Cannot Edit "My Number" Field in Facetime

Hello,
I'm facing a problem in Iphone 4. I cannot edit "My Number" Field under settings / phone
The field shows - UNKNOWN and cannot be edited ????
When I click on it - nothing happens.
Kindly help.

umairhameed wrote:
I'm not so sure about that, becoz I have another iphone 4 working on the same courier and in that iphone I can edit my number field
OK - in that case, I'm sorry to say that I don't know why. Have you tried a restart to see if that clears it?

Similar Messages

  • Cannot edit PDF form fields

    Windows 8.1, IE 11, Acrobat Reader (11.0.10), Acrobat Pro X1 (11.0.10)
    I received a PDF that contains what are supposedly editable form fields. When I open the document in Adobe Reader (11.0.10), a green bar appears above the top of the document stating that "This file includes fillable form fields. You can print the completed form and save it to your device of Acrobat.com", however, I am unable to type into any of the fields. Its document properties indicate that the file has "No Security", and that all operations are marked as "Allowed". I click "Highlight Existing Fields" and all the fields (dozens of them) appear highlighted, as expected. I simply cannot enter any data into the form.
    To investigate further, I opened the file in Acrobat XI (11.0.1), and enter Form editing mode (Tools->Forms->Edit).  I am unable to directly edit the form fields by clicking on them directly. There doesn't seem to be any invisible graphic layered on top of everything. The individual fields almost seem "disabled". I can, however see the list of fields in the navigation pane, and click on them individually from there and bring up their properties and modify them that way. I have checked the field properties and they all seem to be enabled, not locked, not read-only, etc...so I am at a loss as to what is preventing this form from being filled out in Reader, or edited normally in Acrobat.
    Additional info: I checked the document properties, (Document Propertied-->Description) and in the "Advanced" section, the PDF producer says that the PDF version is 1.6 (Acrobat 7.x) so I suspect this might be part of the problem. I therefore did a "Save as other...-->Reader Extended PDF-->Enable More Tools" as an attempt to upgrade the file, but that didn't help.
    Any help appreciated!

    GKaiseril wrote:
    Most users see a purple bar. I would try to repair reader.
    Actually, it has been replaced with a green bar in recent versions:

  • Cannot edit phone number from dialer

    How can you edit a phone number in the dialer if it originally came from a text message?

    I would like to add *67 to the front of the number.

  • Batch number field in Handling Unit detail (VT01N) is not editable

    Hi, Does anyone know how to turn the batch number field (screen field HUMV4-CHARG in program SAPLV51G screen 6410) editable?
    Right now, it is not allow us to specify the batch for delivery line item if there are multiple batches for the same line item when the item is packed into a handling unit.
    The batch number is in the delivery table but it will not come into the shipment table when the delivery is added to the shipment, nor the field is editable for user input.
    Please help!
    Thank you,
    Minami

    HI,
    If you are doing online check for userexits/customer exits....
    For userexits u can check in the subroutines node in se80(Program->SAPMV50A)....Please check the same.
    for customer exits ->SMOD->F4 help->Specify the package as 'VL' and see the ehnacements and then the funtion exits.
    Regards,
    Nagaraj

  • I have created numerous forms in Designer and for some reason, "Edit in Designer" from PDF, I cannot edit any of the fields in Design View.

    I have created numerous forms in Designer and for some reason, "Edit in Designer" from PDF, I cannot edit any of the fields in Design View.

    Is it possible you accidentally put the fields on the master page?

  • Copy & Paste into Dialer - Cannot Edit Number!

    I am curious as to why the supposed enhancement to enabling you to paste a number into the Dialer app does not allow you to edit the number once pasted. I do a lot of international calls and people send out email invites (especially US based people) and they send the number as 1 xxx xxx xxxx, omitting the + from the start, which international caller require.
    In previous versions of the OS you could select the number as a link and it would ask you if you wanted to call the number. I had hoped that the cut & paste ability would allow you to paste the number and then edit it to insert the + sign.
    As this is not available I do not see what the excitement is with cut & paste in the Dialer app.
    These little things make all the difference in usability!

