Cannot disable internet connection and use wlan co...

hi i have download skype and i cant use it with my wlan connection because its already connected with internet and i might get charge for using this service could you please tell me how to disable internet and use wlan connection when i am in home
my handset details are
 its made in hungary  software version is v 11.0.0.029 software date 11-08-10 rm612
and there is no update availabe for my handset at the moment

It sounds like you are using an unsupported App like "Jailbreak" which technically voids the warranty on your iPhone. Your call on that.
If so, the app creates an "ad hoc" wireless network which the Airport Express cannot join or participate in. So, you cannot use both the AirPort Express and the "modem" function of your iPhone at the same time.
You should be able to turn the app off and log off the internet, and then setup another separate wireless network to run AirTunes, or AirPlay. But, you'll have to "switch" wireless networks to be able to do this and the network will of course not have access to the Internet.
Message was edited by: Bob Timmons

Similar Messages

  • If I connect a time capsule via ethernet to an existing internet connection and use it to create a private wifi network for my wireless devices, will other users on the primary network (not the private wifi one) be able to access my files on my TCapsule?

    Like it says in the title basically.
    I want to use a time capsule to store my files and backups and access it from my phone and MacBook Air. However I do not want the others in my house who are currently connected to the same wifi/ethernet router to use my connection or my TC hard drives.
    I had also been thinking about wirelessly extending the wifi network (a linksys N router) but I guess that will allow everyone to access my Time Capsule?
    I hope you guys can help me.
    Regards, Guido

    ......will other users on the primary network (not the private wifi one) be able to access my files on my TCapsule?
    No, if you have not provided them with the Time Capsule device password. 
    Users will be able to "see" the Time Capsule icon under the SHARED heading in the Finder on their Macs, but they will not be able to access the drive or the files.
    I had also been thinking about wirelessly extending the wifi network (a linksys N router) but I guess that will allow everyone to access my Time Capsule?
    Same answer as above.

  • Can I use Ethernet for Internet connection and Airport express for printer

    How / can I use Ethernet for Internet connection and use an airport express to set up wifi for printer and Apple TV?
    Macbook Pro. OS X 10.9.4

    I've never tried it, so I don't know what the results will be.
    However, you can move Ethernet to the top of the Services list in Network System Prefs which will cause it to be the Internet source. There is a command in the gear menu to set the Service order.  However, after thinking about it, if there isn't an internet connection via Wi-Fi, it might automatically drop down to the Ethernet connection.
    Then, you can set up your Wi-Fi so that it doesn't connect to the Internet, as Linc stated. How to do that would be dependent on the Router.

  • Using Remote app on iPhone 5 without a separate internet connection and wifi router.

    Hi,
    I need to be able to control iTunes within my MacBook Pro remotely. Using my mobile broadband service and wireless router I've been able to get the Remote app to allow my iPhone 5 to do the job nicely through Home Share.  So I went and bought a separate WiFi router and tried to do the same thing. Of course when it didn't work, I discovered that I need an internet connection and WiFi network to make the Home Sharing work.
    So I got to thinking, can I create a WiFi hotspot using the Personal HotSpot functionality of my iPhone, set up Home Sharing on phone and MacBookPro and then use the Remote app. Ideally this would work as it seems all the key components are in place.
    The MacBook Pro accepts the iPhone hotspot as a means of Home Sharing, however the iPhone won't use the personal hotspot to Home Share and I can't connect to the iPhone personal hotspot on the iPhone itself.
    Does anyone know how to make this work for me? It would be such as neat solution if I can get it to work - not to mention the potential to save me about $200 (I need to set this model up for two people).
    Cheers
    Kathy

    Same trouble here, iPad 2 with latest OS and remote app, iPod with latest OS and app.

  • Using Bridge CS5 exporting to flickr get error message "Unable to connect to Flickr, please check your internet connection and try again."?

    using Bridge CS5 to exporting to flickr, but get error message "Unable to connect to Flickr, please check your internet connection and try again."  please help?

    I'm experiencing the same problem. Don't think I can help, but maybe I can offer an explanation. It looks as if Flickr has changed their API and Adobe will need to update the export plugin to comply to get it working again. I found this announcement on Flickr:
    Flickr: The Help Forum: [Official Thread] Flickr API switching to https-only on June 27th, 2014!

