Cannot download itunes. error message is run time error 6034
I cannot download itunes. the error message is run time error 6034. advices to contact application support team
Try the following user tip if you're still having the 6034 issues:
Troubleshooting issues with iTunes for Windows updates
Similar Messages
-
Question: I cannot successfully download itunes to my computer I have tried several times and every time after the download it says that I was unable to get the support piece and therefore cannot open itunes......please help.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I still don't understand why I get this error message; quicktime error 0
Pwscott wrote:
10. Update the video card driver.
check, latest Nvidia GeFroce9500GT driver installed, also tried previous version, no effect
After installing recent nvidia drivers you should then uninstall the nvidia stereoscopic 3D driver from Control Panel> Uninstall a Program. This has a known conflict with APE.
Cheers,
Neale
Insanity is hereditary, you get it from your children -
BPM Pattern Collect Message Mapping run time error
Hi,
I'm carrying out a replica of BPMCOLLECTMESSAGE Pattern from sap basis...
Doing a simple file to file scenario and simple mapping....
I'm getting a MAPPING RUNTIME error at the transform step.
kindly help in this regards..
The checks i'v made are...
1. Deleted all the work flow items from SWWL transaction
2.SXI_CACHE is 0
3.Payload cross checked.
Is there any solution please ???Hi,
On sending Stop message PE at technical details i get error stating : *com/sap/xi/tf/_BpmPatternCollectMerge_com.sap.aii.utilxi.misc.api.BaseRuntimeException:RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0~*
kindly look at the Trace error at PE
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">CL_XMS_MAIN->DETERMINE_EXT_PID: CENTRAL</Trace>
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS">
<Trace level="1" type="T">CL_XMS_MAIN->DETERMINE_EXT_PID: CENTRAL</Trace>
<Trace level="1" type="T">CL_XMS_MAIN->DETERMINE_INT_PID: SAP_CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">system-ID = PI2</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2009-03-17T04:35:42Z CET</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = D3370BB6DF244EA7356EECD16D0E6FAD</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC">
<Trace level="1" type="T">Queue name : XBTI0001</Trace>
<Trace level="1" type="T">Generated prefixed queue name =</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface BpmPatternCollectIfStopCollect</Trace>
<Trace level="1" type="T">select interface namespace http://</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Exception from packaging: No messages for constructing a package available.</Trace>
<Trace level="1" type="T">Continue single processing</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI2</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2009-03-17T04:35:42Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">>>>PID delete old pid determination coding</Trace>
- <Trace level="1" type="B" name="PLSRV_XML_VALIDATION_RQ_INB">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_VALIDATION-ENTER_PLSRV">
<Trace level="1" type="T">Reading sender agreement</Trace>
<Trace level="1" type="T">Inbound validation by Integration Engine does not take place</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOX0__0002</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Generated prefixed queue name =</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Exception from packaging: No messages for constructing a package available.</Trace>
<Trace level="1" type="T">Continue single processing</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI2</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2009-03-17T04:35:42Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">>>>PID delete old pid determination coding</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">No mapping required</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_XML_VALIDATION_RQ_OUT">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_PLSRV_VALIDATION-ENTER_PLSRV">
<Trace level="1" type="T">Reading receiver agreement</Trace>
<Trace level="1" type="T">Outbound validation does not take place</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface BpmPatternCollectIfStopCollect</Trace>
<Trace level="1" type="T">select interface namespace http://</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface BpmPatternCollectIfStopCollect</Trace>
<Trace level="1" type="T">select interface namespace http://</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</SAP:Trace>
Edited by: Robin on Mar 17, 2009 10:11 AM -
HT201413 When i try to use search in the itunes store , it says run time error R6025?
Change your store.
