Cannot edit map!

Hi,
I have created a test table with data i.e. COUNTRY_NAME against SALES and can see that all the countries are shaded in white on the map in the compound layout (Navteq World Map data) when I select New View > Map within the Presentation services.
However, I cannot edit the map and it seems to be greyed out when I go to the edit screen for the map. I can see the map but cannot click on anything within the map or Map Format (right hand side column) in the compound layout "edit" screen!
Any ideas what the issue could be?
I assume it should be a simple thing I am missing as the map displays fine and I can drill in etc and the countries in my DW table are selected fine in the actual map within the compound layout but I just cannot edit anything in there from the edit screen i.e. the measure SALES does not seem to appear on the graph and I cannot colour fill the countries etc as a result.
Many thanks in advance!

This has been sorted out!
Basically you need to make sure in the RPD the Fact (measure) column has an aggregation value set to "Sum" so that the column is recognised as a Fact column i.e. the icon will go gold coloured.
This measure column will then be recognised in Answers as an measure column and will display on the map.
Cheers.

Similar Messages

Cannot properly edit Map Keys

In RoboHelp 7 for HTML (but also v6), weI have problems with
editing map keys for context-sensitive help.
When we were using RoboHelp 6 for Word, editing map keys was
easy.
When we switched to RoboHelp for HTML (first v6 then v7), we
could never figure out how to do this. We fully understand how map
keys work, and we are computer-savvy. However, perhaps we are
experiencing some kind of bug.
For example, if we generate a new topic, we disabled
automatic map key generation. Instead, we want to add our own map
key number to this new topic. We select Topic Properties >
Advanced > Edit Map Key to get to the map key editor. No matter
what we try, we cannot add a new map key to the new topic.
Similarly, changing the number of a map key is not possible.
Basically, the task buttons at the bottom of the Edit Map Key
screen are always disabled.
We are currently editing the map key files directly, but that
is not a solution of course.
We read the Help documentation very carefully, but we simply
cannot use these disabled task buttons, so that we are
stuck.

It is really a terrible dialog, but this is what works for
us:
1. Make sure you have the <Project Map File> selected
in the drop-down list.
2. In the right-hand list, click on the Topic you want to
assign an ID to.
3. Under the Map IDs list there is a "Hide used IDs"
checkbox, and then three buttons. The first button's icon does not
make ANY sense to me whatsoever, but it means "add map ID."
4. Click that cryptic-looking button. The Create/Edit Map ID
dialog opens.
5. Enter a name for the Topic ID (can be anything, just don't
use any spaces) and the Map Number you want to assign, and click
OK. The ID is assigned to the topic you selected earlier.
To edit the assigned Map ID number or name, double-click on
an ID in the Map IDs list. I don't know if you can actually change
the assignment of one of these IDs -- the "Unassign" button always
appears grayed out for me -- but you can delete a selected Map ID
by selecting it and clicking the "X" button.
Hope this helps!

Cannot edit Oracle Spatial data

Hello,
I am running into some problems with my Oracle Spatial data. Maybe somebody has some insight. Here's what is going on:
1) I am able to connect to and view the data in uDig but I cannot edit the data and also the data shows up in the table of contents with a line symbol even though it is polygon data (it renders correctly in the map as polygons). I try using the 'Create Polygon Geometries' tool and it errors saying 'Create Polygon Tool' cannot operate on current layer.
2) When I try testing edits through WFS-T it errors and tells me that the table is read only.
The table is in the USERS tablespace and I have verified that it is read/write. I also set object permissions on the user: ALTER, DELETE, INSERT, SELECT, UPDATE
Am I missing something obvious? Anyone else have this problem? Thanks a lot for any ideas anyone has.

My apologies for the confusion. My insert statement DID work just fine. I just wasn't seeing it...probably because I was querying the table in Enterprise Manager DB Control and it looks like it takes some time to refresh. So it appears that user permissions are not the issue.
I have used two data loading methods:
Before loading data, I needed to create a user defined coordinate reference system:
1 create projection operation for my custom projection
2 configure projection parameters
3 create the projected CRS in mdsys.sdo_coord_ref_system
First data load steps
1 shp2sdo.exe my_shapefile my_table -g geom -s 1000002 -v
2 execute my_table.sql
3 execute sqlldr.exe
4 EXECUTE SDO_MIGRATE.TO_CURRENT('my_table','GEOM');
5 CREATE INDEX my_table_index ON my_table(geom) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
Second data load steps:
1 open up MapBuilder, make a connection, and go through the Import Shapefile wizard. MapBuilder automatically creates a spatial index.
Does it appear that I am missing any steps or doing anything obviously wrong that would be causing me to not be able to edit the data through clients such as uDig or WFS-T?

