Cannot distribute ALE model

I've gone through the steps to create a model view, message types and generate the partner profiles in my SRM system. When i try to distribute the model to the backend, I get the follwing error:
Model view XXX has not been updated
Reason: No authorization to create model view XXX
..... authorization object B_ALE_MODL
..... Parameter: activity 01 , model view XXX
Can anyone tell me what that means?
Thanks,
SN

Hi ,
It means that your ALE user that is used to connect to the backend does not have all the authorization required to replciate the ALE model.
B_ALE_MODL is missing.
Please add this object to the ALE user and test again.
Kind regards,
Yann

Similar Messages

Error while distributing customer model

hi,
i am getting the following error when i am trying to send data between two R/3 systems using distribution model
i am unable to distribute the model to the other system
Error:
"Target system is an external System. It does not support this function."
even after successfully generating partner profiles i am getting this error.
could someone help me out with this problem

Hi Siddharth
Can you please update about all the ALE setting that you have done before trying to distribute the model to the other system.
And whether you have put correctly - the sender and receiver while creating the distribution model. And, most importantly the partner profiles?
Please update..
Regards
Ashish

Error in Distributing the model view

Hi,
I have clients 600, 610 & logical systems (ls_600, ls_610) in the same system.
I am trying to set up the ALE customizing and distribute the model view.
I have created RFC from 600 to 610 and the test connection is fine.
I have created a model view in which i have given sender system as LS_600 and
receiver system as LS_610 and the message type as MATMAS.
In the partner profile(WE20) of LS_610(client 600), in the outbound parameter SYNCH
i have given a port which uses the RFC to 610.
When i have tried to distribute the model view it is giving error as
'communication error occured. Username or password is not correct (Repeat Registration).'
I am not able to figure out the error.
There is also a partner profile as ls_600. Do i have to
make any changes there ?
Do i have to do something in the client 610 ?
Your help is highly appreciated.
Thanks,

Hi Prasad,
Please maintain the MATMAS & SYNCH Message type in the Outbound partner profiles of LS 610.
Test distributing the MATMAS IDoc's using BD10 without even maintaining Distribution Model.
And let me know if you are able to distribute the IDoc or not.
If you get the error. Please let me know the error.
Regards,
Krishna

Need suggestion for ISE distributed deployment model in two different data centers along with public certificate for HTTPS

Hi Experts,
I am bit confused about ISE distributed deployment model .
I have two data centers one is DC & other one is as a DR I have requirement of guest access service implementation using CWA and get public certificate for HTTPS to avoid certificate error on client devices :
how do i deploy ISE persona for HA in this two data centers
After reading cisco doc , understood that we can have two PAN ( Primary in DC & Secondary in DR ) like wise for MnT (Monitoring will be as same as PAN ) however I can have 5 PSN running in secondary i.e. in DR ISE however I have confusion about HA for PSN .. since we have all PSN in secondary , it would not work for HA if it fails
Can anybody suggest me the best deployment solution for this scenario ?
Another doubt about public certificate :
Public Certificate: The ISE domain must be a registered or part of a registered domain name on the Internet. for that I need Domain name being used from customer .
Please do correct me if I am wrong about certificate understanding :
since Guest will be the outside users , we can not use certificate from internal CA , we need to get the certificate from service provider and install the same in both the ISE servers
Can anybody explain the procedure to opt the public certificate for HTTPS from service provider ? And how do i install it in both the ISE servers ?

Hi there. Let me try answering your questions:
PSN HA: The PSNs are not configured as "primary" or "secondary" inside your ISE deployment. They are just PSN nodes as far as ISE is concerned. Instead, inside your NADs (In your case WLCs) you can specify which PSN is primary, which one is secondary, etc. You can accomplish this by:
1. Defining all PSN nodes as AAA radius servers inside the WLC
2. Then under the SSID > AAA Servers Tab, you can list the AAA servers in the order that you prefer. As a result, the WLC will always use the first server listed until that server fails/gets reloaded, etc.
3. As a result, you can have one WLC or SSID prefer PSN server A (located in primary DC) while a second WLC or SSID prefer PSN server B (located in backup DC)
Last but not the least, you could also place PSNs behind a load balancer and that way the traffic would be equally distributed between multiple PSNs. However, the PSN nodes must be Layer 2 adjacent, which is probably not the case if they are located in two different Data Centers
Certificates: Yes, you would want to get a public certificate to service the guest portal. Getting a public/well known certificate would ensure that most devices out there would trust the CA that signed your ISE certificate. For instance, VeriSign, GoDaddy, Entrust are some of the ones out there that would work just fine. On the other hand, if you use a certificate that was signed by your internal CA, then things would be fine for your internal endpoints that trust your internal CA but for any outsiders (Guests, contractors, etc) that do not trust and do not know who your internal CA is would get a certificate error when being redirected to the ISE guest portal. This in general is only a "cosmetic" issue and if the users click "continue" and add your CA as a trusted authority, the guest page would load and the session would work. However, most users out there would not feel safe to proceed and you will most likely get a lot of calls to your helpdesk :)
I hope this helps!
Thank you for rating helpful posts!