  • Hi. I have temporarily moved away from home. I am using a different internet connection, and I have lost my bookmarks. How do I get them back?

    Hi. I have temporarily moved away from home. I am using a different internet connection, and I have lost my bookmarks. How do I get them back?

    Generally speaking, your bookmarks are private to your computer, and if you set up multiple Firefox profiles on your computer, to the one profile.
    Your bookmarks might be available to you at another location if you used the Sync service. In order to connect a new computer to the Sync service when you aren't near your old computer, you need a recovery key. https://support.mozilla.org/en-US/kb/share-bookmarks-tabs-and-more-your-other-computers#w_what-if-im-not-near-my-first-computer
    If you didn't use Sync or can't access your account, someone with access to your old computer could email you your bookmarks. Since there is a range of different ways to do that and the best choice might depend on what you can expect the person you ask to be able to do... could they start up Firefox in your profile and follow menu steps to export a file? Could they drill down into a hidden folder on the system, zip a file, and mail that to you? Etc.

  • I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

    I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

    JungleTaxi Cabbie wrote:
    Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
    Enter your Incoming Mail Server, User Name, and Password using the following settings:
    Incoming Mail Server: mail.me.com
    User Name: Your iCloud email address (excluding @me.com)
    Password: Your password
    Last Modified: Jun 27, 2013
    Maybe you should test these things before calling people out, because these settings do function perfectly well.
    iCloud is not supported on Snow Leopard or lower, why bother to mention it?
    The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
    The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
    JungleTaxi Cabbie wrote:
    Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
    I never said that there was, perhaps you imagined it.

  • You can't use The following message is stopping me access my disk utility.  'this version of the application "Disk Utility" with this version of OS X.'  not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.

    After installing Yosmite, The following message is stopping me accessing my disk utility.  'You can't use this version of the application “Disk Utility” with this version of OS X.' you have “Disk Utility” 12.1.1. 
    not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.
    Help

    For whatever reason you don't have the Yosemite version of Disk Utility which is 13. I suggest you reinstall Yosemite.
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Download and install the 10.10.1 update.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Check that you have the current version of Disk Utility.

  • Maverick cannot be downloaded check internet connection and try again

    I have tried to download OS X Mavericks multiple times. Keeps telling me that the application could not be downloaded....check your internet connection and try again. I have and it's fine. I've restarted my router and desktop twice. no luck. my ISP said everything is fine and nothing they can do. Any suggestions? 

    Try holding the option key and click.

  • Disable Internet Connection on LAN computers on Linksys E2500

    Hi,
    I am new here, and going to setting up my router in my small office.
    I have a Linksys E2500, and going to disable internet connection on computers that connected via LAN cable.
    So, this is how I am going to set my office.
                                                                          Internet
                                                                                 |
                                                                          modem
                                                                                 |
                                                                   Linksys E2500
                                                                    (192.168.1.1)
                              |                                                                                                   |
                       Hub A                                                                                            Hub B
         PC 1                     PC 2                                                                PC 3                        PC 4
    Hub A and Hub B are in different floor.
    Do these Hub A and Hub B still give the same range of IP Address from linksys (192.168.1.x) to the PCs below them, like PC 1 got 192.168.1.2, PC 2 got 192.168.1.3 and go on? Can I reserve an static IP Address to each PCs, and disable internet only on PCs below Hub B (PC 3 and PC 4)? I cannot find any controls for disabling internet connection on LAN interface from the E2500 Setup Interface. There are only Wireless MAC Filtering and no LAN MAC Filtering.
    If this thing sounds stupid, I am sorry but I have no experience in setting network here. I hope someone can help me out.
    Thanks a lot.

    I agree with FurryNutz. You will need an IP-enabled device for the router block it via Parental Controls. If you have wireless bridge or a manageable switch, you can block that and all the devices connected to it should also be blocked from internet access.
    I think you can set Static DNS on the computers under Hub B to 0.0.0.0 which will not allow them to access the internet but are still within the router's local network.

