Cannot do a Restore on my iPod
Trying to reset my iPod. Tried doing a Restore from inside iTunes (7.3.1) and get an error message stating that it cannot do a Restore because some files are being used by another program. I noticed that I get an icon for a removable drive in Computer. What do I need to do to do a Restore?
Check your antivirus and antispyware software and be sure they are set to ignore iPods and, if you have enabled disk access, external storage devices.
Also read this:
http://docs.info.apple.com/article.html?artnum=93499
Similar Messages
-
I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..
If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation -
IPod cannot be updated/restored/ejected--files in use by another app
Since I downloaded iTunes7, I cannot update, restore, or eject my iPod from iTunes. I get the error "<iPod name> cannot be updated(restored, ejected) because it contains files in use by another application." I'm still able to sync music and tv shows with the old iPod software, but not movies. I eject it using the Safely Remove Hardware icon in my system tray, or from My Computer. I've tried disabling security programs and peripherals, and even sifting through the processes in Task Manager. I had no trouble ejecting prior to iTunes 7/7.0.1.
And yes, I've done the R's I'm able to do (Restore is not an option due to the nature of the error).Hi again, Corey!
In regard to "recovery mode" message, you'll most likely just need to restore your iPod. For more details, read here -> Restoring your iPod
If this message persists after restoring your iPod, try assigning your iPod a different drive letter; see these steps below:
Log off of any other users on your computer.
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod with network device / Changing drive letter
I hope this helps you!
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards! -
Cannot restore or update iPod in iTunes 7 or later????
Nano completely crashed today and said to restore with iTunes but i get this error "Error 1415, 1417, 1418, 1428, 1429, 1430, 1436 or 1439: Cannot restore or update iPod in iTunes 7 or later"
All the resolutions from this link http://support.apple.com/kb/TS1372 do not work
Anyone else have this issue?Am I just SOL?
-
CAnnot sync or restore my iPod
I lost my iPod last year and bought another one. I found the old one in my couch yesterday but I cannot sync or restore it.
Without more info like the current status of the iPod and what happens when you try to restore:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
"iTunes cannot read the contents of the ipod", How can I fix this?
Hello everyone, I am having trouble with my iPod touch 32GB and getting iTunes to detect it. I'm using Windows 7.
When plugging it in tonight, I got the message "iTunes cannot read the contents of the iPod (Name). Go to the summary tab in the iPod preferences and click restore to restore this iPod to factory settings". I attemped to do this, but I then got an iTunes error "3184" and was unable to install the iPod software.
I've tried...
- Using a different computer
- Using a different USB cable
- Rebooting the iPod
Nothing seems to work. I've read a solution as to delete one of the iTunes files on the iPod, but the iPod doesn't show up in my Windows Explorer, so I am unable to do this. The computer does however charge the battery when I have the iPod plugged in. I'm also able to still listen to music on the iPod as well.
One other note, I had the same thing happen to my previous iPod touch. I got my original iPod touch back in December 2010. In October 2011, the iPod just died one day and I was not able to turn it on at all or charge it. When I'd plug it into the computer, I got the exact same errors and was unable to restore the iPod. I sent it in to Apple as it was still under warrenty and they sent me a replacement. Now 3 months later it's happened again. Of course the warrenty starts from the day you purchase the original, so this is no longer under warrenty despite having it for only 3 months. The only difference this time is that the battery still charges and I can still turn it on and listen to music.
Any ideas?
Thankshi Angie!
hmmm. is there an Apple Store convenient where you can take the ipod for a check-up?
love, b -
ITunes Reports "iTunes Cannot read the contents of the iPod...."
