Cannot display archived idoc data records in SARA

Hello,
In our ERP system, we regularly archive idocs older than 6 months. To view these archived idocs I use transaction SARA (with archive object IDOC and infostructure SAP_IDOC_001) to search for the relevant idoc that has been archived. Once the idoc is displayed, I drill down further by clicking the magnify glass button which then displays the idoc levels:
EDIDC               Control record (IDoc)
EDIDD               Data record (IDoc)
EDIDS               Status Record (IDoc)
SRL_ARLNK      SREL: Archive Structure for Links
When I try to view the Data Records, I get a message saying "You are not authorized to display table EDIDD". According to our Authorizations department, this is not an Auth issue but rather config setup or program issue.
Why can't I view the archived idoc data records? Is there another way to view archived idoc data?
Regards,
Fawaaz

Hi Jurgen,
Thanks for moving my post to the correct space.
Our Auth team is very confident that this is not a user auth issue. This could possibly be true because the idoc data resides on the following tables when in the database (before archive) - EDIDC, EDID4 & EDIDS. The idoc could then be viewed via transaction WE02 or the Data Browser (SE16). There is no EDIDD table in our ERP system so obviously no authorization object to assign to.
Once the idoc is archived, the data is removed from the ERP tables and moved to our archive database/server for storage. So when trying to view the archived record, the system does not access the ERP tables but rather the archive directory (that it's mapped to in settings). I assume the SARA transaction merely displays the data in the same segments/grouping with these table names (mentioned above in my first post) but instead of EDID4 it displays EDIDD.
According to the error longtext, "The check performed when data is read from the archive is the same as that of the Data Browser (transaction SE16)". So I was not involved with setting up our archiving procedure but could it be that table EDID4 was incorrectly mapped to table EDIDD in archives?
Regards,
Fawaaz

Similar Messages

Display archived IDOCs in transaction WE10 - click on IDOC number

Hi experts,
If you run transaction WE10 and display IDOCs not archived (from the database), from the list of IDOCs you can click on the IDOC number and then go to the screen that displays the IDOC information (Control, Data and Status records).
However, if you run WE10 with archived IDOCs (Data Source is archive), you get to see the list of IDOCs but when you click on the IDOC number it doesn't go to another screen showing you the IDOC information but it stays on the same screen.
Is this expected behaviour? I have had a looked at the OSS and Internet Search and there is no reference to this behaviour.
Many thanks for your help in advanced.

Hi Jurgen,
Thanks for moving my post to the correct space.
Our Auth team is very confident that this is not a user auth issue. This could possibly be true because the idoc data resides on the following tables when in the database (before archive) - EDIDC, EDID4 & EDIDS. The idoc could then be viewed via transaction WE02 or the Data Browser (SE16). There is no EDIDD table in our ERP system so obviously no authorization object to assign to.
Once the idoc is archived, the data is removed from the ERP tables and moved to our archive database/server for storage. So when trying to view the archived record, the system does not access the ERP tables but rather the archive directory (that it's mapped to in settings). I assume the SARA transaction merely displays the data in the same segments/grouping with these table names (mentioned above in my first post) but instead of EDID4 it displays EDIDD.
According to the error longtext, "The check performed when data is read from the archive is the same as that of the Data Browser (transaction SE16)". So I was not involved with setting up our archiving procedure but could it be that table EDID4 was incorrectly mapped to table EDIDD in archives?
Regards,
Fawaaz

Is there any t code in SAP to display archived shipping data

Hi All
we have a issue with unarchiving shipping doc , our basis team has unzipped the file from the path it was archived and provided display access , when i cross checks in Tcode SARI theya are un zipped and in sap this document is still in status archived i am not able to view vith vt03n
for archived billing documents once thay are unzipped , document will not open in vf03 but we can display in vf07
Please let us know how to view this shipping data in sap ?
Is there any t code in SAP to display archived shipping data (like for archived billing dicuments vf07)
Your kind help would be highly appreciated.
Thank you
Rajendra Prasad

Hello,
Once shipment document is archived then you can't display by VT03N transaction. As you have pointed out SARI or SARE transaction will help in displaying the archived shipment documents from archive server. (you have to select Archiving object = SD_VTTK and Archive Infosturcture = Select from display option).
VF07 - Display archived billing document. We call this transaction VF07 as archived enable transaction.
I have gone through the OSS note 590656 mentioned by Eduardo Hinojosa, with this enanchment of VT03N (respective program) you should be able to display archived shipment document. This Oss note should help you.
let me know if required further clarification on this.
-Thanks,
Ajay
Edited by: Ajay Kumar on Aug 25, 2009 6:16 AM

