Cannot edit any pages - No Edit Page Button

I have a blog through blogger, with my own domain, standupsteals.com. I have added a connection to it in CS5, but I have been unable to edit retrieved posts. The "Edit Pages" button doesn't even appear. I haven't tried to uninstall/reinstall yet. I did delete the connection, and recreate it, but still same problem. I cannot administer websites; it's grayed out, along with a lot of other options. I am the only user, so I shouldn't be locked out...Any ideas?
I have tried to follow the simple directions...Go to my homepage; choose an entry. Once I choose an entry, Edit Pages button should appear, right? It's not happening for me...I get a quick message that says I am on a site I am not connected to. How can that be?
When I try to edit a page from within IE, I get an error "Cannot find the file on the server" Message was edited by: ladeebishop

Hello Alpesh,
Thank you for replying!
I had already tried to export the roles and replaced the Z: with Z_ before creating this message, but the upload attempts failed due to the explanation above.  But this time, I followed your (good) advice to delete the original Z: roles first, before uploading the corrected file.
Sadly, even after I deleted the original Z: roles prior to uploading the corrected file, I am still having no luck ... when I uploaded the file, again it (falsely) reports that the import was successful:
    Import Status: 133 successfully imported out of 133 records found
After seeing that message, I quickly checked the roles, and none of the roles had uploaded.  So now I have ZERO roles.
Any further ideas?  I am thinking it may be something very small that is being overlooked ... perhaps certain buttons must be selected/not selected on the import screen?  Or could it be an issue with the file itself?
When I do the import, I only select the button for "From File ..." and retrieve the file from my desktop via the Browse button.  I do not select any other button, nor do I make a selection from the System or Role Source boxes.  I have just selected that one button only ... I've tried it with and without checking the "Overwrite Existing Roles" box, but neither one works.
The part that bugs me the most is that I receive what I perceive to be an inaccurate/bogus "successful" status each time I attempt the upload of the file.  At least if I had an error message, I might have something to work with to troubleshoot this.

Similar Messages

  • I cannot open any of my podcast pages in my library.All get is a "Whats New" message which I cannot remove.Clicking on the tabs (eg lists) has no effect.I am still using Windows XP. Any ideas guys?

    My podcast page in 'My library' does not show. I have "What's New" message but can't access/play podcasts from the page so unable to play on laptop.I still get automatic downloads of new podcasts and transfer to my ipod. It is just that I cannot play any of them on the laptop as "Lists" or "My podcasts" cannot be viewed, only the "What's up" message, so just cant access any newor old on my laptop screen. Any help would be welcome.Thanks.CJ

    I had the same problem. User J_toms posted the solution here:
    Re: How to turn off what's new screen on Podcast page?
    Worked for me!

  • SSRS 2012 - Cannot access any of the sub page from Report Manager - Manage page menus.

    All:
      It was working at one point of time, but suddenly when I tried to access any of the menus from Report Manage page, all the options (Data Source, Subscriptions, Processing Options, Cash Refresh Options, Report History, Snapshot Options, Security) will
    redirect back to the root directory page.
      Because of this problem, I cannot manage any of the options or subscriptions for any of my report on the server.
      Does anybody know what could be the problem? Thank you very much for your help.
    Tina

    Hi Tina,
    As per my understanding, I think this strange issue can be caused by the browser which running Report Manager and the page files may be corrupted which are related to manage properties in Report Manager.
    As to the browser, if you use IE explorer to run Report Manager, I suggest that you can try to run it in compatibility mode. If you are using another browser, I recommend that you should use IE explorer to run Report Manager to check the issue again.
    Another possibility is related to corrupted page files. If in this scenario, I suggest that you can try to copy the all Pages folder from another server which works well to replace the current one. By default, the Pages folder is located in the following
    folders:
    C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportManager
    Besides, if this issue still exists, you can go to Reporting Services Log Files to see if there are error messages. Then it may help us make further analysis.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Flash not working on Windows 8.1, 64 bit, Flash Player 15 it is so bad I cannot use any browser or web page including Adobe, it has taken me an hour to get here

    I have Windows 8.1, 64 bit, Flash Player 15, and use Firefox browser, Flash Player keeps crashing on every web page including Adobe, I cannot play games, this is a screen shot of the problem
    I have done all the FAQ's disabled hardware acceleration, cleared caches, etc, etc, it is so bad that I cannot browse the internet or play game unless I want to spend hours trying to get 30 mins browsing or gaming

    I have Windows 8.1, 64 bit, Flash Player 15, and use Firefox browser, Flash Player keeps crashing on every web page including Adobe, I cannot play games, this is a screen shot of the problem
    I have done all the FAQ's disabled hardware acceleration, cleared caches, etc, etc, it is so bad that I cannot browse the internet or play game unless I want to spend hours trying to get 30 mins browsing or gaming

