Cannot display Adapter Service in Adapter Monitor - XI Runtime Workbench

Dear Experts,
I have already done the system copy XI 3.0 from Win Server 2003 32bit to WIn Server 2003 64bit.
I have also done the post activities in NW AS ABAP system copy and NW AS JAVA system copy.
I have a problem now,
I cannot display the adapter service in SAP XI Runtime Workbench ( http://jktbtr-sap01:50000/rwb/index.jsp )
Tree Domain -> Integration Server  -> Adapter Engine jktbtr-sap01
Button Adapter Monitoring.
In the previous source system I can see all the adapter service : BC, File, JDBC, JMS, JPR, Mail , RFC, SOAP, XI.
But in the target system, I just found JPR with red light.
What configuration should I set to register and start those adapter services in target system?
Regards,
Adhi

can u check whether u are able to see the list of adapters in communication channel. when u select the adapters.
also do the CPACACHE refresh.
chirag

Similar Messages

  • Error while opening Adapter Monitoring in Runtime Workbench

    Hi,
    I am unable to open Adapter Monitoring from
    Runtime Workbench -> Component Monitoring -> Adapter Monitoring
    When I tried to open, I am getting following message in the new window:
    "The page cannot be displayed"
    Please let me know where I can enable this option.
    Thanks,
    Yogi.

    Hi,
    Go thru this SAP Note- 768456,928862
    Also this doc may help u-https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e1ba1a-e86e-2910-ee83-b73b54abc7d4
    Regards,
    Moorthy

  • Cache Monitoring in Runtime Workbench not showing status/throwing error

    Hello Friends,
    The Cache Monitoring in Runtime Workbench is not showing the status at all. Below is the error message that is displayed.
    Connection to system RUNTIME using application RUNTIME lost. Detailed information: Error accessing "https://us-medpiqas.ww005.siemens.net:50001/run/value_mapping_cache/int?method=InvalidateCache" with user "null". Status of response is HTTP/1.1 401 Unauthorized - Unauthorized
    It was working fine few days before. Now the messages are not getting processed as they are not able to access the message mapping at runtime. I am surprised as to how this happened. Can anyone of you tell me what I can do to proceed with the problem?
    FYI: SXI_CACHE in ABAP Stack shows updated status and is green.
    Thanks & Best Regards,
    Anand Patil
    Edited by: Anand Patil on Dec 22, 2010 4:06 PM

    Hi,
    Restarting the XI: CPA Cache Service in https://<host>:<port>/nwa -
    > Systems---->Start & Stop. After restarting the CPA Cache service. The error is no more shown.
    This works!
    Thanks & Regards,
    Anand Patil

  • Messages on Holding at Message Monitoring under Runtime Workbench

    Hello Colleagues,
    we have currently the problem that a lot of messages for some interfaces are in status Holding under Message Monitoring at Runtime Workbench for PI 7.1.
    I'm not able to resend the messages with status Holding as well as change status to cancel.
    Quality of Service for the Interfaces are Exactly Once in Order.
    I assume an error message blocks the queue and due to the fact we have Exactly Once in Order configured all following messages be in status Holding.
    Is my assumption right?
    But, I am not abel to find any messages in status error with blocks the queue!
    How can I solve that issue?
    Many thanks in advance!
    Jochen

    I assume an error message blocks the queue and due to the fact we have Exactly Once in Order
    configured all following messages be in status Holding.
    AE should have least number of EOIO messages at a given instance...otherwise Holding is what you get.....and holding is common with EOIO....so see if you can chagne the QoS of some messages to EO
    But, I am not abel to find any messages in status error with blocks the queue!
    Never you will get an error in SXMB_MONI....or the queue blocked....
    When your message goes out of IE...the corresposding message entry is marked with chequered flag...observe in MONI you will see this....however in AE the message can fail if not able to send to the target system....
    For some more understanding refer my answer in this thread:
    Re: Restarting Error's in SXMB_MONI
    Regards,
    Abhishek.

  • "Error in message monitoring in runtime workbench"

    Hello All,
        I have an error in message monitoring in runtime workbench.
    We have installed PI7.0 and it should run on port 50000.But it is running on port 50100.
    Please suggest what are the steps involved to resolve this problem.
    Thanks and Regards
    SAN
    null
    k san

    San,
    Can you please copy / paste error message.
    Also check if you have set correct port in Exchange profile under Runtimeworkbench.
    Nilesh

  • No "Adapter monitoring" in runtime workbench

    We appear to having difficulties with our SOAP adapter in XI 3.0.
    I have searched through the forum, and most queries relate to SOAP Adapter being greyed out in adapterframework, but it is not even available in the list.
    We do no have the Adapter Monitoring as an option in our runtime workbench, either.  How can we add this?
    Any thoughts gratefully received!