This morning I connected my 2 week old iPod Classic to my laptop via the USB cable and iTunes came up and displayed a message saying "iTunes cannot read the contents of the iPod MHAM'S IPOD". It suggested a restore, which I have not tried yet. I have faithfully used the "Eject" function in iTunes to disconnect. After reading some other posts in the forums, it appears that others are having a similar issue. I'm concerned that this is normal operating behavior for this product. Given that this is my first Apple brand purchase, I'm a little turned off to the brand. Does anyone have a suggestion that doesn't involve me wiping this thing clean and starting over? And is this something that I should just expect? I ran a diagnostic and the results are below.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Latitude D620
iTunes 7.4.3.1
iPodService 7.4.3.1 is currently running.
iTunesHelper 7.4.3.1 is currently running.
Current user is an administrator.
The current local date and time is 2007-10-16 07:04:02.
Connected Storage Devices:
Disk drive, Hitachi HTS541080G9SA00, Bus Type ATA, Bus Address [0,0]
Disk drive, Apple iPod USB Device, Bus Type USB
Disk drive, RIM BlackBerry SD USB Device, Bus Type USB
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No IEEE 1394 Host Controller found.
The iPod Service Logging Information:
[SERVICE: 0xF88,06:40:36 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Tue Oct 16 06:40:36 2007)
[SERVICE: 0xF88,06:40:36 INFO] ##### iPodService starting as a service, version: 7.4.3.1
[SERVICE: 0xFD0,06:40:36 INFO] Adding iTunesHelper to session 0
[SERVICE: 0xF98,06:40:36 INFO] Got signaled to go ahead... Starting device manager!
[SERVICE: 0x114,06:40:36 INFO] Listener Window created
[SERVICE: 0x114,06:40:57 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:41:40 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:44:25 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:48:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,06:57:13 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,06:57:13 INFO] device is an iPod
[SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x114,06:57:13 INFO] [-1] set waiting to mount = 1
[SERVICE: 0x114,06:57:13 INFO] [1] Assigning session 0
[SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x114,06:57:13 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x114,06:57:13 INFO] [1] added device number 2 to m_objDeviceNumberMap
[SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #0 from src #0
[SERVICE: 0xEC,06:57:13 INFO] [1] input #0
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #1 from src #0
[SERVICE: 0x11C,06:57:13 INFO] [1] input #1
[SERVICE: 0x114,06:57:13 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0x114,06:57:13 INFO] looking up device # for \\.\F:
[SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x114,06:57:13 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x114,06:57:13 INFO] [1] set waiting to mount = 0
[SERVICE: 0x114,06:57:13 INFO] [1] input #2 from src #0
[SERVICE: 0x128,06:57:13 INFO] [1] input #2
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #3 from src #0
[SERVICE: 0x118,06:57:13 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x118,06:57:13 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0x118,06:57:13 INFO] [1] set waiting to mount = 1
[SERVICE: 0x118,06:57:13 INFO] [1] input #4 from src #0
[SERVICE: 0xEC,06:57:13 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:57:14 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
[SERVICE: 0x128,06:57:14 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x128,06:57:14 INFO] [1] input #3
[SERVICE: 0xEC,06:57:14 INFO] [1] input #4
[SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
[SERVICE: 0x128,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 INPUT #4] - (HDW) Interface Arrival
[SERVICE: 0xEC,06:57:14 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
[SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xEC,06:57:14 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xEC,06:57:14 INFO] VendorId: Apple
[SERVICE: 0xEC,06:57:14 INFO] ProductId: iPod
[SERVICE: 0xEC,06:57:14 INFO] revision: 1.62
[SERVICE: 0xEC,06:57:14 INFO] vendor bytes:
[SERVICE: 0xEC,06:57:14 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
[SERVICE: 0xEC,06:57:14 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xEC,06:57:14 INFO] [1] Power State: Powered
[SERVICE: 0xEC,06:57:14 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xEC,06:57:14 ERROR] Did not find first letter of stage
[SERVICE: 0xEC,06:57:14 INFO] got HotPlugState 0
[SERVICE: 0xEC,06:57:14 INFO] [1] serial number 000A27001547056B