IDoc to IDoc scenario: distribute the model view

Hi!
I try currently to configure a IDoc to IDoc scenario for SAP ECC 6.0 system with following business 2 systems:
ERP:100 (Sender)
ERP:200 (Receiver)
and XIB:100 (XI system)
I successfuly created a message type and generated the model view in tcode BD64.
Question:
When I try to distribute the model view which system should I choose?
a) XI System or
b) Receiver system ERP:200
When I choose the receiver system ERP:200 and get the following error
Target system: ERP:200
Model view ECCCLNT100 has not been updated
Reason: Distribution model is currently being processed
When I try to choose my XI system I get the following error:
Target system: XIB:100
RFC destination for synchronous communication (message type SYNCH)
Partner profile LS PIBCLNT100 SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Is that an error? If yes, how can I fix them?
Thank you very much
Thom

Hi
Look my reply on this thread regarding SYNC Message Type.
Re: problem while distribute model view
When I try to distribute the model view which system should I choose?
a) XI System or
b) Receiver system ERP:200
You are sending IDoc to XI then R/3 so select XI system. because receiver of IDoc is XI then IDoc would be send from XI.

Error - Distributing the Model using BD64

Hi! All
Not able to distribute the model from the Sender System.
Error : Model view ZDMKANBAN has been changed
While Generating the Partner Profile able to generate Partner, Port, Outbound parameter from the Sender System.
but if i execute an IDOC through WE19 able to get the Status - 03 for Sender System & Status - 53 for Receiver System
when i try to transfer IDOC from Sender System to Receiver System could not do it.
Hope so bz of error occurred in Distribution Model. Is it So
kindly help me.

you have to distribute the distribution model in its new version

Too many recipients found for message type ORDERS in the ALE model

Hi all ,
please help me to solve this issue .
i done with ale settings .
orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

> orders message type is used in 2 different model view for 2 different systems
do both of them carter diffrent needs or is it the same idoc which is being sent to diffrent systems?
if yes, then use a single model view with noth receiver systems defined in it.
if not, i would suggest, copying the standard idoc and create a zidoc and then use different ones for diffrent receivers....
or u can use diff versions of the orders message type...
say orders05 for one.... receiver and orders02 for another one....
hope this helps!!
Cheers!!
Sidharth

Too many recipients found for message type in the ALE model

Hello Friends,
Please help me in solving this error. I have a Outbound sales order confirmation ORDRSP .
In the distribution model i have defined the sender receiver and message type clearly...
But in va01 after creating sales order extras ->Output->Hearder --->Edit
Output type-- BA00
medium --ALE
Dispatch time : Send Immediately
I am getting a error -
Too many recipients found for message type ORDRSP in the ALE model
Message no. B1130
Diagnosis
In the ALE distribution customer model several recipient systems for IDOCs with message type ORDRSP and filter object type 'KUNNR' with value '100' have been modeled from this system, but only one recipient system is allowed.
Procedure
Please change the ALE distribution customer model so that it allows only one recipient system for the message from this system.
Please help me in solving this error.
Regards,
jeevan

Hi Jeevan,
In BD64, the said problem occurs, since the message type ORDRSP will be configured to different Logical System.
Since you are creating sales orders & Output type, system doesnt knows, to which Logical system, it has to be sent since the Message type exists more than once.
select Your respective Logical System where the Outbound Sales Order Confirmation ORDRSP has been created.
Under the node ORDRSP, add the filter group for Customer.
Double click the Filter group and add the respective Customer No.s to whom the Order confirmation needs to be sent.
Then create Sales Order Confirmation & Output type. Data will be passed(IDoc) to the respective Customer(where the customer no.) exist in the filter.
Hope it solves your Issues.
Regards,
Anbalagan.

