Cannot display file list of Clip Art CDs containing EPS file

I have purchased many years ago a collection of 50 CDs of Clip Art.
Most of the CDs contain EPS files, some contain JPEG pictures.
I have tried to browse the CDs and can no longer use them on any of my computers running the latest version of the OS. When I enter a CD containing the EPS files, the folders are displayed in the finder, but when I open the folders actually containing the clipart files, the list of files is displayed for one second, and then the filelist is purged and states that there is 0 files in each subfolder.
When I enter a CD containing JPEG pictures, the CD is fully operational and the pictures can be retrieved.
I have an ancient computer running 10.6. All the CDs work quite nominally.
What should I do with my computers running 10.8?

Hi Steve
Many thanks for that. Could I ask that
this kind of thing goes in the release
readme also.
Marc

Similar Messages

Web.show_document cannot display file with Chinese char in IIS 6

Dear all,
There is a problem that web.show_document cannot display file with Chinese char in IIS 6, but works fine in IIS 5.
Is it a server problem or is there any setting in server? Do you know how to solve it?
Big Thanks
JY

Hi,
As Francois mentioned, this issue has nothing to do with forms / web.show_document. web.show_document, just opens the URL specified as parameter. So, if you run the URL (that you've passed as argument for web.show_document), directly in the browser, you would be getting the same issue.
So, as you said, if it works fine in IIS 5 and does not in IIS 6, it would be an issue with the IIS and not forms. You might want to check out the IIS 6 release notes / documentation for any known issues / raise an issue in that.
-Arun

Error: Cannot display file. The file contains 0 bytes

Hi,
I am getting the below error when accessing a a document using Autovue from Documentum:
"Error: Cannot display file. The file contains 0 bytes"
Please note, autovue server is up and running and I get the below when accessing: http://WebserverName:7002/VueServlet/servlet/VueServlet
Oracle AutoVue
VueServlet for AutoVue 20.2.2 Build: 8633 (2013-08-21)
Servlet tunneling to server[0] (IP=xxx.xxx.xxx.xxx)
Connection state: OK
AutoVue server is up and running.
Build: 8633 (2013-08-21)
Server Load:
Server: farm-server[0] (xxx.xxx.xxx.xxx:xxx) Processors: 2
I hope to hear from someone soon!
Cheers

That means that you documentum integration is not working properly
you will need to debug the integration you are using and attach logs for the server, integration servlet (VueLink for documentum, which version?)
Please review the KB, there are items associated with it
Oracle AutoVue VueLink for Documentum Troubleshooting Center(Doc ID 1348153.1)

Cannot display iCloud address list on Outlook2010

My Outlook is working OK to insert e-mail address from the iCloud address list, and I was able to display the iCloud address list till yesterday.
Yesterday, I did some cleanup on my PC, but now , I cannot DISPLAY iCloudAddress List, even though outlook is still able to insert e-mail addresses from the iCloud address list.
I checked the iCloud Add-in, it is ENABLED.
Thus, need help with iCloud/ OUTLOOK:
1) To Display iCloud Address list (in order to look at properties/telephones for any contact)
2) How to syncronize local address list with iCloud Address List (some how iCloud managed to hi-jack all my contacts few months back when I enabled iCloud on my PC, I wish they only copied to iCloud)
Thanks.......Rabrakha

Unlike a computer, https://www.icloud.com isn't accessible from any iPad browser AFAIK and that's almost certainly by design. If you have iCloud set up properly, everything you do on the iPad is already syncing (mail, contacts, Pages, Photo Stream, etc.).
You can also make any adjustments to your iCloud settings on the iPad. Settings > iCloud...
So there doesn't seem to be a need to access iCloud via Safari (or any web browser) from the iPad.
Others may figure out a work-around, but I'm not sure what it would accomplish.
I can see the need on a computer...particularly if you don't have yours with you and you want to access your mail or contacts...but it seems redundant to do it on the iPad.
Was there a reason you needed to have access with Safari?