[SERVICE: 0xEC,06:57:14 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
[SERVICE: 0xEC,06:57:14 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x118,06:57:14 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0x118,06:57:14 INFO] [VolumeArrive] mask = 0x7C
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\G:
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\F:
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x118,06:57:14 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x118,06:57:14 INFO] [1] set waiting to mount = 0
[SERVICE: 0x118,06:57:14 INFO] [1] input #5 from src #0
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\E:
[SERVICE: 0x11C,06:57:14 INFO] [1] input #5
[SERVICE: 0x118,06:57:14 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\.\D:
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x0 partition 0x3
[SERVICE: 0x118,06:57:15 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 INPUT #5] - (HDW) Volume Mount
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x11C,06:57:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:15 ERROR] Did not find first letter of stage
[SERVICE: 0x11C,06:57:15 INFO] got HotPlugState 0
[SERVICE: 0x11C,06:57:19 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x11C,06:57:19 INFO] [1] ===== iPod with Video =====
[SERVICE: 0x11C,06:57:19 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:19 INFO] 6:57:19, year 2007, day of yr. 288, GMT offset -20 isDST 1
[SERVICE: 0x11C,06:57:19 INFO] [1] progress is now 0
[SERVICE: 0x11C,06:57:20 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x11C,06:57:20 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x11C,06:57:20 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
[SERVICE: 0xF90,06:57:21 INFO] Getting iTunesHelper for session 0
[SERVICE: 0xF90,06:57:21 INFO] launching iTunes.
[SERVICE: 0x90C,06:57:25 INFO] <0x4> Got Serial #
[SERVICE: 0x90C,06:57:25 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:57:25 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:57:25 INFO] Mounted
[SERVICE: 0xFD8,06:57:25 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:25 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:25 INFO] Mounted
[SERVICE: 0x90C,06:57:25 INFO] [1] already mounted!
[SERVICE: 0x90C,06:57:25 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x90C,06:57:26 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:57:26 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:57:26 INFO] Mounted
[SERVICE: 0xFD8,06:57:26 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:26 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:26 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0x90C,06:57:27 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:57:27 INFO] Mounted
[SERVICE: 0x90C,06:57:27 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:57:27 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:57:27 INFO] Mounted
[SERVICE: 0xFD8,06:57:27 INFO] [1] already mounted!
[SERVICE: 0xFD8,06:57:27 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,06:57:40 INFO] Mounted
[SERVICE: 0xFD8,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:40 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:57:40 INFO] Mounted
[SERVICE: 0x90C,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] <0x4> Got Serial #
[SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] Mounted
[SERVICE: 0x90C,06:58:19 INFO] [1] already mounted!
[SERVICE: 0x90C,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0x90C,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:58:19 INFO] Mounted
[SERVICE: 0x90C,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] [1] already mounted!
[SERVICE: 0xFD8,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,06:58:23 INFO] Mounted
[SERVICE: 0xFD8,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:23 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:58:23 INFO] Mounted
[SERVICE: 0x90C,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:58:26 INFO] [1] input #6 from src #4
[SERVICE: 0x128,06:58:26 INFO] [1] input #6
[SERVICE: 0x128,06:58:27 INFO] [MACHINE 1 INPUT #6] - (APP) Unmount
[SERVICE: 0x128,06:58:27 INFO] [1] Begin...
[SERVICE: 0x128,06:58:27 INFO] [1] Mounted state
[SERVICE: 0x128,06:58:27 INFO] total locks = 1, caller = 296, caller locks = 1
[SERVICE: 0x128,06:58:27 INFO] [1] Begin Unmounting...
[SERVICE: 0x128,06:58:27 INFO] [1] progress is now 3
[SERVICE: 0x128,06:58:27 INFO] total locks = 2, caller = 296, caller locks = 2
[SERVICE: 0x128,06:58:27 INFO] Ejecting media
[SERVICE: 0x128,06:58:27 INFO] SUCCESS
[SERVICE: 0x128,06:58:27 INFO] Volume lock success!