    Clearly Apple's developer beta testers did not do enough research on copy past into the dialer pad for INT'L capabilities
    Since they're in so many countries...I'm sure this will be an update soon to follow...
    Apple is "rumored" to read the forums for high level observation ONLY...meaning they may check to see that they have 250 posts on bad battery life after an update...but NEVER reply to the poster...
    In a few articles I've read on Appleinsider.com it is said that some posters actually got emailed at the email they listed in their user profile to answer a follow up question Apple had...this I'm sure is very RARE though and probably would only happen if a specific step or user action needed to be understood to duplicate an error or issue...

  • If I copy a number to dial pad I cannot edit or anything in between

    I Cannot edit or add anthing in dial pad

    That is true, it is not possible in the dial pad, but you can easy edit numbers by using the notes, contacts, messages Apps etc.
    If I need to edit a phonenumber from dial pad I just copy it into Spotlight, wich can be directly opened in dial pad.
    Charly

  • Cannot edit purcahse order quantity column in SAP b1 8.8

    Hello experts,
           I am facing a small problem...I have created a list of items in the item master. I enter those items in the purchase order blanket.. So by default the quantity is set to 1 for the corresponding item.. When i try to edit the quantity column a message is flashed saying  " Cannot edit".. now when i enter the same quantity using the calculator in the quantity field i am able to get the desired number on the row..but again i get a message saying that "cannot edit" .
    I am doing this entry in the manager mode.If i do the same process using another user id which do not have any managerial rights, i do not get any sort of error..
    Kindly help me solve this problem
    Regards
    Shyam

    Hi Rahul,
    Got the concept....We have not used any stored procedures for validation....we have just restricted access using normal authorizations....i being a super user, am not able to edit
    Regards
    Shyam

  • Gettin error Cannot convert to number in RTF Template

    Hi,
    I am working on xml template development i am getting the followinf error
    Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
    Run XDO Start
    RTFProcessor setLocale: en-us
    FOProcessor setData: D:\Tickets\Remittance Advice XMLP\canada_report1.xml
    FOProcessor setLocale: en-us
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:586)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:383)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:201)
         at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:161)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1015)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:968)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:209)
         at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1561)
         at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:951)
         at RTF2PDF.runRTFto(RTF2PDF.java:626)
         at RTF2PDF.runXDO(RTF2PDF.java:460)
         at RTF2PDF.main(RTF2PDF.java:251)
    Caused by: oracle.xdo.parser.v2.XPathException: Cannot convert to number.
         at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1526)
         at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:517)
         at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:485)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:264)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:150)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:187)
         ... 16 more
    I have checked the code and problem was due to following code i dont know where i went wrong
    <xsl:variable xdofo:ctx="incontext" name="inner_group" select=".//G_SEL_INV_DATA"/><?for-each:$inner_group?><?if:(position()-1) mod $no_of_lines_per_page=0?><xsl:variable name="first_rec" xdofo:ctx="incontext" select="position()"/>
    Please help me to solve this issue...
    Thanks
    Rajesh

    What was the problem in the template? I am facing the same error, when I put a conditional in the data field, it throws the XML-22036: (Error) Cannot convert to number.
    error, where if the element was printed directly it works fine.
    error
    <Line 984, Column 130>: XML-22036: (Error) Cannot convert to number.
    @Line 984 ==> <xsl:variable name="v148" select="format-number(string(xdoxslt:one($v147)), string('###0.00'), string('_DECIMALFORMAT'))"/>
    End of Process.
    <format>
    Number, ###0.00
    <DATA >BROKEN
    If (to_number(../DocumentPayableCount) + to_number(Extend/NumberOfPO) + sum(to_number(../DocumentPayable/Extend/Commentlength))) <= 7 then Extend/InvoiceAmount end if
    <DATA >ALSO BROKEN
    If (../DocumentPayableCount + Extend/NumberOfPO + sum(../DocumentPayable/Extend/Commentlength)) <= 7 then Extend/InvoiceAmount end if
    <DATA> WORKS
    then Extend/InvoiceAmount

  • MIGO tr Serial number field and table?

    Hi guys,
                  can anybody tell me how to find the field name and table for Serial number in MIGO tr Code?
                     in MIGO the Serial number field and Structure are GOSERIAL-SERIALNO.but i was not able to find the Actucal Field name and table where i can get the values based on PO and Asset Number's?
    Thanks,
    Gopi.

