Cannot download RAW files from Nikon D800E into CC Photoshop?

This is not the same question you posted earlier:
"I am having difficulty transferring D800E NEF files into Adobe RAW format to use in Photoshop CC? What to do?"
Perhaps give steps you are trying.

Similar Messages

Import Raw files from Nikon D7000 into Lightroom 3

If I understand correctly I must upgrade to Lightroom 4.3 or get a converter in order to import my Raw files from Nikon D7000 into Lightroom?
Not sure if I understand it correct? Which is the best way?

I use LR 3.6 with the latest updates for camera raw for this version, I believe it's 6.7, and my D7000 and its NEF's were correct handled.
Did nothing else as install the program, update every time there was an update and in September when I bought the D7000 LR worked fine with his NEF's. Before I had a D40x which was als correctly handled.

Why won't elements 12 download raw files from Nikon D810?

Why won't elements 12 download raw files from Nikon D810? I got a message saying that the camera model is not supported by installed version of camera raw. How do I fix it?

mydogmaksim
Photoshop Elements questions should be posted in the Adobe Photoshop Elements Forum. Somehow your thread got posted in the Adobe Premiere Elements Forum (video editing).
You can re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
My opinion on this....from the Photoshop Elements perspective...
Nikon D810 is supported by Camera Raw 8.6 and higher (latest version of Camera Raw is 8.7)
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
At the same time, the Camera Raw version needs to be supported by the Photoshop Elements version.
Photoshop Elements 12 appears to support Camera Raw up to 8.5 which does not support the Nikon D810.
Camera Raw-compatible Adobe applications
Solution...
a. switch to Photoshop Elements 13 (comes with Camera Raw 8.6 and can be updated to 8.7).
b. use the DNG Converter in Photoshop Elements 12
ATR

I just began month trial of cs6 & cannot open raw files from nikon 600?

I just began month trial of cs6 & cannot open raw files from nikon 600?

Have you updated your Photoshop to get the latest Camera Raw update patch? If not go to:
Help >> Updates
This should get you the necessary updates for your camera assuming it is not "too recent".
Good luck and post back.

Updates for raw files from Nikon D5000 on a photoshop elements 7 /windows 7 system

I have photoshop elements 7 but it won't open raw files from a nikon D5000 although I've followed the links and updated. It still says it won't open because it's the wrong type of file..I've downloaded a DNG converter but still nothing is happening.

You download and installed the camera raw 5.6 plugin, by following install directions on the following page?
Adobe - Photoshop Elements : For Windows : Camera Raw 5.6 update
If you have a windows 7 64 bit system, then the Camera Raw.8bi plugin goes in
Program Files (x86)\Adobe\Photoshop Elements 7.0\Plug-Ins\File Formats
(the path adobe gives is for a 32 bit windows system)
Also, use the Camera Raw.8bi outside the folder named Win64

Cannot load a RAW file from Nikon D7200 into Elements 9!

trying to open a RAW (NEF) file from my Nikon D7200 into Elements 9 (version 9.0.3) and I get the message that "cannot open because it is the wrong type of file". Can some one help me? I have the RAW 6.5 plug-in installed

Hi,
The D7200 requires Camera Raw 9.0 which is not compatible with PSE 9.
You either need to upgrade to PSE 13 or use the free Adobe DNG converter which can take the NEF files and convert them to DNG files. The DNG files can then be processed by PSE 9.
DNG Converter 9.0
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5882
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5883
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuih
This assumes that you are not on an old operating system which is not supported.
Brian

Cannot import RAW files from Nikon D70

I have an iMac G5 running Leopard 10.5.2. When I try to import to iPhoto '08 from my Nikon D70, I get a message that says "The volume for DSC-xxxx.NEF cannot be found." The program then stalls and I have to force quit to get out of it. This happens whether trying to import photos from a card reader or from a desktop folder. I've tried re-installing both iPhoto and NIkon software to no avail. Any suggestions?

tervguy
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I'm having troubles converting my raw files from Nikon D5200 (NEF) to DNG. I tried using Lightroom 4, but it didn't identify the folder containing the files. So i downloaded the latest DNG converter but that too didn't identify the files kept in the folde

I'm having troubles converting my raw files from Nikon D5200 (NEF) to DNG. I tried using Lightroom 4, but it didn't identify the folder containing the files. So i downloaded the latest DNG converter but that too didn't identify the files kept in the folder location. So I downloaded DNG converter v7.3 for D5200. It identifies the folder and files; but it is giving me parsing error on trying to convert files. I'm running Windows Vista Home Edition SP1. Kindly advise. Thank you.