[SERVICE: 0x128,06:58:28 INFO] total locks = 3, caller = 296, caller locks = 3
[SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW stop
[SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:29 INFO] [1] input #7 from src #0
[SERVICE: 0xEC,06:58:29 INFO] [1] input #7
[SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:29 INFO] [1] input #8 from src #0
[SERVICE: 0x11C,06:58:29 INFO] [1] input #8
[SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW took 625 ms
[SERVICE: 0x128,06:58:29 INFO] total locks = 2, caller = 296, caller locks = 2
[SERVICE: 0x128,06:58:29 INFO] total locks = 1, caller = 296, caller locks = 1
[SERVICE: 0x128,06:58:29 INFO] [1] Finished Unmounting with status 1
[SERVICE: 0x128,06:58:29 INFO] total locks = 0, caller = 296, caller locks = 0
[SERVICE: 0x128,06:58:29 INFO] [1] Ext app unmount request finished!
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:58:30 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x114,06:58:30 INFO] [VolumeRemoved] existing mask 0x20, arrive mask 0x20
[SERVICE: 0x114,06:58:30 INFO] [1] value = 1
[SERVICE: 0x114,06:58:30 INFO] [1] input #9 from src #0
[SERVICE: 0x128,06:58:30 INFO] [1] input #9
[SERVICE: 0x114,06:58:30 INFO] [InterfaceRemoved]
[SERVICE: 0x114,06:58:30 INFO] [1] value = 0
[SERVICE: 0x114,06:58:30 INFO] removed device number 2 from m_objDeviceNumberMap
[SERVICE: 0x114,06:58:30 INFO] [1] input #10 from src #0
[SERVICE: 0xEC,06:58:30 INFO] [1] input #10
[SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 INPUT #9] - (HDW) Volume Unmount
[SERVICE: 0x128,06:58:30 INFO] [1] progress is now 3
[SERVICE: 0x128,06:58:30 INFO] [1] Setting progress to 3
[SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Connected}
[SERVICE: 0x128,06:58:30 INFO] [1] *** UNMOUNTED - Sending event out, device session 0.
[SERVICE: 0x128,06:58:30 INFO] [1] !!!!! DoConnectStateAction() INTERRUPTED.
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #10] - (HDW) Interface Removal
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Unknown}
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 ACTIONS] - {Unknown}
[SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,06:58:30 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
[SERVICE: 0xEC,06:58:30 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
[SERVICE: 0xEC,06:58:30 INFO] [1] progress is now 0
[SERVICE: 0xEC,06:58:30 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #11 from src #0
[SERVICE: 0x11C,06:58:38 INFO] [1] input #11
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #12 from src #0
[SERVICE: 0x128,06:58:38 INFO] [1] input #12
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #13 from src #0
[SERVICE: 0xEC,06:58:38 INFO] [1] input #13
[SERVICE: 0x11C,06:58:38 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0x128,06:58:38 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0x128,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0xEC,06:58:38 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #14 from src #0
[SERVICE: 0x11C,07:02:24 INFO] [1] input #14
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #15 from src #0
[SERVICE: 0x128,07:02:24 INFO] [1] input #15
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #16 from src #0
[SERVICE: 0xEC,07:02:24 INFO] [1] input #16
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #17 from src #0
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #18 from src #0
[SERVICE: 0x11C,07:02:24 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x128,07:02:24 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
[SERVICE: 0x128,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,07:02:24 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,07:02:24 INFO] [1] input #17
[SERVICE: 0x11C,07:02:24 INFO] [1] input #18
[SERVICE: 0xEC,07:02:25 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:25 INFO] [MACHINE 1 INPUT #18] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x114,07:02:27 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 1
[SERVICE: 0x114,07:02:27 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
[SERVICE: 0x114,07:02:27 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x114,07:02:27 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x114,07:02:27 INFO] [1] added device number 2 to m_objDeviceNumberMap
[SERVICE: 0x114,07:02:27 INFO] [1] input #19 from src #0
[SERVICE: 0x128,07:02:27 INFO] [1] input #19
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #20 from src #0
[SERVICE: 0xEC,07:02:27 INFO] [1] input #20
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #21 from src #0
[SERVICE: 0x11C,07:02:27 INFO] [1] input #21
[SERVICE: 0x114,07:02:27 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0x114,07:02:27 INFO] looking up device # for \\.\F:
[SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x114,07:02:27 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 0
[SERVICE: 0x114,07:02:27 INFO] [1] input #22 from src #0
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #23 from src #0
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #19] - (HDW) Interface Arrival
[SERVICE: 0x128,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
[SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x128,07:02:28 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x128,07:02:28 INFO] VendorId: Apple
[SERVICE: 0x128,07:02:28 INFO] ProductId: iPod
[SERVICE: 0x128,07:02:28 INFO] revision: 1.62
[SERVICE: 0x128,07:02:28 INFO] vendor bytes:
[SERVICE: 0x128,07:02:28 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
[SERVICE: 0x128,07:02:28 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x128,07:02:28 INFO] [1] Power State: Powered
[SERVICE: 0x128,07:02:28 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x128,07:02:28 ERROR] Did not find first letter of stage
[SERVICE: 0x128,07:02:28 INFO] got HotPlugState 0
[SERVICE: 0x128,07:02:28 INFO] [1] serial number 000A27001547056B
[SERVICE: 0x128,07:02:28 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
[SERVICE: 0x128,07:02:28 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0xEC,07:02:28 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #21] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [1] input #22
[SERVICE: 0x128,07:02:28 INFO] [1] input #23
[SERVICE: 0xFD8,07:02:28 INFO] <0x4> Got Serial #
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x128,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,07:02:28 ERROR] Did not find first letter of stage
[SERVICE: 0x11C,07:02:28 INFO] got HotPlugState 0
[SERVICE: 0x11C,07:02:33 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x11C,07:02:33 INFO] [1] ===== iPod with Video =====
[SERVICE: 0x11C,07:02:33 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,07:02:33 INFO] 7:2:33, year 2007, day of yr. 288, GMT offset -20 isDST 1
[SERVICE: 0x11C,07:02:33 INFO] [1] progress is now 0
[SERVICE: 0xFD8,07:02:33 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:02:33 INFO] Mounted
[SERVICE: 0xFD8,07:02:33 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:02:33 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:02:33 INFO] Mounted
[SERVICE: 0x90C,07:02:33 INFO] [1] already mounted!
[SERVICE: 0x11C,07:02:34 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x11C,07:02:34 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x11C,07:02:34 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
[SERVICE: 0x90C,07:02:34 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,07:02:34 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0x90C,07:02:34 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,07:02:34 INFO] Mounted
[SERVICE: 0x90C,07:02:34 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,07:02:34 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,07:02:34 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0xFD8,07:02:35 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:02:35 INFO] Mounted
[SERVICE: 0xFD8,07:02:35 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:02:35 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:02:35 INFO] Mounted
[SERVICE: 0x90C,07:02:35 INFO] [1] already mounted!
[SERVICE: 0x90C,07:02:35 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xF8C,07:02:35 INFO] iTunes already running in current session.
[SERVICE: 0x90C,07:03:51 INFO] Mounted
[SERVICE: 0x90C,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,07:03:51 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:03:51 INFO] Mounted
[SERVICE: 0xFD8,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:03:51 INFO] <0x4> GetFormatType() returned unknown format 0
The iPod updater logging file cannot be found.I had this same exact issue happen to me this morning, and I lost 40 gigs worth of transferring in restoring it. I put a few albums on for the day, and when I tried connecting again this evening, the same thing happened. It hit me when it happened the second time that both times I had the iPod locked when it connected it to the computer. I'm pretty sure I've never accidentally connected it while locked before. My guess it that it is unable to read the content since the iPod is locked, and somehow this causes some sort of corruption that prevents it from seeing the files until a restoration is done. I would think Apple should be able to release an update which would detect if the iPod was locked and tell you to unlock it rather than to go through this process of losing all your music from the iPod. It scares me to think this could happen again simply if I am absent-minded in the future and forget to check whether it is locked or not before I connect it.
