Cannot display fullscreen.

I have several movies that were exported into iTunes and from there to the Apple TV. However none will play fullscreen. They all have ugly large black bars on top, bottom, sides. When I show trailers then I do have fullscreen picture.
My TV is a LCD HD Ready with 1366*768 and ATV is connected using HDMI.
Is it normal that my own imports are with these black bars or what am I doing wrong? I have searched a lot but do not find a solution.

@Alley Cat:
First of all: thanks for the help.
In the mean time I found out that (af far as I could check) all programms that are recorded with EyeTV have black bars on top 7 bottom. Reason that I never noticed is because (till now) I always watched them using EyeTV and this app apparently removes the bar or at least does not show them.
I export the app using EyeTV's "Apple TV" setting and I now have clearly proof that here the bars (top, bottom) in the resulting file and this again results on the TV in bars on all 4 sites.
(Hope it is still clear what I mean)
Other movies that I convert to iTunes/ATV e.g. using Handbrake are fine so no bars nowhere.
The culprit clearly is EyeTV. So I have to solve it within the app. But how?

Similar Messages

Cannot display custom error message in CRM_MKTLIST_BADI

We did implement the following BADI BADI Name: CRM_MKTLIST_BADI
Interface: IF_EX_CRM_MKTLIST_BADI Method: MAP_AND_CONVERT_DATA
This enhancement is for suport the extension field for create new BP in
external list management (transaction CRMD_MKTLIST). The BP creation
process work properly but we cannot display our custom error message,
only SAP standard error message is shown. We did try using the export
parameter ET_MKTLIST_E but it does not work as expected, custom message
still cannot display.
How we can be show the custome error message ?
Thanks in advance.
Supreeya K.

Hello Supreeya,
have you tried to post this question in the SAP CRM: Webclient UI - Framework forum?
Regards
Gregor

Error message "This program cannot display the webpage when uploading images to Cafe Press

I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
Most likely causes:
• You are not connected to the Internet.
• The website is encountering problems.
• There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address."
I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
Server not found
Firefox can't find the server at members.cafepress.com.
* Check the address for typing errors such as
ww.example.com instead of
[url=http://www.example.com]www.example.com[/url]
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
Nancy
http://www.cafepress.com/calendarflr

Sounds like your desktop application is in fact running from
a server. CHMs were identified as a security risk by Microsoft and
are best suited to the user's PC.
Click
here for more information.

Cannot display square root symbol in cvi

I don't understand why this would be an issue, but if I'm writing in the source window (with the default font of NIEditor), I cannot display a square root symbol "√" - every time I type alt+251, I get "v". Ok, not a huge deal in the source window, but it is a big deal if THAT is what's being stored in a string variable I'm writing out to a file. Additionally, if I use the following to format a string:
"Fmt(setpointUOM, "%s<W%cT/P3", 251);", then setpointUOM = "WüT/P3". If I display this variable in a string control, it displays as "W√T/P3", which is correct, but if I use it in a Text Box or save it to a sql database, it displays "WüT/P3" which is unacceptable.
I've tried changing the fonts but nothing works or I get even stranger results. I've been dealing with/ignoring this since CVI7 and I'm currently at CVI10. Thanks for any help.
Solved!
Go to Solution.