  • Local area network disable internet connection

    Hello,
    i have a strange problem, i explain
    Computer A  win XP   ip 192.168.2.231 with onboard network card
    Computer B  win 98   ip 192.168.2.232 with pci network card
    Router Linksys WRT54GS, with ip 192.168.2.230, but i use it just like a hub because i don't have here internet connection
    both computers connected with cable and all work nice.
    Then i added a wireless/USB Planet because i want to connect it to another router in another building to get internet connection, so i connected this Planet wireless/USB to computer A, all work nice, i get signal internet connection and ip 192.168.1.102
    but ..... and that is the problem, when i connect computer B win local area it disable my internet connection, i try to ping some domain name from computer A, where Planet adaptor is installed, but it try to find this domain name in local area instead to route in internet connection, if i deactivate local area ..... internet connection work like a charm.
    I tried to change several ip groups, all in 192.168.1.x, tried to disable, enable DHCP server in router, tried to change subnet mask, tried to use proxy, to play with router configuration...... nothing it not work.
    So i think something about network onboard conflicts, so i installed a new pci card in computer A, ouffff nothing when i active local network i stop to have internet connection, i tried also to install another USB wireless adaptor and connect it via wireless with router, nothing ... when i active local network i stop to get internet connections
    So the only way to get internet connection is do disable local network oufffff
    any suggestions about ?
    tks
    Max

    No i don't have wireless card in 98 computer, it have only pci network card.
    Windows xp computer have on board network card, local network, and USB Planet adatptor for internet.
    Forgot to say that, both compuers are connected to router1 WRT54GS, i use it just for local area network and printers
    Via wileress USB Planet adaptor  i want to connect to another router WRT54GS located in another building, all work nice, i get internet etc... my problem is local are, when i active it .. internet connection stop to work

  • NETWORK ERROR.  PLEASE CHECK YOUR INTERNET CONNECTION AND TRY AGAIN

    I've been getting this message when I try and play some
    games...Flash 9.0.115 is required to view this content. Your
    current version is 9.0.47. Please download the latest Flash Player.
    But every time and try and download it I get this error
    message NETWORK ERROR. PLEASE CHECK YOUR INTERNET CONNECTION AND
    TRY AGAIN.
    I've tried changing settings but nothings working, can anyone
    please help me

    I SOLVED IT!!!!! LATEST FLASH IS INSTALLED!!!!
    Here's what I did:
    Read the information in the service note about the ridiculously sensitive download manager (DM)
    ID:
    kb400530
    It gives instructions about internet settings necessary for the DM to work on multiple browsers. I use IE 7. Some were really non-obvious, like windows need to have no constraints on size, position.  Most have to do with security, Active X settings.
    However even after I followed the directions, I got the same error message.
    But I'd gotten the general idea of what the DM needed, and went back to my Internet Options, and made a couple of additional changes. I'm not sure which of these was responsible for the success, but I'm resetting them afterward anyway.
    For all the settings in which they allowed Prompt or Enable, I chose ENABLE.
    I set Enable (vs. Prompt) for Download signed Active X controls (not secure)  - this prompts a security risk bar, which didn't interfere
    I also:
    Set ENABLE for Run components not signed with Authenticode
    Set ENABLE for Allow previously unused ActiveX controls to run without prompt
    Set DISABLE for Automatic prompting for ActiveX controls
    Set DISABLE for Automatice Prompting of ActiveX controls
    Set  DISABLE for Use Pop-Up Blocker
    Set ENABLE for everything in under Scripting section
    Anyway, you get the idea.  I was trying to give the poor software every break I could, and it downloaded with no problem.
    And then, the acid test.....I tried the site that had crashed because of lack of Flash 10 - and it tna perfectly....
    Take that ADOBE!!!!
    I hope something equivalent works for you.

  • I want to connect an Airport Express via WiFi to my internet connection and then connect its LAN port to the WAN port of a Time Capsule. Will then any device connected to the time capsule wirelessly be also connected to the internet?

    Background is I can't hook up my time capsule directly to my internet connection via network cable. I tried to extend the network via Wifi, but that did not work. At the moment I have two wireless networks, one with internet connection and another one with my time capsule. So to use time machine I have to change my network all the time.
    Can I buy an Airport Express, use is as a client to my internet connection wifi and provide that connection via network cable to my time capsule and all it's wifi clients?

    The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
    So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
    Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

  • I receive the error, "No Internet Connection" and my Adobe Creative applications are crashing on a regular basis.

