Cannot display Print Preview

Hi, I am working on 3.1 version. I created plants, PO and did assignments. Uploaded master data. Everything is okay, but when I want display or print Preview PO through Transaction ME90 (ME9F in 4.7) it simply does nothing. It is not showing anything. Do I forget to do any configuration like assigning PO layouts to Company code.
Please help me. Thanks in advance

hi swetha,
Please check if you have set up the following ;
1) Define the PO Output Type (NEU, for instance) in spro .
2) Assign your PO Form and PO Print-out Program in spro.
3) Define Message Schema for Purchase Order. This step consists of two sub-steps -
3a) Maintain Message Determination Schema: Purchase Order. In this case use the Procedure RMBEF1.
3b) Assign Message Schema to your PO.
4) Maintain the Condition Record for your PO Message Type via Transaction MN04.
regards
Bijoy

Similar Messages

Application designer issue - Cannot display image preview

Hi guys,
When I attempt to use an image icon as the label for a pushbutton,
I receive this message in App Designer:
"Cannot display image preview.
The ImgDisplay ActiveX control may not be properly registered. Use the
Install Workstation functionality of Configuration Manager to register this control"
Anyone has the same experience on it ?
Thanks in advance.

What OS is your workstation running on?
Which PeopleTools version are you running?
Are your an administrator on the workstation?
Did you try Install Workstation from Configuration Manager as stated in the error?

HP 8625, cannot see Print Preview or Select Pages

On my new HP 8625, I cannot see the Print Preview feature nor can I select to print specific pages. This used to work on my HP c309, so I'm thinking perhaps it's a printer driver issue. I am specificially having this issue with Excel but it may be occuring in other programs as well.
Any suggestions?
Thanks for any info.

Hello @TheEveryman , welcome to the forums
I would first suggest checking to see if you have Print Preview and the option to print specific pages from other programs, besides Excel as this will show us if the problem is solely within MS Excel, or all programs, which could be a driver issue.
Skipping forward a little bit and assuming the issue is in all programs, you could try Uninstalling the Printer Software, restarting the computer and reinstalling the printer, here: HP Officejet Pro 8625 e-All-in-One Printer Drivers.
Please let me know which operating system you're running on your computer and the results from testing the other programs on your computer. The more detail you include, the better!
Have a great day and hope to hear back from you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to Display Print Preview Using GET_PRINT_PARAMTERS

Hello,
My requirement is to provide Print Preview Option in the Print box.
In my program am using Get_Print_Parameters to display the Print window.It is having some of few Opetions like Print and Properties.Similarly I want Preview Option in the same window.
Please tell me which parameter i need to to set for the same.

Hi
CALL FUNCTION 'GET_PRINT_PARAMETERS'
   EXPORTING
   ARCHIVE_ID                   = C_CHAR_UNKNOWN
   ARCHIVE_INFO                 = C_CHAR_UNKNOWN
     ARCHIVE_MODE                 = LS_PRIPARAMS-ARMOD
   ARCHIVE_TEXT                 = C_CHAR_UNKNOWN
   AR_OBJECT                    = C_CHAR_UNKNOWN
   ARCHIVE_REPORT               = C_CHAR_UNKNOWN
   AUTHORITY                    = C_CHAR_UNKNOWN
     COPIES                       = LS_PRIPARAMS-PRCOP
   COVER_PAGE                   = LS_PRIPARAMS-PRSAP
   DATA_SET                     = C_CHAR_UNKNOWN
   DEPARTMENT                   = C_CHAR_UNKNOWN
     DESTINATION                  = LS_PRIPARAMS-PDEST
   EXPIRATION                   = C_NUM1_UNKNOWN
     IMMEDIATELY                  = LS_PRIPARAMS-PRIMM
   IN_ARCHIVE_PARAMETERS        = ' '
   IN_PARAMETERS                = ' '
     LAYOUT                       = LS_PRIPARAMS-PAART
   LINE_COUNT                   = C_INT_UNKNOWN
   LINE_SIZE                    = C_INT_UNKNOWN
   LIST_NAME                    = C_CHAR_UNKNOWN
     LIST_TEXT                    = LS_PRIPARAMS-PRTXT
     MODE                         = L_PRINT_MODE
     NEW_LIST_ID                  = LS_PRIPARAMS-PRNEW
   PROTECT_LIST                 = C_CHAR_UNKNOWN
     NO_DIALOG                    = 'X'
   RECEIVER                     = C_CHAR_UNKNOWN
     RELEASE                      = LS_PRIPARAMS-PRREL
   REPORT                       = C_CHAR_UNKNOWN
     SAP_COVER_PAGE               = LS_PRIPARAMS-PRSAP
   HOST_COVER_PAGE              = C_CHAR_UNKNOWN
   PRIORITY                     = C_NUM1_UNKNOWN
   SAP_OBJECT                   = C_CHAR_UNKNOWN
     TYPE                         = LS_PRIPARAMS-PTYPE
   USER                         = SY-UNAME
   USE_OLD_LAYOUT               = ' '
   UC_DISPLAY_MODE              = C_CHAR_UNKNOWN
   DRAFT                        = C_CHAR_UNKNOWN
   ABAP_LIST                    = ' '
   USE_ARCHIVENAME_DEF          = ' '
   DEFAULT_SPOOL_SIZE           = C_CHAR_UNKNOWN
   WITH_STRUCTURE               = C_CHAR_UNKNOWN
   SUPPRESS_SHADING             = C_CHAR_UNKNOWN
   PO_FAX_STORE                 = ' '
   NO_FRAMES                    = C_CHAR_UNKNOWN
   IMPORTING
   OUT_ARCHIVE_PARAMETERS       =
     OUT_PARAMETERS               = ES_PRIPARAMS
   VALID                        =
   EXCEPTIONS
     ARCHIVE_INFO_NOT_FOUND       = 1
     INVALID_PRINT_PARAMS         = 2
     INVALID_ARCHIVE_PARAMS       = 3
     OTHERS                       = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Populate the values to the above Function Module as per your requirement.
Regards,
Sreeram