SM58 - IDoc adapter inbound: IDoc data record table contains no entries

Trying to send Idocs from SAP ECC6.0 via PI 7.0 up until 2 days ago there was no problem.
Since yesterday, only one specific type of Idoc does not make it into XI (PI). In the Idoc monitor (WE02) the idocs that were created gives status 3 which is good. But all Idocs of that specific type (ZRESCR01) does not go to XI. I can only find them bakc in SM58 where it gives the following message:
IDoc adapter inbound: IDoc data record table contains no entries
I have checked SAP notes 1157385 and also 940313, none of them gives me any more insight into this error. I have also checked all the configuration in WE20, SM59, and in XI (repository and directory) and in XI IDX1, IDX2 but could not find anything that would cause this. I can also not think of anything that changed since 2 days ago.
Please point me in the right direction.

hi,
i think in sm 58 u can find entries only when there is some failure in login credential .
if there is change in IDoc structure than you have to reimport the idoc metadata defination at IDX2.otherwise not requird.
please check the logical system name pointing to the your requird target system....
please also verify thet your port should not be blocked.
pls find the link it may help
Monitoring the IDOC Adapter in XI/PI using IDX5
regards,
navneet

ORA-00308: cannot open archived log '+DATA'

Hello all,
I created new physical standby but I facing problem with shipping archived file between primary and standby.
Primary : RAC (4 nodes)
Standby : single node with ASM
when I run :
alter database recover managed standby database disconnect from session;
in alert log file :
Managed Standby Recovery not using Real Time Apply
Parallel Media Recovery started with 24 slaves
Waiting for all non-current ORLs to be archived...
All non-current ORLs have been archived.
Media Recovery Waiting for thread 1 sequence 25738
Tue Mar 03 12:21:13 2015
Completed: alter database recover managed standby database disconnect from session
and when i checked archived files by
select max(sequence#) from v$archivanded_log;
It was null.
I understand thatno shipping between primary and standby till this point i deiced to use manual recovery by :
alter database recover automatic standby database;
But i get this error in alert log file :
alter database recover automatic standby database
Media Recovery Start
started logmerger process
Tue Mar 03 12:38:38 2015
Managed Standby Recovery not using Real Time Apply
Parallel Media Recovery started with 24 slaves
Media Recovery Log +DATA
Errors with log +DATA
Errors in file /u01/app/oracle/diag/rdbms/oracledrs/oracledrs/trace/oracledrs_pr00_4989.trc:
ORA-00308: cannot open archived log '+DATA'
ORA-17503: ksfdopn:2 Failed to open file +DATA
ORA-15045: ASM file name '+DATA' is not in reference form
ORA-279 signalled during: alter database recover automatic standby database..
when i opened oracledrs_pr00_4989.trc: file i find :
*** 2015-03-03 12:38:39.478
Media Recovery add redo thread 4
ORA-00308: cannot open archived log '+DATA'
ORA-17503: ksfdopn:2 Failed to open file +DATA
ORA-15045: ASM file name '+DATA' is not in reference form
When I created i set these parameter in duplicate command:
set db_file_name_convert='+ASM_ORADATA/oracle','+DATA/oracledrs'
set log_file_name_convert='+ASM_ARCHIVE/oracle','+DATA/oracledrs','+ASM_ORADATA/oracle','+DATA/oracledrs'
set control_files='+DATA'
set db_create_file_dest='+DATA'
set db_recovery_file_dest='+DATA'
What please the mistake here
Thanks in advance,

