Cannot do Time Restore, stuck at blue screen

I wanted to do a time restore.
I put in the Installation disc to start up & press "C".
But it stuck at the blue screen. Now I cannot do anything except seeing the bluescreen & my installation disc remains inside !!
Any idea what shall I do next ?
Thanks

Kappy wrote:
Sounds like a bad disc or hardware problems.
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
Thanks Kappy.
Nothing of the above works because the system doesn't even recognize any keyboard entry. Basically, whatever I do, it just stuck at the Blue screen.
I have given up & have turn off the whole thing & unplug the socket, waiting to call Apple Care on Monday (why must the system always hang up on me on weekends when Apple care is closed?)
But I think the God must be crazy & playing jokes on me. When I woke up in the morning, I plug the socket back & turn it on. I have no scientific explanation for this, the system just back to normal in record time !!
After a while, I did an software upgrade to iTunes 9 & the system slowed down again. So, i did a FULL Time Restore to yesterday's date followed by upgrading to iTunes 9 & it is fine now.
Any logical explanation to this ?
Thanks

Similar Messages

Hi, Hi, Hi I have the old MacBook Pro. Upgraded to Mountain Lion which completely wrecked the system. So downgraded to Snow Leopard. The updated the combo update. Now stuck on blue screen at start-up. Need help. Greatly appreciated. Thank you.

Hi,
I have the old MacBook Pro. Upgraded to Mountain Lion which completely wrecked the system. So downgraded to Snow Leopard.
Then updated the combo update. Now stuck on blue screen at start-up.
Need help. Greatly appreciated. Thank you.

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

GE60 0NC-622UK laptop is stuck on Blue Screen can't login! please help..

Had this laptop for just one month, before it's all good. Windows 8 64bit.
In last two days, the mouse and touchpad became dysfunctional occasionally, able to move the pointer but just could't click on anything regardless of left or right, e.g. choose or open new. It would be working after logoff/relogin and reboot, but same problem still came up randomly.
Last night, I did the same thing to reboot the laptop after had the pointer dysfunction, but then it displayed a blue screen before the login with a error called 'System Thread Exception Not Handled', and then just stayed on this page would't reboot automatically (waited for 30 mins), so it left me no choice to shut it down by pressing power on/off button manually, afterwards with couple of times rebooting, it just kept going into this same blue screen and could't get into the system...Sometimes it would automatically start diagnosing before blue screen, ask me to restore or repair, but none of them fixed the problem, repeatedly stuck on blue screen every time...
And I don't have any windows 8 dvd, delivered box only has one for drivers and manual book.. so boot from dvd is not possible..
p.s. sorry about my english if caused confusion
thanks..

Quote from: Neoistheone2000 on 06-June-13, 00:26:05
Try starting Windows 8 in Safe Mode, its kinda difficult in Windows 8 to do you have to be very precise when doing it, right as the system boots you need to start spamming F8 sometimes you have to do Shift+F8.
You may want to disable fast boot in the BIOS so you have some time to get ready to hit the buttons, once you get the boot menu up try Start Up Repair first and see if it fixes anything then try booting, if noting then try safe mode and un-do anything you have done to the system recently.
Let me know how this goes.
Really appreciated your help!
I get into troubleshooting page by pressing F3 when laptop was booting up, and changed start up with Safe mode which works..I've done many things in Safe mode, like updated drivers, run anti-virus program, deleted recent installed software, and then somehow the blue screen error was gone after reboot...It seems one of them must be the cause for that problem.
Anyway, my laptop is working properly now, thanks a lot, if error happens again in future i might still need some help

MacBook won't start, stuck on blue screen

My MacBook is stuck on blue screen... forever....
MacBook info:
13.3in, 2.0GHz Intel Core2 Duo, 120GB HD, 2X1GB RAM with Leopard
MacBook was running great until last night... My screen got frozen while browsing, and force quit did not work. So I used power button to turned it off. After that, my MacBook won't boot up anymore... gray screen for about 3min, apple icon screen for 15min, then stuck on blue screen.
I think I've tried everything in here..
http://support.apple.com/kb/TS2570
The only command that I was able to use was "Reset the NVRAM / PRAM", but no change there...
I tried install DVD (came with the MacBook), but I cannot boot with DVD with C button and now the install DVD is stuck....
Is there any way to fix this? My warranty expired already, and I am trying to do everything before taking this to the store...
Thank you.