Cannot edit JPG, GIF files stored in a SharePoint 2010 picture library

Created a SharePoint 2010 picture library to store .jpg, .gif images along with other types of images which were created using Adobe photoshop, Tiff etc.
Upon clicking on the .jpg, .gif files for editing purposes, they open in the browser instead of Photoshop so I cannot edit these files for this reason. Other types of image files are editable but not the jpg, gif files. File associations are already
in place for these files to open in Photoshop. Please advise.
Thank you,
Mahesh

You can change the default application that opens while you click open document using DocIcon.xml which is present on the web front ends. Please look at this link which explains what you need to update in order to take care of your requirement.
http://msdn.microsoft.com/en-us/library/ms463701.aspx
Hope this helps.
Thanks, Mayur Joshi Blog: http://splearnings.blogspot.com/

I cannot edit my contacts after upgrading to IOS5 .

I cannot edit my contacts after upgrading to IOS5 . I can restore to factory settings but I want to keep my messages as they were.. what can I do? please someone help.. thanks in advance.

HI MortenEJ,
Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
I still encounter the same problem. I have important messages in my inbox I want to keep.
I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

Cannot Edit Captions in One File

Hello,
I'm using Captivate 3, and I have this one project file that I cannot edit the captions in. I wasn't having this problem until I imported a slide from another project. Ever since the slide imported, I haven't been able to edit the text captions. When I double click on the caption I want to edit, nothing happen. If I click once on the caption to highlight it, and go to the menu and click on an option to edit the caption, nothing happens. Captivate is only doing this on the project which I imported a slide, every other project I have opened works fine. I tried to save the file as a different name, and I still get the same result. Does anyone have any other ideas? Am I not doing something right? Thanks in advance for the help!

Hello,
Could be that the CP-file or objects have become corrupted. I'd recommend creating a new blank file with the same resolution, and copy and paste the slides to this new file. Better not all at once, so that you could perhaps find the "guilty slide".
Lilybiri

I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

Cannot edit Reminders in iCal

I cannot edit some of the Reminders in iCal on my MacPro. I tried to figure out what's different about the ones I can't edit, and it may be that they are set to "repeat every day" - I can change them on my iPhone with the Reminders app, but it doesn't make sense to me that I can't change that on my computer. I'd like to end the repeat every day w/out having to use my iPhone.
Does anyone know what's the problem - is it fixable?
Thanks

Please, please, please, report the issue that both alarms and due dates at the same time are not possible as a bug here:http://www.apple.com/feedback/iphone.html. The more people who submit it, the more likely apple will listen.

When I get an ICS from Outlook that is a multi-day event it populates my iCal as a single day and since I am not the owner I cannot edit the ICS.

When I get an ICS from Outlook Express (Office is PC based) that is a multi-day event, it populates my iCal as a single day and since I am not the owner I cannot edit the ICS. I have to delete it and send a "decline notice" to the sender and re-enter it so I can put in multiple day events. Help!

If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

Business Data List View ONLY Displays records - Cannot Edit them

Using SharePoint 2010, I created an External Content Type. Data is coming from SQL Server. I created a new Read operation on my External Content type. I added a few filters in this Read View.
I have created a web part page in which I placed a Business Data List Web Part. In Web Part properties I chose the VIEW in question. I can now filter my External List data and the Business Data List Web Part displays them. But I cannot edit these
records!!!
From the web Part properties window, I can ONLY choose Views that are created from READ operations. How do I allow users to edit data and save data in the original source (SQL Server).
Mayank

Below are the reference links on how to CRUD operations on external data using BCS
CRUD operations using BCS using SharePoint designer
http://zimmergren.net/technical/sp-2010-getting-started-with-business-connectivity-services-bcs-in-sharepoint-2010
CRUD operations using BCS using Visual studio
http://www.c-sharpcorner.com/uploadfile/anavijai/creating-external-content-type-with-crud-operations-using-business-data-connectivity-model-in-sharep/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Users cannot edit a shared calendar of a shared mailbox that was deleted from the cloud and recreated on premise