Yes I have datafiles under +DATA
ASMCMD> cd +DATA/ORACLEDRS/DATAFILE
ASMCMD> ls
ASD.282.873258045
CATALOG.288.873258217
DEVTS.283.873258091
EXAMPLE.281.873258043
FEED.260.873227069
FEED.279.873257713
INDX.272.873251345
INDX.273.873252239
INDX.278.873257337
SYSAUX.262.873227071
SYSTEM.277.873256531
SYSTEM_2.280.873257849
TB_WEBSITE.284.873258135
TB_WEBSITE.285.873258135
TB_WEBSITE.286.873258181
TB_WEBSITE.287.873258183
UNDOTBS1.275.873253421
UNDOTBS2.276.873255247
UNDOTBS3.261.873227069
UNDOTBS4.271.873245967
USERS.263.873227071
USERS.264.873235507
USERS.265.873235893
USERS.266.873237079
USERS.267.873238225
USERS.268.873243661
USERS.269.873244307
USERS.270.873244931
USERS.274.873252585
asd01.dbf
catalog01
dev01.dbf
example.dbf
feed01.dbf
feed02.dbf
indx01.dbf
indx02.dbf
indx03.dbf
sysaux01.dbf
system01.dbf
system02.dbf
undotbs01.dbf
undotbs02.dbf
undotbs03.dbf
undotbs04.dbf
user1.dbf
users01.dbf
users02.dbf
users03.dbf
users04.dbf
users05.dbf
users06.dbf
users07.dbf
users08.dbf
website01.dbf
website02.dbf
website03.dbf
website04.dbf
ASMCMD>
Standby :
[root@oracledrs ~]# id oracle
uid=54321(oracle) gid=54321(oinstall) groups=54321(oinstall),54322(dba)
Primary :
[root@dbn-prod-1 disks]# id oracle
uid=54321(oracle) gid=54321(oinstall) groups=54321(oinstall),54322(dba)
1- yes i have needed archived files at my primary
2- select inst_id,thread#,group# from gv$log;
Primary :
INST_ID,THREAD#,GROUP#
1,1,1
1,1,2
1,2,3
1,2,4
1,3,5
1,3,6
1,4,7
1,4,8
1,1,9
1,2,10
1,3,11
1,4,12
3,1,1
3,1,2
3,2,3
3,2,4
3,3,5
3,3,6
3,4,7
3,4,8
3,1,9
3,2,10
3,3,11
3,4,12
2,1,1
2,1,2
2,2,3
2,2,4
2,3,5
2,3,6
2,4,7
2,4,8
2,1,9
2,2,10
2,3,11
2,4,12
4,1,1
4,1,2
4,2,3
4,2,4
4,3,5
4,3,6
4,4,7
4,4,8
4,1,9
4,2,10
4,3,11
4,4,12
Standby :
INST_ID,THREAD#,GROUP#
1,1,9
1,1,2
1,1,1
1,2,3
1,2,4
1,2,10
1,3,5
1,3,6
1,3,11
1,4,12
1,4,7
1,4,8
3- That's sample from alert log since i started the standby (for standby and primary)
Standby :
alter database mount standby database
NOTE: Loaded library: /opt/oracle/extapi/64/asm/orcl/1/libasm.so
NOTE: Loaded library: System
SUCCESS: diskgroup DATA was mounted
ERROR: failed to establish dependency between database oracledrs and diskgroup resource ora.DATA.dg
ARCH: STARTING ARCH PROCESSES
Tue Mar 03 18:38:16 2015
ARC0 started with pid=128, OS id=4461
ARC0: Archival started
ARCH: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Tue Mar 03 18:38:17 2015
Successful mount of redo thread 1, with mount id 1746490068
Physical Standby Database mounted.
Lost write protection disabled
Tue Mar 03 18:38:17 2015
ARC1 started with pid=129, OS id=4464
Tue Mar 03 18:38:17 2015
ARC2 started with pid=130, OS id=4466
Tue Mar 03 18:38:17 2015
ARC3 started with pid=131, OS id=4468
Tue Mar 03 18:38:17 2015
ARC4 started with pid=132, OS id=4470
Tue Mar 03 18:38:17 2015
ARC5 started with pid=133, OS id=4472
Tue Mar 03 18:38:17 2015
ARC6 started with pid=134, OS id=4474
Tue Mar 03 18:38:17 2015
ARC7 started with pid=135, OS id=4476
Completed: alter database mount standby database
Tue Mar 03 18:38:17 2015
ARC8 started with pid=136, OS id=4478
Tue Mar 03 18:38:17 2015
ARC9 started with pid=137, OS id=4480
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC8: Becoming the 'no FAL' ARCH
ARC2: Becoming the heartbeat ARCH
ARC2: Becoming the active heartbeat ARCH
Tue Mar 03 18:38:18 2015
Starting Data Guard Broker (DMON)
ARC9: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Tue Mar 03 18:38:23 2015
INSV started with pid=141, OS id=4494
Tue Mar 03 18:39:11 2015
alter database recover managed standby database disconnect from session
Attempt to start background Managed Standby Recovery process (oracledrs)
Tue Mar 03 18:39:11 2015
MRP0 started with pid=142, OS id=4498
MRP0: Background Managed Standby Recovery process started (oracledrs)
started logmerger process
Tue Mar 03 18:39:16 2015
Managed Standby Recovery not using Real Time Apply
Parallel Media Recovery started with 24 slaves
Waiting for all non-current ORLs to be archived...
All non-current ORLs have been archived.
Media Recovery Waiting for thread 1 sequence 25738
Completed: alter database recover managed standby database disconnect from session
Tue Mar 03 18:41:17 2015
WARN: ARCH: Terminating pid 4476 hung on an I/O operation
Killing 1 processes with pids 4476 (Process by index) in order to remove hung processes. Requested by OS process 4224
ARCH: Detected ARCH process failure
Tue Mar 03 18:45:17 2015
ARC2: STARTING ARCH PROCESSES
Tue Mar 03 18:45:17 2015
ARC7 started with pid=127, OS id=4586
Tue Mar 03 18:45:18 2015
Fatal NI connect error 12170.
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.4.0 - Production
        Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
Time: 03-MAR-2015 18:45:18
Tracing not turned on.
Tns error struct:
    ns main err code: 12535
TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
TNS-00505: Operation timed out
    nt secondary err code: 0
    nt OS err code: 0
Client address: <unknown>
ARC7: Archival started
ARC2: STARTING ARCH PROCESSES COMPLETE
Tue Mar 03 18:47:14 2015
alter database recover managed standby database cancel
Tue Mar 03 18:48:18 2015
Fatal NI connect error 12170.
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.4.0 - Production
        Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
Time: 03-MAR-2015 18:48:18
Tracing not turned on.
Tns error struct:
    ns main err code: 12535
TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
TNS-00505: Operation timed out
    nt secondary err code: 0
    nt OS err code: 0
Client address: <unknown>
Tue Mar 03 18:51:18 2015
Fatal NI connect error 12170.
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.4.0 - Production
        Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
Time: 03-MAR-2015 18:51:18
Tracing not turned on.
Tns error struct:
    ns main err code: 12535
TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
TNS-00505: Operation timed out
    nt secondary err code: 0
    nt OS err code: 0
Client address: <unknown>
Error 12170 received logging on to the standby
FAL[client, USER]: Error 12170 connecting to oracle for fetching gap sequence
MRP0: Background Media Recovery cancelled with status 16037
Errors in file /u01/app/oracle/diag/rdbms/oracledrs/oracledrs/trace/oracledrs_pr00_4500.trc:
ORA-16037: user requested cancel of managed recovery operation
Recovery interrupted!
Tue Mar 03 18:51:18 2015
MRP0: Background Media Recovery process shutdown (oracledrs)
Tue Mar 03 18:51:19 2015
Managed Standby Recovery Canceled (oracledrs)
Completed: alter database recover managed standby database cancel
Tue Mar 03 18:51:56 2015
alter database recover automatic standby database
Media Recovery Start
started logmerger process
Tue Mar 03 18:51:56 2015
Managed Standby Recovery not using Real Time Apply
Parallel Media Recovery started with 24 slaves
Media Recovery Log +DATA
Errors with log +DATA
Errors in file /u01/app/oracle/diag/rdbms/oracledrs/oracledrs/trace/oracledrs_pr00_4617.trc:
ORA-00308: cannot open archived log '+DATA'
ORA-17503: ksfdopn:2 Failed to open file +DATA
ORA-15045: ASM file name '+DATA' is not in reference form
ORA-279 signalled during: alter database recover automatic standby database...
Tue Mar 03 18:53:06 2015
db_recovery_file_dest_size of 512000 MB is 0.13% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Primary :
Tue Mar 03 17:13:43 2015
Thread 1 advanced to log sequence 26005 (LGWR switch)
Current log# 1 seq# 26005 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 17:13:44 2015
Archived Log entry 87387 added for thread 1 sequence 26004 ID 0x66aa5a0d dest 1:
Tue Mar 03 18:00:18 2015
Thread 1 advanced to log sequence 26006 (LGWR switch)
Current log# 2 seq# 26006 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Tue Mar 03 18:00:18 2015
Archived Log entry 87392 added for thread 1 sequence 26005 ID 0x66aa5a0d dest 1:
Tue Mar 03 18:55:33 2015
Thread 1 advanced to log sequence 26007 (LGWR switch)
Current log# 9 seq# 26007 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26007 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Tue Mar 03 18:55:33 2015
Archived Log entry 87395 added for thread 1 sequence 26006 ID 0x66aa5a0d dest 1:
Tue Mar 03 19:14:22 2015
Dumping diagnostic data in directory=[cdmp_20150303191422], requested by (instance=4, osid=10234), summary=[incident=1692472].
Dumping diagnostic data in directory=[cdmp_20150303191425], requested by (instance=4, osid=10234), summary=[incident=1692473].
Tue Mar 03 20:00:06 2015
Thread 1 advanced to log sequence 26008 (LGWR switch)
Current log# 1 seq# 26008 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 20:00:07 2015
Archived Log entry 87401 added for thread 1 sequence 26007 ID 0x66aa5a0d dest 1:
Tue Mar 03 21:00:02 2015
Thread 1 advanced to log sequence 26009 (LGWR switch)
Current log# 2 seq# 26009 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Tue Mar 03 21:00:03 2015
Archived Log entry 87403 added for thread 1 sequence 26008 ID 0x66aa5a0d dest 1:
Thread 1 advanced to log sequence 26010 (LGWR switch)
Current log# 9 seq# 26010 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26010 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Tue Mar 03 21:00:06 2015
Archived Log entry 87404 added for thread 1 sequence 26009 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:00:00 2015