Embedded clip art

I want to create a button on a form that looks like a human eye.
I can’t seem to find a wingding of an eye, so I want to display a piece of clip art on the form button.
I’ve seen examples on line like:
This->button1->Image = Image::FromHbitmap(IntPtr hbitmap);
This->button1->Image = Image::FromFile(“path/eye.bmp”);
And I’ve seen references like:
HBITMAP hBMP = (HBITMAP) LoadImage( NULL, "Your/ImagePath/a.bmp", IMAGE_BITMAP, 0, 0, LR_LOADFROMFILE);
I don’t want the program to require the bmp file on disk when it runs.
Is there a way to convert the bmp file into some sort of binary bitmap stream and then embed that stream in my source code instead of referencing the file itself in the code?

Images can be embedded into resource file having .resx extension. Check if your project already contains such a file in Solution Explorer, otherwise add one using Add New Item command. Then double-click the .resx file in Solution Explorer. Then you
should be able to insert existing images. After compilation, the image will be embedded into executable.
In order to access the image, consider the ResourceManager class:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/7fffb96c-81f8-4fe6-b4fd-fa423806801e. Adjust the name of the application, the name of resource file (without extensions) and the name of resource item.

Error while displaying file " C:Temp Filename.Ext cannot be created"

Dear Friends
Some users face problem while display the file. They get message " C:\Temp\ Filename.Ext cannot be created ". I checked Details. I got explaination as follows.
Caution! You are not authorized to work with temporary storage
Message no. ED204
Diagnosis
You do not have authorization to read or write from or to the temporary storage.
The system uses the temporary storage when you display or change programs using the ABAP Editor.
The system checks to see whether there is a temporary version of the program.
If there is, a dialog box appears in which you must choose whether to use the temporary version or the database version.
The system fills the temporary storage when the editor crashes or you save a temporary version of the program.
System Response
You probably do not have the authorization object S_DATASET.
Procedure
Ask your system administrator to assign you the relevant authorization.*
Actually this problem never occurs frequently. User access the files very frequently creating around 200 Mb to 400 Mb in C:\Temp Folder per day per user. I observerd as per message that User is not have Access right to C drive. Once I get access from IT for that user he is able to display file. But before giving right he is able to display file. But suddenly he is not able to display. I am not getting exact reason why this problem occurs. Some users temp folder size is upto 700 Mb with no acces right to C Drive still he is able to see the image.
In DC20 I have kept C:\Temp as path for temp folder.
I have checked the links also
Request you to provide me
What is exact reason of the error?
Is the solution to problem is giving access rights to the user?
Do I have to give authorization object S_DATASET to a user?
With Regards
Mangesh Pande

Dear Amaresh
Thanks for your reply and solution.
So you mean to say thats this Authorization object has to be provided to user?
But my question is how the user was able to see the file even when this Authorization Object was not assigned.
He was able to display all file. But for particular DIR he is not able to display.
I have checked this thread
http://wiki.sdn.sap.com/wiki/display/PLM/Error26172withSAPGUI710+patch13.
User has SAP GUI 7.10
File Version 7100.1.0.1027
Build 0
Patch Level 0
Request your help
With Warm Regards
Mangesh Pande

PREPARE UPLOAD_REQUEST CANNOT GET FILE LIST

Hello all,
In the PREPARE, phase UPLOAD_REQUEST, received error 'CANNOT GET FILE LIST OF '..EPS\in.. folder.
Log UPLOADREQ.LOG has the followin. Search in SDN and SAP did not get any result.
1 ETQ201XEntering upgrade-phase "UPLOAD_REQUEST" ("20081126150332")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '60', GwService = 'sapgw60'
4 ETQ399 Environment variables:
4 ETQ399 dbs_db2_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ399 Directory 'd:\usr\BZ3put\eps' not found.
4 ETQ399 Skipping copy of OCS packages.
2 ETQ730 Starting upload of all package files in "
ustcf001\patches\EPS\in"
4 ETQ010 Date & Time: 20081126150339
4 ETQ230 Starting RFC Login to: System = "BZ3", GwHost = "ustwa356", GwService = "sapgw60"
4 ETQ359 RFC Login to: System="BZ3", Nr="60", GwHost="ustwa356", GwService="sapgw60"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20081126150339
2 ETQ731 Upload failed, rc = "1", reason = "CANNOT GET FILE LIST OF
ustcf001\patches\EPS\in"
2 ETQ730 Starting upload of all package files in "
ustcf001\patches\EPS\in"
4 ETQ010 Date & Time: 20081126151823
4 ETQ230 Starting RFC Login to: System = "BZ3", GwHost = "ustwa356", GwService = "sapgw60"
4 ETQ359 RFC Login to: System="BZ3", Nr="60", GwHost="ustwa356", GwService="sapgw60"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20081126151823
Hope anyone can help, thanks in advance.
Thanks and regards
Terry

