
Issue the following commands and getting the following error.
$mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
At line:1 char:27
+ $mailbox.EmailAddresses -= <<<< "eum:50004;phone-context=telExt5digits.lync5.com"
+ CategoryInfo : InvalidOperation: (op_Subtraction:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFoundHelp!

Now for an answer - your remote session doesn't have the same object you have on the server itself. Notice it says this is an array list, not a ProxyAddressCollection. If you need to work around this, you'll need to massage the addresses another
way that the system will accept. I'd try the following:
$NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
See what you get in the $NewAddresses variable when you do this.

MS KB3011140 breaks information store in Exchange 2013 CU6

Hello,
Last night Microsoft KB 3011140 was inadvertently installed on our Exchange 2013 CU6 server. I just want to warn everyone that you should be very cautious with this update. Upon reboot, the information store would crash, recover, then crash and
recover, infintly. End user symptoms are the pop up bubble in the lower right regarding Outlook lost connectivity to Exchange server, then a few minutes later Outlook restored connectivity to Exchange, rinse and repeat.
This constant up and down would cause many freezes and slowness in Outlook. The last time we had this issue was when we went to CU6. Microsoft tech support though free of charge installed a patch Exchange2013-KB2997209_2997847-x64.en.msp and
that fixed our problem. They left the patch for us, so I thought I would try to re-run this. It progressed for awhile and then rolled back saying it encountered an unexpected error (what else is new?).
So I removed KB 3011140 which took about 35 minutes to do and upon reboot Exchange is back up and running.
The only side effect I am noticing today is Lync 2013 is asking for Exchange credentials and EWS Internal / EWS External URI's are not populated, however I have no issues reading my conversation history and calendar in Lync. I need to reboot my machine
yet but other people have started reporting the same thing.

Hi KJSTech1,
Thanks for your generous sharing and glad to know it works after recycling the MSExchangeServicesAppPool.
It's really hard to say why the patch cause this issue, since I didn't find someothers has the same issue. Thanks for your reporting.
Thanks
Mavis Huang
TechNet Community Support

Moving mailbox from exchange 2013 back to exchange 2007 ..

Hi Guys,
I recently configured configured co-existence between exchange 2007 and exchange 2013. I moved a pilot user from exchange 2007 to exchange 2013 and now the user has issues receiving mails.
I am trying to move the user back to 2007 pending the resolution of the issue. The move status says completed but the mailbox remains in the exchange 2013 environment.
I need to return the user to an exchange 2007 mailbox database ..any ideas on what I am missing.
Thanx guys ..
~Richard
..forever is just a minute away*

Hi Richard,
Please move your mailbox from Exchange 2013 to 2007 from the Exchange 2013 admin center (EAC) and the Exchange Management Shell instead of EMC in Exchange 2007.
Then check whether the issue persists. If possible, please provide more error logs for further analysis.
Regards,
Winnie Liang
TechNet Community Support

Migrate mailboxes from Exchange 2013 to Exchange 2010

Hello,
We have a merger and would like to know if it is possible to migrate mailboxes from Exchange 2013 to Exchange 2010 in a cross-forest scenario.
Or should we first upgrade destination Exchange 2010 to 2013?
Peteris

Hi Peteris,
Based on my tests, we can move mailboxes from Exchange Server 2013 to Exchange server 2010. You can use the Prepare-MoveRequest.ps1 script in the EMS to prepare mailboxes for cross forest moves.
For more information about it, here is a helpful article for your reference.
Prepare mailboxes for cross-forest moves using the Prepare-MoveRequest.ps1 script in the Shell
http://technet.microsoft.com/en-us/library/ee861103(v=exchg.150).aspx
Hope my clarification can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