Setting Resource Manager plan SCHEDULER[0x32DA]:DEFAULT_MAINTENANCE_PLAN via scheduler window
Setting Resource Manager plan DEFAULT_MAINTENANCE_PLAN via parameter
Tue Mar 03 22:00:00 2015
Starting background process VKRM
Tue Mar 03 22:00:00 2015
VKRM started with pid=184, OS id=4838
Tue Mar 03 22:00:07 2015
Begin automatic SQL Tuning Advisor run for special tuning task "SYS_AUTO_SQL_TUNING_TASK"
Tue Mar 03 22:00:25 2015
Thread 1 advanced to log sequence 26011 (LGWR switch)
Current log# 1 seq# 26011 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 22:00:26 2015
Archived Log entry 87408 added for thread 1 sequence 26010 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:00:58 2015
Thread 1 advanced to log sequence 26012 (LGWR switch)
Current log# 2 seq# 26012 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Tue Mar 03 22:01:00 2015
Archived Log entry 87412 added for thread 1 sequence 26011 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:02:37 2015
Thread 1 cannot allocate new log, sequence 26013
Checkpoint not complete
Current log# 2 seq# 26012 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Thread 1 advanced to log sequence 26013 (LGWR switch)
Current log# 9 seq# 26013 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26013 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Tue Mar 03 22:02:41 2015
Archived Log entry 87415 added for thread 1 sequence 26012 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:03:26 2015
Thread 1 cannot allocate new log, sequence 26014
Checkpoint not complete
Current log# 9 seq# 26013 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26013 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Thread 1 advanced to log sequence 26014 (LGWR switch)
Current log# 1 seq# 26014 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 22:03:29 2015
Archived Log entry 87416 added for thread 1 sequence 26013 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:05:50 2015
Thread 1 cannot allocate new log, sequence 26015
Checkpoint not complete
Current log# 1 seq# 26014 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 22:05:52 2015
End automatic SQL Tuning Advisor run for special tuning task "SYS_AUTO_SQL_TUNING_TASK"
Thread 1 advanced to log sequence 26015 (LGWR switch)
Current log# 2 seq# 26015 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Tue Mar 03 22:05:54 2015
Archived Log entry 87418 added for thread 1 sequence 26014 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:07:29 2015
Thread 1 cannot allocate new log, sequence 26016
Checkpoint not complete
Current log# 2 seq# 26015 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Thread 1 advanced to log sequence 26016 (LGWR switch)
Current log# 9 seq# 26016 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26016 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Tue Mar 03 22:07:33 2015
Archived Log entry 87421 added for thread 1 sequence 26015 ID 0x66aa5a0d dest 1:
Thread 1 cannot allocate new log, sequence 26017
Checkpoint not complete
Current log# 9 seq# 26016 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26016 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Thread 1 advanced to log sequence 26017 (LGWR switch)
Current log# 1 seq# 26017 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 22:07:39 2015
Archived Log entry 87422 added for thread 1 sequence 26016 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:16:36 2015
Thread 1 advanced to log sequence 26018 (LGWR switch)
Current log# 2 seq# 26018 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Tue Mar 03 22:16:37 2015
Archived Log entry 87424 added for thread 1 sequence 26017 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:30:06 2015
Thread 1 advanced to log sequence 26019 (LGWR switch)
Current log# 9 seq# 26019 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26019 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Tue Mar 03 22:30:07 2015
Archived Log entry 87427 added for thread 1 sequence 26018 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:30:18 2015
Thread 1 advanced to log sequence 26020 (LGWR switch)
Current log# 1 seq# 26020 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 22:30:19 2015
Archived Log entry 87428 added for thread 1 sequence 26019 ID 0x66aa5a0d dest 1:
Tue Mar 03 23:07:27 2015
Dumping diagnostic data in directory=[cdmp_20150303230727], requested by (instance=4, osid=25140), summary=[incident=1692496].
Dumping diagnostic data in directory=[cdmp_20150303230730], requested by (instance=4, osid=25140), summary=[incident=1692497].
Thanks in advance sir ,