The difference in the display between W√T/P3 and WüT/P3 has to do with the character set that you select for the UI control. From what I can tell, only the OEM code pages map the √ symbol to character 251, so if you want to see √ for that character, you should pick the OEM character set, in that control.
Entering √ with the keyboard in a CVI window seems like a much more problematic task. When you type Alt+251 on a CVI window, the keyboard driver is converting the 251 to 118 (the letter v). I don't know why it does that, but I noticed that the code that it converts 251 to varies, depending on your input language (which you can change in Control Panel>>Region and Language>>Change keyboards or other input methods). When english is selected in the language bar, it converts it to 118. With other languages, it converts it to other codes. I tried entering the unicode value for √ directly, which is Alt+221A (to enter unicode characters using the keypad, you have to follow the steps described here). But it didn't work. It still converted it to 118. I suspect the keyboard driver is doing this because it tries to map 221A to some symbol that is valid in the code page that corresponds to the input language, isn't able to, and picks what it thinks is the closest match.
In lots of other applications (but not all) you can type Alt+251 or Alt+221A and it works just fine. This is because those applications accept unicode characters directly. Unfortunately, CVI isn't one of them. It uses code pages (a.k.a. character sets, or multibyte sequences) instead of unicode, and symbols don't have a universal meaning; they depend on the code page.
Even if all this were not an impediment, you'd still run into the problem that in CVI 2010 you cannot change the font of the CVI source window to use an OEM character set. So, you'd still see it displayed as a v or a ü. In CVI 2012 you can change the change it, and so if you were using CVI 2012 you could conceivably use the clipboard to paste the √, but there is a bug in CVI that is preventing OEM characters from being pasted correctly (I realize the description says that it affects tree tooltips, but it's also generally affecting clipboard operations of some less commonly used character sets).
So, to make a long story short, I think you should continue entering the code directly with the Fmt function, at least until this bug is fixed. And make sure that all UI controls that need to display this string are using the OEM character set.
Luis

Cannot display the folder. Microsoft Outlook cannot access the specified folder location.

Hi, guys
I cannot view delegate mailbox in Outlook. Following is my configure.
I have two mailbox A-User and B-User
Login Outlook as A-User, click File -> Account Settings -> Delegate Access, add B-User and give Editor permission of Inbox.
Right click A-User's root inbox and select Properties -> Permission, select B-User and check "Folder visible".
Login Outlook as B-User on other computer, click File -> Account Settings -> Account Settings, select B-User and click Change -> More Settings -> Advanced, add A-User.
Now I can see a root A-User in Navigation Pane. But when I click it, it shows
"Cannot display the folder. Microsoft Outlook cannot access the specified folder location."
or
"Cannot display the folder. Microsoft Outlook cannot access the specified folder location. The operation failed. An object cannot be found".
I searched some solutions from internet, but all of them don't work. Could you give some suggestions?
Thanks.

Hi,
First, please double check if you have given the right permission to B-User on your step 2.
In addition, we can try to give a higher permission to the B-user to check the result.
Please feel free to post back and let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

Cannot display the screen of the macbook on TV. OS is Lion 10.7.2. Connection to the TV is over HDMI cable. TV shows only the backgroud picture of Lion. Do you have any suggestions for help ?

Cannot display the screen of my macbook on TV. OS is Lion 10.7.2. The Macbook is connected to the TV is over HDMI cable. TV shows only the backgroud picture of the Lion OS and reacts even to mission control. Do you have any suggestions for help ?

You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

IE + SVG = "Cannot display XML page" ?

Dear friends,
   I am from Taiwan. I have a question about SVG display on IE.
   I have a very simply SVG file as the following code. I installed Ferdora R12 with apache web server (192.168.0.8) inside my company.
I installed Tomcat 6.0 on my PC(192.168.0.100, window 7 with IE8.0). I put this SVG file on Fedora, and I can see the vector graphs through
Chrome and Firefox, but not IE(already installed SVG viewer, with the error message as following). I put this SVG file on my PC, I can see the vector graphs by IE, Chrome and Firefox through Tomcat or opening file directly. I even put this SVG file on the web server of my company, and vector graphs can be displayed well through all of IE, Chrome and Firefox.
The problem seems only happen in the situation "Fedora R12 + IE". Do you have any idea of this problem? I really need your help.
Thank you.
======= Code =============
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.//EN"
"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg id="svg00" version="1.1" xmlns="http://www.w3.org/2000/svg" >
<svg id="svg01" x="0" y="0" width="654.1" height="654.1" version="1.1" xmlns="http://www.w3.org/2000/svg"
xmlns:xlink="http://www.w3.org/1999/xlink">
    <a xlink:href="http://www.w3.org//Graphics//SVG//Overview.htm8">
        <rect x="10" y="10" width="100" height="30" rx="10" ry="10"
              style="fill:lightgrey"/>
        <text x="30" y="30" font-size="12">Click here</text>
    </a>
    <a xlink:href="http://www.ibm.com//developerworks/">
        <circle cx="100" cy="100" r="50" style="fill:grey"/>
        <text x="80" y="100" font-size="12">Or here</text>
    </a>
    <a xlink:href="http://www.ibm.com/" target="new">
        <polygon
              points="60 160,165 172,180 60,290 290,272 280,172 285,250 255"
              style="fill:dimgrey"/>
        <text x="160" y="200" font-size="12">Or even here</text>
    </a>
</svg>
</svg>
==========================
The error message is in Chinese, but I translate it as possible as I can.
====== Error message ==========
Cannot display XML page
Cannot use style table (or form) to view XML input. Please correct this problem and reload this page, or try again later.
Unidentified error with processing resourse
There is something wrong with 'http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd'
=============================