Thanks Eric.
I have tried that before, but I gave an another try. I held the option button longer this time, until I saw the apple icon. Then cd (DVD?) image came on, so I clicked on it. But after apple icon went away (10 min?), my macbook is again stuck on blue screen. I only saw cd image, and did not see any other drives... Is that a bad sign?
Thanks,
- Hidemi

10.5.3 won't install... stuck in blue screen loop

I chose to install it from software update. It told me to restart. I did.
I got hung up on a blue screen loop.
But no error messages or anything.
I had to hard reset.
Then started up fine- but system profiler shows I'm still 10.5.2.
And software update still shows the update as "downloaded".
If I click "install" it immediately asks me to reboot, and sticks in the blue screen loop again.
I have done this three times now.
If I choose restart from the apple menu- same thing.
So I decided to shut down- can't shut down. Get stuck in the looping blue screen.
So it seems like something is gumming up the shut down process. I've heard of startup items making things freeze- can the same thing happen when shutting down?
Not sure what the issue is.
The other people posting problems seem to be getting error messages, etc.
I am going to try to repair permissions, and if that doesn't work maybe I'll try the standalone installer- but why is this happening? this is like a 2 week old MBA with next-to-no third party stuff installed on it... what could be corrupted already?
fortunately I have backups if worse comes to worse...
Any other tips/thoughts?
Thanks!

Alexroet wrote:
should i try the standalone installer?
You could try, it's been known to sort system issues because it's fuller than the incremental "delta" update, so it should overwrite any files that are damaged or missing.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
But if you can't boot into Safe Mode something is amiss*. Since, you are able to use your system (not stuck on blue screen, try this first:
Go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
*EDIT: You do have to hold the shift key for Safe Boot until you see the spinning gear, just in case you didn't do that.
-mj
Message was edited by: macjack

Imac 8,1 does not boot stuck on blue screen

imac8,1 mid (2008) 20" stuck on blue screen after boot ,It starts in safemode, below is a list of thing i have check so far
1 Apple hardware test (says every thing is ok)
2 Disk utility repair (was successfull)
3 reset PRAM ,SMC
3 Boot for OSX dvd and reinstalled (still only starts in safe mode )
4 boot in single user mode and used fsck ( said every thing was ok)
Yet when i boot i get stuck on a grey/blue screen . it starts in safe mode though, Is there some EFI , firmware restore file that i can install ???
What else can it try????

Please closely follow Apple's advice in Gray screen appears during startup. There are a number of steps to take, be methodical and follow the directions closely.

Stuck at blue screen

It will load up after restart, passing the grey apple logo. When it looks like it's about to finish loading up Mac OSX it gets stuck at blue screen. Tried using Diskwarrior on it but it gets stuck in repair.

First thing to do in this situation is load the MacOS install disk, and reboot the system holding the C key down when you hear the chime until MacOS shows it is loading. This will not on;y show whether the system is basically sound and capable of booting, but also then give you the opportunity to run Disk Utility (in the Utilities menu of the installer) to check the hard drive for errors, and if any are found, attempt to repair them.
You'll need a wired USB keyboard (almost any will do, but NOT the Apple aluminium model) to boot to the installer.
When Disk Utility had finished the Repair Disk task, it if shows no faults, then you have a MacOS problem and likely need to perform an archive and install to set up a new copy of MacOS while preserving your files and applications. If Disk Utility shows errors it cannot repair, particularly reporting 'error on exit', it generally means the drive has suffered a problem. In those situations DiskWarrior is sometimes successful at recovery, though often a reformat is needed. In a small proportion of cases this problem is indicative of hardware failure - usually the hard drive itself, in which case a reformat would generally be expected to fail.
Be aware of course that reformatting the drive will wipe any and all data, so should not be done unless and until you have secured essential data.

Trying to install snow leopard-stuck at blue screen

I put disk in, computer restarted and am now stuck on blue screen.

Did you hold the C key down after the boot beep to boot from the installer dvd?
Is that a retail version of the dvd or did it come with you machine, or somewhere else? If it's the latter you cannot use it.

PowerBook Stuck at Blue Screen?