Open iTunes app - scroll to bottom - click on your Apple ID - View Account - enter password - change country/region -
Error message and run time is really slow-not responding
Hello
I am using Adobe Captivate 5 and have been bulding alot of training simulations over the past few days and have noticed that the system seems to be preforming worse and worse as the days go by. So I wondered if maybe there was a setting or something I'm not doing or doing to affect the preformance?
I have attached acouple of screen shots to illustrate what is happening.
Hope you can help.
Cheers
Heidi.There is some evidence that renaming the file can work but I prefer to open Captivate, select File > New Project > Project from Template and navigate to your current CPTL file. This will then create a normal CPTX file based on your template. I'd use this method just in case there are any issues that might bite you in the end from not doing things the way Adobe originally templates to be used. After you've done this, archive your template away somewhere just in case, and continue your project development using just the CPTX files.
-
Short dump Error-ABAP/4 Run time Error
Hi Expert,
Dump:ABAP/4 Processor:MESSAGE_TYPE_X Why this error came,I would like to Investigation on Perticular error,Please Some body give me an Exact answer,so that i closed the ticket.
Regards,
Raju.Hi Suresh,
What is the actual issue?
When did you get this error.
To know about this type of error, check below link...
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=dump%3aABAP%2F4Processor%3A+MESSAGE_TYPE_X&adv=false&sortby=cm_rnd_rankvalue
Also check this:
Note 1016317 - SP13:PC: Start type 'Date & time' gets scheduled wrong
"Process chain scheduling results in dump- ABAP/4 processor: MESSAGE_TYPE_X"
Solution:
In the short dump analysis, the process fails at function module
RSS2_PSA_NEW_OLD_DS
call function 'RSDS_DATASOURCE_SINGLE_GET'
Regards,
KK. -
Run time Errors GETWA_NOT_ASSIGNED at Time of Print Reports.
Hello hy All experts.
I ma trying to print Reports, but at time of preview i got an error message. Run time Errors GETWA_NOT_ASSIGNED.
Please Give me Solutions.
Thnks
Bhavesh Panchal.
BarodaFORM fetch_data.
break mtabap.
SELECT *
FROM vbep
INTO TABLE it_vbep
WHERE edatu IN so_edatu
AND vbeln IN so_vbeln.
IF NOT it_vbep[] IS INITIAL.
SELECT *
FROM vbak
INTO TABLE it_vbak
FOR ALL ENTRIES IN it_vbep
WHERE vbeln = it_vbep-vbeln
AND kunnr IN so_kunnr.
ENDIF.
IF NOT it_vbak[] IS INITIAL.
SELECT *
FROM vbpa
INTO TABLE it_vbpa
FOR ALL ENTRIES IN it_vbak
WHERE vbeln = it_vbak-vbeln
AND posnr = space.
SELECT *
FROM vbap
INTO TABLE it_vbap
FOR ALL ENTRIES IN it_vbak
WHERE vbeln = it_vbak-vbeln.
Select all Customer Data
SELECT * FROM kna1 INTO TABLE it_kna1
FOR ALL ENTRIES IN it_vbak
WHERE kunnr = it_vbak-kunnr .
SELECT *
FROM vbkd
INTO TABLE it_vbkd
FOR ALL ENTRIES IN it_vbap
WHERE vbeln = it_vbap-vbeln.
and posnr = IT_VBAP-POSNR.
SELECT *
FROM vbbe
INTO TABLE it_vbbe
FOR ALL ENTRIES IN it_vbap
WHERE vbeln = it_vbap-vbeln
AND posnr = it_vbap-posnr.
SELECT *
FROM vbup
INTO TABLE it_vbup
FOR ALL ENTRIES IN it_vbap
WHERE vbeln = it_vbap-vbeln
AND posnr = it_vbap-posnr.
SELECT *
FROM konv
INTO TABLE it_konv
FOR ALL ENTRIES IN it_vbak
WHERE knumv = it_vbak-knumv
AND kinak = space .
SELECT *
FROM vbrp
INTO TABLE it_vbrp
FOR ALL ENTRIES IN it_vbak
WHERE aubel = it_vbak-vbeln.