Hi,
The string is not correctly formed ( a quote and a concatenation ) :
Your url :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port||')||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
The Correction :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port)||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
Hope it helps
Mohamed Dadi

Acrobat Reader cannot display Traditional Chinese Character correctly in 64 bit Windows 7

Hi,
I get a pdf file cannot display chinese character properly in Windows 7 64 bit but Windows XP 32 bit. I did uninstall and re-install Reader 9.4.3 and 10.0.1 with and without Traditional Fonts patch in the 64 bit machine but no luck. Does anyone have a solution for this?
Thanks in advance.

I run Acrobat 9.3.3 on my Windows 7 Pro 64-bit system with no problems. Perhaps you should make sure you have all of Acrobat 9's maintenance installed.
Ken Friedman

Internet Explorer7 cannot display the Webpage in forms 10.1.2.3

Hi all,
I have installed forms 10.1.2.0.2 to my laptop under Windows Vista Home Premium and followed the following steps :
1- changed virtual memory to (minimum of 2048 and maximum of 4096)
2- I updated forms 10.1.2.0.2 it to forms 10.1.3 using pathch 3 (patch ID 5983622)
3- I changed the application server Url in forms builder by choosing Edit, preferences, runtime and click on "Reset to default" button and added ?config=jpi at the end of the line.
when i run the form I got the message "Internet Explorer cannot display the Webpage"
when I called the link http://Computer_name:8889/forms/frmservlet?config=jpi
I got a message asking me to allow downloading java plug-in 1.4.2 ( which I know that it is not certified with Vista), So i refused downloading and updated the formsweb.cfg file as Steve Cosner said in his thread Vista Jinitiator problem
and added these new lines to the formsweb.cfg file:
[[jdk15]]
jpi_classid=clsid:CAFEEFAC-0015-0000-FFFF-ABCDEFFEDCBA
jpi_codebase=http://java.sun.com/update/1.5.0/jinstall-1_5_0_12-windows-i586.cab#Version=1,5,0,12
jpi_mimetype=application/x-java-applet;jpi-version=1.5.0_12
jpi_download_page=http://java.sun.com/javase/downloads/index_jdk5.jsp
baseHTML=basejpi.htm
baseHTMLjinitiator=basejpi.htm
baseHTMLjpi=basejpi.htm
baseHTMLie=basejpi.htm
When i run the form I got the same error message "internet Explorer cannot display the Webpage "
Again I called the link : http://Computer_name:8889/forms/frmservlet?config=jpi
then I got a message asking to allow loading and installing JRE 1.5.0_12 , and I allowed downloading and installation
After all of this, the form doesn't run and I get the same message "Internet Explorer cannot display the Webpage "
Is this a forms related problem or an Internet Explorer problem
Please help
Mostafa Abolaynain
Edited by: Mostafa Abolaynain on Jun 5, 2009 12:06 AM

jemar98 wrote:
We have a custom application built alongside Oracle Ebusiness Suite 12.
Launch a form from the Menu Navigator
Click in any field in the form
Focus does not change to the field that was clicked
Focus can be retained by pressing any keyIs this issue with all custom forms or specific ones?
Did you use the TEMPLATE.fmb file when building your custom forms?
Can you find any errors in the JRE Console Window?
Please obtain the FRD log file and see if you can capture more details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Digital Input Cannot Display this Video Mode Optimum Resolution 1280 x 1024 60hz.