  • Safari cannot load any Google Sign in pages

    I'm on a late 2011 Macbook Pro 13" running 10.10.2 with Safari 8.0.3. My internet connection is fine, and I have no problems in any browser but Safari.
    Safari will load any webpage fine, until I try to access a Google page that requires logging in. This includes accounts.google.com, mail.google.com, calendar.google.com, etc. Google search loads fine.
    I've tried clearing cookies/cache, completely resetting Safari, resetting my keychain, and double-checked my DNS settings. Nothing has made the progress bar move. I've of course restarted countless times as well.
    The problem arose when I tried to install the desktop version of Google Drive. Once installed, it displays a blank window as the sign-in page, and won't let me do anything but close it. I found a ton of similar issues on Windows and IE causing Drive's problems there, so I'm thinking this is a Safari issue at heart (or maybe Keychain, since it all routes through there apparently too).
    Does anyone have any other suggestions?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • When I edit any contacts, my edits are not saved. Why?

    Any changes to my contact list (when I update email address changes, or phone numbers/postal addresses etc) the edit appears to have worked, but as soon as I back out of my address book, the change has not saved. Any ideas?

    https://support.mozilla.org/en-US/questions/996474#answer-561758

  • I recently upgraded to Yosemite.  Now in my Pages documents I cannot select/edit any objects or images.  Help Please!

    I just recently updated my MacBook Pro to Yosemite 10.10.2
    I also updated my "Pages" when asked to.
    Now when a open any of my Pages documents, I cannot select/edit any of the objects/images in those documents.
    I have gone through the "Pages" help but still cannot solve the problem. 
    There used to be a "make background objects selectable" button, but I can no longer find it.
    I have tried the "arrange tab" > section masters > make master objects selectable, but nothing happened
    Any suggestions

    Hello Kappy,
    I checked out your link and I remember the import box popping up when I upgraded from iWork to Pages a few years ago.  My problem is with all files (even documents created with "pages" last week.  The documents open fine, I just cannot select/edit the objects/images in the background of my documents.  Yes, I have tried going through all of the tab menus and layout options and tried "pages" help.
    So my problem is that I cannot open documents and adapt them to my next lesson, etc.
    Anyone else have any suggestions?

  • Pages table cannot be edited any more

    I have quite a large Pages document which is essentially a journal for each day of the week.  Each day has 2 tables in it.  One of them cannot be edited any longer going back to much earlier in the document.  The other table is OK.  Both tables are only 5 or 6 rows and never larger than 1 page.  This has suddenly happened. 
    Just preceding this the Pages document could not be opened from either the current or backup file from a few minutes ago.   The message just said 'unable to open pages document', not very useful really.
    I retrieved a version from yesterday using time machine, but as I said above one of the series of tables cannot be edited any more.
    I am Using Lion - recently upgraded I am sorry to say as this is one of many issues. 
    I am using Pages version 4.1 (923)
    The pages document is 132 pages long.

    ericfromth wrote:
    I'm using OS .8.1.2. If i try to use the CLEEN app, when I start to empty the trash, it says "Your photos haven't been deleted either because you didn't allow the action,or some of the photos are in shared photo streams."
    What cleen app, funny you made no mention of that in your original post.

  • I need to secure a pdf so it cannot be edited, except for the first page.  Is this possible?

    Can you secure all but one page of a pdf?  I would like the first page to be able to be edited, but the rest of the document to be protected from editing, is this possible?  If so, how?
    c

    What do you mean by editing PDF? If you have a PDF form and want to make some form fields, in your case pages other than the first page, non-editable, you can lock the form fields on all pages other than first. You can write a JavaScript that does that, include it in the original PDF form and activate it at some point in time (like when a certain button is clicked, or certain form field gets focus). If you mean other ways of editing, like changing text on a page, you cannot protect only part of the document from that.

  • Is there any (easy) way to use Pages to edit documents imported via iFiles?

    Is there any (easy) way to use Pages to edit documents imported via iFiles?

    That is a question better answered by the developer:
    http://www.ifilesapp.com/
    Peter

  • Duh.. cannot open calendar page to edit it.  What key option works??? Thanks

    Duh.. cannot open calendar page to edit it.  What key option works?? 
    First time in 20 years with Mac I am asking this kind of question.
    Thanks

    Found it>>> return and both mouse keys !!!!????????

  • Is there any way to edit the standard Firefox context menu for displayed Web pages?