IF NOT it_vbrp[] IS INITIAL.
SELECT * FROM likp
INTO TABLE it_likp
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-vgbel.
SELECT * FROM lips
INTO TABLE it_lips
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-vgbel
AND posnr = it_vbrp-vgpos.
ENDIF.
ENDIF.
LOOP AT it_vbap.
itab-posnr = it_vbap-posnr.
itab-posar = it_vbap-posar.
ITAB-BRGEW = IT_VBAP-BRGEW.
itab-brgew = it_vbap-brgew.
itab-ntgew = it_vbap-ntgew.
READ TABLE it_vbak WITH KEY vbeln = it_vbap-vbeln.
itab-vbeln = it_vbak-vbeln.
itab-netwr = it_vbak-netwr.
itab-kunnr = it_vbak-kunnr.
READ TABLE it_vbep WITH KEY vbeln = it_vbap-vbeln.
itab-edatu = it_vbep-edatu.
READ TABLE it_kna1 WITH KEY kunnr = it_vbak-kunnr.
itab-name1 = it_kna1-name1.
READ TABLE it_vbkd WITH KEY vbeln = it_vbap-vbeln .
itab-bstdk = it_vbkd-bstdk.
itab-bstkd = it_vbkd-bstkd.
READ TABLE it_vbrp WITH KEY aubel = it_vbap-vbeln aupos = it_vbap-posnr.
READ TABLE it_lips WITH KEY vbeln = it_vbrp-aubel posnr = it_vbrp-aupos.
itab-delivery = it_lips-vbeln.
itab-lfimg = it_lips-lfimg.
READ TABLE it_likp WITH KEY vbeln = it_vbrp-aubel .
itab-lfdat = it_likp-lfdat.
itab-ntgew = it_likp-ntgew.
break mtabap.
READ TABLE it_vbup WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
itab-lfsta = it_vbup-lfsta.
READ TABLE it_vbep WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
itab-wmeng = it_vbep-wmeng .
itab-bmeng = it_vbep-bmeng.
READ TABLE it_vbbe WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
itab-omeng = it_vbbe-omeng .
READ TABLE it_konv WITH KEY knumv = it_vbak-knumv
kposn = it_vbap-posnr
kschl = 'PR00'.
ITAB-KBETR = IT_KONV-KBETR / 10. " CONDITION RATE
itab-kbetr = it_konv-kbetr.
itab-kwert = it_konv-kwert . "CONDITION VALUE
itab-pending_val = ITAB-OMENG * ITAB-KWERT .
itab-pending_val = itab-omeng * itab-kbetr .
APPEND itab.
ENDLOOP.
ENDFORM. "data_retrieval
*& Form build_listheader
text
-->IT_LISTHEADER text
Show quoted text -
FORM build_listheader USING it_listheader TYPE slis_t_listheader.
DATA HLINE TYPE SLIS_LISTHEADER.
DATA: ls_line TYPE slis_listheader.
bhavesh
HLINE-INFO = 'report Developed by Bhavesh'.
HLINE-TYP = 'H'.
Header
Bhavesh
CLEAR ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = 'Sales ORDER Report'.
APPEND ls_line TO it_listheader.
bhavesh
***Selection
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'Key 1'.
ls_line-info = 'SFEL'.
APPEND ls_line TO it_listheader.
ls_line-key = 'Key 2'.
ls_line-info = 'SFEL'.
APPEND ls_line TO it_listheader.
***Action
CLEAR ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: not used for this type
ls_line-info = 'Status list'.
APPEND ls_line TO it_listheader.
ENDFORM. "BUILD_LISTHEADER
*ENDFORM. "build_listheader
*& Form display
*& text
FORM display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = alv_layout
it_fieldcat = i_fieldcat
it_events = gt_events[]
i_callback_user_command = 'USER_COMMAND'
i_grid_title = 'BHAVESH REPORT'
TABLES
t_outtab = itab[].