HP Pavilion h8-1360t, Windows7 home premium 64-bit, AMD Radeon HD 7570 graphics card.
error message: Digital Input Cannot Display this Video Mode Optimum Resolution 1280 x 1024 60hz.
I get the error message as soon as Windows opens and the desktop displays. Then it goes black with that message. I've been using the computer for awhile and I had it so that when I maximized a window it would go across both screens. I have two monitors on the graphics card. Somehow I changed the settings so that a program would maximize to one monitor or the other. That is how I want it to work. Maybe I activated HydraVision. Now I have the problem when I start.
Also now when I boot to Safe Mode I get the message that there is no AMD graphics driver installed, or it is not functioning properly. I have tried to update it and the computer tells me I have the most recent version installed. I would like to uninstall it and reinstall it, but I'm a little worried I won't get it installed and be without video. Something like that happened to me once before years ago.
Could someone tell me what I should do please?
Thanks,
Jim Allen

HP support is here:
http://www8.hp.com/us/en/contact-hp/contact.html
In safe mode you should uninstall the driver, then try to boot normal again.
Then check if driver was installed by win7.
If not go go AMD website and download latest driver for your card.
V.
*** Say 'Thanks' with Kudos ***

IE browser and Web Cache and SSL - Internet Explorer cannot display the web page

When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce. The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
Event_log shows below errors.
[2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
[2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
[2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
        /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
        /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] [[
The following Oracle Web Cache internal files are pre-populated to the cache: [[
        /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
        /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
[2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
[2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
Any help or suggestions are greatly appreciated
Tnx a lot,
Lokesh

Hello ,
Try Below Workarounds:
Workaround 1:
Open Central Admin
àApplication Management à
Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
Workaround 2:
Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.
Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs ..
Best
Regards Kuldeep Verma
Please remember to click "Mark As Answer"
if a post solves your problem or "Vote As Helpful" if it was useful.

Web.show_document cannot display file with Chinese char in IIS 6

Dear all,
There is a problem that web.show_document cannot display file with Chinese char in IIS 6, but works fine in IIS 5.
Is it a server problem or is there any setting in server? Do you know how to solve it?
Big Thanks
JY

Hi,
As Francois mentioned, this issue has nothing to do with forms / web.show_document. web.show_document, just opens the URL specified as parameter. So, if you run the URL (that you've passed as argument for web.show_document), directly in the browser, you would be getting the same issue.
So, as you said, if it works fine in IIS 5 and does not in IIS 6, it would be an issue with the IIS and not forms. You might want to check out the IIS 6 release notes / documentation for any known issues / raise an issue in that.
-Arun

Cannot Display PDF in Browser

On our enterprise network I have found that suddenly folks cannot display PDF's in the Internet Explorer 7 browser.
The software and versions that are affected are:
Adobe Acrobat Pro 8.3.3
Adobe Acrobat Pro 9.3.3
Adobe Reader 9.3.3
Troubleshooting steps I have done:
Unchecked the option to Display PDF in Browser and rechecked it/
Completely uninstalled Adobe Pro/Reader has no effect. This includes deleting all files in c:\program files\Adobe\ and c:\program files\common files\Adobe\Acrobat\
Rebooting then manually reinstalling.
It behaves the same for Adminstrator accounts.
I have deleted the AcroExch.Document registry key and then repaired Acrobat to replace it.
Not sure what else to try. Is there a registry fix or could this be set by a Group Policy? I assumed that if it was a Group Policy then it would just uncheck the 'Display in PDF Browser' option in Adobe preferences. Even if that IS checked, PDF files still open outside of Internet Explorer.
Also note: we have Internet Explorer 7. Enable 3rd Party Browser Extensions IS disabled by a Group Policy but I think that only affects the Acrobat Toolbar from being implemented, not displaying PDF in a browser.
Any other helpful suggestions on what to try next would be appreciated.

Found the problem. It was a McAfee Host Intrusion Prevention Policy that was blocking it. Once that was updated, PDF files could display in IE.