    Hello,
    I'm looking at the same problem here. I found the table SER03 in which you can enter the the material document. This returns 1 line in this table and from this one you need the OBKNR element
    You can copy this data and paste it into table OBJK element OBKNR and this returns all serialnumbers for the relevant material document.
    My problem is that i can't get these items on the sapscript. (WESCHEINVERS 1,2 or 3)
    Greetings
    Edited by: Lode Vandecruys on Apr 9, 2008 11:04 AM
    Edited by: Lode Vandecruys on Apr 9, 2008 11:09 AM

  • What is the use of Withholding tax identification number field?

    Hello SAP Experts,
    I posted this question earlier but had to close because of no replies from anybody. Posting it again to see if I am lucky to get some answer this time.
    Can someone tell what is the use of field Withholding Tax Identification Number? Does it help with the reporting? Where does it get populated on the report if given at vendor or master record or within the withholding tax customization for company code? What is the difference between creating it in the customization for withholding tax information for company code and vendor/customer master record?
    As per SAP:  Withholding tax identification number
    This is a number issued by the tax authorities per withholding tax type.
    This number must be specified in Customizing either:
    (a) As part of the withholding tax information defined for the company code, or
    (b) As part of the withholding tax information defined in the customer or vendor master record.

    Hi Pete,
    The only thing that I could check is the content used in US:
    See content of this field for US:
    LFA1-STCD1      Social security number
    LFA1-STCD2      Employer identification number
    LFBW-WT_WTSTCD  Withholding tax identification number for WT Type
    In order to populate it, please kindly check the following:
    The reason why you cannot fill in the field WT_WTSTCD in transaction
    Fk02 however you can do it in XK02 (Change vendor centrally) can be due
    to wrong customizing of the field status group.
    Kindly check the following:
    SPRO->
    Finantial accounting -> Accounts receivable and accounts payable ->
    Define screen layout per activity (vendors) -> Change Vendor(Accounting)
    Company code data -> W/holding tax data, w/h tax 2 ->
    FIELD Withholding tax code,w/h tax 2 will be probably just available to
    display. Please, change it to optional entry.
    I hope I could be of assistance.
    Kind Regards,
    Fernando Evangelista

  • How can I merge 3 or more individual text fields into an editable summary text field?

    I am stuck and do not know where to begin. I am self taught in using Adobe LiveCycle and have found many answers here in the forums and via trial and error.
    I cannot find or create the correct java script or form calc to feed multiple text fields into one text field.  My supervisor is asking me to do this for two sections of a form I created using Adobe LiveCycle Designer ES 8.2.
    1)       Merge all 3 user entered text fields to an user editable summary text field at the end of the form.
    2)       Merge all 24 user entered text fields to an user editable summary text field at the end of the form.
    Since they are all individual text fields in response to various questions, I cannot use the global binding function. I do not want the summary text field to override the individual text fields.
    Here is the java scripting I placed on Show: calculate* Language: javascript Run: at client
    1) PDStrengthWeaknessComments.rawValue + "_" + OCStrengthWeaknessComments.rawValue + "_" + CEBAStrengthWeaknessComments.rawValue;
    Needless to say, these instructions are not working on my form. Would someone with a lot of experience or an IT degree kindly help me?

    I just tried adding the front end as you suggested and confirmed that the Object > Value is set to "calculated - user can override" for the summary text field.
    OverallAnalysisAppFeedback.rawValue = PDStrengthWeaknessComments.rawValue + "_" + OCStrengthWeaknessComments.rawValue + "_"  + CEBAStrengthWeaknessComments.rawValue;
    I was still unsuccessful.
    I opened the debugger and received the following information. I do not understand what AdobeLiveCycle is asking me to define.
    PDStrengthWeaknessComments is not defined
    1:XFA:GARP2011NewRecompeteSRW[0]:Page20-OverallAnalysisAppFeedback[0]:AllOverallAnalysis[0 ]:calculate
    PDStrengthWeaknessComments is not defined
    1:XFA:GARP2011NewRecompeteSRW[0]:Page20-OverallAnalysisAppFeedback[0]:AllOverallAnalysis[0 ]:calculate
    Budget1Comments is not defined
    1:XFA:GARP2011NewRecompeteSRW[0]:Page21-OverallAnalysisAppFeedback-Budget[0]:AlBudgetQs[0] :calculate
    Budget1Comments is not defined
    1:XFA:GARP2011NewRecompeteSRW[0]:Page21-OverallAnalysisAppFeedback-Budget[0]:AlBudgetQs[0] :calculate
    Do you have any additional tips or suggestions?