Cannot display table's data from an Excel File

Hi everyone,
I have uploaded my excel table to ODI but now i got an error message on a window that whenever I try to see the info and it says more o less the following:
Oracle Data Integrator Error
Cannot display table's data.
java.sql.SOLException: [Microsoft][ODBC Excel Driver) The Microsoft Jet database engine cannot open the tile '(unknow)', It is already opened exclusively by another user, or you need permission to view its data.
Has any one faced this issue before?
I assume that it is something with the ODBC, but as far as I know it was all right.
I would really appreacite any ideas on how to solve this issue.
Best regards.
J

Something is reading your file, have you got it open in Excel?
I've had similar issues reading Excel via ODBC with OBIEE - once a process opens it you might find you need to kill whatever it was and restart it.
So its either you or the ODI Agent / Console , try restarting it if its not you.

IDOC Data record is appending with NULL characters instead of spaces.

Hi Gurus,
1) We have created a port with Japanese characters for MATMAS05 (IDOC type) and trying to download an IDOC into an XML file using the ADAPTER, the actual data is less than the length of the IDOC string so we need to append the remaining spaces to each data record which in turn fills the segment pad but whereas in NON-UNICODE server the data record is appending with NULL characters instead of spaces.
2) For Japanese port the receiver port name in XML file is appearing with some junk characters in NON-UNICODE client, whereas in UNICODE client it is displaying the correct port name with Japanese characters.
Your help will be appreciated.
Thanks in Advance.

ORA-06512 indicates a numeric or value-error line 2 seems to show to the first statement.
Check the datatypes of your columns/items.
Try to issue an update manually in SQL*Plus to see if it works generally.

Idoc data record not in XI

Hi,
   When you import an Idoc (any Idoc - in my case it is SOPGEN01) in Repository, data record fields of idoc are not imported. You can see these fields in WE60 by checking the "Data rec" checkbox. The fields i need are SEGNUM, PSGNUM, HLEVEL.
<b> Do not confuse the above fields with the EDI_DC40 fields. I do not need EDI_DC40.</b>
I searched SAP notes but could not find anything. Is this a limitation of XI, then its pretty bad.
This same question was asked in May but no concrete answer was given.
data record fields of idoc not found in XI

Instead of going the hard way RFC loopups and mappings - i am thinking of a workaround for this limitation of XI.
You know the number of child segments. In my case it is always 2. And i always need segment number of the parent segment(in this case E1LIPM0)
-E1LIPM0                  segnum 1
    ---E1LIPV0              segnum 2
           ---E1LIPP0       segnum 3
-E1LIPM0                  segnum 4    and so on
So I will use a counter variable starting with 1 and increment it by 3 for each top parent level segemnt E1LIPM0, so i get numbers like 1, 4, 7, 10, etc. which is what i want.
Points awarded to Sushil

IDOC - Data record

Would some one explain me in what situation we will be having more than one Data Records in an IDOC? I am looking for a specific example if possible.
Also, when we send PO to our Suppliers, if there are more than One PO for that supplier, whether I can send all of them in one IDOC?
Please help me.

Hi Mohan,
There can be more then one DATA record if you send multiple line items or multiple objects.
For example if you send multiple delivery items or sales order items then few data segments will be multiple.
It basically depends on what you are sending.
The control records will always be 1. WHich indicates who is the sender, the reciever, the idoc number and control related information.
Data records will be one or more then one depending on what you are sending if you r sending multiple PO's for a single vendor or if u r sending multiple Deliveries for one acknowledgemtn then you will have multiple data records.
There will also be more then one Status records. The IDOC passes through different stages or different milestone and each milestone will have a specific status indicator. So the status records can be more then one.
Hope this helps
Cheers
VJ

IDOC Data Records

I have the IDOC Number with me. How to fetch the Data Records from that ?