CLEAR : itab .
ENDFORM. "display
*& Form top_of_page
text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader[].
i_logo = 'ENJOYSAP_LOGO'.
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE -
XL reporter 2005: Run time error 430
Hi,
When launching XL reporter 6.80.01.25 the following error message appear:
"Run time error 430
Class does not support automation or does not support expected interface."
Please advice.
Regards
Thomas LaiHi Thomas,
We had exactly the same problem when upgrading to patch 25. I think it's a bug in that patch. We got around it by uninstalling patch 25, rebooting the workstation and then reinstalling patch 25 again (...not sure if the reboot made any difference but I thought I'd mention it anyway). The program then worked ok. Very strange!!
Hope this helps,
Owen -
WAD: Crashes with Run Time Error '339': Component 'formx.ocx' (missing)
when using SAPGui 7.10 --> BW3.5x Web Application Designer the
application fails to start and we get the following error message.
Run Time Error '339': Component 'formx.ocx' or one of it's dependencies
is not correctly registered: a file is missing or invalid.
This works correctly on some machines but on others we get this error
message. We have applied the latest patch.
I suspect some non-sap software component has damaged my installation. How can I debug this? Re-installing SAPGUI doesn't do any good.
Any ideas gratefully received.Check the following link. Is your issue related to this???
Re: Error in WAD -
Since updating to firefox 15. whatever and now 16.0.1, i have been unable to open up any email attachments in my aol email account. I am able to view them via internet explorer. Initially the attachment will open (i can see it) but then a message of "run time error" comes up and when I close that window, the document goes blank. Also, today I clicked on a link via an aol news story and the same thing happened. It went to my firefox downloads, I was able to see part of the document and then that window with "run time error" message in it popped up. Help!!!!
This is a tip I got from ehow.com:
"While less common in Firefox, runtime errors can still occur on that browser. To prevent it from happening again, merely uninstall and reinstall Firefox on your computer." -
Run-time error SAPSQL_ARRAY_INSERT_DUPREC occurred
When creating a new SyncBo (T51) instance after syncing eventually MI Clients shows the following message:
[20070315 01:28:14:343] E [MI/Sync ] Received exception info code 10 and detailed message "Exception while callSync: The ABAP/4 Open SQL arrayinsert results in duplicate database records. records in the data base."
In sm21 shows message:
AB0 Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
AB1 > Short dump "070316 205056 sapnw ELDA " generated
Looking for SAPSQL_ARRAY_INSERT_DUPREC error in SAP Note we found the note 817849 (Runtime error SAPSQL_ARRAY_INSERT_DUPREC occurs during sync).
We have downloaded and applied this note in Backend as note requires and ALL prerequisites of this note. Also we have upgraded to SP19 and Kernel to 155 (part 1 and 2). But problem continues and the client that happened this problem does not work any more, all new SyncBO instances created goes to MEREP_MON as Waiting status.
The dump on duplicate record is happening when the user is synchronizing and when a record is getting inserted to table merep_10100.
The solution /workaround could be to do a client reset for those devicesand test again and see if it is happening, but error returns happening after this.
When this happen SyncBo instance keeps on Waiting status (MEREP_MON). We couldn't understand why this happen suddenly and then no more new SyncBo could be created, all goes to Waiting status. Reprocess (ShiftF5) or start handler (Shift10) does not take any effect.
Best Regards,
RogérioHi Ajith
I am getting the same error and below is the error message from ST22. The only change is I am using for MTR application and the sync fails for the 2nd time when synched for patches for the MTR application. As it is generic sync, could you please advice to get rid of the problem.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"LOG_INSERT_DB" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Thanks, Raj -
Hello,
When I try to Log-on to BI Publisher via MS Word I get the message VB run-time error '13', type mismatch. I just upgraded to BIP 10.1.3.4.1 but I was having getting the same error before I upgraded.