    Hi Barry,
    have you tried: http://server:port/mdt/amtServlet   ?
    this is the address of the adapter monitoring
    the old address ( < sp4 as far as I remember) of the adapter monitor:
    http://hostname:portnumber/AdapterFramework/monitor/monitor.jsp
    regards,
    michal
    Message was edited by: Michal Krawczyk

  • SOAP Adapter + asynchronous message + Runtime Workbench

    Hi
    I have problem with error monitoring in Runtime Workbench -> Message Monitoring
    I have SOAP adapter deployed on Apache Axis.
    I have flow SOAP->XI->SOAP (asynchronous mode)
    It works great until receiver adapter generate error.
    I can see error message in defaultTrace log but in
    Message Monitoring-> Details I see only "SOAP: response message
    contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault".
    SOAP message from receiver adapter (with error) looks like that
    <?xml version="1.0" encoding="UTF-8"?>
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
      <soapenv:Body>
        <soapenv:Fault>
          <faultcode>Client</faultcode>
          <faultstring>Internal Server Error</faultstring>
          <detail>
            <myfaultmessage>
              <type>RABAX_STATE</type>
              <message>Divide by 0 (type 1).</message>
            </myfaultmessage>
            <ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">pslupkowski</ns1:hostname>
          </detail>
        </soapenv:Fault>
      </soapenv:Body>
    </soapenv:Envelope>
    I'm think that this message is not well formated and
    Adapter Engine can't find some tags during parsing this
    message. Any ideas how to solve this problem?
    I'm just want to see error description from <myfaultmessage> tag in Message Monitoring

    Hi,
    Did you check the log on adapter engine?
    http://<host>:<port>/MessagingSystem/monitor/monitor.jsp
    Take a look to this monitor, here you can see both messages (request and response).
    Cheers,
    Ricardo.

  • Mini Display Port to VGA adapter + Monitor Eizo s2231W = CRASH

    I purchased a new macbook pro last month with 2 adapters, one for VGA the other for DVI. I'm having some trouble with the Mini-DVI to VGA adapter. The Mini Display Port to DVI adapter works well.
    When I attach the VGA adapter to the monitor it works well for a couple of minutes, then I dont know why my MBP crashes and I can see a purple or white screen. The crash is really a crash... cauz I cant do anything. My mac is frozen and the only way to resuscitate him is to keep pressed the power button for a while till it turns off, and then turn it on again.
    You can say... why do you need the VGA if the DVI works...
    the problem is that I'm probably supposed to use it one day attached to a projector because of a presentation at university.
    So I dont wanna see my new macbook pro freezing in front of my professor.
    please help.
    EDIT:
    adding some precious information
    My hardware configuration as regard the graphic chipset is
    NVIDIA GeForce 320M
    The resolution of the external monitor is 1620x1080
    I'M NOT using the mirroring ( but the desktop extension)

    I had the exact same problem. It actually escalated from there and it would crash at the startup screen (the white one with the apple and the spinning gear). The only way I was able to fix this was to reformat the entire computer. I was lucky enough to have backed up all my data when it first started crashing. I've only reformatted yesterday and things seem fine for now. I don't know what caused it, or how to fix the problem any other way.

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • Plugging USB from cinema display to dual-link DVI adapter shuts-off adapter

    i have a macbookpro and 30" cinema display. i had been using the $100 minidisplayport-to-duallinkDVI adapter to connect my monitor but now whenever i plug the USB from the monitor into the adapter (to use the monitor as a USB hub) it  kills the power to the monitor! does anyone know what the problem is here? it seems to have gotten worse and worse over time and now i cannot ever get it to work no matter how many times i replug things... causing my studio to be quite disconnected. does anyone have any information on this issue?

    There just so much power that can be delivered to the usb buss.  You probably need a powered usb hub.

  • Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

    Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

    You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
    That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
    Refresh & sesolution are the first things to look at.
    Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
    I forgot to mention another thing, sometimes it's the projector that needs to be tweaked.

  • Can I use the Apple ADC to DVI adapter with a VGA monitor?