I tried to load the packages via SPAM, and got the following - does it mean I have corrupted EPS/in?
Could not create file list
Message no. PS 012
Diagnosis
A list of the required files could not be created as an error occurred.
Directory:
ustcf001\patches\EPS\in
File mask:
Error code: 17
Definition of error codes:
03 RFC system failure
04 RFC communication failure
11 invalid EPS subdirectory
12 sapgparam failed
13 build directory failed
14 no authorization
17 read directory failed
18 read attributes failed
22 too many read errors
23 empty directory list
System Response
The operation was terminated.
Procedure
Eliminate the cause of the error and repeat the operation.

QuickTime movies cannot display properly, refresh doesn't work propely for html files on hard disk, opening a new tab doesn't work

Hi!
I have tried Firefox V4 (but have since reused V3.6.16). The following problems were found:
a. Cannot display the controls used for QuickTime movies.
b. The refresh button doesn't function at all if the html files reside on the hard disk. I do this because I need to test the appearance of the web page before uploading to the server.
This problem also exists for v3.6.14 to v3.6.16
c. When opening a new tab, it doesn't work. Instead, it will open another instance of the browser. By right, it has to open the web page on the same instance of the browser.
This is my feedback.
Thanks!!!!! :)

I had some advice to try recording QT audio and adding to the slide. Now, when recording to Quicktime, it does embed it, but in recording the presentation, it either doubles up the audio giving a strange echo or does the same thing if you ever edit the presentation.
The problem Keynote has is that the sound and image content are not locked together which causes out of sync errors. This is why many users choose video editing applications when using sound in the presentations, as they have both image and audio tracks to sync sound properly together.
Start a new presentation to remove the previous sound recording, Keynote is holding onto the other sound files.
Add the graphic items to each slide and one sound file to each slide for the voice over
1 - In Inspector > Transitions; use start transitions automatically and set each transitions delay to the duration of the individual sound file.
2 - In QT export, set Fixed Timing and delete the value in the duration box, QT will then use the custom timings for each individual slide.
This procedure does work exactly as needed, Iv used this for nearly 6 years using 4 different versions of Keynote.

To display the list of File Name in a report region from a Directory

Hello All,
Can any one guide me in displaying the list of file name from a file system directory in a report region with link?
On click of the link it should display the open/save dialog box.
I will appreciate the early solution. (It is bit urgent)
Thanks,
Shyam

A quick, "dirty solution would be to have a cron job (I am assuming you are on a UNIX-based system) that populates a file periodically with the names of files in a directory/directories. Then have an external table that points to that file. You can then create an Apex report that lists the contents of the external table.
1) crontab job:
ls -1 /source_dir/* > /destination_dir/file.list
2) create external table:
CREATE DIRECTORY filedir AS ' destination_dir ';
GRANT READ ON DIRECTORY xfer_files TO public;
CREATE TABLE file_list_ext (file_names VARHCAR2(100))
ORGANIZATION EXTERNAL
TYPE oracle_loader
DEFAULT DIRECTORY files_dir
ACCESS PARAMETERS
records delimited by newline
fields terminated by ','
missing field values are null
(file_name)
LOCATION ('file.list')
REJECT LIMIT UNLIMITED;
3) create APEX report on table: file_list_ext
Hope this helps.

Clip-Art (png file)

Where can I download clip-art to add to my phone?
Please anyone provide me the website. Thks

PNG files for what?, album covers?, movies? or what.
Use Google Image finder. Find the images you want then use whatever picture tools you have in your PC and save as PNG.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Clip art. Png file sharing. One of my apps tells me I need to use this on iPad

How do I enable file sharing feature from I tunes ? I need to use clip art on an app. Specifically png.

http://support.apple.com/kb/HT4094
 Cheers, Tom

Clip Art Showing as Wav file

I am having aproblem on multiple computers where the clip art images downloaded from the Internet are showing as .wav files.
I have cleared the Temporary Internet Files and temp folder on the hard drive. I have also verified that the image is (for example) and jpeg and the file is supposed to open with Windows Picture and Fax Viewer.
Nothing has worked and I am getting quite frustrated. I have checked the kb that Microsoft has on their web page and did what they mentioned, but we are also not using a proxy so that can't be the issue.
Any information anyone could provide would be great and appreciated!
Thank you