DC Restart when start installing Exchange 2013 CU6

I have a domain installed on windows server 2012 R2 with function level 2008 R2 and when i try to install "as a administrator" Update for exchange 2013 CU6 or CU5 DC restart and am facing this error :
Error:
The following error was generated when "$error.Clear();
install-CannedAddressLists -DomainController $RoleDomainController
" was run: "Microsoft.Exchange.Data.Directory.ADTransientException: Failed to reconnect to Active Directory server Make sure the server is available, and that you have used the correct credentials. ---> System.DirectoryServices.ActiveDirectory.ActiveDirectoryServerDownException:
Active Directory server is not available. Please retry at a later time.
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnectionFromPool(ConnectionPoolType connectionPoolType, ADObjectId domain, String serverName, Int32 port, Boolean& serverConnectionPresentButDownOrDisconnected)
at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnection(ConnectionType connectionType, String partitionFqdn, ADObjectId domain, String serverName, Int32 port, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnection(ConnectionType connectionType, String partitionFqdn, NetworkCredential networkCredential, String serverName, Int32 port)
at Microsoft.Exchange.Data.Directory.ADDataSession.GetConnection(String preferredServer, Boolean isWriteOperation, String optionalBaseDN, ADObjectId& rootId, ADScope scope)
at Microsoft.Exchange.Data.Directory.ADDataSession.GetWritableConnection(String preferredServer, ADObjectId identity, ADRawEntry scopeDeterimingObject)
I already prepare AD and Schema before start install
Please Advice Thanks

Hi Midoooz
Thank you for your question.
Do you install the Exchange Server on the DC?
From you posted error, I think you can try to make your exchange server in maintenance mode, then you can try install exchange CU6.
You can refer to the following link:
http://support2.microsoft.com/kb/2713696
Note:
Stop Maintenance Mode on the computer that is running Exchange Server after the Exchange Server 2013 CU6 upgrade is completed.
If there are any questions, please let me know.
Best Regard,
Jim

Exchange 2013 CU6 event id 1003

Installed cu6, after that OWA and ECP stopped to work, with a redirection loop, when I check my eventlogs I see thousands of this error message:
RpcHttp] An internal server error occurred. The unhandled exception was: System.MissingMethodException: Method not found: 'System.String Microsoft.Exchange.Security.Authentication.IIdentityExtensions.GetSafeName(System.Security.Principal.IIdentity)'.
at Microsoft.Exchange.HttpProxy.ProxyModule.<>c__DisplayClasse.<OnEndRequest>b__d()
at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)
Cant find a workaround, anyone else seen this error?

Maybe this can help someone.
v
Replaced SharedWebConfig files under the location "V15\FrontEnd\HttpProxy"
v
Added the missing permission on Exchange Back End Web Site by comparing the same with our lab
v
On IIS
è Exchange Back End
è Changed Physical Path
è it to "V15\ClientAccess"
v
Still after which we couldn’t browse OWA under Exchange Back End using Port 444 but found that ECP works fine
v
Replaced the SharedWebConfig file from working Exchange 2013 CU6 under the location "V15\ClientAccess"
v
Ran IISReset
v
Confirmed that OWA and other virtual directories as well started working fine without any issues

Exchange 2013 CU6 update cannot pass preresquites?