-
Error message: "iTunes cannot read the contents of the iPod."
I wanted to get my dad a new iPod for Xmas and transfer all his music from his ancient Classic. But when I connect to my MacBookPro, I get the error message: "iTunes cannot read the contents of the iPod." I see that 90% of the ipod drive is used, but I don't see any songs listed either on the iPod screen or in iTunes, which is worrying. Is there anything I can to save the music? He will be so upset that it's all gone...
My suggestions, when Restoring the iPod.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC.
Disconnect all other USB devices, except the mouse and keyboard.
Stop all other programs except iTunes.
Good Luck! -
Hi, please help me
When my iPod was 'preparing for update' my iPod USB accidently fell out. I turned it on and a usb sign and an arrow to iTunes came up, so I plugged it in. It comes up with a message saying iTunes has detected an iPod in recovery mode, You must restore this iPod before it can be used with iTunes. After that, I clicked restore and it said 'The iPod software server update could not be contacted' and that's it!
I've tired,
Resetting my iPod (the usb to iTunes sign still comes up)
Holding down the Home and Power button at the same time for many seconds
Restting my computer
Going into LAN settings and changing that
Please, I really want it too work as I just got it today for my birthday
Any help would be much appriciated, thank youYu can try here. However, other users been having the same problem so it may be due to a problem with the Apple servers.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
ITunes cannot read the contents of the iPod " my iPod's name ".
I'm having problems with syncing the 5th gen nano to iTunes 9 on my early 2008 MBP. I had one since September when they came out. It was fine for a while, but then I would get the error message: iTunes cannot read the contents of the iPod "<my iPod's name>". It got to where it was happening every other night or every night when I would try to sync. Of course it goes without saying that this makes the video camera unusable, since one can't count on retrieving the videos.
I talked with Apple Support on the phone. They were very good. Led me through a rescue-restore. This was described as more thorough than a normal restore. It involves a non-trivial button sequence. Also per suggestions I quit using a non-powered hub. I had been hooking both my iPod touch2 and my nano5 up to the hub to sync (not enough USB ports).
We tried the rescue-restore and things looked OK, but then a couple days later on the evening sync, the message came back. I should also mention that I use the pedometer feature in always-on mode, so of course that data gets lost as well.
I then went to the local apple store genius bar, and they saw the same error message I got when they plugged it in, so they decided to give me a new nano5.
I figured this was really it, but last night, on the second evening sync since the initial setup, the same error message is back with the new nano5. Feel bad because it now seems likely there was nothing wrong with my first nano5 (unless both are bad the same way - seems unlikely), but at the same time, I can't use any nano5 like things are now.
So now it's time for some detective work. I have both a nano5 and a touch2, and I use pedometer in always-on mode on the nano5. I wonder if those might be clues. Last night when the error occurred, iirc I had previously sync'ed the nano5 ok and ejected. Then I had sync'ed my touch2. I unplugged the touch2 and went to sync the nano5 again to update for some playlist changes, and that's when the error occurred. I wonder if iTunes is somehow getting messed up and thinking it is still dealing with a touch2, and it trounces the nano5?
It's probably a long shot, but I think I read someone else here with the same error message, and had a touch.
Any ideas, would love to hear. I'm planning to try only syncing the nano5 on a fresh start of iTunes for a while, and see if that prevents the problem.