Error while displaying print preview of smartform in VL03n

Hi all,
i created one smartform & print program . i assigned this in NACE tcode for ZD05 output type.
Then i am trying to see the print preview in VL03n while doing issue delivery output.
But i am getting error like ' Output could not be issued'. Please suggest where i am doing mistake. Thanks.
Regards
sumitra

Hi,
Follow below Steps:
1) Double Check your program and smartform names where you are attached in nace transaction.
2)check your templates and tables having formatting issues.
3)Finally create dummy of your smartform. then delete one by one window in smartform check it and trace out in which window error is existing.
even i faced same problem.
in my case i gave wrong line and column numbers under the template node texts. it won't show the error in smart form but while executing transaction out put could not issued.
Thanks,
Satheesh.

Error in display print preview of PF Form....

Hi gurus,
I am able to generate the report for the transaction code pc00_m40_EPF for form 12A. but could not get print preview for the same.
I am getting the results but couldn't generate report. its giving (print error) Last month payroll results not available for employee no. 00000001 though i have payroll results for that period. Please guide me..
Point will be awarded immediately n accordingly.
Regards,
Ravi
Edited by: ravi Kumar on May 25, 2010 5:50 PM

Cannot find PDL type for output device LP01
This is related to Printer
still you are not able to get the desired results for Form12B
Cross check
the entire configuration of your PF and check the Live results are being updated in Clusters or not
still if the problem presists please contact me you can check my Bcard
Note : once the issue is solved please update the thread or i will update on behalf of you

Illustrator CC 18.1.1 print preview is not displaying preview properly. Any work around?!

I only started having this problem recently. It might be a Yosemite bug or graphics driver bug. When I go to print in the latest version of Illustrator CC 18.1.1 I get a shrunken window of what print preview should be (see below).
Circumstances are that I have my MBP 15" Retina connected to a Apple Thunderbolt Display. When I'm working in Illustrator on the Thunderbolt display and have the laptop screen open beside it, print preview will not display correctly. If I drag the print dialog box over to the laptop screen, it then shows print preview correctly. Also, I found that if I close the laptop screen and just work off the Thunderbolt display print preview works correctly again. ITS DRIVING ME CRAZY! Please Help!
I'm currently running:
OS X 10.10.2
MacBook Pro (Retina, 15-inch, Early 2013)
2.8 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
Screenshot from Thunderbolt Display. Print Preview is shrunk to upper-left hand corner:
Screenshot from laptop screen when I brought the print dialog window over to it. The print preview corrected itself:

Thanks pipinngpete. You helped me understand what was going on. Here is my post:
Illustrator print preview is not displaying the preview properly. Any clue as to why?
Rob

Thai Language displaying in '#' in print preview

Hi experts,
By use of smartform, I am printing the address by fetching datas from tables which are of Thai language.
But in print preview, I am getting '#' characters instead of thai characters.
FYI: I used the Thai lang paragraph format only.
While debugging I can see thai language format correctly but only displaying print preview I am getting
the '#' characters instead of thai characters.
FYI:
I installed thai languages and also my system supports thai lang.
Kindly help me in this regard.

Hi,
If you are able to print it properly and not able to view it in print preview or not even able to print it, then you need to do some addition of adding them in the UNIX server i guess, usually basis people will know about this.
Another possibility could be, UNICODE issue. Let's say if you are using any OPEN DATASET commands, check the ENCODING used, whether it supports these characters or not.
Regards,
Santhosh.