When I go to update our Exchange 2013 server to CU6 (from CU5) I get the following error:
I was doing something with the Tasks, which cannot be scheduled anymore. How do I fix this?
Thanks
Error:
The following error was generated when "$error.Clear();
try
$Target = $env:COMPUTERNAME
try
$exSrv = get-ExchangeServer $Target -ErrorAction SilentlyContinue
catch
Write-ExchangeSetupLog -Warning "Unable to set monitoring and server state to inactive. Setup will continue.";
if ($exSrv -eq $null)
Write-ExchangeSetupLog -Warning "$Target is not an Exchange Server. Unable to set monitoring and server state to inactive. Setup will continue.";
return
Set-ServerComponentState $Target -Component Monitoring -Requester Functional -State Inactive
Write-ExchangeSetupLog -Info "Monitoring has been set to Inactive while setup is running."
Set-ServerComponentState $Target -Component RecoveryActionsEnabled -Requester Functional -State Inactive
Write-ExchangeSetupLog -Info "RecoveryActionsEnabled has been set to Inactive while setup is running."
Set-ServerComponentState $Target -Component ServerWideOffline -Requester Functional -State InActive
Write-ExchangeSetupLog -Info "The server state has been set to Inactive while setup is running."
catch
Write-ExchangeSetupLog -Warning "Unable to set monitoring and server state to inactive. Setup can not continue.";
throw;
" was run: "Microsoft.Exchange.Data.Directory.ADOperationException: Active Directory operation failed on EXCH01.domain.local. This error is not retriable. Additional information: Insufficient access rights to perform the operation.
Active directory response: 00002098: SecErr: DSID-03150E49, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
---> System.DirectoryServices.Protocols.DirectoryOperationException: The user has insufficient access rights.
at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, Nullable`1 clientSideSearchTimeout, IActivityScope activityScope, String callerInfo)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Directory.ADDataSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
at Microsoft.Exchange.Management.SystemConfigurationTasks.SetServerComponentState.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Error:
The following error was generated when "$error.Clear();
try
$Target = $env:COMPUTERNAME
try
$exSrv = get-ExchangeServer $Target -ErrorAction SilentlyContinue
catch
Write-ExchangeSetupLog -Warning "Unable to set monitoring and server state to inactive. Setup will continue.";
if ($exSrv -eq $null)
Write-ExchangeSetupLog -Warning "$Target is not an Exchange Server. Unable to set monitoring and server state to inactive. Setup will continue.";
return
Set-ServerComponentState $Target -Component Monitoring -Requester Functional -State Inactive
Write-ExchangeSetupLog -Info "Monitoring has been set to Inactive while setup is running."
Set-ServerComponentState $Target -Component RecoveryActionsEnabled -Requester Functional -State Inactive
Write-ExchangeSetupLog -Info "RecoveryActionsEnabled has been set to Inactive while setup is running."
Set-ServerComponentState $Target -Component ServerWideOffline -Requester Functional -State InActive
Write-ExchangeSetupLog -Info "The server state has been set to Inactive while setup is running."
catch
Write-ExchangeSetupLog -Warning "Unable to set monitoring and server state to inactive. Setup can not continue.";
throw;
" was run: "Microsoft.Exchange.Data.Directory.ADOperationException: Active Directory operation failed on EXCH01.domain.local. This error is not retriable. Additional information: Insufficient access rights to perform the operation.
Active directory response: 00002098: SecErr: DSID-03150E49, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
---> System.DirectoryServices.Protocols.DirectoryOperationException: The user has insufficient access rights.
at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, Nullable`1 clientSideSearchTimeout, IActivityScope activityScope, String callerInfo)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Directory.ADDataSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
at Microsoft.Exchange.Management.SystemConfigurationTasks.SetServerComponentState.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Error:
The following error was generated when "$error.Clear();
try
$Target = $env:COMPUTERNAME
try
$exSrv = get-ExchangeServer $Target -ErrorAction SilentlyContinue
catch
Write-ExchangeSetupLog -Warning "Unable to set monitoring and server state to inactive. Setup will continue.";
if ($exSrv -eq $null)
Write-ExchangeSetupLog -Warning "$Target is not an Exchange Server. Unable to set monitoring and server state to inactive. Setup will continue.";
return
Set-ServerComponentState $Target -Component Monitoring -Requester Functional -State Inactive
Write-ExchangeSetupLog -Info "Monitoring has been set to Inactive while setup is running."
Set-ServerComponentState $Target -Component RecoveryActionsEnabled -Requester Functional -State Inactive
Write-ExchangeSetupLog -Info "RecoveryActionsEnabled has been set to Inactive while setup is running."
Set-ServerComponentState $Target -Component ServerWideOffline -Requester Functional -State InActive
Write-ExchangeSetupLog -Info "The server state has been set to Inactive while setup is running."
catch
Write-ExchangeSetupLog -Warning "Unable to set monitoring and server state to inactive. Setup can not continue.";
throw;
" was run: "Microsoft.Exchange.Data.Directory.ADOperationException: Active Directory operation failed on EXCH01.domain.local. This error is not retriable. Additional information: Insufficient access rights to perform the operation.
Active directory response: 00002098: SecErr: DSID-03150E49, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
---> System.DirectoryServices.Protocols.DirectoryOperationException: The user has insufficient access rights.
at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, Nullable`1 clientSideSearchTimeout, IActivityScope activityScope, String callerInfo)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Directory.ADDataSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
at Microsoft.Exchange.Management.SystemConfigurationTasks.SetServerComponentState.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

Based on "Was Run" error it looks like you don't have permission to store something in AD. Can you try putting server into maintenance mode first and see if you can?
http://windowsitpro.com/blog/installing-exchange-2013-cu1-dag-member-servers-some-care-and-maintenance-mode-required
http://vanhybrid.com/2013/11/28/script-putting-exchange-server-2013-into-maintenance-mode/
If server goes into maintenance mode successfully then re-run the setup...

Cannot disable a mailbox in Exchange 2013 CU6!?!?!?!

Similar Messages

Maybe you are looking for