Thanks,
JoeOK. How do I uninstall iTunes to reinstall it? Is there an uninstaller? Do I have to chase down plist files or other hidden system things I don't know about? Kind of a dumb question maybe, I've been on a mac at home for like five years now, but uninstalling apps is not something I need to do (that's a good thing).
So, yes, the problem happened again, with the new nano, on the second or third nightly sync (not sure how many days have gone by) since the plane to sync the nano first before the touch. Been using the right usb port also, in case that matters. Used to always use the left. The left port has a non-powered hub that has my time machine disk and a super-duper disk on it, along with an iLoc key. Tonight the two usb disks were not plugged in due to being in the process of be traded out for my other pair (I keep a pair offsite as well - backup-paranoid - but that's another topic).
Do you think it could matter what's plugged into the opposite USB port? Not the nano and the touch only go into the right port straight away - no hub.
Kind of a bummer, this. I hope we can figure it out. Thanks for helping...
BTW, I alway keep all my software up to date.
Joe -
ITunes cannot read the contents of iPhone/iPod Touch?
After following these instructions to update iTunes https://discussions.apple.com/message/21853130#21853130 , Whenever i connect my iPod Touch 5th gen i get this message:
iTunes cannot read the contents of the iPod “(my ipod name)”. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.
i click ok then iTunes says:
The software required for communicating with the iPod is not installed correctly, and you must manually eject the iPod before each disconnect. Please reinstall iTunes to install the iPod’s software.
I am NOT restoring my iPod as i know this is iTunes' problem. I went to the apple website and downloaded iTunes for mac and then installed it Installer said it was succuesful but after opening itunes i get the same problem. What do i do?
I WILL NOT DO ANYTHING IN TERMINAL. I never touch terminal and never will.Hi,
I've the same problem too.
I had made iPhone sync on my PC in the past. But my HDD went in trouble and I had to buy another and reinstall Windows, so I lost my iTunes library.
Having no sync was ok, since I was comfortable with the photos, applications and music in my iPhone.
But yesterday my iPhone went out of disk space, and my problem started. I then needed to sync. I tried to extract my paid applications from iPhone using "transfer purchases from my iPhone". Unsuccessful, since it did not copy every application. I've tried to download the applications again, but iTunes say I need to pay for them. And now, after some unsuccessful purchase transfers and backups, iTunes says "iTunes cannot read the contents of iPhone", so I think I'm forced to restore the original settings.
What should I do?
I don't want to pay again for the applications I already purchased.
I don't want to loose my application data.
I don't care about my music, photos and videos, cause I can get them elsewhere anyway.
Is there a way to save my iPhone, applications and data?
Thanks -
ITunes cannot read the contents of my iPod?
I wanted to put some new songs onto my iPod, but when I plug it into the computer, a message pops up; 'iTunes cannot read the contents of the iPod. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to its factory settings.'
I tried this, but when I connected my iPod to the computer again, the same message popped up. I have switched my iPod off and then back on, reconnected my iPod and downloaded iTunes again, but they all didn't work.
Does anyone know what to do?Reboot the computer
Try another USB port
Try aoterh cable
Try another computer to helpo determine if y have an iPod or computer problem
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
hi i just backed up my games in icloud on my ipod tuch 4. now i cannot bring them back to my ipod how can i do that thank you
Redownload the apps by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Synced media like apps and music are not included in the iPod backup that iTunes or iCloud makes. If you restore via USB/iTunes the apps have to be in the iTunes library in order to be restored. -
Problems Restoring 2nd Gen. iPod w/ iTunes 7
Hello. I recently noticed that my second generation iPod was skipping songs and freezing a lot. I decided to do a complete restore to see if that would fix the problems. I connected the iPod and (using iTunes 7) went to restore the iPod. Once it downloaded the latest version of the iPod software, iTunes said it was restoring the iPod. I figured it would take a while. So after about 40 mintues I figured it had frozen or something so I unplugged it with the intention of restarting the computer and trying it again. However I guess it was still working because now when I try and turn the iPod on all I see is the apple logo. The computer will sometimes recognize it however it states that "iTunes has detected an iPod that appears to be corrupt. You may need to restore this iPod before it can be used with iTunes." When I click restore it tells me there's an error and it cannot finish restoring. So in retrospect it was stupid to unplug it. Is there anything I can do at this point. It isn't under warranty or anything and there would be no point in shipping it off to Apple (for that money I could just get a new one). Any suggestions? Thanks.