Hi there, I have a old Powerbook G4 15" thats having the common blue screen with cursor on startup error. Since then, Ive wipe OSX off and has been using Linux on this powerbook for some time and it works fine and i always though the blue screen issue is just a normal software issue. Recently, i decided to reformat it back to OSX 10.5, the installation went on smoothly and it completed without any issues. After rebooting, it stucks a the "blue screen with cursor" again. Heres what ive tried and some facts.
- Reseted PRAM
- Reseted PMU
- Reformatted the HDD
- Boot in Normal Mode and it stucks at blue screen v cursor
- Verbose Mode shows no signs of errors and it continues to blue screen n sits there.
- Boot in Safe Mode and it works
- Works perfectly fine with Linux
- HDD tested OK
- RAM tested OK
- Ran Disk Utility to check for permission errors.
- Tried removing Airport card.
- DVD drive removed (after installation)
- Was able to boot from 10.5 Installation DVD
- Can't do AHT (Apple Hardware Test) as i do not have the original DVDs
- Warranty is obviously over.
Does anyone has any suggestions for me? Thanks!!

15-inch PowerBook G4s with 1.5 and 1.67Ghz processors had a serious logic board fault that caused one RAM slot to fail. Use "About this Mac" to see if all the RAM installed is recognized, or remove one RAM module at a time and see it the computer runs properly on the other module.

10.6.8 update stuck on blue screen... 4 hours and counting

Upon selecting automatic software update my system seems stuck on blue screen with spinning grey gear. How long should I tolerate this (going on 4 hours now) before attempting to do something?
I can access the hard drive of this computer from others on my local network and am able to copy files from it. I'm wondering if I should try to grab all that is valuable to me before anything worse happens.
Advise?

If your data is not backed up copy any important documents you can from your Mac's startup drive.
Once you are done copying your data, use the power switch to turn off your Mac and disconnect everything except a wired keyboard/mouse and monitor. Start up in safe mode by holding the shift key down right after you hear the startup chime. Keep holding down the shift key until you see the Apple Logo and spinning gear.
Mac OS X: Starting up in Safe Mode Mac
OS X: What is Safe Boot, Safe Mode?
Safe mode will do some maintenance routines and checks/repairs the disk if needed so it will take quite a lot longer than normal to boot. Once your Mac boots restart normally. It will take a little longer than normal to boot but not as long as booting in safe mode.
If things don't work as expected install the Mac OS X 10.6.8 Update Combo

IMAC intel A1208 is stuck on blue screen after start-up. What is the fix?

IMAC intel A1208 is stuck on blue screen after start-up. How can this condition be resolved?

Please carefully read Apple's Gray screen appears during startup

Iphone 3g stuck in blue screen

iphone 3gs is stuck in blue screen....won't shut off, won't upload, nothing????

have you tried a reset?

G5 stuck on blue screen at set up point?

I've read other listings and they all have tried everything they know. I know nothing except to turn the computer on and off. Last night it worked then this morning it is jusst stuck at this start up point. I held in the button and turned it off and on again, got stuck at blue screen point again. I unplugged everything and still stuck? Please advise as I just spent hundreds adding this G5 to our system of g4's throughout the house and are looking forward to using it.
Thank You

Have you tried starting from your install disc and using Disk Utility?
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Please post back with results,

My mac book is stuck on blue screen with timer wheel

my mac book is stuck on the blue screen. What to do?

If you are running v10.6...
If you see a blue screen at startup
Helps to tell us which Mac OS X you have installed when you post for help. Thanks!

Macbook Pro (2010) stuck at blue screen on bootup

I recently wiped my hard drive and went to reinstall snow leopard on my macbook. It installed snow leopard, then it restored from my time machine backup I had. It booted up and asked me for a password. I didn't know the password to the account, because I never had one set up. I rebooted into the snow leopard install cd and reset the password. After rebooting, it gets stuck at the blue screen. I've tried to rewipe and reinstall twice so far, and don't feel like doing it a third time. I've repaired the disk, repaired the disk permissions. Anyone know how to make it boot up properly? Does the fact that my time machine backups are from lion screw anything up?

you really need to get the original disks. you can get them from apple for the cost of shipping. If the MBP is <1 year old, it is still under warranty.
You can try to boot it to safe mode: hold down the shift key while booting. If that does not fix it, then I would bring it to the Apple store or call Applecare. If the computer is <1 year old, but getting close, I would seriously consider buying Applecare to get the additional 2 years of warranty. If you are >1 year old, don't have applecare, and it is a logic board, it will cost you some serious $$$.

Cannot do Time Restore, stuck at blue screen

Similar Messages

Maybe you are looking for