Description:
The following example account [email protected] is an on premise AD account being used as a shared mailbox in the cloud. We have discovered that regardless of what we do, not a single user can edit the calendar entries.
The following message is shown in Outlook Click to Run 2013 when an entry. "New appointment" button is also greyed out, including "Calendar Permissions" and some others.
This problem started when the shared mailbox was created wrongly by creating it in the cloud first and we had to delete it and start over. The "in the cloud" user was deleted and the same user was created in AD on-premise with the same account name
and then Dir Synced with the cloud. A license was assigned, a user mailbox on exchange online created and the type was converted to a shared mailbox and Editor rights were defined on the calendar folder for specific users.
Actions performed:
Action01: gave users Editor rights on calendar folder through powershell
Result01: Rights correctly added and can be seen when get-mailboxfolderpermission is ran
Action02: Opened calendar with Outlook and tried to edit entries
Result02: Error message pops up saying "You don't have permission to create an entry in this folder. Right click the folder and check..."
Action03: Opened calendar with OWA of users
Result03: Users can edit the shared calendar on OWA
Action04: Gave users Full Access permission on mailbox with automapping on
Result04: Users can edit calendar in Outlook
Action05: Gave users Full Access permission on mailbox with automapping off (mailbox no longer visible in outlook)
Result05: Users cannot edit calendar in Outlook
Action06: Removed Full Access permission on mailbox for users
Result06: User cannot edit calendar in Outlook
Action07: Removed [email protected] from on-premise AD, performed dirsync, removed account from ms online using remove-msoluser -removefromrecyclebin
Result07: No trace of the account was anywhere to be found.
Action08: Created new [email protected] account on on-premise AD, assigned o365 license to user including exchange online license
Result08: New empty Exchange online mailbox was created
Action09: gave users Editor rights on calendar folder through powershell
Result09: Rights correctly added and can be seen when get-mailboxfolderpermission is ran
(Note: whenever mailboxfolder permissions are modified for this mailbox it's as if they are ran THREE times in a row, the first time they are applied and the powershell gives immediately 3 exceptions behind this:
An existing permission entry was found for user: [email protected]
    + CategoryInfo          : NotSpecified: (:) [Add-MailboxFolderPermission], UserAlreadyExis...nEntryException
    + FullyQualifiedErrorId : [Server=DBXPR05MB046,RequestId=3b3e080e-9aaf-4db9-9b90-b7171d59eba2,TimeStamp=7/11/2014
   8:15:39] [FailureCategory=Cmdlet-UserAlreadyExistsInPermissionEntryException] 57078FCD,Microsoft.Exchange.Manageme
nt.StoreTasks.AddMailboxFolderPermission
    + PSComputerName        : outlook.office365.com
Any other mailbox does not do this when setting mailboxfolder permissions)
Action10: Opened calendar with Outlook and tried to edit entries
Result10: Error message pops up saying "You don't have permission to create an entry in this folder. Right click the folder and check..."
Action11: Tried on a fresh new pc with first time logon
Result11: did not help
Additional information:
We have seen this problem with another user which was recreated, when he shares his calendar with others and people get the calendar invite email and click "Open Calendar" they receive a popup "The folder cannot be found".
My first impression points to a corruption/bug in the GAL on exchange online, since we're using o365 for midsize bussinesses we cannot use the AdressList role to expose the adresslist cmdlts for deeper troubleshooting.
PS:
Issue tested on different computers and with different user accounts, not a single user can edit the calendar of [email protected] when editor rights are given.
Noticed when editing rights for the shared mailbox in powershell after the first confirmation line
Office 2013 is click to run was updated to latest version, version number: 15.0.4659.1001

Greetings Gil,
I haven't heard of that one.
Questions:
Does the calendar in question show up in the "Subscriptions" category of iCal?
If you remove all accounts from iCal > Preferences > Accounts and quit and re-open iCal, does the calendar in question vanish? If so, does the calendar come back when you re-input the servers you need into iCal > Preferences > Accounts?
Can you provide a screen shot of your calendar sidebar.
While you answer those questions, some troubleshooting to try:
Try dragging one of your other calendars above this calendar that won't delete and then quit / re-open iCal and attempt to delete the calendar in question.
Failing that:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
4. Launch iCal and test.
If the issue persists at this point:
Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Hope that helps!