Any idea what this error means and how to fix it?
Thank you,
TammyI'm still searching for a solution to this problem. Based on suggested solutions to similar threads in the past, I have uninstalled and reinstalled BI Publisher, I have uninstalled Visual Studio and I have the patches installed that appeared to resolve other people's issues (from threads 2 years ago). I am at a loss on what to try next.
BIP experts, any ideas?? -
Template Builder not found followed by Run-time error '429'
Hello,
I am having problems with BI Publisher.
I am running the application on a Windows 2003 server via a Citrix connection using Word 2007 (SP2) (multilingual French/English). On this forum, I have seen numerous threads about this type of error but none seems to be working for us.
Symptoms:
I installed BI Publisher with admin rights (account A) and it works fine using this account
I copy the TBCrosstab.dot, TemplateBuilder.dot, WordAnalyzer.dot in another User Profile "%USERPROFILE%\Application Data\Microsoft\Word\STARTUP" (Account B)
All macros are enabled in account B
The Add-ins menu shows but when I click on Connection I get the Template Builder not found error followed by Run-time error '429'
I uninstall BI Publisher from Account A and install it using account B
It now works fine with account B but I get the error messages in account A...
Does BI Publisher work using multiple accounts on a single machine?
ThanksDid you find a solution to this problem?
-
XL Reporter Run-time Error '429' ActiveX component can't create object
Hi Everyone,
When trying to install XL Reporter on a Windows 2003 Server SP2 machine getting the following Error:
XL Reporter
Run-time error '429':
ActiveX component can't create object.
Did anyone get this error? Please advise of any steps we can try to resolve.
Kind Regards,
KafilDear Friend,
I had described the problem to our technical support team, and they replied as follows u2013
They solved the Script related error by several stages.
They checked the machine for any mal-ware existence by the tool provided by Microsoft (MS Mal-ware remover).
Then they tried by installing the following patches from Microsoft u2013
http://support.microsoft.com/kb/949140
Windows Script 5.7 for Windows XP
http://www.microsoft.com/downloads/details.aspx?familyid=887fce82-e3f5-4289-a5e3-6cbb818623aa&displaylang=en
Windows Script 5.6 for Windows Server 2003
http://www.microsoft.com/downloads/details.aspx?FamilyId=C717D943-7E4B-4622-86EB-95A22B832CAA&displaylang=en
Windows Script 5.6 for Windows XP and Windows 2000
The internal matter to this problem was about the following DLL and its version u2013
C:\WINDOWS\system32
vbscript.dll
5.5.0.8820
Desired
5.6.0.8820
Check, if the information helps you.
Maybe you are looking for
-
Why won't my iPhone work after latest iTunes update on Windows XP?
Not the most technically savy guy. Tried to sync my iPhone on my computer like I have plenty of other times before, but got a warning message saying that the hardware that I was attempting to install has not been verified through Windows XP (or somet
-
Confirmation with Serial Number
Hi all, Can anyone explain what's the purpose and how it works with confirmation with serial number? I already do customizing for one single entry confirmation to make serial number appear on CO11n. regards, Arman
-
My iChat video conference seems to be malfunctioning.
Every time I want to send a picture to the video conference, all I see is a black screen. Who ever is on the video chat with me also sees this black screen instead of the picture. I've tried to send differnet pictures, restarting iChat, restarting my
-
Chinese input w/PenPower on Intel Mac
Hello, I've finally convinced my father-in-law to switch to the Mac. The only hangup seems to be the fact that he uses a writing tablet as his input method for Chinese. After several searches, it seems that the PenPower Handwriter is the only Mac opt
-
I can't get some PDF to read out loud. Any idea why? I am able to select and copy the texts so it's not an image for sure. If I paste the texts to word or some other app, I can use the text to speech from my Mac OS to read out loud and it's working f