I probably missed this detail in what you’ve posted, but do you see the thumbnails of the three cameras’ raw files in Finder if you don’t convert to DNG?
What has happened in the past is that the Apple raw interpreter doesn’t read thumbnails of DNGs it doesn’t like, where at least one thing it didn’t used to like was embedded lens corrections for mirrorless cameras. Are the Olympus and Panasonic mirrorless—meaning there is no optical viewfinder and everything is seen on an LCD screen or perhaps an electronic view finder? If so the reason these are different is that the camera is doing the lens distortion corrections automatically and this information is stored in the raw files and in the DNGs but Apple doesn’t know how to use these embedded lens corrections or doesn’t know how to read the newer DNG spec that does allow for this information to be embedded in the DNG, at least.
Apple could just extract the embedded jpg preview and ignore the other parts of the file it doesn’t understand, but it apparently doesn’t do this.
What I’m not sure about is if the Apple raw interpreter still has this problem or if you’re on an older system without the latest updates for camera raw decoding by Apple.

Am useing a PC. Have Photoshop CS5, suddenly cannot move Raw files from bridge (or anywhere else) into photoshop. Jpeg move into photoshop ok, did get error message 1 what do I do to correct this om bridge (or anywhere else for that matter)

Useing a PC
Have Photoshop CS5
Suddenly cannot move Raw Files from Bridge (or anywhere else) into photoshop.
I Can move Jpegs into ps the only issue is with Raw files
I did get error1 message but as do not know what that means its no help
any suggestions?

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

How to work with raw files from Nikon D600 in Lightroom 3

I need to know how to process my raw files from my Nikon D 600 camera in Lightroom 3.6 and Photoshop 4?
Message title was edited by: Brett N

Support for the D600 was added in Lightroom 4.2.
Updates are no longer released for Lightroom 3. The final update, 3.6, did not support the D600, so you cannot open raw files from this camera natively.
You can use the DNG Converter to change your NEF files into open source DNG files that will open in any version of Lightroom, including 3.

I have Elements 9 and cannot download NEF files from my new Nikon1 v1, any help appreciated

I have Elements 0 and cannot download NEF files from my new Nikon1 V1, any help is appreciated.

PSE 9 is too old for any of the versions of ACR that support the 1 V1. You have three options:
1. Upgrade to PSE 10 or 11.
2. Use the Nikon software to convert the raw files and send the resulting tiffs to PSE for further editing.
3. Try the free Adobe DNG converter, and you should be able to open the resulting DNGs in your version of ACR.
Windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5486
Mac:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

Photoshop CS5 will not open raw files from Nikon D810. What do I need?

Photoshop CS5 (bought in 2011) will not open raw files from Nikon D810 (bought in 2014). Is there a patch? Is there something I can do?

YAY!!! Success. Thanks Jim. I have the raw file for this image. ABC OPEN: Dancing water spouts in severe weather I'm such a noob, I hadn't even set up the correct date on the camera.
ABC OPEN: Dancing water spouts in severe weatherFran McFadzen captures a once in a lifetime photo of two dancing water spouts near Rockhampton.
View on open.abc.net.au
Preview by Yahoo
From: JimHess <[email protected]>
To: Fran McFadzen <[email protected]>
Sent: Monday, 26 January 2015, 10:20
Subject: Photoshop CS5 will not open raw files from Nikon D810. What do I need?
Photoshop CS5 will not open raw files from Nikon D810. What do I need?
created by JimHess in Adobe Camera Raw - View the full discussionThank camera requires Camera Raw 8.6 which isn't compatible with Photoshop CS5. But you can download DNG converter 8.6 or newer and create digital negative (DNG) copies that will be compatible with Photoshop CS5. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7130665#7130665 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7130665#7130665 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Camera Raw by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Raw Files from Nikon D600

What can't I open my raw files using Photoshop Elements 10?

To open a raw files from Nikon D600, you need Adobe Camera Raw version 7.2 or above version. See the link below. It states the cameras supported in different version of Adobe Camera raw:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
But in PSE10, I am afraid, this version is not available:
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows
You can check the ACR version installed from Elements Editor.
If you are on Windows, go to Help> About Plugins > Adobe Camera Raw.
if you are on Mac, go to Photoshop Elements Editor> About Plugins > Adobe Camera raw.
What you can do now?
Download and install the free Adobe DNG converter to convert your files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your original files as backup).
Windows download : http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519
Mac download: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518
You can convert a whole folder of images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Can't open raw files from my D800E in CS5. What is the fix for this?

How do I fix this problem? Can't open raw files from my D800E in CS5.

You could try Help > Update, but that was a flakey process in CS5 times.
It's better to download and instally manually.
Windows
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5603
Mac
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5370&fileID=5003

Elements 11 will not recognize raw files from Nikon D610

Elements 11 will not recognize raw files from Nikon D610. I have downloaded ACR 8.2 and DNG converter to no avail! Any suggestions? It does recognize files from my D600.

Support for the D610 was added in the latest release candidate version of Camera Raw, 8.3 RC. You will need to install that version or wait until it is officially released. Your choice.

Cannot download RAW files from Nikon D800E into CC Photoshop?

Similar Messages

Maybe you are looking for