If you want to read the idoc records in your program:
use the folloing fms:
Sample code:
CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_READ'
    EXPORTING
      document_number = p_docnum
    IMPORTING
      idoc_control    = f_idoc_control
    EXCEPTIONS
      OTHERS          = 01.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
            RAISING error_opening_idoc.
ENDIF.
* Read IDOC data segments
CALL FUNCTION 'EDI_SEGMENTS_GET_ALL'
    EXPORTING
      document_number = p_docnum
    TABLES
      idoc_containers = t_idoc_data
    EXCEPTIONS
      OTHERS          = 01.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
            RAISING error_reading_idoc.
ENDIF.
* Close IDOC
CALL FUNCTION 'EDI_DOCUMENT_CLOSE_READ'
    EXPORTING
      document_number = p_docnum
    IMPORTING
      idoc_control    = f_idoc_control
    EXCEPTIONS
      OTHERS          = 01.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
            RAISING error_closing_idoc.
ENDIF.

Display archived citadel data mixed with "live" Lookout machine data using Hypertrend object?

Maybe a new feature request item?
It would be really nice if you could use a Hypertrend object in Lookout to plot historical data from an archived Citadel database. So this would be a feature where you could connect an additional (or many) additional databases as machine processes in (read only mode of course). This would allow mixing display objects (trends) of running processes along with display objects (trends) of archived "processes" in the same Hypertrend display when using Hypertrend in the historical mode.
The Lookout Hypertrend object is awesome and it is about time you folks gave Lookout some attention again to exploit its power and coolness.
Thanks and Happy New Year!!

The hypertrend use Citadel service to transfer the data between computer, while the live data is different, so your problem is probably in networking setting or firewall.
If you have firewall on either computer, follow these KBs.
http://digital.ni.com/public.nsf/allkb/0D7B86F4B4D19A5E86256F9A006EECB1?OpenDocument
http://digital.ni.com/public.nsf/websearch/8AE45BBFA1D7025E862570F200642FD8?OpenDocument
Lookout client software doesn't install MAX.exe, but if you have MAX.exe on the client computer, you can use MAX to check the connection. In MAX, try to view the remote trace.
You can also use the NI Hypertrend ActiveX object to check the connection. Create a client process with just a NI Hypertrend ActiveX object. Move it to client computer. Edit its properties and add a trace, then try to view the remote trace. See the attached screenshot. If the Citadel communication has problem, you will not see the database or the trace.
The ActiveX object doesn't fix the problem, but can tell you whether the remote connection is good or not.
Message Edited by Ryan.S on 11-14-2008 03:49 AM
Ryan Shi
National Instruments
Attachments:
1.JPG ‏71 KB

Idoc data record updating which tables ???

Hi,
I want to check Idoc posted in SAP , is updating which database tables ?
Could any one please help me ?
Idoc Basic type : RESAPS_SAVEMULTIPLE03
Message type : RESAPS_SAVEMULTIPLE
Thanks.

Hello,
If it is an inbound Idoc read on
For me the correct place to check which DB tables are being updated by the I/B idoc is the processing func. module which is associated with the process code.
Check in SDN for details on Process Codes & Processing func. modules.
BR,
Suhas

Some question on IDOC (Control Record/Data Record/Status Record)

Dear all,
I am new in this area, and would like to enquire some question on this topic.
When I view a IDOC via WE02, each of the IDOC record will consist of Control Record/Data Record/Status Record).
Questions:
I notice that the data records consists of many segment (i.e. E1EDK01, etc) which are use to store application data.
1 - My question is do I have to manually create all these segment and do a mapping to my application field one by one (i.e. that is when I want to create a brand new message type from scratch)?
2 - If question no. 1 is Yes, how to do it, what are the transaction code to create it? can you show me the step by step.
3 - I don't have to create the Control record and the status record for my new message type right ? because those field value will automatically pull out from partner profile and system status message, am I correct?
Thanks.
Tuff