    Is there any way to edit the standard Firefox context menu for displayed Web pages? I frequently want to save a picture appearing on a page. Sometimes I "slip" and hit "Send Image" when I want "Save Image As", and have to sit and wait for a default send-mail page to come up, then close it, fiddling with its "are you sure" dialogs. This is a painful way to handle a slip-up. I basically NEVER want to e-mail an element directly from a page. Is there any way I can just delete "Send Image" from the context menu?

    You can remove entries in the context menu with code in the userChrome.css file
    *http://kb.mozillazine.org/userChrome.css
    Some IDs are listed in this MozillaZine Knowledge Base article:
    *http://kb.mozillazine.org/Chrome_element_names_and_IDs
    To find the ID of others you will have to use the DOM Inspector.
    * https://support.mozilla.org/kb/DOM+Inspector
    * https://developer.mozilla.org/En/DOM_Inspector
    * https://developer.mozilla.org/en/Introduction_to_DOM_Inspector
    * DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

  • I use to have pages on my mac and i can't find it now ,all the work i have done in the pass can't be edit any moor please help me

    i use to have pages on my mac and i can't find it now ,all the work i have done in the pass can't be edit any moor please help me

    - Why not redownload/reinstall Pages?
    - Maybe by
    http://answers.microsoft.com/en-us/office/forum/office_xp-word/how-do-i-open-mac -pages-in-a-microsoft-environment/5c0b2ab1-96d8-42e2-bf17-354bd0bfcf01
    - If you have an iCloud account, in a computer broser go to icloud.com>sign in>Pages Beta and upload to iCloud. You can then export/email in Microsoft and pdf format.

  • Why would I be unable to edit any page elements?

    During some problems upgrading to the latest version, I built a single web page, but now nothing on the page can be selected or edited. All the pages I created earlier can be edited. Is there a way to address this issue, or should I just try to recreate the page?
    I'm using this configuration on Mac 10.6.8:
    Public Beta 7.01
    v0.8, Build 841, CL766429
    Air Runtime 3.2.0.2070

    That explains why you can't edit it. You can only edit master page content in that master page, never on any of the local pages. The real issue then is why is your master page gray and undeitable? At this point I would guess it would be easier and less time consuming for you to just re-create it. That said, we'd still like to take a look at your file and try to figgure out if this is a corruption caused by the updating problems you were having or a bug that needs attention.
    We'll be able to take a look at the issue if you send your .muse file and a link to this topic to [email protected] If your file is larger than 20MB use a filesharing service like SendThisFile or Adobe SendNow.

  • I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)

    I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • Multiple pages that edit a single row

    I have searched on tabs and editing a single row using multiple pages and I am confused. I don't want to use java as I am trying to not learn that too...
    What I am trying to do sounds like it has been explained before but let me do this again...
    I have a record that is too large to fit on a single screen. This makes for a cumbersome entry process. The record is actually broken into four "logical" chunks. Main, Sub1, Sub2 and Sub3.
    I have made a list that will allow the record to be selected and call the first logical page... L1.
    I have made tabs that show all the pages and allow me to navigate between them quickly.
    When I get to L1 all the data is there. I may not change any data on that page and go directly to L2 through L4. However the record is not brought forward onto those pages. So the pages are not related (and I don't have the terminology right I know :) and I could "link" the pages. So here is what I would like the application to do;
    1. Display a list and allow the user to select the record to edit.
    2. Upon edit go to the first page (tab).. this works
    3. Allow the user to select a tab and the page displays the data for the record selected
    4. Allow the user to complete the edits and save the record. Upon save the user is returned to the list in step 1.
    I was thinking there are several ways to do it... but I was hoping someone could save me a bunch of trial and error (emphasis on the error) ...
    1. When navigating off the page save the record, pass the key and re-read the record... ugly huh?
    2. Pass all the session data for the record over to the next screen. Is that possible? e.g pxx_field1 = pyy_field1
    The the question was does a template with two level tabs keep the record data between tabs?
    Any help is greatly appreciated.
    Sam

    I think this works... kinda
    1. I have a "list" that allows the selection of the item to edit.
    2. That list opens a page that is the "header" page for a tab set.
    3. Each page in the tab set uses the same "ID" to read the record and display the columns. That is how it would work if the list called each individual page.
    4. I modified the "slave" tabs to have the "ID" of the "header" page.
    This displays the correct data on each page. And it looks like the "apply changes" button saves the changes on the page.
    Caveats inlclude (I think as I haven't done exhaustive testing"
    1. "apply changes" must be done at each page where there were changes or they would be lost.
    2. The first dispaly of the page is blank. Clicking on the tab a second time displays the data. This is true if it is the first time a user selects a record in a session (the "slave" tabs are blank) or if it is a subsequent record update (the "slave" tabs have the last records data.
    Thoughts... is this really boring to everyone but me?
    Sam

Maybe you are looking for