  • Users cannot edit a shared calendar of a shared mailbox that was deleted from the cloud and recreated on premise

    Description:
    The following example account [email protected] is an on premise AD account being used as a shared mailbox in the cloud. We have discovered that regardless of what we do, not a single user can edit the calendar entries.
    The following message is shown in Outlook Click to Run 2013 when an entry. "New appointment" button is also greyed out, including "Calendar Permissions" and some others.
    This problem started when the shared mailbox was created wrongly by creating it in the cloud first and we had to delete it and start over. The "in the cloud" user was deleted and the same user was created in AD on-premise with the same account name
    and then Dir Synced with the cloud. A license was assigned, a user mailbox on exchange online created and the type was converted to a shared mailbox and Editor rights were defined on the calendar folder for specific users.
    Actions performed:
    Action01: gave users Editor rights on calendar folder through powershell
    Result01: Rights correctly added and can be seen when get-mailboxfolderpermission is ran
    Action02: Opened calendar with Outlook and tried to edit entries
    Result02: Error message pops up saying "You don't have permission to create an entry in this folder. Right click the folder and check..."
    Action03: Opened calendar with OWA of users
    Result03: Users can edit the shared calendar on OWA
    Action04: Gave users Full Access permission on mailbox with automapping on
    Result04: Users can edit calendar in Outlook
    Action05: Gave users Full Access permission on mailbox with automapping off (mailbox no longer visible in outlook)
    Result05: Users cannot edit calendar in Outlook
    Action06: Removed Full Access permission on mailbox for users
    Result06: User cannot edit calendar in Outlook
    Action07: Removed [email protected] from on-premise AD, performed dirsync, removed account from ms online using remove-msoluser -removefromrecyclebin
    Result07: No trace of the account was anywhere to be found.
    Action08: Created new [email protected] account on on-premise AD, assigned o365 license to user including exchange online license
    Result08: New empty Exchange online mailbox was created
    Action09: gave users Editor rights on calendar folder through powershell
    Result09: Rights correctly added and can be seen when get-mailboxfolderpermission is ran
    (Note: whenever mailboxfolder permissions are modified for this mailbox it's as if they are ran THREE times in a row, the first time they are applied and the powershell gives immediately 3 exceptions behind this:
    An existing permission entry was found for user: [email protected]
        + CategoryInfo          : NotSpecified: (:) [Add-MailboxFolderPermission], UserAlreadyExis...nEntryException
        + FullyQualifiedErrorId : [Server=DBXPR05MB046,RequestId=3b3e080e-9aaf-4db9-9b90-b7171d59eba2,TimeStamp=7/11/2014
       8:15:39] [FailureCategory=Cmdlet-UserAlreadyExistsInPermissionEntryException] 57078FCD,Microsoft.Exchange.Manageme
      nt.StoreTasks.AddMailboxFolderPermission
        + PSComputerName        : outlook.office365.com
    Any other mailbox does not do this when setting mailboxfolder permissions)
    Action10: Opened calendar with Outlook and tried to edit entries
    Result10: Error message pops up saying "You don't have permission to create an entry in this folder. Right click the folder and check..."
    Action11: Tried on a fresh new pc with first time logon
    Result11: did not help
    Additional information:
    We have seen this problem with another user which was recreated, when he shares his calendar with others and people get the calendar invite email and click "Open Calendar" they receive a popup "The folder cannot be found".
    My first impression points to a corruption/bug in the GAL on exchange online, since we're using o365 for midsize bussinesses we cannot use the AdressList role to expose the adresslist cmdlts for deeper troubleshooting.
    PS:
    Issue tested on different computers and with different user accounts, not a single user can edit the calendar of [email protected] when editor rights are given.
    Noticed when editing rights for the shared mailbox in powershell after the first confirmation line
    Office 2013 is click to run was updated to latest version, version number: 15.0.4659.1001

    Greetings Gil,
    I haven't heard of that one.
    Questions:
    Does the calendar in question show up in the "Subscriptions" category of iCal?
    If you remove all accounts from iCal > Preferences > Accounts and quit and re-open iCal, does the calendar in question vanish? If so, does the calendar come back when you re-input the servers you need into  iCal > Preferences > Accounts?
    Can you provide a screen shot of your calendar sidebar.
    While you answer those questions, some troubleshooting to try:
    Try dragging one of your other calendars above this calendar that won't delete and then quit / re-open iCal and attempt to delete the calendar in question.
    Failing that:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Go to iCal > Quit iCal
    3. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    4. Launch iCal and test.
    If the issue persists at this point:
    Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Hope that helps!