Print preview for PO output

Hi,
I have an issue with viewing print preview for PO output.
In Messages,output type has been defined.
I am trying to display print preview of the PO outpit by clicking on the print preview button.
Instead of displaying the print preview on my screen,the printout is directly fired in the printer.Please note I am trying to display just the print preview and not printing the PO.
This happens even when I have not set 'Print immediately' indicator in Communication setting and have defined 'Send with application own transaction'.
Your input on this would be of great help,
Regards,
Bikram

Hi,
Triggering print or Preview option is dependent on driver program assigned to output type in OMTB. It will be customized program. You need to do modification in your customized program.

Print preview for the special characters / symbols

While displaying print preview / taking print output using QGA3 Transaction with developed Z SAPScript form specified as one of the parameters(say for example ZARMEXP), the special characters / symbols like u2018∆u2019 are displayed as u2018#u2019 in the print preview / print output . Of course similar problem had existed for Lambda Symbol u2018u03BBu2019., but it was resolved by using the font type Helve_I7. But for the symbol u2018∆u2019 we checked with almost all the fonts that were available in the system, but of not much use. Hence could you kindly provide us solution(s) that would resolve this issue.

Hi ,
Can you please check language are installed properly in sap check with basis people. then try to print it will work.
when ever language are not maintin properly , the characters or symbols are not print properly.
Regars,
Munibabu.k

How to view Smartform Print Preview

Hi,
I have a Sales Order, Print output is issued which has smart form & Print Program. Can you explain me how to view the print preview again for the Sale Order for which ouptut has been issued in ECC 5.0.
Many Thanks
Lakshmi

Hi Atish,
I did tried by going VA03 Screen & then Selected
Extras- Output - Header - Print Preview from Menubar
but no luck I cannot see Print Preview of the output.
Thanks
Lakshmi

Form 16 print preview

Hello experts,
             I am execute pc00_m40_f16 and after list display when i click on print form and then on print preview button i am not able to display print preview. If i only click on customer layout then preview will display but it is a smart form or sapscript display i want to display it in PDF. Is there any setting regarding this.
Thanks in advance
Unmesh

Hello Unmesh
For PDF display and print preview ,you need to have ADS configured.
having done this ,Please implement the Note 1447617 to resolve the issue. Please implement
the correction instructions attached with the Note.
Also, please note that the note involves changes in Job profile change
in the ADS server
1   Preparation for JobProfile on ADS server
     Refer to SAP note 886572. This note has section for 'JobProfile'.
     Follow steps in this note.
2. Copy JobProfile xml file to ADS server
     Download attached Remove_Annote.zip and extract.
     Copy Remove_Annote.xml file to ADS server
/usr/sap/<SID>/SYS/global/AdobeDocumentServices/JobProfiles/Custom/print
Thanks and Kind Regards
Ramana

Display / Print the settlement run. (MEBI)

Hi All,
Please assist here.
I am trying to dispaly / print the settlement run via MEBI. Unfortunatly the document cannot display / print the form.
I get the messages:
1.No messages for initial processing exist
2.No messages for repeat processing exist
What could be the problem here?
Configuration has been done to maintain message determination for settlement run.
Please advice.

Hi ,
Please check Settlement run Field value....May its not correct......
Regards

How can I stop Firefox 4 from displaying "The document cannot change while Printing or in Print Preview" from appearing every time I click on File/Page Preview?

Clicking on File/Page Preview in Firefox 4 brings up a warning dialog "The document cannot change while Printing or in Print Preview" every time. How can I stop this from happening? It is very annoying, and it is necessary to click "OK" on this dialog twice before it will go away. Thank you.

Does it behave that way in [[Safe Mode]] ?
If it doesn't, then one of your add-ons in the culprit.

Text in samrtforms when print preview display as ####

Dear friends,
I have got the problem about smartforms, I have created my own smartform with original language TH and created the text node with Thai and English including Numeric Character. But when I executed the form to print preview, any texts cannot be read, its display as ###### neither I logon with TH nor EN Language. Please advise.
Ps. any texts in text node when seeing in smartforms can be read normally, it got the problem when print preview.
More information of my smartforms:
1. Language Attributes: Original is TH, Translate to all language, do not tick any checkboxes of Access area.
2. SAP version is ECC 5.0, Basis and ABAP Support Package is 014 Release 640, Application Support Package is 008 Release 500.
3. Kernel Release 640 Patch Level 101, Oracle 8.1.7, DBSL version 640, Patch Level 101.
4. OS Windows 2000 Service Pack 4
Thank you in advances,
SeMs

Hi!
Which printer do you use?
Check in the transaction spad which printer and printerdriver you use. Dobbleclick on the printerdriver and check which codepade is assigned.
I think it has to be one of the following codepages:
8600     Thai Codepage ISO988/2533
8604     Microsoft Windows 874 for Thai
8611     Thai Printer Codepage 1 (EPSON ESC/P2)
8616     Printer HPLJIIID (Thai)
8617     Thai Postscript printing
8634     Thai Printer codepage (THSAPWIN)
Pleas try this.
BR
Silvio Hey

Cannot display Print Preview

Similar Messages

Maybe you are looking for