Cannot edit any roles in CUP5.2 due to "Enter a valid Role Name" error

We are running CUP 5.2.
I am having a problem with our Roles after they were uploaded into CUP; I cannot make any changes to the Role Details because CUP returns an error stating that our Role Names are invalid.
First I uploaded the roles (I continued to receive errors when trying to use the template, so I did them by uploading with the "Selected Roles" option).
Once they were uploaded, from the menu, I select: Roles --> Search Role and then I choose a role from the resulting list. When the next screen appears (the "Role Details" screen), I added all of the respective details (Business Process, Sub-Process, Detailed Description, Role Approver, Functional Area, etc.). When I pressed the SAVE button, I received the following error:
Please correct the following errors:
Please enter a valid "Role Name". Only Alpha-numeric, Space or Underscore characters are allowed
So I realize what the problem is - the "Role Name" field is automatically populated with our security role name as it exists in our SAP system ... and because our security roles all begin with Z:, it does not follow the CUP naming convention.
I'd like to just update the "Role Name" field but when you are in the "Role Details" screen, the "Role Name" field cannot be edited.
I saw the "Export" button and used that, in an attempt to edit the file to replace each occurence of Z: with Z_, and then upload it again.
So I updated the file accordingly, and then did an upload, selecting the "Overwrite Existing Roles" box.
It returned a successful message:
Import Status: 133 successfully imported out of 133 records found
Yet, when I go back to the list of roles, the roles still exist as Z: instead of Z_ so I still cannot edit any of the roles to add the required details ... has anyone had a similar issue and know how to work around this?
Thanks!

Hello Alpesh,
Thank you for replying!
I had already tried to export the roles and replaced the Z: with Z_ before creating this message, but the upload attempts failed due to the explanation above. But this time, I followed your (good) advice to delete the original Z: roles first, before uploading the corrected file.
Sadly, even after I deleted the original Z: roles prior to uploading the corrected file, I am still having no luck ... when I uploaded the file, again it (falsely) reports that the import was successful:
Import Status: 133 successfully imported out of 133 records found
After seeing that message, I quickly checked the roles, and none of the roles had uploaded. So now I have ZERO roles.
Any further ideas? I am thinking it may be something very small that is being overlooked ... perhaps certain buttons must be selected/not selected on the import screen? Or could it be an issue with the file itself?
When I do the import, I only select the button for "From File ..." and retrieve the file from my desktop via the Browse button. I do not select any other button, nor do I make a selection from the System or Role Source boxes. I have just selected that one button only ... I've tried it with and without checking the "Overwrite Existing Roles" box, but neither one works.
The part that bugs me the most is that I receive what I perceive to be an inaccurate/bogus "successful" status each time I attempt the upload of the file. At least if I had an error message, I might have something to work with to troubleshoot this.

I transferred all my Itunes music from an old PC to my new one with Windows 7. Now I cannot edit "artist" or anything else for the songs. It is all greyed out and I cannot enter information. Is there any way to correct this problem?

I transferred all of my music from an older PC to my new one with Windows 7. Now I cannot edit selected songs. The information is greyed out and I can't type over it (on all my music except NEW downloads). Can anyone help? I even have a few songs with NO artist tag and I can't write anything in them either.

It's a permissions problem. Try this: right click on your iTunes icon and choose "run as administrator" that might fix it.

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

Map ID not appearing in "Edit Map IDs" dialog box

I have RH HTML 8. I am adding new topics and assigning map IDs to those topics via the Edit Map IDs dialog box.
All of my map IDs appear in the BSSCdefault.h file as well as the project's .hm file. I even manually added the topic string to the project's ali file. However, it is not appearing in the Edit Map IDs dialog box. If it's not appear there, where does this dialog box get the map strings and map IDs from?
No FARP685 string:

Peter,
I think your discussion of this problem could explain the situation and propose a workaround more simply than it does.
Based on your article, I assumed that Robo displays only the built in Word list styles such as List and List Continue (since those were the only styles showing up in the style mapping dialog and since your example shows matching a Robo style named List Mapping to a Word built in style named List). I assumed I would have to match my Bullet style to a style named List in Word, and match the indented bullet style to List 2, and so on. The actual situation is that Robo, for some godforsaken reason that only idiots would understand, will not show a Word style if any numbering (bullets or numbers) is applied to it. That is, one does not have to avoid a class of styles called “List styles”, one only has to avoid applying numbering to the styles until later.
Thus the workaround is to create the word styles (with names that match the Robo styles!) that contain every attribute you need EXCEPT the numbering. That is, I can link Bullet to Bullet and Number to Number and Indented Number to Indented Number, and so on and on, as long as I have all the Word styles in the template with their numbering set to None.
Then after I generate the document, I can modify the styles to add the appropriate numbering, and voila!
Currently scrolling the doc & modifying styles. Might be a glimpse of daylight.
John
From: Peter Grainge [email protected]
Sent: Thursday, October 13, 2011 8:47 AM
To: John Dawson
Subject: Word styles not appearing in Print Document Appearance dialog
Re: Word styles not appearing in Print Document Appearance dialog
created by Peter Grainge<http://forums.adobe.com/people/Peter+Grainge> in RoboHelp - View the full discussion<http://forums.adobe.com/message/3969382#3969382

Cannot edit map!

Similar Messages

Maybe you are looking for