    I keep getting the same errors with the damn Creative Cloud application on my Windows 7 machine, which IS connected to a LAN and IS actively connected to the internet at the time the error routinely appears in the midst of tasks.  I have checked root certificates, manually checked my hosts file and run the tests outlined above to both Adobe addresses.
    In fact, the error kept occuring while I was on an over 3-1/2 hour call with a very through and nice representative from Adobe who had remote screen access at the time (through Adobe connect) and could see the error repeatedly occuring!
    Her comment, "This just happens sometimes with this application and there's not a patch for it yet",  The problem I was having with Photoshop CS6 and Photoshop CC was so severe that I had to do a SYSTEM RESTORE which then started  affecting other Adobe applications because Windows had erased part of the programs (or all of some programs) but Adobe's software saw them as still installed, that she had me uninstall ALL Adobe Creative Cloud applications using the Adobe Cleaner Tool and reinstall everyting from SCRATCH. She and I had tried numerous other ways to repair the problems I was having with updates not installing correctly AND constant program freezing, etc. before this taking this extreme step. 
    I'm a professional programmer / software / web designer, so I had tried for hours correct the issues the previous night and had tried once overnight to reach someone in Adobe support only to be told of over an hour wait time by the automation and not offered a callback. 
    Anyway, despite her best assistance this afternoon (and double confirmation that everything tested correctly), it has taken, so far, well over six hours to reinstall only a portion of what I need for my work and on a deadline because the application keeps reporting "No Internet Connection" and I have programs cued to install unattended.  I am now way behind schedule on some design projects which MUST BE COMPLETED by deadline and require Adobe's software to be installed and function correctly.
    Adding to this, Windows Explorer has repeatedly crashed after installing the damn Creative Cloud application and works normally when it's removed and "cleaned" ... and I've seen so many problems with the install system, etc. that I have to wonder what in the hell the company was thinking when this approach was launched?
    I generally have liked -- and indeed loved -- some of Adobe's products in the past, but the recent experience has certainly been costly in time and disappointing. 
    Many other software manufacters integrate suites, perform updates and confirm licenses without such a buggy, time intensive and unreliable process -- including my own company. 
    Aside from complaining at this point, I wish somebody from Adobe would provide alternative install methods and / or a fullproof fix for this bug and some of the other installation bugs many of us experience.  Any thoughts, advice, knowing that not only I -- but also the Adobe Support Staff Person accessing my computer LIVE -- tried the various "fixes"?

    Branching this to a new discussion as the previous discussion was related to the inability to connect and download the installation software.
    Rob it does sound like you are facing some connection and stability difficulties.  Do you manage your network youself?  I am a bit concerned by the fact that you have stated that you periodically loose Internet connection while completing certain tasks.  Does this affect your ability to utilize the already installed Adobe Creative software?
    I would also recommend reviewing your installation logs to determine if any errors occured during the installation process.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  Please feel free to post any specific errors you discover to this discussion thread.

  • I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth

    I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks

    How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
    If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions?

Maybe you are looking for

  • ITunes recognizes iPhone, but doesn't show sync screen-what to do?

    My iphone 3G S is authorized, has the latest software and I am running the latest iTunes as well on my MacBook. When I connect the iPhone, the icon is visible on the left hand side pane in iTunes-under 'devices', but the screen freezes when I select

  • MacBook Pro attempts to power up with the lid shut

    My MacBook Pro attempts to start up with the lid shut. The apple on the lid lights up and I can hear the hard drive attempt to boot up. I have recently had the logic board replaced. I have tried to put the computer to sleep before closing the lid but

  • LR 1.3 Mac not Importing JPGS with RAWs

    I'm trying to import both RAWs and JPEGS at the same time and LR 1.3 is not doing so well. With previous versions I was able to import both a raw file (converting it to DNG in the importing) and bring along the accompanying JPEG (as a sidecar) at the

  • Not sure if JRun has started

    Trying to setup CFMX 7 to run on JRun4 on a MacBook Pro (Intel based). When I try to start CF using a terminal command line: java -jar /Applications/JRun4/lib/jrun.jar -start cfusion I get the following: Starting Macromedia JRun 4.0 (Build 92909), cf

  • Unable to ssh into 2960 switch

    Having trouble being able to SSH into one of our switches. It looks like everything is configured correctly and matches a config of one of the other switches that I can connect into via SSH. I can connect into the config of sw7.txt,(10.15.0.7) but no