-Sacha
PowerBook G4 Mac OS X (10.4.7)I have been having the EXACT same problem with my 3G, and it started with the iTunes 7, iPod updater 1.2 updates. Be aware that there are MANY others out there on this forum with the problems you are having... too many for me to believe that we all just happened to experience an iPod meltdown in the same way after the same iTunes update.
Anyway -- this morning I did a software update on my iMac, and now when I connected my iPod I did get the computer to recognize it. After reading that many others were having issues with the latest software, I did a restore on my iPod using the iPod updater from June of 2006, not the new one. (Try looking under Applications-Utilities-iPod updater to see if it happens to still be in your computer. If not, you can download it from Apple's site.)
I did successfully do a restore, but now I have connected to iTunes and am trying to reload all my music, and am not able to do so. It's stuck on one song, and I'm afraid to cancel it because this is what started my troubles a week ago.
But at least my computer recognizes that it is an iPod again.
I just wish Apple would post some solutions to this -- rather than letting more people like us download their bad software updates and kill their iPods.
Signed: a former Apple-lover hoping to regain the faith. -
Latest Itunes update does a restore to your Ipod and wipes out everything
The lates update did a restore to my ipod and wiped everything out pictures, songs, downloaded games, EVERYTHING and needless to say I am OURTAGED should have been a warning to tell you that this would happen!! All of my songs were not stored in my library because i did not want to overload my pc with music, and a lot of songs i got from friends. and the pictures were priceless NOW ALL OF IT IS GONE and theres nothing anyone can do to replace it I THINK THAT ITUNES SOULD HAVE DONE A BETTER JOB OF LETTING CUSTOMER KNOW ABOUT THIS! SO TAKE IT FROM SOMEONE WHO HAS BEEN BURNED BY ITUNES DO NOT DOWNLOAD THIS UPDATE!!
SIGNED MAD AS THE DICKENS IN VA.You cannot transfer song files from iPod to computer using iTunes (except for songs purchased from the iTunes Store). However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your new computer, you can add them to your iTunes library. Then, with "everything" in your iTunes Music library, you can sync to the iPod without risk of losing any songs.
NOTE: For any songs purchased from the iTunes Store, you can also re-download them at no cost, using the iTunes Store Purchased screen. Be sure to log in using the same Apple ID used for the previous purchases.
Maybe you are looking for
-
How to find the largest and the widest tables in Oracle 10g ?
Hi Folks, Environment: 10g Rel 2 Can somebody please suggest the data dictionary view(s) that I can query to get a list of the longest (rows) and the widest (columns) tables in any schema ? Thanks in advance rogers42
-
How do i copy phootshop from old hdd to new ssd
how do i copy phootshop from old hdd to new ssd?
-
%GT 'Document Currency Amount' takes care of automatic currency exchange?
We created a formula KF of %GT 'Document Currency Amount'. Let's assume we've got two records: 1st record with US dollars, 2nd record with Canadian dollars, then the KF column would show the correct percentage number for the %GT 'Document Currency A
-
Hi everyone,<BR><BR>Does anybody know if essbase Add-in version 6.5.5 will work togehter with Excel 2007? I really cannot find any detail on this.<BR><BR>Thanks in advance<BR>
-
Upload and attach documents within dialog programs
Hi I need to include an 'Add attachment" option on one of my screens. (I am busy developing a stand-alone labour relations system in R/3. The system is case number driven) The option should allow for the user to upload related documents which should