Oracle Database 11gR1 Enterprise Manager Console Cannot Display in Browser

Folks,
Hello. I am running Oracle Database 11gR1 with Operaing System Oracle Linux 5. I have some issues regarding EM connects with the Database Server as below:
First, the default listener is LISTENER with standard port number 1521 and protocol TCP/IP.
Its corresponding service naming S1 is with port 1521 and protocol TCP/IP and hostname localhost.localdomain.
I run this listener in the following way:
Step 1: [user@localhost bin]./lsnrctl start LISTENER (This command runs sucessfully.)
Step 2: [user@localhost bin] ./sqlplus SYS/SYS as sysdba (This command starts sqlplus sucessfully.)
Step 3: [user@localhost sqldeveloper] ./sqldeveloper.sh (This command invokes SQL Developer sucessfully.)
But when start Enterprise Manager Console, it cannot connect with the Database. I do it in this way:
[user@localhost bin] ./emctl start dbconsole
The above command's output is:
https://localhost.localdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ... ...
When open the link https://localhost.localdomain:1158/em/console/aboutApplication in browser, this message comes up:
The connection to localhost.localdomain: 1158 cannot be established.
Thus, I add Port Number 1158 into both LISTENER and Service Naming S1. I run ./emctl start dbconsole again and get this message:
The connection to localhost.localdomain:1158 was interrupted while the page was loading.
In order to solve the above issue, I create another listener LISTENER2 and another Service Naming S2 with Port Number 1158 and protocol TCP/IP because
in my point of view, each listener only can have one Port Number(1521 or 1158) and its corresponding Service Naming (S1 or S2) need to have the same Port Number and Protocol (TCP/IP).
But when I run [user@localhost bin]./lsnrctl start LISTENER2, this message comes up: the listener supports no service.
From the message, it seems that LISTENER2 cannot work with its corresponding Service Naming S2 with Port 1158.
EM with Port 1158 cannot display in Browser.
My questions are :
First, Is there any relationship needed to be established between listener(LISTENER2) and Service Naming(S2) in order to display EM in Browser ?
Second, how do folks display EM in browser ?
Thanks.

Folks,
Hello. Thanks a lot for replying. I do the following command: [user@localhost bin]$ wget http://localhost.localdomain:1158/em
The command returns the message:
--11:36:33-- http://localhost.localdomain:1158/em
Resolving localhost.localdomain... 127.0.0.1
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `em'
[ <=> ] 7 --.-K/s in 0.002s
11:36:33 (4.15 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
--11:36:34-- (try: 2) http://localhost.localdomain:1158/em
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `em.1'
100%[=================================================================================================================>] 7 --.-K/s in 0s
11:36:34 (16.8 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
The above message repeats again and again until finally returns the following message:
11:39:02 (40.2 KB/s) - Read error at byte 7 (Connection reset by peer).Giving up.
In browser, http://localhost.localdomain:1158/em cannot display and pop up a Windows with the message: You have chosen to open whicn is BIN file from http://localhost.localdomain:1158 What sholud FireFox do with this file ? Save to Disk ?
My question is:
I don't know how to display http://localhost.localdomain:1158/em in Browser. How to solve the issue ?
Thanks.

Itunes will not install as IE link "cannot display web page"

I have been having problems with downloading podcasts and iTunes updates. So I followed Apple support suggestions including removing and (trying) to reinstall iTunes. However every time I hit the link for the download it takes me to a small pop up window with the address shown below, which does not load and tell me that "Internet Explorer cannot display the web page"
Arrhh Help anyone?!?
http://appldnld.apple.com/iTunes10/061-8246.20100901.Zxsew3/iTunesSetup.exe

System: Win7x64
Turn off ZoneAlarm.
“Run as administrative” Firefox.
I then went to the following install page which works:
http://www.adobe.com/software/flash/about/
It installed.
The following install page does not work:
http://get.adobe.com/flashplayer/
The following thread discusses the problem with http://get.adobe.com/flashplayer/ download.
Install Flash Plugin Manually in Firefox on Vista
With so many Firefox users, Adobe needs to fix the http://get.adobe.com/flashplayer/ download for Win7 users.

Cannot display fullscreen.

Similar Messages

Maybe you are looking for