    Hey everybody,
    I have a quick question. I work on computers fr friends and family as a hobby. I have an ADC monitor and need ot be able to hook up computers with a VGA port on them to it. Can I use the Apple ADC to DVI adapter along with an Apple DVI to VGA adapter to successfully connect VGA computers to my ADC display? I was assuming this would work and ordered both adapters but now I have made myself nervous about weather or not this will actually work. Has anybody out there successfully done this? Thanks for your help in advance everybody.

    You can't run an ADC display with a VGA computer without a converter. Adapters won't do it.
    a VGA to ADC converter will drive the ADC display directly
    <http://www.gefen.com/kvm/product.jsp?prod_id=1301>
    If you have the Apple DVI to ADC adapter
    <http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
    you could use it with a VGA to DVI converter
    <http://www.gefen.com/kvm/product.jsp?prod_id=1310>
    It might be cheaper to get DVI graphics boards for the computers and use the Apple DVI to ADC adapter.
    <http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
    Your title says "Can I use the Apple ADC to DVI adapter with a VGA monitor?". If you want to connect a VGA monitor to a computer's ADC port you need the ADC to VGA adapter
    <http://www.gefen.com/kvm/product.jsp?prod_id=1299> You can't use an ADC to DVI adapter followed by a DVI to VGA adapter, because the ADC to DVI adapter doesn't pass the analog video signals needed for VGA.

  • I have a imac 2308. where can I find a thunderbolt to VGA adapter to add additional monitors

    I am trying to attempt to add two additional dell monitors (vga) to my EMC2308 imac. I only have one thunderbolt port and have not had luck finding a thunderbolt to vga adapter. Any ideas?

    A notable peculiarity of Thunderbolt is that it uses exactly the same connector as Mini Display Port, and that's not all. The Thunderbolt connector also carries Mini Display Port video signals. That means you can plug a Mini Display Port video cable/adapter in to a Thunderbolt connector and your monitor will work.
    If you plan to do other things with your Thunderbolt connector and don't want it wasted on a monitor, you can also choose an HDMI --> DVI adapter, which for your purposes will be functionally equivalent.
    You can even use both at the same time.
    - Anonymous
    http://x704.net/bbs/viewtopic.php?f=13&t=6134
    http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter

  • Missing Audit Log of Adapter Engine in Message Monitoring

    Hi!
    I've a problem with a fresh installed PI:
    The Adapter Engine doesn't log anything in the Message Monitoring. The Integration Engine logs everything properly, but all entries from the adapter engine are missing. It looks like no message was processed by the AE, but in fact AE is processing the messages properly, only logging fails.
    What can cause this behaviour?
    Best regards,
    Daniel

    Hi Agasthuri,
    yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
    Hi Praveen,
    in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
    I checked the MDT, but there are also no messages displayed.
    End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
    Best regards,
    Daniel

  • HTTP Receiver Adapter: Payload in SXI Monitor

    Hi
    We have a scenario where System A is sending information by HTTP to SAP XI    (No Sender HTTP Adapter required). SAP XI is posting an Idoc in R/3 and sending back two fields to same sender.
    We have defined 2 Receiver determination, one for Idoc and another for response for the same sender. Further also seprate mapping program, Interface mapping and Message interface has been defined for them (No BPM is required).
    When we are running the test,everything goes successful and the incoming messages has two receivers, the Idoc is posted and also a response is send back to the sender system(which becomes receiver now). I can see successful flag for both of them and further the receiving system also is able to receive the response successfully, but I cannot see the response payload in Monitor for HTTP receiver, it shows the incoming payload and transformed Idoc after mapping, but it does not show the response message for HTTP receiver and only shows the incoming payload.
    How can I see the outgoing payload for the same (as HTTP Adapter does not exist on AE) and thus RWB - AE monitoring is not possible. Can someone help me out how to check the outgoing payload for HTTP receiver in Monitor.
    System A --> SAP XI --> SAP R/3 (IDoc)
                             I----
    >  System A (HTTP Receiver)
    BR / Swetank

    Hi
    I am not bothered about Idoc part. The sender is sending supposing 3 fields
    a,b,c. The idoc is posted with those two fields.
    And a message is again send to Sender system (Which now becomes receiver) with two fields only (a,b) that we have received this field A( order number). This is not transport acknowledgement, but a payload which is send back.
    Separate Mappings have been defined for Idoc and HTTP receiver and my query is that I cannot see the outgoing payload in monitor. Even though on verifying with the receiver system, they receive the actual transformed payload.
    So I do I see the outgoing payload in Monitor for HTTP receiver in Monitor ?
    BR / Swetank

Maybe you are looking for