Cannot Distribute PDF Form to Email

I've created a form and have everything set. Then I go to "Distribute Form" and enter the email address and other pertinent info of who will receive completed form... It then will not advance to the next dialog box to actually get the form functioning to be able to "Submit." Any all help with the matter would be greatly appreciated.

Okay I just found the answer that worked for me on another post and it is pasted below: Now I did select remember my selection but then I unselected it and it still fixed what ever was wrong with the issue.
1. Sep 17, 2009 8:17 AM in response to: malaki
Re: Cannot distribute form
OK - I figured it out but not sure why it works. Picking Distribute Form and having it automatically remember my selection is where it fouls up. When that screen opens (see my screencap) I pick my method again and it restarts the wizard and it works.
Attachments:
issue.jpg (74.1 K)

Cannot unlock a model VC

Hello,
I have a problem with a model in Visual Composer. The problem is I cannot unlock a model locked by me. In the "Unlock Models" dialog, I checked my model and clicked on button "Unlock" and the dialog is closed. When I re-open "Unlock Models" dialog, my locked model is always here. I can't also remove the model because it's locked. Finally, I can open my model in read only. I logged as Administrator into Visual Composer.
There are the contains of my vc.log :
Date : 04/24/2008
Time : 15:13:25:217
Message : Admin.UnlockModels , remove of file PublicAgileRefDonGenSociete.mdl1_AgileRefDonGenSociete.mdl failed. exeception: <ERROR code="-1">Server Error: failed to save your changes on model.</ERROR>
Severity : Debug
Category : /System/Server/VCServer
Location : com.sap.portal.vc.server
Application : sap.com/VisualComposerServerEar04
Thread : SAPEngine_Application_Thread[impl:3]_24
Datasource : 18184050:H:\usr\sap\EPD\JC01\j2ee\cluster\server0\log\vcserver\vc.log
Message ID : 00145E36AA16006A00001202000016A800044B9E36ECFDB4
Source Name : /System/Server/VCServer
Argument Objs :
Arguments :
Dsr Component : BCNSSAP009_EPD_18184050
Dsr Transaction : bc46c47011ff11dda08000145e36aa16
Dsr User : X.XXXXXX
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives : /System/Server/VCServer
Resource Bundlename :
Session : 113445
Source : /System/Server/VCServer
ThreadObject : SAPEngine_Application_Thread[impl:3]_24
Transaction :
User : X.XXXXXX
Can I remove the locked model in the Visual Administrator ? in the portal ? or on the hard disk ?
Thank you for your help.

Hi again,
After several days of search, i founded a ...gross method to "unlock" a VC model which don't work in VC IHM environment. Work only if you have right to access to Visual Administrator.
This document indicates that : [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/659c082e-0c01-0010-2e9f-ac674cfff2d2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/659c082e-0c01-0010-2e9f-ac674cfff2d2]
In Visual Administrator, under Runtime / Display Configuration tabs, all locked or actually opened models are in Configurations / developmentserver / ClientWorkspaces / Environment / Copy. Select the locked model and delete it. To be done carefully, of course.
regards
Francois

Cannot distribute OS installers which have been added with 'New-CMOperatingSystemInstaller'

After adding an OS installer with PowerShell, you cannot distribute the GUI option 'Distribute Content' is greyed out:
New-CMOperatingSystemInstaller -Name W8 -Path "\\cm01\e$\Source\OS\W8"
The issue occurs with ConfigMgr 2012 SP1 and ConfigMgr R2.
The underlying server OS doesn't matter either (tested with Windows 2008 R2 and Windows 2012 R2).
The OS installer doesn't seem to matter either (tested with W7SP1, W8 and W8.1).
If I add the OS installer through the GUI, then the 'Distribute Content' button is available.