  • Cannot edit any roles in CUP5.2 due to "Enter a valid Role Name" error

    We are running CUP 5.2.
    I am having a problem with our Roles after they were uploaded into CUP; I cannot make any changes to the Role Details because CUP returns an error stating that our Role Names are invalid.
    First I uploaded the roles (I continued to receive errors when trying to use the template, so I did them by uploading with the "Selected Roles" option). 
    Once they were uploaded, from the menu, I select:    Roles --> Search Role    and then I choose a role from the resulting list.  When the next screen appears (the "Role Details" screen), I added all of the respective details (Business Process, Sub-Process, Detailed Description, Role Approver, Functional Area, etc.).   When I pressed the SAVE button, I received the following error:
    Please correct the following errors:
    Please enter a valid "Role Name". Only Alpha-numeric, Space or Underscore characters are allowed
    So I realize what the problem is - the "Role Name" field is automatically populated with our security role name as it exists in our SAP system ... and because our security roles all begin with Z:, it does not follow the CUP naming convention. 
    I'd like to just update the "Role Name" field but when you are in the "Role Details" screen, the "Role Name" field cannot be edited.
    I saw the "Export" button and used that, in an attempt to edit the file to replace each occurence of Z: with Z_, and then upload it again.
    So I updated the file accordingly, and then did an upload, selecting the "Overwrite Existing Roles" box.
    It returned a successful message:
    Import Status: 133 successfully imported out of 133 records found
    Yet, when I go back to the list of roles, the roles still exist as Z: instead of Z_ so I still cannot edit any of the roles to add the required details ...  has anyone had a similar issue and know how to work around this?
    Thanks!

    Hello Alpesh,
    Thank you for replying!
    I had already tried to export the roles and replaced the Z: with Z_ before creating this message, but the upload attempts failed due to the explanation above.  But this time, I followed your (good) advice to delete the original Z: roles first, before uploading the corrected file.
    Sadly, even after I deleted the original Z: roles prior to uploading the corrected file, I am still having no luck ... when I uploaded the file, again it (falsely) reports that the import was successful:
        Import Status: 133 successfully imported out of 133 records found
    After seeing that message, I quickly checked the roles, and none of the roles had uploaded.  So now I have ZERO roles.
    Any further ideas?  I am thinking it may be something very small that is being overlooked ... perhaps certain buttons must be selected/not selected on the import screen?  Or could it be an issue with the file itself?
    When I do the import, I only select the button for "From File ..." and retrieve the file from my desktop via the Browse button.  I do not select any other button, nor do I make a selection from the System or Role Source boxes.  I have just selected that one button only ... I've tried it with and without checking the "Overwrite Existing Roles" box, but neither one works.
    The part that bugs me the most is that I receive what I perceive to be an inaccurate/bogus "successful" status each time I attempt the upload of the file.  At least if I had an error message, I might have something to work with to troubleshoot this.

  • Can we edit Gross Price field in Sales Order

    Hi experts,
    According Help document (help - under Sales A/R/Sales Order-Sales document content tab ) as follows, userwe should be able to edit gross price field in Sales order
    Enter in this field the unit price including tax. SAP Business One calculates automatically the unit price before tax and the tax amount, based on the tax code in the row. After pressing the TAB key, the Unit Price field and the Tax/Unit field are updated accordingly.
    The tax amount is calculated as follows:
    *Gross Price / (1 + Tax %) * Tax % = Tax Amount*
    But when I set up in form setting visible and active for Gross Price,  though I AM NOT ABLE TO EDIT GROSS PRICE FIELD
    Is it bug in SAP ? I
    BR
    Samir Gandhi

    Hi Samir Gandhi,
    You may check SAP Note Number: 1060666 to see if it applies to you.
    Thanks,
    Gordon

Maybe you are looking for