Hi Tuff,
As everything in SAP, with IDOCs too there are
1) Standard IDOCs
2) Standard IDOCs(Extending - Enhancement to an IDOC, to accomodate for custom values)
3) Custom IDOCs
And every IDOC has,
Control record - EDIDC Structure - This mostly reflects the partner profile information, along with few more details which are used for IDOC extension, Sequencing etc
Data Records - EDID4 Structure - These records contain the actual business data of the document in concern. So for ORDERS05 it would contain order details, INVOIC02 - Invoice details so on...
Status Records - These records capture the status of an IDOC from the time it is received/sent from your system and a corresponding business document is created/changed. So this will have messages like "IDOC sent to the port OK" etc which are status from the communication layer(ALE) to application specific messages like "Sales Order XXX created" or "Invalid Material" etc.
You would have noticed something called as Process code in the partner profile, this is associated with a FM(or work flow task etc) which has the business logic coded in.
So in case of an Inbound IDOC, the sending system updates the IDOC - Control and Data records, and sends it to the receiving system. On the receiving system the IDOC's control record is validated against the partner profiles set, if an entry is found then using the process code it finds the associated FM which will decode the data from the IDOC data records as per the IDOC type and then use it to post data into SAP (VIA BDC, Batch Input, BAPI etc).
And all this while the Status records are being updated accordingly.
So with the above context will try to answer your questions,
1 - My question is do I have to manually create all these segment and do a mapping to my application field one by one (i.e. that is when I want to create a brand new message type from scratch)?
In case of a custom IDOC, yes you will have to.
In case of a standard IDOC, you wouldn't have you just have set up the necessary configuration (Partner Profile, Process code etc)
In case of a standard IDOC extended to accommodate for some custom values(for which there are no fields in standard IDOC - Let us say you have added some new fields on VA01) - In this case you can still use the standard Process code and Standard FM associated with it, SAP provides several Function exits in these FM's which you can leverage to add your custom logic.
2 - If question no. 1 is Yes, how to do it, what are the transaction code to create it? can you show me the step by step.
There are several documents available on the net and on SDN detailing step by step approach for all the above three cases,
just search for step by step guide for IDOCS - sap.
3 - I don't have to create the Control record and the status record for my new message type right ? because those field value will automatically pull out from partner profile and system status message, am I correct?
Again it depends, in case of using a standard IDOC you wouldn't have to. But in case you have some customizations/enhancements then you might have to.
For Ex: updating the control record accordingly for indicating that you have extended the standard IDOC. Or append custom messages to the status record as per the business logic.
Try out the examples you find on the net and post any specific questions you might have.
Regards,
Chen

Time Stamp Error: Cannot display system date and time. My VI display "YYYY-MM-DD" instead of "2014-08-02".

Hi All,
I am using Labview8.5 and Windows XP OS.
My Problem is my Labview TimeStamp cannot display current system date and time.
Please see my attachment for the screentshot.
The TimeStamp or ever Format Date/Time String display "YYYY-MM-DD" instead of "2014-08-02".
I tried other computer machine and it works. There are some computer machine has this problem.
How can I resolve this issue? Please advice. Thanks.
Best Thanks,
Jessie
Attachments:
Time Stamp error.JPG ‏68 KB

Bill,
reviewing the thread Dennis linked (thanks for that) reveals that it is the same account which opened this thread here three month later.
What bothers me is the fact, that the past thread is marked "solved" even though it obviously isn't. Or the OP is trolling us.....
Nevertheless, it seems like systematic error. Connected to specific machines.
What makes the machines where the time stamp issue occurs "unique"? If there are several, is that source really "unique"?
Most obvious reasons would be:
- Language settings (possibly the infamous "dot-comma-issue")
- Time zone settings (e.g. what happens if you switch Ulaanbaatar to Perth or maybe even some US time zone?)
- Missing hotfixes for Win and LV
- Is the system running as virtual machine vs. "native"?
Not so obvious differences:
- Specific CPU type
- Motherboard/BIOS
- LV ini settings
There are tons of other possible reasons (e.g. corrupt LV installation), but these are the ones i came up with within a couple of minutes....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

ABAP Report for IDOC data of perticular IDOC basic type

Hi,
I have requirment to create report to display the IDOC Data of the perticular IDOC type.
However I believe in IDOC the data comes in raw format.
Is there any standard TCODE wherein we can have IDOC data of perticular IDOC type.
or Could you please let me know how is it possible to retrieve data from IDOC using SAP ABAP .
Thanks
Vinay
Moderator message: (almost) duplicate post locked.
Edited by: Thomas Zloch on May 2, 2011 12:39 PM

Hi,
Please find a sample code
* Build Control records
CONTROL_RECORD_OUT-MESTYP = MESTYP.
CONTROL_RECORD_OUT-IDOCTP = IDOC_TYPE.
CONTROL_RECORD_OUT-RCVPRT = 'LS'.   " << Fill the receiver port type US/LS
CONTROL_RECORD_OUT-RCVPRN = LOGSYS.
* Build Data records
*--- EDIDD40 data Here if you have multiple items then make a loop
loop at i_itab.                   " i_itab contains the details about EDIDD40 fields
IT_EDIDD-SEGNAM = SEGMENT.   " Will be EDIDD40
IT_EDIDD-SDATA = i_itab.
*--- Append the data
APPEND IT_EDIDD.
endloop.
aRs

Cannot display archived idoc data records in SARA

Similar Messages

Maybe you are looking for