Additional: There are subtle differences between the properties of the OS installers:
Installer added by PowerShell:
Name : W8
NumOfPrograms : 0
PackageID : ABC00035
PackageType : 259
PkgFlags : 0
PkgSourceFlag : 1
PkgSourcePath : \\cm01\d$\Source\Operating System Installers\W8-ENT-X64-EN
Installer added by GUI:
Name : Windows 8 Enterprise X64 EN
NumOfPrograms : 0
PackageID : ABC00006
PackageType : 259
PkgFlags : 16777216
PkgSourceFlag : 2
PkgSourcePath : \\cm01\d$\Source\Operating System Installers\W8-ENT-X64-EN

Error while distributing the model

Hi
I am not able to successfully distribute my model thru BD64. I am getting the error msg as ' the model has not been updated'.The configuration done till now is according to the basic procedure.
Can anyone please suggest a way to overcome this error.
thanks

Hi,
You can create a distribution model and then add message type to it; however, there are some preconditions which you need to ensure before you create the model.
Preconditions:
1) Ensure that you have the message type in both the systems; if custom msg type is used, you need also to create the one in the partner system.
2) Do all configuration related to msg type, idoc type, etc in your partner system as well
3) Create RFC destination in the current system for your partner system... and test the connection if it is working fine
After you create the model and added msg type to it, you also need to do the following:
1) Go to Edit --> Model View --> Distribute to distribute/ create it in your partner system
2) To validate, you can check in your partner system if the model is automatically created there
3) Then create Partner profile in both the systems by going to Environment --> Generate Partner Profiles
Hope it helps and solves your problem.
Regards, Tapas
<Pls award pts if useful or answered>

Import from Illustrator: Cannot Distribute to Layers

Hello,
I have created a vector design in Illustrator on a single layer and have imported it into my Flash library using the import layers to Flash Layers option. Because I created the design on a single layer in Illustrator, the design imports as a single layer in Flash. My problem is that I cannot distribute any of the individual graphics to a new layer, even after converting them to movie clips. When I select "Distribute to Layers", a new layer is created for each of the selected graphics but the layers are empty.
I have also tried cutting a graphic from the import layer and pasting it into a new layer but it always pastes back into the original import layer rather than the one I have selected.
Is there any way around this or will I need to go back into Illustrator and create separate layers based on my needs in Flash?
Thanks!

Hmm, that does sound like incorrect behavior. I'm trying this with a simple illustrator CS4 document (few squares and some text), and Flash CS4. It imports to the single layer of course, but when I select everything and Distribute to Layers, it moves the elements as expected. I'm guessing there must be some other factors involved here.
Are you able to share your file? Also the versions of Flash, Illustrator, operating system and so forth would help.

Unable to distribute the MODEL to backend system in SRM 5.0

Hello Experts,
I have created distribution model " SRM_to_R3" in BD64, maintained message types BBPCO, BBPIV and MBGMCR
Every time I try to Distribute this MODEL to back end system I get the following error in IDES system
Target system T90CLNT090       Commnunication error occurred, error when opening an RFC connection
RFC connections are
T90CLNT090   - SRM to R3
SRM_00_800   - R3 to SRM
Systems got connected successfully and I can "Remote Logon" too......
My query is why am not able to send or distribute the MODEL from SRM to ECC backend system ?
How to get rid of the error and successfully distribute MODEL to backend system.........appreciate your help in this regard
Rgds !
SAP Novice

Hi Zuljana,
Kindly check if your partner profile is active. (Indicated by 'A')
Sometimes if your partner profile is not active, you wont be able to distribute your model. Check the 'A' indicator
Regards,
Nikhil
Edited by: Pbponikhil on Dec 21, 2010 4:11 PM

WhAT Is distributing the model

Hi All
Can anybdy plzz explain me what do we mean when we say we distribute the distr model in bd64?

Hi
The distribution model describes the ALE message flows between logical systems.
<b>Use</b>
You can specify the relationships between logical systems, message types, BAPIs and filters in the distribution model. Applications and the ALE layer use the model to determine receivers and to control the data distribution.
<b>Structure</b>
In the distribution model you can specify the messages to be sent to a given logical system. You can also define the conditions for the content and dispatch of messages in the filters.
The distribution model consists of one or more views that you can define. With more complex distribution tasks you can assign business sub-areas or groups of logical systems to separate views.
The relevant views of the distribution model must be available in all the logical systems involved in ALE. You can find the functions for distributing views in Customizing for ALE.
Hope this helps.
Regards
Sumit Jain
**Reward with poitns if useful

Cannot distribute ALE model

Similar Messages

Maybe you are looking for