Dear Tiffany,
This issue usually occurs because of the un-proper settings in IE. Based on the current situation, I suggest trying some methods to troubleshoot the issue and check
if the problem can be resolved.
Method 1: Check the program that opens the clip art picture
=========
Right click the clip art picture and choose
Properties. In the General tab, make sure
Internet Explorer is selected after Option with. If Windows Media Player is selected, please click the
Change button and change it to Internet Explorer.
Check the issue again. If the problem persists, let’s continue.
Method 2: Reset IE settings
================
1.
Exit all programs, including Internet Explorer (if it is running).
2.
Click
Start. Type the following command in the
Search box, and then press ENTER:
inetcpl.cpl
3.
The
Internet Options dialog box appears.
4.
Click the
Advanced tab.
5.
Under
Reset Internet Explorer settings, click
Reset. Then click Reset again.
6.
When Internet Explorer finishes resetting the settings, click Close in the
Reset Internet Explorer Settings dialog box.
7.
Start Internet Explorer again and check the issue.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
you, please feel free to let me know.
Best Regards,
Sally Tang

Cannot find a list of websites visited in cache or temp internet files...Help, please...

I cannot find the list of websites visited in cache or temp internet files. I see it in my history, but want to check the other in case someones deletes the history. Thank you...

Type "ipod touch not recognized in itunes" into the search bar a the top of this page by "Support".

Cannot display table's data from an Excel File

Hi everyone,
I have uploaded my excel table to ODI but now i got an error message on a window that whenever I try to see the info and it says more o less the following:
Oracle Data Integrator Error
Cannot display table's data.
java.sql.SOLException: [Microsoft][ODBC Excel Driver) The Microsoft Jet database engine cannot open the tile '(unknow)', It is already opened exclusively by another user, or you need permission to view its data.
Has any one faced this issue before?
I assume that it is something with the ODBC, but as far as I know it was all right.
I would really appreacite any ideas on how to solve this issue.
Best regards.
J

Something is reading your file, have you got it open in Excel?
I've had similar issues reading Excel via ODBC with OBIEE - once a process opens it you might find you need to kill whatever it was and restart it.
So its either you or the ODI Agent / Console , try restarting it if its not you.

Getting the Finder to display your list of files

Hi all,
The program I am contemplating would create a list of files that may be in several different folders. I'd like to present that list of files to the user in a format similar to the Finder's search results, letting the user move, copy or delete the files. Is there a way to tell the finder to display a list of files? I'd rather not re-invent the wheel by making a Finder-like interface since the Finder does what I want. I just need to tell it the set of files I want it to act on. I could make a temporary folder and fill it with aliases, but that seems messy. The Finder search results window is much cleaner and has the nifty expanding folder path graphic at the bottom. I've dug around some for an Applescript means of doing this and for Finder Plug-ins.
If that's possible, is there a way to get the Finder to tell me which file is selected in any particular Finder window?
Thanks,

<%
     File fParent=new File(getServletContext().getRealPath("/~tolmank/hsql"));
     File[] myDBFiles=fParent.listFiles();
     String name="";
     String fSize="";
     String lastM="";
     %>
<table width="50%" border="0">
<tr bordercolor="#000000" bgcolor="#CCCCCC">
<td width="36%" align="center">FILE</td>
<td width="30%" align="center">SIZE(kb)</td>
<td width="34%" align="center">LAST MODIFIED </td>
</tr>
<%
     for(int i=0;i<myDBFiles.length;i++){
          name=myDBFiles.getName();
          fSize=(myDBFiles[i].length()/1024)+"kb";
          SimpleDateFormat sdf=new SimpleDateFormat("EEE, d MMM yyyy HH:mm:ss Z" );
          Date lastD=new Date(myDBFiles[i].lastModified());
          lastM= sdf.format(lastD);
%>
          <tr>
               <td align="center"><%=name%></td>
               <td align="center"><%=fSize%></td>
               <td align="center"><%=lastM%></td>
          </tr>
<%
%>
</table>

Cannot display file list of Clip Art CDs containing EPS file

Similar Messages

Maybe you are looking for